| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <546D2BC0.8020208@samsung.com>
Date: Thu, 20 Nov 2014 08:46:08 +0900
From: Beomho Seo <beomho.seo@...sung.com>
To: Lee Jones <lee.jones@...aro.org>
Cc: linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, sameo@...ux.intel.com,
lee.jone@...aro.org, lgirdwood@...il.com, broonie@...nel.org,
sre@...nel.org, dbaryshkov@...il.com, dwmw2@...radead.org,
robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
cw00.choi@...sung.com, geunsik.lim@...sung.com,
inki.dae@...sung.com, sw0312.kim@...sung.com,
beomho.seo@...sung.com
Subject: Re: [PATCH v5 1/4] mfd: rt5033: Add Richtek RT5033 driver core.
On 11/20/2014 01:37 AM, Lee Jones wrote:
> On Wed, 19 Nov 2014, Beomho Seo wrote:
>
>> This patch adds a new driver for Richtek RT5033 driver.
>> RT5033 is a Multifunction device which includes battery charger, fuel gauge,
>> flash LED current source, LDO and synchronous Buck converter. It is interfaced
>> to host controller using I2C interface.
>>
>> Cc: Samuel Ortiz <sameo@...ux.intel.com>
>> Cc: Lee Jones <lee.jone@...aro.org>
>> Signed-off-by: Beomho Seo <beomho.seo@...sung.com>
>> Acked-by: Chanwoo Choi <cw00.choi@...sung.com>
>> ---
>> Changes in v5
>> - Change possible built as a module.
>> - Revise rt5033_dev mfd cell entry.
>> - Fix incorrect typo.
>> - Add module alias.
>>
>> Changes in v4
>> - none.
>>
>> Changes in v3
>> - Correct sentence errors.
>> - Add author information the top of each drivers.
>> - Remove unnecessary pre-initialise, struct member(rt5033->i2c) and blink.
>> - Change some return check.
>> - Use bool and of_match_ptr().
>>
>> Changes in v2
>> - Remove volatile_reg callback. Because this driver not in use regmap cache.
>> - Revmoe unnecessary subnode of_compatible.
>> - Add define for set_high impedance mode of charger.
>> ---
>> drivers/mfd/Kconfig | 12 ++
>> drivers/mfd/Makefile | 1 +
>> drivers/mfd/rt5033.c | 136 +++++++++++++++++++
>> include/linux/mfd/rt5033-private.h | 260 ++++++++++++++++++++++++++++++++++++
>> include/linux/mfd/rt5033.h | 62 +++++++++
>> 5 files changed, 471 insertions(+)
>> create mode 100644 drivers/mfd/rt5033.c
>> create mode 100644 include/linux/mfd/rt5033-private.h
>> create mode 100644 include/linux/mfd/rt5033.h
>>
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index 72d3808..9c13170 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -618,6 +618,18 @@ config MFD_RTSX_PCI
>> types of memory cards, such as Memory Stick, Memory Stick Pro,
>> Secure Digital and MultiMediaCard.
>>
>> +config MFD_RT5033
>> + tristate "Richtek RT5033 Power Management IC"
>> + depends on I2C=y
>> + select MFD_CORE
>> + select REGMAP_I2C
>> + help
>> + This driver provides for the Richtek RT5033 Power Management IC,
>> + which includes the I2C driver and the Core APIs. This driver provides
>> + common support for accessing the device. The device supports multiple
>> + sub-devices like charger, fuel gauge, flash LED, current source,
>> + LDO and Buck.
>> +
>> config MFD_RTSX_USB
>> tristate "Realtek USB card reader"
>> depends on USB
>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> index 53467e2..4059c24 100644
>> --- a/drivers/mfd/Makefile
>> +++ b/drivers/mfd/Makefile
>> @@ -176,6 +176,7 @@ obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
>> obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
>> obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
>> obj-$(CONFIG_MFD_DLN2) += dln2.o
>> +obj-$(CONFIG_MFD_RT5033) += rt5033.o
>>
>> intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
>> obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
>> diff --git a/drivers/mfd/rt5033.c b/drivers/mfd/rt5033.c
>> new file mode 100644
>> index 0000000..4d289b9
>> --- /dev/null
>> +++ b/drivers/mfd/rt5033.c
>> @@ -0,0 +1,136 @@
>> +/*
>> + * MFD core driver for the Richtek RT5033.
>> + *
>> + * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
>> + * Author: Beomho Seo <beomho.seo@...sung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published bythe Free Software Foundation.
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/module.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/of_device.h>
>> +#include <linux/mfd/core.h>
>> +#include <linux/mfd/rt5033.h>
>> +#include <linux/mfd/rt5033-private.h>
>> +
>> +static const struct regmap_irq rt5033_irqs[] = {
>> + { .mask = RT5033_PMIC_IRQ_BUCKOCP, },
>> + { .mask = RT5033_PMIC_IRQ_BUCKLV, },
>> + { .mask = RT5033_PMIC_IRQ_SAFELDOLV, },
>> + { .mask = RT5033_PMIC_IRQ_LDOLV, },
>> + { .mask = RT5033_PMIC_IRQ_OT, },
>> + { .mask = RT5033_PMIC_IRQ_VDDA_UV, },
>> +};
>> +
>> +static const struct regmap_irq_chip rt5033_irq_chip = {
>> + .name = "rt5033",
>> + .status_base = RT5033_REG_PMIC_IRQ_STAT,
>> + .mask_base = RT5033_REG_PMIC_IRQ_CTRL,
>> + .mask_invert = true,
>> + .num_regs = 1,
>> + .irqs = rt5033_irqs,
>> + .num_irqs = ARRAY_SIZE(rt5033_irqs),
>> +};
>> +
>> +static const struct mfd_cell rt5033_devs[] = {
>> + { .name = "rt5033-regulator", },
>> + { .name = "rt5033-charger", .of_compatible = "richtek,rt5033-charger",},
>> + { .name = "rt5033-battery", .of_compatible = "richtek,rt5033-battery",},
>> +};
>
> Perhaps I wasn't clear enough in my previous review -- sorry for
> that. I only want to see the single entry on one line i.e. one with
> .name, but no .of_compatible. I probably wouldn't have requested a
> re-spin, but you have white space issues at the end of those two lines
> too.
>
I will follow your previous review. I will only change the single entry
on one line. You said that you wouldn't have requested a re-spin.
But If fix white space issues at the end of those two lines, those
over 80 characters. So I will defer to your previous review.
I will fix it and send v6 patch soon.
Thanks,
Beomho Seo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists