[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <546DDB25.4050408@linaro.org>
Date: Thu, 20 Nov 2014 12:14:29 +0000
From: Daniel Thompson <daniel.thompson@...aro.org>
To: Will Deacon <will.deacon@....com>
CC: Russell King <linux@....linux.org.uk>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Peter Zijlstra <a.p.zijlstra@...llo.nl>,
Paul Mackerras <paulus@...ba.org>,
Ingo Molnar <mingo@...hat.com>,
Arnaldo Carvalho de Melo <acme@...nel.org>,
"patches@...aro.org" <patches@...aro.org>,
"linaro-kernel@...ts.linaro.org" <linaro-kernel@...ts.linaro.org>,
John Stultz <john.stultz@...aro.org>,
Sumit Semwal <sumit.semwal@...aro.org>
Subject: Re: [PATCH] arm: perf: Prevent wraparound during overflow
On 19/11/14 18:11, Will Deacon wrote:
> On Wed, Nov 19, 2014 at 03:52:26PM +0000, Daniel Thompson wrote:
>> If the overflow threshold for a counter is set above or near the
>> 0xffffffff boundary then the kernel may lose track of the overflow
>> causing only events that occur *after* the overflow to be recorded.
>> Specifically the problem occurs when the value of the performance counter
>> overtakes its original programmed value due to wrap around.
>>
>> Typical solutions to this problem are either to avoid programming in
>> values likely to be overtaken or to treat the overflow bit as the 33rd
>> bit of the counter.
>>
>> Its somewhat fiddly to refactor the code to correctly handle the 33rd bit
>> during irqsave sections (context switches for example) so instead we take
>> the simpler approach of avoiding values likely to be overtaken.
>>
>> We set the limit to half of max_period because this matches the limit
>> imposed in __hw_perf_event_init(). This causes a doubling of the interrupt
>> rate for large threshold values, however even with a very fast counter
>> ticking at 4GHz the interrupt rate would only be ~1Hz.
>>
>> Signed-off-by: Daniel Thompson <daniel.thompson@...aro.org>
>> ---
>>
>> Notes:
>> There is similar code in the arm64 tree which retains the assumptions of
>> the original arm code regarding 32-bit wide performance counters. If
>> this patch doesn't get beaten up during review I'll also share a similar
>> patch for arm64.
>>
>>
>> arch/arm/kernel/perf_event.c | 10 ++++++++--
>> 1 file changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
>> index 266cba46db3e..b50a770f8c99 100644
>> --- a/arch/arm/kernel/perf_event.c
>> +++ b/arch/arm/kernel/perf_event.c
>> @@ -115,8 +115,14 @@ int armpmu_event_set_period(struct perf_event *event)
>> ret = 1;
>> }
>>
>> - if (left > (s64)armpmu->max_period)
>> - left = armpmu->max_period;
>> + /*
>> + * Limit the maximum period to prevent the counter value
>> + * from overtaking the one we are about to program. In
>> + * effect we are reducing max_period to account for
>> + * interrupt latency (and we are being very conservative).
>> + */
>> + if (left > (s64)(armpmu->max_period >> 1))
>> + left = armpmu->max_period >> 1;
>
> The s64 cast looks off here, can we just drop it entirely?
Yes.
left will always be positive at this point in the code and therefore can
be safely promoted within this expression (and generated no extra
warnings for me).
I'll change this (although I might just keep the redundant braces
because > and >> are composed of the same characters making it hard to
read without the braces).
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists