| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <4728982.ETBlJctOKU@amdc1032>
Date: Thu, 20 Nov 2014 14:05:23 +0100
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Kukjin Kim <kgene.kim@...sung.com>, Kukjin Kim <kgene@...nel.org>
Cc: Chanwoo Choi <cw00.choi@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Tomasz Figa <tomasz.figa@...il.com>,
Pankaj Dubey <pankaj.dubey@...sung.com>,
Vikas Sajjan <vikas.sajjan@...sung.com>,
linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v5] ARM: EXYNOS: add Exynos3250 PMU support
This patch prepares the PMU code for the future:
- suspend/resume (S2R) support
- cpuidle AFTR/W-AFTR modes support
on Exynos3250.
Cc: Vikas Sajjan <vikas.sajjan@...sung.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@...sung.com>
Acked-by: Kyungmin Park <kyungmin.park@...sung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
---
v5:
- added Reviewed-by tag from Pankaj Dubey
- fixed form -> from typo
v4:
- rebased on top of next-20141114 branch of linux-next kernel tree
(it also applies fine to for-next branch of linux-samsung.git)
- removed writing to undocumented CORE2 and CORE3 related registers
- fixed values used for EXYNOS3_[G3D,LCD]_SYS_PWR_REG registers
- added defines for values used for EXYNOS3_*_DURATION registers
- removed redundat pr_info("EXYNOS3250 PMU Initialize\n")
v3:
- rebased on top of for-next branch of linux-samsung.git and
[PATCH v7] mfd: syscon: Decouple syscon interface from platform devices
(https://lkml.org/lkml/2014/9/30/156)
[PATCH v9 0/2] ARM: Exynos: Convert PMU implementation into a platform driver
(https://lkml.org/lkml/2014/10/6/89)
[PATCH v9 0/2] Adds PMU and S2R support for exynos5420
(http://www.spinics.net/lists/arm-kernel/msg368207.html)
v2:
- rebased on top of next-20140708 and
http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg32410.html
http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg33660.html
http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg33675.html
this patch also applies fine after/before Exynos5800 PMU support:
http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg33835.html
arch/arm/mach-exynos/pmu.c | 167 ++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-exynos/regs-pmu.h | 128 ++++++++++++++++++++++++++++++
2 files changed, 295 insertions(+)
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index 6c8a76d..673723f 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -31,6 +31,7 @@ struct exynos_pmu_data {
void (*pmu_init)(void);
void (*powerdown_conf)(enum sys_powerdown);
+ void (*powerdown_conf_extra)(enum sys_powerdown);
};
struct exynos_pmu_context {
@@ -51,6 +52,92 @@ static inline u32 pmu_raw_readl(u32 offset)
return readl_relaxed(pmu_base_addr + offset);
}
+static struct exynos_pmu_conf exynos3250_pmu_config[] = {
+ /* { .offset = offset, .val = { AFTR, W-AFTR, SLEEP } */
+ { EXYNOS3_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG,{ 0x0, 0x0, 0x0} },
+ { EXYNOS3_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG,{ 0x0, 0x0, 0x0} },
+ { EXYNOS3_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS3_ARM_L2_SYS_PWR_REG, { 0x0, 0x0, 0x3} },
+ { EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS3_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_TOP_PWR_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
+ { EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
+ { EXYNOS3_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG,{ 0x1, 0x1, 0x0} },
+ { EXYNOS3_CAM_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_LCD0_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_MAUDIO_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { PMU_TABLE_END,},
+};
+
static const struct exynos_pmu_conf exynos4210_pmu_config[] = {
/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
{ S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
@@ -495,6 +582,44 @@ static struct exynos_pmu_conf exynos5420_pmu_config[] = {
{ PMU_TABLE_END,},
};
+static unsigned int const exynos3250_list_feed[] = {
+ EXYNOS3_ARM_CORE_OPTION(0),
+ EXYNOS3_ARM_CORE_OPTION(1),
+ EXYNOS3_ARM_CORE_OPTION(2),
+ EXYNOS3_ARM_CORE_OPTION(3),
+ EXYNOS3_ARM_COMMON_OPTION,
+ EXYNOS3_TOP_PWR_OPTION,
+ EXYNOS3_CORE_TOP_PWR_OPTION,
+ S5P_CAM_OPTION,
+ S5P_MFC_OPTION,
+ S5P_G3D_OPTION,
+ S5P_LCD0_OPTION,
+ S5P_ISP_OPTION,
+};
+
+static void exynos3250_powerdown_conf_extra(enum sys_powerdown mode)
+{
+ unsigned int i;
+ unsigned int tmp;
+
+ /* Enable only SC_FEEDBACK */
+ for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) {
+ tmp = pmu_raw_readl(exynos3250_list_feed[i]);
+ tmp &= ~(EXYNOS3_OPTION_USE_SC_COUNTER);
+ tmp |= EXYNOS3_OPTION_USE_SC_FEEDBACK;
+ pmu_raw_writel(tmp, exynos3250_list_feed[i]);
+ }
+
+ if (mode != SYS_SLEEP)
+ return;
+
+ pmu_raw_writel(XUSBXTI_DURATION, EXYNOS3_XUSBXTI_DURATION);
+ pmu_raw_writel(XXTI_DURATION, EXYNOS3_XXTI_DURATION);
+ pmu_raw_writel(EXT_REGULATOR_DURATION, EXYNOS3_EXT_REGULATOR_DURATION);
+ pmu_raw_writel(EXT_REGULATOR_COREBLK_DURATION,
+ EXYNOS3_EXT_REGULATOR_COREBLK_DURATION);
+}
+
static unsigned int const exynos5_list_both_cnt_feed[] = {
EXYNOS5_ARM_CORE0_OPTION,
EXYNOS5_ARM_CORE1_OPTION,
@@ -632,6 +757,9 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode)
pmu_data->pmu_config[i].offset);
}
+ if (pmu_data->powerdown_conf_extra)
+ pmu_data->powerdown_conf_extra(mode);
+
if (pmu_data->pmu_config_extra) {
for (i = 0; pmu_data->pmu_config_extra[i].offset != PMU_TABLE_END; i++)
pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode],
@@ -639,6 +767,36 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode)
}
}
+static void exynos3250_pmu_init(void)
+{
+ unsigned int value;
+
+ /*
+ * To prevent from issuing new bus request form L2 memory system
+ * If core status is power down, should be set '1' to L2 power down
+ */
+ value = pmu_raw_readl(EXYNOS3_ARM_COMMON_OPTION);
+ value |= EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
+ pmu_raw_writel(value, EXYNOS3_ARM_COMMON_OPTION);
+
+ /* Enable USE_STANDBY_WFI for all CORE */
+ pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
+
+ /*
+ * Set PSHOLD port for output high
+ */
+ value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
+ value |= S5P_PS_HOLD_OUTPUT_HIGH;
+ pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
+
+ /*
+ * Enable signal for PSHOLD port
+ */
+ value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
+ value |= S5P_PS_HOLD_EN;
+ pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
+}
+
static void exynos5250_pmu_init(void)
{
unsigned int value;
@@ -717,6 +875,12 @@ static void exynos5420_pmu_init(void)
}
+static const struct exynos_pmu_data exynos3250_pmu_data = {
+ .pmu_config = exynos3250_pmu_config,
+ .pmu_init = exynos3250_pmu_init,
+ .powerdown_conf_extra = exynos3250_powerdown_conf_extra,
+};
+
static const struct exynos_pmu_data exynos4210_pmu_data = {
.pmu_config = exynos4210_pmu_config,
};
@@ -747,6 +911,9 @@ static struct exynos_pmu_data exynos5420_pmu_data = {
*/
static const struct of_device_id exynos_pmu_of_device_ids[] = {
{
+ .compatible = "samsung,exynos3250-pmu",
+ .data = &exynos3250_pmu_data,
+ }, {
.compatible = "samsung,exynos4210-pmu",
.data = &exynos4210_pmu_data,
}, {
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
index 46b973b..d5a66e9 100644
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ b/arch/arm/mach-exynos/regs-pmu.h
@@ -19,7 +19,20 @@
#define S5P_CENTRAL_SEQ_OPTION 0x0208
#define S5P_USE_STANDBY_WFI0 (1 << 16)
+#define S5P_USE_STANDBY_WFI1 (1 << 17)
+#define S5P_USE_STANDBY_WFI2 (1 << 19)
+#define S5P_USE_STANDBY_WFI3 (1 << 20)
#define S5P_USE_STANDBY_WFE0 (1 << 24)
+#define S5P_USE_STANDBY_WFE1 (1 << 25)
+#define S5P_USE_STANDBY_WFE2 (1 << 27)
+#define S5P_USE_STANDBY_WFE3 (1 << 28)
+
+#define S5P_USE_STANDBY_WFI_ALL \
+ (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFI1 | \
+ S5P_USE_STANDBY_WFI2 | S5P_USE_STANDBY_WFI3 | \
+ S5P_USE_STANDBY_WFE0 | S5P_USE_STANDBY_WFE1 | \
+ S5P_USE_STANDBY_WFE2 | S5P_USE_STANDBY_WFE3)
+
#define S5P_USE_DELAYED_RESET_ASSERTION BIT(12)
#define EXYNOS_CORE_PO_RESET(n) ((1 << 4) << n)
@@ -154,6 +167,17 @@
#define S5P_PAD_RET_EBIA_OPTION 0x3188
#define S5P_PAD_RET_EBIB_OPTION 0x31A8
+#define S5P_PS_HOLD_CONTROL 0x330C
+#define S5P_PS_HOLD_EN (1 << 31)
+#define S5P_PS_HOLD_OUTPUT_HIGH (3 << 8)
+
+#define S5P_CAM_OPTION 0x3C08
+#define S5P_MFC_OPTION 0x3C48
+#define S5P_G3D_OPTION 0x3C68
+#define S5P_LCD0_OPTION 0x3C88
+#define S5P_LCD1_OPTION 0x3CA8
+#define S5P_ISP_OPTION S5P_LCD1_OPTION
+
#define S5P_CORE_LOCAL_PWR_EN 0x3
#define S5P_CORE_WAKEUP_FROM_LOCAL_CFG (0x3 << 8)
@@ -214,6 +238,110 @@
#define S5P_DIS_IRQ_CORE3 0x1034
#define S5P_DIS_IRQ_CENTRAL3 0x1038
+/* Only for EXYNOS3XXX */
+#define EXYNOS3_ARM_CORE0_SYS_PWR_REG 0x1000
+#define EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG 0x1004
+#define EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG 0x1008
+#define EXYNOS3_ARM_CORE1_SYS_PWR_REG 0x1010
+#define EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG 0x1014
+#define EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG 0x1018
+#define EXYNOS3_ISP_ARM_SYS_PWR_REG 0x1050
+#define EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1054
+#define EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1058
+#define EXYNOS3_ARM_COMMON_SYS_PWR_REG 0x1080
+#define EXYNOS3_ARM_L2_SYS_PWR_REG 0x10C0
+#define EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG 0x1100
+#define EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG 0x1104
+#define EXYNOS3_CMU_RESET_SYS_PWR_REG 0x110C
+#define EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG 0x1110
+#define EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG 0x1114
+#define EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG 0x111C
+#define EXYNOS3_APLL_SYSCLK_SYS_PWR_REG 0x1120
+#define EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG 0x1124
+#define EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG 0x1128
+#define EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG 0x112C
+#define EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG 0x1130
+#define EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG 0x1134
+#define EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG 0x1138
+#define EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG 0x1140
+#define EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG 0x1148
+#define EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG 0x114C
+#define EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG 0x1150
+#define EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG 0x1154
+#define EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG 0x1158
+#define EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG 0x1160
+#define EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG 0x1168
+#define EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG 0x116C
+#define EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG 0x1170
+#define EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG 0x1174
+#define EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG 0x1178
+#define EXYNOS3_TOP_BUS_SYS_PWR_REG 0x1180
+#define EXYNOS3_TOP_RETENTION_SYS_PWR_REG 0x1184
+#define EXYNOS3_TOP_PWR_SYS_PWR_REG 0x1188
+#define EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG 0x1190
+#define EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG 0x1194
+#define EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG 0x1198
+#define EXYNOS3_LOGIC_RESET_SYS_PWR_REG 0x11A0
+#define EXYNOS3_OSCCLK_GATE_SYS_PWR_REG 0x11A4
+#define EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG 0x11B0
+#define EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG 0x11B4
+#define EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200
+#define EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG 0x1204
+#define EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG 0x1208
+#define EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG 0x1218
+#define EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220
+#define EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG 0x1224
+#define EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG 0x1228
+#define EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG 0x122C
+#define EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1230
+#define EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG 0x1234
+#define EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG 0x1238
+#define EXYNOS3_PAD_ISOLATION_SYS_PWR_REG 0x1240
+#define EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG 0x1260
+#define EXYNOS3_XUSBXTI_SYS_PWR_REG 0x1280
+#define EXYNOS3_XXTI_SYS_PWR_REG 0x1284
+#define EXYNOS3_EXT_REGULATOR_SYS_PWR_REG 0x12C0
+#define EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG 0x12C4
+#define EXYNOS3_GPIO_MODE_SYS_PWR_REG 0x1300
+#define EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG 0x1340
+#define EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG 0x1344
+#define EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG 0x1348
+#define EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG 0x1350
+#define EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG 0x1354
+#define EXYNOS3_CAM_SYS_PWR_REG 0x1380
+#define EXYNOS3_MFC_SYS_PWR_REG 0x1388
+#define EXYNOS3_G3D_SYS_PWR_REG 0x138C
+#define EXYNOS3_LCD0_SYS_PWR_REG 0x1390
+#define EXYNOS3_ISP_SYS_PWR_REG 0x1394
+#define EXYNOS3_MAUDIO_SYS_PWR_REG 0x1398
+#define EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG 0x13B0
+#define EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG 0x13B4
+#define EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG 0x13B8
+#define EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG 0x13C0
+#define EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG 0x13C4
+#define EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG 0x13C8
+
+#define EXYNOS3_ARM_CORE0_OPTION 0x2008
+#define EXYNOS3_ARM_CORE_OPTION(_nr) \
+ (EXYNOS3_ARM_CORE0_OPTION + ((_nr) * 0x80))
+
+#define EXYNOS3_ARM_COMMON_OPTION 0x2408
+#define EXYNOS3_TOP_PWR_OPTION 0x2C48
+#define EXYNOS3_CORE_TOP_PWR_OPTION 0x2CA8
+#define EXYNOS3_XUSBXTI_DURATION 0x341C
+#define EXYNOS3_XXTI_DURATION 0x343C
+#define EXYNOS3_EXT_REGULATOR_DURATION 0x361C
+#define EXYNOS3_EXT_REGULATOR_COREBLK_DURATION 0x363C
+#define XUSBXTI_DURATION 0x00000BB8
+#define XXTI_DURATION XUSBXTI_DURATION
+#define EXT_REGULATOR_DURATION 0x00001D4C
+#define EXT_REGULATOR_COREBLK_DURATION EXT_REGULATOR_DURATION
+
+/* for XXX_OPTION */
+#define EXYNOS3_OPTION_USE_SC_COUNTER (1 << 0)
+#define EXYNOS3_OPTION_USE_SC_FEEDBACK (1 << 1)
+#define EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN (1 << 7)
+
/* For EXYNOS5 */
#define EXYNOS5_AUTO_WDTRESET_DISABLE 0x0408
--
1.8.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists