Message-Id: <1416553911-22990-2-git-send-email-aaron.lu@intel.com>
Date:	Fri, 21 Nov 2014 15:11:49 +0800
From:	Aaron Lu <aaron.lu@...el.com>
To:	"Rafael J. Wysocki" <rjw@...ysocki.net>
Cc:	Lee Jones <lee.jones@...aro.org>,
	Jacob Pan <jacob.jun.pan@...ux.intel.com>,
	Yegnesh Iyer <yegnesh.s.iyer@...el.com>,
	linux-acpi@...r.kernel.org, linux-iio@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v3 1/3] ACPI / PMIC: support PMIC operation region for CrystalCove

The Baytrail-T platform firmware has defined two customized operation
regions for PMIC chip Crystal Cove - one is for power resource handling
and one is for thermal: sensor temperature reporting, trip point setting,
etc. This patch adds support for them on top of the existing Crystal Cove
PMIC driver.

The reason to split code into a separate file intel_pmic.c is that there
are more PMIC drivers with ACPI operation region support coming and we can
re-use those code. The intel_pmic_opregion_data structure is created also
for this purpose: when we need to support a new PMIC's operation region,
we just need to fill those callbacks and the two register mapping tables.

Signed-off-by: Aaron Lu <aaron.lu@...el.com>
Acked-by: Lee Jones <lee.jones@...aro.org> for the MFD part
---
 drivers/acpi/Kconfig               |  17 ++
 drivers/acpi/Makefile              |   3 +
 drivers/acpi/pmic/intel_pmic.c     | 339 +++++++++++++++++++++++++++++++++++++
 drivers/acpi/pmic/intel_pmic.h     |  34 ++++
 drivers/acpi/pmic/intel_pmic_crc.c | 216 +++++++++++++++++++++++
 drivers/mfd/intel_soc_pmic_crc.c   |   3 +
 6 files changed, 612 insertions(+)
 create mode 100644 drivers/acpi/pmic/intel_pmic.c
 create mode 100644 drivers/acpi/pmic/intel_pmic.h
 create mode 100644 drivers/acpi/pmic/intel_pmic_crc.c

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 79078b8f5697..3e5f2056f946 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -393,4 +393,21 @@ config ACPI_EXTLOG
 	  driver adds support for that functionality with corresponding
 	  tracepoint which carries that information to userspace.
 
+menuconfig PMIC_OPREGION
+	bool "PMIC (Power Management Integrated Circuit) operation region support"
+	help
+	  Select this option to enable support for ACPI operation
+	  region of the PMIC chip. The operation region can be used
+	  to control power rails and sensor reading/writing on the
+	  PMIC chip.
+
+if PMIC_OPREGION
+config CRC_PMIC_OPREGION
+	bool "ACPI operation region support for CrystalCove PMIC"
+	depends on INTEL_SOC_PMIC
+	help
+	  This config adds ACPI operation region support for CrystalCove PMIC.
+
+endif
+
 endif	# ACPI
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 6d11522f0e48..f5938399ac14 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -88,3 +88,6 @@ obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o
 obj-$(CONFIG_ACPI_APEI)		+= apei/
 
 obj-$(CONFIG_ACPI_EXTLOG)	+= acpi_extlog.o
+
+obj-$(CONFIG_PMIC_OPREGION)	+= pmic/intel_pmic.o
+obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
diff --git a/drivers/acpi/pmic/intel_pmic.c b/drivers/acpi/pmic/intel_pmic.c
new file mode 100644
index 000000000000..5dbc0fb4d536
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic.c
@@ -0,0 +1,339 @@
+/*
+ * intel_pmic.c - Intel PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+#include "intel_pmic.h"
+
+#define PMIC_PMOP_OPREGION_ID		0x8d
+#define PMIC_THERMAL_OPREGION_ID	0x8c
+
+struct acpi_lpat {
+	int temp;
+	int raw;
+};
+
+struct intel_pmic_opregion {
+	struct mutex lock;
+	struct acpi_lpat *lpat;
+	int lpat_count;
+	struct regmap *regmap;
+	struct intel_pmic_opregion_data *data;
+};
+
+static struct pmic_pwr_reg *
+pmic_get_pwr_reg(int address, struct pmic_pwr_table *table, int count)
+{
+	int i;
+
+	for (i = 0; i < count; i++) {
+		if (table[i].address == address)
+			return &table[i].pwr_reg;
+	}
+	return NULL;
+}
+
+static int
+pmic_get_thermal_reg(int address, struct pmic_thermal_table *table, int count)
+{
+	int i;
+
+	for (i = 0; i < count; i++) {
+		if (table[i].address == address)
+			return table[i].reg;
+	}
+	return -ENOENT;
+}
+
+/* Return temperature from raw value through LPAT table */
+static int raw_to_temp(struct acpi_lpat *lpat, int count, int raw)
+{
+	int i, delta_temp, delta_raw, temp;
+
+	for (i = 0; i < count - 1; i++) {
+		if ((raw >= lpat[i].raw && raw <= lpat[i+1].raw) ||
+		    (raw <= lpat[i].raw && raw >= lpat[i+1].raw))
+			break;
+	}
+
+	if (i == count - 1)
+		return -ENOENT;
+
+	delta_temp = lpat[i+1].temp - lpat[i].temp;
+	delta_raw = lpat[i+1].raw - lpat[i].raw;
+	temp = lpat[i].temp + (raw - lpat[i].raw) * delta_temp / delta_raw;
+
+	return temp;
+}
+
+/* Return raw value from temperature through LPAT table */
+static int temp_to_raw(struct acpi_lpat *lpat, int count, int temp)
+{
+	int i, delta_temp, delta_raw, raw;
+
+	for (i = 0; i < count - 1; i++) {
+		if (temp >= lpat[i].temp && temp <= lpat[i+1].temp)
+			break;
+	}
+
+	if (i == count - 1)
+		return -ENOENT;
+
+	delta_temp = lpat[i+1].temp - lpat[i].temp;
+	delta_raw = lpat[i+1].raw - lpat[i].raw;
+	raw = lpat[i].raw + (temp - lpat[i].temp) * delta_raw / delta_temp;
+
+	return raw;
+}
+
+static void
+pmic_thermal_lpat(struct intel_pmic_opregion *opregion, acpi_handle handle,
+		  struct device *dev)
+{
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj_p, *obj_e;
+	int *lpat, i;
+	acpi_status status;
+
+	status = acpi_evaluate_object(handle, "LPAT", NULL, &buffer);
+	if (ACPI_FAILURE(status))
+		return;
+
+	obj_p = (union acpi_object *)buffer.pointer;
+	if (!obj_p || (obj_p->type != ACPI_TYPE_PACKAGE) ||
+	    (obj_p->package.count % 2) || (obj_p->package.count < 4))
+		goto out;
+
+	lpat = devm_kmalloc(dev, sizeof(*lpat) * obj_p->package.count,
+			    GFP_KERNEL);
+	if (!lpat)
+		goto out;
+
+	for (i = 0; i < obj_p->package.count; i++) {
+		obj_e = &obj_p->package.elements[i];
+		if (obj_e->type != ACPI_TYPE_INTEGER)
+			goto out;
+		lpat[i] = obj_e->integer.value;
+	}
+
+	opregion->lpat = (struct acpi_lpat *)lpat;
+	opregion->lpat_count = obj_p->package.count / 2;
+
+out:
+	kfree(buffer.pointer);
+}
+
+static acpi_status
+intel_pmic_pmop_handler(u32 function, acpi_physical_address address,
+			u32 bits, u64 *value64, void *handler_context,
+			void *region_context)
+{
+	struct intel_pmic_opregion *opregion = region_context;
+	struct regmap *regmap = opregion->regmap;
+	struct intel_pmic_opregion_data *d = opregion->data;
+	struct pmic_pwr_reg *preg;
+	int result;
+
+	if (bits != 32 || !value64)
+		return AE_BAD_PARAMETER;
+
+	if (function == ACPI_WRITE && !(*value64 == 0 || *value64 == 1))
+		return AE_BAD_PARAMETER;
+
+	preg = pmic_get_pwr_reg(address, d->pwr_table, d->pwr_table_count);
+	if (!preg)
+		return AE_BAD_PARAMETER;
+
+	mutex_lock(&opregion->lock);
+
+	if (function == ACPI_READ)
+		result = d->get_power(regmap, preg, value64);
+	else
+		result = d->update_power(regmap, preg, *value64 == 1);
+
+	mutex_unlock(&opregion->lock);
+
+	return result ? AE_ERROR : AE_OK;
+}
+
+static acpi_status pmic_read_temp(struct intel_pmic_opregion *opregion,
+				  int reg, u64 *value)
+{
+	int raw_temp, temp;
+
+	if (!opregion->data->get_raw_temp)
+		return AE_BAD_PARAMETER;
+
+	raw_temp = opregion->data->get_raw_temp(opregion->regmap, reg);
+	if (raw_temp < 0)
+		return AE_ERROR;
+
+	if (!opregion->lpat) {
+		*value = raw_temp;
+		return AE_OK;
+	}
+
+	temp = raw_to_temp(opregion->lpat, opregion->lpat_count, raw_temp);
+	if (temp < 0)
+		return AE_ERROR;
+
+	*value = temp;
+	return AE_OK;
+}
+
+static acpi_status pmic_thermal_temp(struct intel_pmic_opregion *opregion,
+				     int reg, u32 function, u64 *value)
+{
+	if (function != ACPI_READ)
+		return AE_BAD_PARAMETER;
+
+	return pmic_read_temp(opregion, reg, value);
+}
+
+static acpi_status pmic_thermal_aux(struct intel_pmic_opregion *opregion,
+				    int reg, u32 function, u64 *value)
+{
+	int raw_temp;
+
+	if (function == ACPI_READ)
+		return pmic_read_temp(opregion, reg, value);
+
+	if (!opregion->data->update_aux)
+		return AE_BAD_PARAMETER;
+
+	if (opregion->lpat) {
+		raw_temp = temp_to_raw(opregion->lpat, opregion->lpat_count,
+					 *value);
+		if (raw_temp < 0)
+			return AE_ERROR;
+	} else {
+		raw_temp = *value;
+	}
+
+	return opregion->data->update_aux(opregion->regmap, reg, raw_temp) ?
+		AE_ERROR : AE_OK;
+}
+
+static acpi_status pmic_thermal_pen(struct intel_pmic_opregion *opregion,
+				    int reg, u32 function, u64 *value)
+{
+	struct intel_pmic_opregion_data *d = opregion->data;
+	struct regmap *regmap = opregion->regmap;
+
+	if (!d->get_policy || !d->update_policy)
+		return AE_BAD_PARAMETER;
+
+	if (function == ACPI_READ)
+		return d->get_policy(regmap, reg, value) ? AE_ERROR : AE_OK;
+
+	if (*value != 0 || *value != 1)
+		return AE_BAD_PARAMETER;
+
+	return d->update_policy(regmap, reg, *value) ? AE_ERROR : AE_OK;
+}
+
+static bool pmic_thermal_is_temp(int address)
+{
+	return (address <= 0x3c) && !(address % 12);
+}
+
+static bool pmic_thermal_is_aux(int address)
+{
+	return (address >= 4 && address <= 0x40 && !((address - 4) % 12)) ||
+	       (address >= 8 && address <= 0x44 && !((address - 8) % 12));
+}
+
+static bool pmic_thermal_is_pen(int address)
+{
+	return address >= 0x48 && address <= 0x5c;
+}
+
+static acpi_status
+intel_pmic_thermal_handler(u32 function, acpi_physical_address address,
+			   u32 bits, u64 *value64, void *handler_context,
+			   void *region_context)
+{
+	struct intel_pmic_opregion *opregion = region_context;
+	int reg;
+	int result;
+
+	if (bits != 32 || !value64)
+		return AE_BAD_PARAMETER;
+
+	reg = pmic_get_thermal_reg(address, opregion->data->thermal_table,
+				   opregion->data->thermal_table_count);
+	if (!reg)
+		return AE_BAD_PARAMETER;
+
+	mutex_lock(&opregion->lock);
+
+	result = AE_BAD_PARAMETER;
+	if (pmic_thermal_is_temp(address))
+		result = pmic_thermal_temp(opregion, reg, function, value64);
+	else if (pmic_thermal_is_aux(address))
+		result = pmic_thermal_aux(opregion, reg, function, value64);
+	else if (pmic_thermal_is_pen(address))
+		result = pmic_thermal_pen(opregion, reg, function, value64);
+
+	mutex_unlock(&opregion->lock);
+
+	return result;
+}
+
+int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle,
+					struct regmap *regmap,
+					struct intel_pmic_opregion_data *d)
+{
+	acpi_status status;
+	struct intel_pmic_opregion *opregion;
+
+	if (!dev || !regmap || !d)
+		return -EINVAL;
+
+	if (!handle)
+		return -ENODEV;
+
+	opregion = devm_kzalloc(dev, sizeof(*opregion), GFP_KERNEL);
+	if (!opregion)
+		return -ENOMEM;
+
+	mutex_init(&opregion->lock);
+	opregion->regmap = regmap;
+	pmic_thermal_lpat(opregion, handle, dev);
+
+	status = acpi_install_address_space_handler(handle,
+						    PMIC_PMOP_OPREGION_ID,
+						    intel_pmic_pmop_handler,
+						    NULL, opregion);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	status = acpi_install_address_space_handler(handle,
+						    PMIC_THERMAL_OPREGION_ID,
+						    intel_pmic_thermal_handler,
+						    NULL, opregion);
+	if (ACPI_FAILURE(status)) {
+		acpi_remove_address_space_handler(handle, PMIC_PMOP_OPREGION_ID,
+						  intel_pmic_pmop_handler);
+		return -ENODEV;
+	}
+
+	opregion->data = d;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(intel_pmic_install_opregion_handler);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/pmic/intel_pmic.h b/drivers/acpi/pmic/intel_pmic.h
new file mode 100644
index 000000000000..18b9bb80f8b6
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic.h
@@ -0,0 +1,34 @@
+#ifndef __INTEL_PMIC_H
+#define __INTEL_PMIC_H
+
+struct pmic_pwr_reg {
+	int reg;	/* corresponding PMIC register */
+	int bit;	/* control bit for power */
+};
+
+struct pmic_pwr_table {
+	int address;	/* operation region address */
+	struct pmic_pwr_reg pwr_reg;
+};
+
+struct pmic_thermal_table {
+	int address;	/* operation region address */
+	int reg;	/* corresponding thermal register */
+};
+
+struct intel_pmic_opregion_data {
+	int (*get_power)(struct regmap *r, struct pmic_pwr_reg *preg, u64 *value);
+	int (*update_power)(struct regmap *r, struct pmic_pwr_reg *preg, bool on);
+	int (*get_raw_temp)(struct regmap *r, int reg);
+	int (*update_aux)(struct regmap *r, int reg, int raw_temp);
+	int (*get_policy)(struct regmap *r, int reg, u64 *value);
+	int (*update_policy)(struct regmap *r, int reg, int enable);
+	struct pmic_pwr_table *pwr_table;
+	int pwr_table_count;
+	struct pmic_thermal_table *thermal_table;
+	int thermal_table_count;
+};
+
+int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle, struct regmap *regmap, struct intel_pmic_opregion_data *d);
+
+#endif
diff --git a/drivers/acpi/pmic/intel_pmic_crc.c b/drivers/acpi/pmic/intel_pmic_crc.c
new file mode 100644
index 000000000000..7629f16d1526
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic_crc.c
@@ -0,0 +1,216 @@
+/*
+ * intel_pmic_crc.c - Intel CrystalCove PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include "intel_pmic.h"
+
+#define PWR_SOURCE_SELECT	BIT(1)
+
+#define PMIC_A0LOCK_REG		0xc5
+
+static struct pmic_pwr_table pwr_table[] = {
+	{
+		.address = 0x24,
+		.pwr_reg = {
+			.reg = 0x66,
+			.bit = 0x00,
+		},
+	},	/* X285 -> V2P85SX, camara */
+	{
+		.address = 0x48,
+		.pwr_reg = {
+			.reg = 0x5d,
+			.bit = 0x00,
+		},
+	},	/* V18X -> V1P8SX, eMMC/camara/audio */
+};
+
+static struct pmic_thermal_table thermal_table[] = {
+	{
+		.address = 0x00,
+		.reg = 0x75
+	},	/* TMP0 -> SYS0_THRM_RSLT_L */
+	{
+		.address = 0x04,
+		.reg = 0x95
+	},	/* AX00 -> SYS0_THRMALRT0_L */
+	{
+		.address = 0x08,
+		.reg = 0x97
+	},	/* AX01 -> SYS0_THRMALRT1_L */
+	{
+		.address = 0x0c,
+		.reg = 0x77
+	},	/* TMP1 -> SYS1_THRM_RSLT_L */
+	{
+		.address = 0x10,
+		.reg = 0x9a
+	},	/* AX10 -> SYS1_THRMALRT0_L */
+	{
+		.address = 0x14,
+		.reg = 0x9c
+	},	/* AX11 -> SYS1_THRMALRT1_L */
+	{
+		.address = 0x18,
+		.reg = 0x79
+	},	/* TMP2 -> SYS2_THRM_RSLT_L */
+	{
+		.address = 0x1c,
+		.reg = 0x9f
+	},	/* AX20 -> SYS2_THRMALRT0_L */
+	{
+		.address = 0x20,
+		.reg = 0xa1
+	},	/* AX21 -> SYS2_THRMALRT1_L */
+	{
+		.address = 0x48,
+		.reg = 0x94
+	},	/* PEN0 -> SYS0_THRMALRT0_H */
+	{
+		.address = 0x4c,
+		.reg = 0x99
+	},	/* PEN1 -> SYS1_THRMALRT1_H */
+	{
+		.address = 0x50,
+		.reg = 0x9e
+	},	/* PEN2 -> SYS2_THRMALRT2_H */
+};
+
+static int intel_crc_pmic_get_power(struct regmap *regmap,
+				    struct pmic_pwr_reg *preg, u64 *value)
+{
+	int data;
+
+	if (regmap_read(regmap, preg->reg, &data))
+		return -EIO;
+
+	*value = (data & PWR_SOURCE_SELECT) && (data & BIT(preg->bit)) ? 1 : 0;
+	return 0;
+}
+
+static int intel_crc_pmic_update_power(struct regmap *regmap,
+				       struct pmic_pwr_reg *preg, bool on)
+{
+	int data;
+
+	if (regmap_read(regmap, preg->reg, &data))
+		return -EIO;
+
+	if (on) {
+		data |= PWR_SOURCE_SELECT | BIT(preg->bit);
+	} else {
+		data &= ~BIT(preg->bit);
+		data |= PWR_SOURCE_SELECT;
+	}
+
+	if (regmap_write(regmap, preg->reg, data))
+		return -EIO;
+	return 0;
+}
+
+/* Raw temperature value is 10bits: 8bits in reg and 2bits in reg-1 bit0,1 */
+static int intel_crc_pmic_get_raw_temp(struct regmap *regmap, int reg)
+{
+	int temp_l, temp_h;
+
+	if (regmap_read(regmap, reg, &temp_l) ||
+	    regmap_read(regmap, reg - 1, &temp_h))
+		return -EIO;
+
+	return (temp_l | ((temp_h & 0x3) << 8));
+}
+
+static int
+intel_crc_pmic_update_aux(struct regmap *regmap, int reg, int raw)
+{
+	if (regmap_write(regmap, reg, raw) ||
+	    regmap_update_bits(regmap, reg - 1, 0x3, raw >> 8))
+		return -EIO;
+
+	return 0;
+}
+
+static int
+intel_crc_pmic_get_policy(struct regmap *regmap, int reg, u64 *value)
+{
+	int pen;
+
+	if (regmap_read(regmap, reg, &pen))
+		return -EIO;
+	*value = pen >> 7;
+	return 0;
+}
+
+static int intel_crc_pmic_update_policy(struct regmap *regmap,
+					int reg, int enable)
+{
+	int alert0;
+
+	/* Update to policy enable bit requires unlocking a0lock */
+	if (regmap_read(regmap, PMIC_A0LOCK_REG, &alert0))
+		return -EIO;
+	if (regmap_update_bits(regmap, PMIC_A0LOCK_REG, 0x01, 0))
+		return -EIO;
+
+	if (regmap_update_bits(regmap, reg, 0x80, enable << 7))
+		return -EIO;
+
+	/* restore alert0 */
+	if (regmap_write(regmap, PMIC_A0LOCK_REG, alert0))
+		return -EIO;
+
+	return 0;
+}
+
+static struct intel_pmic_opregion_data intel_crc_pmic_opregion_data = {
+	.get_power	= intel_crc_pmic_get_power,
+	.update_power	= intel_crc_pmic_update_power,
+	.get_raw_temp	= intel_crc_pmic_get_raw_temp,
+	.update_aux	= intel_crc_pmic_update_aux,
+	.get_policy	= intel_crc_pmic_get_policy,
+	.update_policy	= intel_crc_pmic_update_policy,
+	.pwr_table	= pwr_table,
+	.pwr_table_count= ARRAY_SIZE(pwr_table),
+	.thermal_table	= thermal_table,
+	.thermal_table_count = ARRAY_SIZE(thermal_table),
+};
+
+static int intel_crc_pmic_opregion_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+	return intel_pmic_install_opregion_handler(&pdev->dev,
+			ACPI_HANDLE(pdev->dev.parent), pmic->regmap,
+			&intel_crc_pmic_opregion_data);
+}
+
+static struct platform_driver intel_crc_pmic_opregion_driver = {
+	.probe = intel_crc_pmic_opregion_probe,
+	.driver = {
+		.name = "crystal_cove_region",
+	},
+};
+
+static int __init intel_crc_pmic_opregion_driver_init(void)
+{
+	return platform_driver_register(&intel_crc_pmic_opregion_driver);
+}
+module_init(intel_crc_pmic_opregion_driver_init);
+
+MODULE_DESCRIPTION("CrystalCove ACPI opration region driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/intel_soc_pmic_crc.c b/drivers/mfd/intel_soc_pmic_crc.c
index 7107cab832e6..48845d636bba 100644
--- a/drivers/mfd/intel_soc_pmic_crc.c
+++ b/drivers/mfd/intel_soc_pmic_crc.c
@@ -106,6 +106,9 @@ static struct mfd_cell crystal_cove_dev[] = {
 		.num_resources = ARRAY_SIZE(gpio_resources),
 		.resources = gpio_resources,
 	},
+	{
+		.name = "crystal_cove_region",
+	},
 };
 
 static struct regmap_config crystal_cove_regmap_config = {
-- 
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists