early console in setup code [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.18.0-rc5-00044-g9b84294 (kbuild@lkp-ib03) (gcc version 4.9.1 (Debian 4.9.1-19) ) #6 PREEMPT Sat Nov 22 18:04:31 CST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x1000000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x02dfffff] [ 0.000000] Base memory trampoline at [4009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x12400000-0x125fffff] [ 0.000000] [mem 0x12400000-0x125fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x10000000-0x123fffff] [ 0.000000] [mem 0x10000000-0x123fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x12600000-0x13ffdfff] [ 0.000000] [mem 0x12600000-0x13dfffff] page 2M [ 0.000000] [mem 0x13e00000-0x13ffdfff] page 4k [ 0.000000] BRK [0x0213b000, 0x0213bfff] PGTABLE [ 0.000000] BRK [0x0213c000, 0x0213cfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x127ab000-0x13feffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000FD950 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x13FFE450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x13FFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x13FFE490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0x13FFFF40 000040 [ 0.000000] ACPI: SSDT 0x13FFF7A0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x13FFF680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x13FFF640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 319MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 13ffe000 [ 0.000000] low ram: 0 - 13ffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13ffd001, primary cpu clock [ 0.000000] BRK [0x0213d000, 0x0213dfff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x13ffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 608 pages used for memmap [ 0.000000] Normal zone: 77822 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1972680 [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81180 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-ib0-11221632/glikely:devicetree:next-overlay:9b84294398291359d6c8f4ac4f36c7c666c6948a:bisect-linux-4/.vmlinuz-9b84294398291359d6c8f4ac4f36c7c666c6948a-20141122180436-1-kbuild branch=glikely/devicetree/next-overlay BOOT_IMAGE=/kernel/i386-randconfig-ib0-11221632/9b84294398291359d6c8f4ac4f36c7c666c6948a/vmlinuz-3.18.0-rc5-00044-g9b84294 drbd.minor_count=8 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 280128K/327280K available (6235K kernel code, 1153K rwdata, 3360K rodata, 552K init, 6240K bss, 47152K reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB) [ 0.000000] pkmap : 0xff800000 - 0xffa00000 (2048 kB) [ 0.000000] vmalloc : 0x547fe000 - 0xff7fe000 (2736 MB) [ 0.000000] lowmem : 0x40000000 - 0x53ffe000 ( 319 MB) [ 0.000000] .init : 0x41a82000 - 0x41b0c000 ( 552 kB) [ 0.000000] .data : 0x416170c0 - 0x41a804c0 (4517 kB) [ 0.000000] .text : 0x41000000 - 0x416170c0 (6236 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 0 [ 0.000000] CPU 0 irqstacks, hard=51c08000 soft=51c0a000 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] memory used by lock dependency info: 4895 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] ------------------------ [ 0.000000] | Locking API testsuite: [ 0.000000] ---------------------------------------------------------------------------- [ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] A-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.000000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] recursive read-lock: | ok | |failed| [ 0.000000] recursive read-lock #2: | ok | |failed| [ 0.000000] mixed read-write-lock: |failed| |failed| [ 0.000000] mixed write-read-lock: |failed| |failed| [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] hard-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.000000] soft-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.000000] hard-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.000000] soft-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.000000] sirq-safe-A => hirqs-on/12:failed|failed| ok | [ 0.000000] sirq-safe-A => hirqs-on/21:failed|failed| ok | [ 0.000000] hard-safe-A + irqs-on/12:failed|failed| ok | [ 0.000000] soft-safe-A + irqs-on/12:failed|failed| ok | [ 0.000000] hard-safe-A + irqs-on/21:failed|failed| ok | [ 0.000000] soft-safe-A + irqs-on/21:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/123:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/123:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/132:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/132:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/213:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/213:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/231:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/231:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/312:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/312:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/321:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/321:failed|failed| ok | [ 0.000000] hard-irq read-recursion/123: ok | [ 0.000000] soft-irq read-recursion/123: ok | [ 0.000000] hard-irq read-recursion/132: ok | [ 0.000000] soft-irq read-recursion/132: ok | [ 0.000000] hard-irq read-recursion/213: ok | [ 0.000000] soft-irq read-recursion/213: ok | [ 0.000000] hard-irq read-recursion/231: ok | [ 0.000000] soft-irq read-recursion/231: ok | [ 0.000000] hard-irq read-recursion/312: ok | [ 0.000000] soft-irq read-recursion/312: ok | [ 0.000000] hard-irq read-recursion/321: ok | [ 0.000000] soft-irq read-recursion/321: ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] | Wound/wait tests | [ 0.000000] --------------------- [ 0.000000] ww api failures: ok | ok | ok | [ 0.000000] ww contexts mixing:failed| ok | [ 0.000000] finishing ww context: ok | ok | ok | ok | [ 0.000000] locking mismatches: ok | ok | ok | [ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | [ 0.000000] spinlock nest unlocked: ok | [ 0.000000] ----------------------------------------------------- [ 0.000000] |block | try |context| [ 0.000000] ----------------------------------------------------- [ 0.000000] context:failed| ok | ok | [ 0.000000] try:failed| ok |failed| [ 0.000000] block:failed| ok |failed| [ 0.000000] spinlock:failed| ok |failed| [ 0.000000] -------------------------------------------------------- [ 0.000000] 141 out of 253 testcases failed, as expected. | [ 0.000000] ---------------------------------------------------- [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2693.528 MHz processor [ 0.020000] Calibrating delay loop (skipped) preset value.. 5387.05 BogoMIPS (lpj=26935280) [ 0.020000] pid_max: default: 32768 minimum: 301 [ 0.020000] ACPI: Core revision 20140926 [ 0.026238] ACPI: All ACPI Tables successfully acquired [ 0.030239] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.031070] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.034636] Initializing cgroup subsys devices [ 0.040012] Initializing cgroup subsys freezer [ 0.040700] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.040700] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.043215] CPU: Intel Core Processor (Haswell) (fam: 06, model: 3c, stepping: 01) [ 0.056668] ftrace: allocating 28008 entries in 55 pages [ 0.080421] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.082475] [ 0.082475] ********************************************************** [ 0.083521] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.084326] ** ** [ 0.085126] ** trace_printk() being used. Allocating extra memory. ** [ 0.085973] ** ** [ 0.086783] ** This means that this is a DEBUG kernel and it is ** [ 0.087588] ** unsafe for produciton use. ** [ 0.088395] ** ** [ 0.090022] ** If you see this message and you are not debugging ** [ 0.090835] ** the kernel, report this immediately to your vendor! ** [ 0.091631] ** ** [ 0.092439] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.093306] ********************************************************** [ 0.098718] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.100019] Getting VERSION: 1050014 [ 0.100480] Getting VERSION: 1050014 [ 0.100937] Getting ID: 0 [ 0.101302] Getting ID: f000000 [ 0.101707] Getting LVT0: 8700 [ 0.102101] Getting LVT1: 8400 [ 0.102577] enabled ExtINT on CPU#0 [ 0.110021] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.111945] ENABLING IO-APIC IRQs [ 0.112413] init IO_APIC IRQs [ 0.112795] apic 0 pin 0 not connected [ 0.114426] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.115438] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.116436] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.120047] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.121041] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.122024] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.123047] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.124034] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.125015] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.130035] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.131025] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.132058] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.133062] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.134064] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.135073] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.140034] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.141051] apic 0 pin 16 not connected [ 0.141543] apic 0 pin 17 not connected [ 0.142022] apic 0 pin 18 not connected [ 0.142560] apic 0 pin 19 not connected [ 0.143040] apic 0 pin 20 not connected [ 0.143530] apic 0 pin 21 not connected [ 0.144012] apic 0 pin 22 not connected [ 0.144501] apic 0 pin 23 not connected [ 0.145138] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.150056] TSC deadline timer enabled [ 0.157186] regulator-dummy: no parameters [ 0.158309] NET: Registered protocol family 16 [ 0.160561] ------------[ cut here ]------------ [ 0.161315] WARNING: CPU: 0 PID: 1 at drivers/spi/spi.c:2434 spi_init+0x5c/0x81() [ 0.162667] CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc5-00044-g9b84294 #6 [ 0.167195] 00000000 00000000 51c75ef0 4160e32b 51c75f0c 4103776f 00000982 41abbd9c [ 0.168590] 00000000 41abbd40 51e60ea0 51c75f1c 41037817 00000009 00000000 51c75f28 [ 0.170011] 41abbd9c 00000000 51c75f88 41a82c87 00000000 53ff7821 51c75f00 4104e04b [ 0.171428] Call Trace: [ 0.171820] [<4160e32b>] dump_stack+0x16/0x18 [ 0.172513] [<4103776f>] warn_slowpath_common+0x61/0x78 [ 0.173394] [<41abbd9c>] ? spi_init+0x5c/0x81 [ 0.174081] [<41abbd40>] ? ftrace_define_fields_spi_transfer+0x85/0x85 [ 0.175070] [<41037817>] warn_slowpath_null+0x14/0x18 [ 0.175871] [<41abbd9c>] spi_init+0x5c/0x81 [ 0.176584] [<41a82c87>] do_one_initcall+0x100/0x1aa [ 0.177382] [<4104e04b>] ? parse_args+0x2c7/0x3e1 [ 0.178120] [<41a82435>] ? do_early_param+0x73/0x73 [ 0.178892] [<41a82e0c>] kernel_init_freeable+0xdb/0x158 [ 0.179736] [<41a82e0c>] ? kernel_init_freeable+0xdb/0x158 [ 0.180020] [<4160ab57>] kernel_init+0xd/0xb8 [ 0.180755] [<41615980>] ret_from_kernel_thread+0x20/0x30 [ 0.181634] [<4160ab4a>] ? rest_init+0xa5/0xa5 [ 0.182354] ---[ end trace d94d5f4e01dcfac4 ]--- [ 0.210073] cpuidle: using governor menu [ 0.211402] ACPI: bus type PCI registered [ 0.212237] dca service started, version 1.12.1 [ 0.213047] PCI: Using configuration type 1 for base access [ 0.247873] Running resizable hashtable tests... [ 0.248676] Adding 2048 keys [ 0.580513] Traversal complete: counted=2048, nelems=2048, entries=2048 [ 0.581786] Table expansion iteration 0... [ 0.610164] Verifying lookups... [ 0.610798] Table expansion iteration 1... [ 0.640176] Verifying lookups... [ 0.640913] Table expansion iteration 2... [ 0.670223] Verifying lookups... [ 0.671027] Table expansion iteration 3... [ 0.700294] Verifying lookups... [ 0.701478] Table shrinkage iteration 0... [ 0.730126] Verifying lookups... [ 0.730891] Table shrinkage iteration 1... [ 0.760115] Verifying lookups... [ 0.761074] Table shrinkage iteration 2... [ 0.790080] Verifying lookups... [ 0.790824] Table shrinkage iteration 3... [ 0.820062] Verifying lookups... [ 0.820995] Deleting 2048 keys [ 1.120773] ACPI: Added _OSI(Module Device) [ 1.121584] ACPI: Added _OSI(Processor Device) [ 1.122413] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.123320] ACPI: Added _OSI(Processor Aggregator Device) [ 1.126222] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 1.136627] ACPI: Interpreter enabled [ 1.137405] ACPI: (supports S0 S4 S5) [ 1.137996] ACPI: Using IOAPIC for interrupt routing [ 1.140158] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.157314] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.158246] acpi PNP0A03:00: _OSC: OS supports [Segments MSI] [ 1.159099] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 1.160855] PCI host bridge to bus 0000:00 [ 1.161470] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.162262] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 1.163183] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 1.164100] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.165172] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 1.166245] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 1.167984] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 1.169886] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 1.173072] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] [ 1.175506] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.177243] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.178559] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.180016] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.182091] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 1.183860] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 1.185429] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 1.187654] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 1.190805] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 1.193684] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 1.202278] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 1.208403] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 1.211283] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [ 1.215504] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 1.222275] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 1.224283] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 1.226081] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] [ 1.231680] pci_bus 0000:00: on NUMA node 0 [ 1.234021] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 1.235607] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 1.237251] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 1.238798] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 1.240190] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 1.242485] ACPI: Enabled 16 GPEs in block 00 to 0F [ 1.245369] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 1.246530] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.248108] vgaarb: loaded [ 1.248641] vgaarb: bridge control possible 0000:00:02.0 [ 1.251366] EDAC MC: Ver: 3.0.0 [ 1.253639] PCI: Using ACPI for IRQ routing [ 1.254525] PCI: pci_cache_line_size set to 64 bytes [ 1.255697] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 1.256928] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff] [ 1.261659] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 1.263008] Switched to clocksource kvm-clock [ 1.264691] Warning: could not register annotated branches stats [ 1.324187] FS-Cache: Loaded [ 1.324821] CacheFiles: Loaded [ 1.325545] pnp: PnP ACPI init [ 1.326338] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 1.327984] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.329144] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 1.330802] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.331966] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 1.333614] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 1.334707] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 1.336191] pnp 00:03: [dma 2] [ 1.336842] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.338190] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 1.339716] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 1.341044] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 1.342598] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.343789] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 1.345396] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.347440] pnp: PnP ACPI: found 7 devices [ 1.384851] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.386013] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.387405] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.388705] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 1.390295] NET: Registered protocol family 1 [ 1.391338] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.392661] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.394067] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.395446] pci 0000:00:02.0: Video device with shadowed ROM [ 1.396741] PCI: CLS 0 bytes, default 64 [ 1.398609] Unpacking initramfs... [ 2.640338] Freeing initrd memory: 24852K (527ab000 - 53ff0000) [ 2.648698] apm: BIOS not found. [ 2.652244] The force parameter has not been set to 1. The Iris poweroff handler will not be installed. [ 2.653767] NatSemi SCx200 Driver [ 2.654614] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0 [ 2.657470] spin_lock-torture: Creating torture_shuffle task [ 2.658499] spin_lock-torture: torture_shuffle task started [ 2.659502] spin_lock-torture: Creating torture_stutter task [ 2.660544] spin_lock-torture: Creating lock_torture_writer task [ 2.661559] spin_lock-torture: torture_stutter task started [ 2.662554] spin_lock-torture: Creating lock_torture_writer task [ 2.663630] spin_lock-torture: lock_torture_writer task started [ 2.664749] spin_lock-torture: Creating lock_torture_stats task [ 2.665800] spin_lock-torture: lock_torture_writer task started [ 2.666965] torture_init_begin: refusing rcu init: spin_lock running [ 2.668890] futex hash table entries: 256 (order: 1, 11264 bytes) [ 2.670041] spin_lock-torture: lock_torture_stats task started [ 2.690502] zpool: loaded [ 2.691189] VFS: Disk quotas dquot_6.5.2 [ 2.692020] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.693770] ntfs: driver 2.1.31 [Flags: R/O]. [ 2.694756] efs: 1.0a - http://aeschi.ch.eu.org/efs/ [ 2.697177] SGI XFS with ACLs, security attributes, no debug enabled [ 2.698718] befs: version: 0.9.3 [ 2.699809] gfs2: GFS2 installed [ 2.700635] msgmni has been set to 595 [ 2.707052] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 2.708420] io scheduler noop registered [ 2.709165] io scheduler deadline registered (default) [ 2.710191] start plist test [ 2.719510] end plist test [ 2.719980] test_string_helpers: Running tests... [ 2.722586] test_firmware: interface ready [ 2.724762] crc32: CRC_LE_BITS = 8, CRC_BE BITS = 8 [ 2.725662] crc32: self tests passed, processed 225944 bytes in 720636 nsec [ 2.727551] crc32c: CRC_LE_BITS = 8 [ 2.728238] crc32c: self tests passed, processed 225944 bytes in 310556 nsec [ 2.784521] crc32_combine: 8373 self tests passed [ 2.819966] crc32c_combine: 8373 self tests passed [ 2.821100] xz_dec_test: module loaded [ 2.821803] xz_dec_test: Create a device node with 'mknod xz_dec_test c 253 0' and write .xz files to it. [ 2.824665] ipmi message handler version 39.2 [ 2.825316] ipmi device interface [ 2.825942] IPMI System Interface driver. [ 2.826772] ipmi_si: Unable to find any System Interface(s) [ 2.827597] IPMI Watchdog: driver initialized [ 2.828676] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.829750] ACPI: Power Button [PWRF] [ 2.830989] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 2.888240] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.934514] serial 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.937569] toshiba: not a supported Toshiba laptop [ 2.938421] scx200_gpio: no SCx200 gpio present [ 2.939188] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing [ 2.940241] platform pc8736x_gpio.0: no device found [ 2.941119] nsc_gpio initializing [ 2.941597] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 2.942434] Linux agpgart interface v0.103 [ 2.943858] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 2.949849] loop: module loaded [ 2.950506] HP CISS Driver (v 3.6.26) [ 2.951639] MM: desc_per_page = 128 [ 2.965090] mtip32xx Version 1.3.1 [ 2.966402] nullb0: unknown partition table [ 2.967788] nullb1: unknown partition table [ 2.971860] null: module loaded [ 2.982578] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 2.984007] Phantom Linux Driver, version n0.9.8, init OK [ 2.985271] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 2.986171] c2port c2port0: C2 port uc added [ 2.986595] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 2.988419] Uniform Multi-Platform E-IDE driver [ 2.990897] ide-gd driver 1.18 [ 2.991402] ide-cd driver 5.00 [ 2.993032] SSFDC read-only Flash Translation layer [ 2.993848] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.994831] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue [ 2.995949] device id = 2440 [ 2.996381] device id = 2480 [ 2.996807] device id = 24c0 [ 2.997210] device id = 24d0 [ 2.997580] device id = 25a1 [ 2.998019] device id = 2670 [ 2.998487] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 2.999438] scx200_docflash: NatSemi SCx200 DOCCS Flash Driver [ 3.038961] No valid DiskOnChip devices found [ 3.039741] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.041094] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.044876] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.046181] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.047473] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.048775] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.060033] nand: device found, Manufacturer ID: 0x98, Chip ID: 0x39 [ 3.060969] nand: Toshiba NAND 128MiB 1,8V 8-bit [ 3.061581] nand: 128MiB, SLC, page size: 512, OOB size: 16 [ 3.062532] flash size: 128 MiB [ 3.063026] page size: 512 bytes [ 3.063467] OOB area size: 16 bytes [ 3.063993] sector size: 16 KiB [ 3.064467] pages number: 262144 [ 3.064946] pages per sector: 32 [ 3.065377] bus width: 8 [ 3.065753] bits in sector size: 14 [ 3.066291] bits in page size: 9 [ 3.066771] bits in OOB size: 4 [ 3.067237] flash size with OOB: 135168 KiB [ 3.067827] page address bytes: 4 [ 3.068314] sector address bytes: 3 [ 3.068856] options: 0x42 [ 3.069789] Scanning device for bad blocks [ 3.096351] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 3.097228] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 3.100926] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 3.103087] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.104004] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.105564] mousedev: PS/2 mouse device common for all mice [ 3.106544] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0) [ 3.108450] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 3.109793] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 3.113907] mk712: device not present [ 3.114962] I2O subsystem v1.325 [ 3.115433] i2o: max drivers = 8 [ 3.118123] I2O Bus Adapter OSM v1.317 [ 3.118712] I2O Block Device OSM v1.325 [ 3.119680] I2O ProcFS OSM v1.316 [ 3.120318] i2c /dev entries driver [ 3.121753] i2c-parport-light: adapter type unspecified [ 3.122934] isa i2c-pca-isa.0: Please specify I/O base [ 3.123965] Driver for 1-wire Dallas network protocol. [ 3.124966] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 3.125993] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 3.127584] power_supply test_ac: uevent [ 3.128178] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 3.129026] power_supply test_ac: prop ONLINE=1 [ 3.129650] power_supply test_ac: power_supply_changed [ 3.130482] power_supply test_ac: power_supply_changed_work [ 3.131272] power_supply test_ac: uevent [ 3.131821] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 3.132638] power_supply test_ac: prop ONLINE=1 [ 3.133567] power_supply test_battery: uevent [ 3.134176] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 3.135123] power_supply test_battery: prop STATUS=Discharging [ 3.135945] power_supply test_battery: prop CHARGE_TYPE=Fast [ 3.136749] power_supply test_battery: prop HEALTH=Good [ 3.137435] power_supply test_battery: prop PRESENT=1 [ 3.138170] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 3.139001] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 3.139874] power_supply test_battery: prop CHARGE_FULL=100 [ 3.140706] power_supply test_battery: prop CHARGE_NOW=50 [ 3.141421] power_supply test_battery: prop CAPACITY=50 [ 3.142192] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 3.143110] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 3.144027] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 3.144932] power_supply test_battery: prop MODEL_NAME=Test battery [ 3.145826] power_supply test_battery: prop MANUFACTURER=Linux [ 3.146686] power_supply test_battery: prop SERIAL_NUMBER=3.18.0-rc5-00044-g9b84294 [ 3.147800] power_supply test_battery: prop TEMP=26 [ 3.148553] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 3.149707] power_supply test_battery: power_supply_changed [ 3.150553] power_supply test_battery: power_supply_changed_work [ 3.151420] power_supply test_battery: uevent [ 3.152043] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 3.152975] power_supply test_battery: prop STATUS=Discharging [ 3.153752] power_supply test_battery: prop CHARGE_TYPE=Fast [ 3.154585] power_supply test_battery: prop HEALTH=Good [ 3.155333] power_supply test_battery: prop PRESENT=1 [ 3.156060] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 3.156845] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 3.157696] power_supply test_battery: prop CHARGE_FULL=100 [ 3.158471] power_supply test_battery: prop CHARGE_NOW=50 [ 3.159260] power_supply test_battery: prop CAPACITY=50 [ 3.160218] power_supply test_usb: uevent [ 3.160781] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 3.161567] power_supply test_usb: prop ONLINE=1 [ 3.162249] power_supply test_usb: power_supply_changed [ 3.164487] applesmc: supported laptop not found! [ 3.165162] applesmc: driver init failed (ret=-19)! [ 3.170037] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 3.170904] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 3.171774] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 3.172693] power_supply test_battery: prop MODEL_NAME=Test battery [ 3.173566] power_supply test_battery: prop MANUFACTURER=Linux [ 3.174391] power_supply test_battery: prop SERIAL_NUMBER=3.18.0-rc5-00044-g9b84294 [ 3.175514] power_supply test_battery: prop TEMP=26 [ 3.176197] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 3.177002] power_supply test_usb: power_supply_changed_work [ 3.177769] power_supply test_usb: uevent [ 3.178358] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 3.179192] power_supply test_usb: prop ONLINE=1 [ 3.180504] sdhci: Secure Digital Host Controller Interface driver [ 3.181379] sdhci: Copyright(c) Pierre Ossman [ 3.182086] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 3.182946] wbsd: Copyright(c) Pierre Ossman [ 3.183706] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.185937] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 3.189438] hdaps: supported laptop not found! [ 3.190149] hdaps: driver init failed (ret=-19)! [ 3.191679] [ 3.191679] printing PIC contents [ 3.192377] ... PIC IMR: ffff [ 3.192816] ... PIC IRR: 1013 [ 3.193279] ... PIC ISR: 0000 [ 3.193712] ... PIC ELCR: 0c00 [ 3.194143] printing local APIC contents on CPU#0/0: [ 3.194930] ... APIC ID: 00000000 (0) [ 3.195510] ... APIC VERSION: 01050014 [ 3.196071] ... APIC TASKPRI: 00000000 (00) [ 3.196657] ... APIC PROCPRI: 00000000 [ 3.197162] ... APIC LDR: 01000000 [ 3.197652] ... APIC DFR: ffffffff [ 3.198142] ... APIC SPIV: 000001ff [ 3.198653] ... APIC ISR field: [ 3.199138] 0000000000000000000000000000000000000000000000000000000000000000 [ 3.200125] ... APIC TMR field: [ 3.200125] 0000000002000000000000000000000000000000000000000000000000000000 [ 3.200125] ... APIC IRR field: [ 3.200125] 0000000000000000000000000000000000000000000000000000000000008000 [ 3.200125] ... APIC ESR: 00000000 [ 3.200125] ... APIC ICR: 00000831 [ 3.200125] ... APIC ICR2: 01000000 [ 3.200125] ... APIC LVTT: 000400ef [ 3.200125] ... APIC LVTPC: 00000400 [ 3.200125] ... APIC LVT0: 00010700 [ 3.200125] ... APIC LVT1: 00000400 [ 3.200125] ... APIC LVTERR: 000000fe [ 3.200125] ... APIC TMICT: 00000000 [ 3.200125] ... APIC TMCCT: 00000000 [ 3.200125] ... APIC TDCR: 00000000 [ 3.200125] [ 3.209843] number of MP IRQ sources: 15. [ 3.210459] number of IO-APIC #0 registers: 24. [ 3.211134] testing the IO APIC....................... [ 3.211901] IO APIC #0...... [ 3.212347] .... register #00: 00000000 [ 3.212939] ....... : physical APIC id: 00 [ 3.213522] ....... : Delivery Type: 0 [ 3.214087] ....... : LTS : 0 [ 3.214688] .... register #01: 00170011 [ 3.215218] ....... : max redirection entries: 17 [ 3.215927] ....... : PRQ implemented: 0 [ 3.216549] ....... : IO APIC version: 11 [ 3.217149] .... register #02: 00000000 [ 3.217685] ....... : arbitration: 00 [ 3.218263] .... IRQ redirection table: [ 3.218814] 1 0 0 0 0 0 0 00 [ 3.219478] 0 0 0 0 0 1 1 31 [ 3.220169] 0 0 0 0 0 1 1 30 [ 3.220845] 0 0 0 0 0 1 1 33 [ 3.221489] 1 0 0 0 0 1 1 34 [ 3.222169] 1 1 0 0 0 1 1 35 [ 3.222853] 0 0 0 0 0 1 1 36 [ 3.223573] 0 0 0 0 0 1 1 37 [ 3.224228] 0 0 0 0 0 1 1 38 [ 3.224870] 0 1 0 0 0 1 1 39 [ 3.225491] 1 1 0 0 0 1 1 3A [ 3.226171] 1 1 0 0 0 1 1 3B [ 3.226845] 0 0 0 0 0 1 1 3C [ 3.227525] 0 0 0 0 0 1 1 3D [ 3.228222] 0 0 0 0 0 1 1 3E [ 3.228870] 0 0 0 0 0 1 1 3F [ 3.229534] 1 0 0 0 0 0 0 00 [ 3.230249] 1 0 0 0 0 0 0 00 [ 3.230926] 1 0 0 0 0 0 0 00 [ 3.231603] 1 0 0 0 0 0 0 00 [ 3.232312] 1 0 0 0 0 0 0 00 [ 3.233010] 1 0 0 0 0 0 0 00 [ 3.233662] 1 0 0 0 0 0 0 00 [ 3.234352] 1 0 0 0 0 0 0 00 [ 3.235009] IRQ to pin mappings: [ 3.235515] IRQ0 -> 0:2 [ 3.235928] IRQ1 -> 0:1 [ 3.236356] IRQ3 -> 0:3 [ 3.236770] IRQ4 -> 0:4 [ 3.237177] IRQ5 -> 0:5 [ 3.237549] IRQ6 -> 0:6 [ 3.237971] IRQ7 -> 0:7 [ 3.238382] IRQ8 -> 0:8 [ 3.238803] IRQ9 -> 0:9 [ 3.239208] IRQ10 -> 0:10 [ 3.239642] IRQ11 -> 0:11 [ 3.240125] IRQ12 -> 0:12 [ 3.240548] IRQ13 -> 0:13 [ 3.240976] IRQ14 -> 0:14 [ 3.241388] IRQ15 -> 0:15 [ 3.241825] .................................... done. [ 3.242626] Using IPI Shortcut mode [ 3.243672] Running ring buffer tests... [ 3.311837] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 3.313492] evbug: Connected device: input3 (ImExPS/2 Generic Explorer Mouse at isa0060/serio1/input0) [ 3.640126] tsc: Refined TSC clocksource calibration: 2693.504 MHz [ 13.240101] finished [ 13.240493] CPU 0: [ 13.240821] events: 999 [ 13.241452] dropped bytes: 0 [ 13.242056] alloced bytes: 77232 [ 13.242689] written bytes: 75750 [ 13.243335] biggest event: 93 [ 13.243946] smallest event: 0 [ 13.245077] read events: 999 [ 13.245687] lost events: 0 [ 13.246270] total events: 999 [ 13.246881] recorded len bytes: 77232 [ 13.247505] recorded size bytes: 75750 [ 13.248141] Ring buffer PASSED! [ 13.251264] Freeing unused kernel memory: 552K (41a82000 - 41b0c000) [ 13.260123] random: init urandom read with 2 bits of entropy available mountall: ply-event-loop.c:497: ply_event_loop_new: Assertion `loop->epoll_fd >= 0' failed. General error mounting filesystems. A maintenance shell will now be started. CONTROL-D will terminate this shell and reboot the system. wfg: rebooting [ 13.341343] Unregister pv shared memory for cpu 0 [ 13.342121] spin_lock-torture: Unscheduled system shutdown detected [ 13.344208] reboot: Restarting system [ 13.344770] reboot: machine restart Elapsed time: 20 qemu-system-x86_64 -enable-kvm -cpu Haswell,+smep,+smap -kernel /kernel/i386-randconfig-ib0-11221632/9b84294398291359d6c8f4ac4f36c7c666c6948a/vmlinuz-3.18.0-rc5-00044-g9b84294 -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-ib0-11221632/glikely:devicetree:next-overlay:9b84294398291359d6c8f4ac4f36c7c666c6948a:bisect-linux-4/.vmlinuz-9b84294398291359d6c8f4ac4f36c7c666c6948a-20141122180436-1-kbuild branch=glikely/devicetree/next-overlay BOOT_IMAGE=/kernel/i386-randconfig-ib0-11221632/9b84294398291359d6c8f4ac4f36c7c666c6948a/vmlinuz-3.18.0-rc5-00044-g9b84294 drbd.minor_count=8' -initrd /kernel-tests/initrd/quantal-core-i386.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-quantal-kbuild-21 -serial file:/dev/shm/kboot/serial-quantal-kbuild-21 -daemonize -display none -monitor null