early console in setup code Probing EDD (edd=off to disable)... ok [ 0.000000] Linux version 3.18.0-rc1-00274-g59fa38d (kbuild@lkp-hsx01) (gcc version 4.9.1 (Debian 4.9.1-19) ) #910 Fri Nov 21 14:04:03 CST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x1000000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x027fffff] [ 0.000000] Base memory trampoline at [8009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x13a00000-0x13bfffff] [ 0.000000] [mem 0x13a00000-0x13bfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x10000000-0x139fffff] [ 0.000000] [mem 0x10000000-0x139fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x13c00000-0x13ffdfff] [ 0.000000] [mem 0x13c00000-0x13dfffff] page 2M [ 0.000000] [mem 0x13e00000-0x13ffdfff] page 4k [ 0.000000] BRK [0x01f26000, 0x01f26fff] PGTABLE [ 0.000000] BRK [0x01f27000, 0x01f27fff] PGTABLE [ 0.000000] cma: dma_contiguous_reserve(limit 13ffe000) [ 0.000000] cma: dma_contiguous_reserve: reserving 16 MiB for global area [ 0.000000] cma: cma_declare_contiguous(size 1000000, base 00000000, limit 13ffe000 alignment 00000000) [ 0.000000] cma: Reserved 16 MiB at 12c00000 [ 0.000000] RAMDISK: [mem 0x13cbd000-0x13feffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000FD9A0 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x13FFE4B0 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x13FFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x13FFE4F0 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0x13FFFF40 000040 [ 0.000000] ACPI: SSDT 0x13FFF800 000735 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x13FFF6E0 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x13FFF6A0 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffc000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 319MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 13ffe000 [ 0.000000] low ram: 0 - 13ffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13ffd001, primary cpu clock [ 0.000000] BRK [0x01f28000, 0x01f28fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00001000-0x13ffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] free_area_init_node: node 0, pgdat 81622480, node_mem_map 92980020 [ 0.000000] Normal zone: 640 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 81820 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffc000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] mapped IOAPIC to ffffb000 (fec00000) [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 15df9c0 [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81180 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-ha3-1109/time:fortglx:3.19:time:59fa38d60ca4bc7a2efffae1b40aa7960374ef9d:bisect-linux-2/.vmlinuz-59fa38d60ca4bc7a2efffae1b40aa7960374ef9d-20141121140955-7-kbuild branch=time/fortglx/3.19/time BOOT_IMAGE=/kernel/i386-randconfig-ha3-1109/59fa38d60ca4bc7a2efffae1b40aa7960374ef9d/vmlinuz-3.18.0-rc1-00274-g59fa38d drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 288988K/327280K available (3653K kernel code, 398K rwdata, 2252K rodata, 420K init, 8696K bss, 38292K reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB) [ 0.000000] pkmap : 0xff800000 - 0xffa00000 (2048 kB) [ 0.000000] vmalloc : 0x947fe000 - 0xff7fe000 (1712 MB) [ 0.000000] lowmem : 0x80000000 - 0x93ffe000 ( 319 MB) [ 0.000000] .init : 0x8162b000 - 0x81694000 ( 420 kB) [ 0.000000] .data : 0x81391b22 - 0x81629b60 (2656 kB) [ 0.000000] .text : 0x81000000 - 0x81391b22 (3654 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 0 [ 0.000000] CPU 0 irqstacks, hard=80094000 soft=80096000 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] memory used by lock dependency info: 4911 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] ------------------------ [ 0.000000] | Locking API testsuite: [ 0.000000] ---------------------------------------------------------------------------- [ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.000000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] recursive read-lock: | ok | | ok | [ 0.000000] recursive read-lock #2: | ok | | ok | [ 0.000000] mixed read-write-lock: | ok | | ok | [ 0.000000] mixed write-read-lock: | ok | | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/123: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/123: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/132: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/132: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/213: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/213: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/231: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/231: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/312: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/312: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/321: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/321: ok | ok | ok | [ 0.000000] hard-irq read-recursion/123: ok | [ 0.000000] soft-irq read-recursion/123: ok | [ 0.000000] hard-irq read-recursion/132: ok | [ 0.000000] soft-irq read-recursion/132: ok | [ 0.000000] hard-irq read-recursion/213: ok | [ 0.000000] soft-irq read-recursion/213: ok | [ 0.000000] hard-irq read-recursion/231: ok | [ 0.000000] soft-irq read-recursion/231: ok | [ 0.000000] hard-irq read-recursion/312: ok | [ 0.000000] soft-irq read-recursion/312: ok | [ 0.000000] hard-irq read-recursion/321: ok | [ 0.000000] soft-irq read-recursion/321: ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] | Wound/wait tests | [ 0.000000] --------------------- [ 0.000000] ww api failures: ok | ok | ok | [ 0.000000] ww contexts mixing: ok | ok | [ 0.000000] finishing ww context: ok | ok | ok | ok | [ 0.000000] locking mismatches: ok | ok | ok | [ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | [ 0.000000] spinlock nest unlocked: ok | [ 0.000000] ----------------------------------------------------- [ 0.000000] |block | try |context| [ 0.000000] ----------------------------------------------------- [ 0.000000] context: ok | ok | ok | [ 0.000000] try: ok | ok | ok | [ 0.000000] block: ok | ok | ok | [ 0.000000] spinlock: ok | ok | ok | [ 0.000000] ------------------------------------------------------- [ 0.000000] Good, all 253 testcases passed! | [ 0.000000] --------------------------------- [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2693.528 MHz processor [ 0.006666] Calibrating delay loop (skipped) preset value.. 5389.51 BogoMIPS (lpj=8978426) [ 0.006666] pid_max: default: 4096 minimum: 301 [ 0.006666] ACPI: Core revision 20140828 [ 0.006768] ACPI: All ACPI Tables successfully acquired [ 0.007743] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.008707] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.010274] mce: CPU supports 10 MCE banks [ 0.011026] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.011026] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.012746] CPU: Intel Core Processor (Haswell) (fam: 06, model: 3c, stepping: 01) [ 0.021458] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.023580] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.024466] Getting VERSION: 1050014 [ 0.025063] Getting VERSION: 1050014 [ 0.025662] Getting ID: 0 [ 0.026110] Getting ID: f000000 [ 0.026686] Getting LVT0: 8700 [ 0.027133] Getting LVT1: 8400 [ 0.027695] enabled ExtINT on CPU#0 [ 0.029624] ENABLING IO-APIC IRQs [ 0.030024] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.033426] init IO_APIC IRQs [ 0.033861] apic 0 pin 0 not connected [ 0.034431] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.035757] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.036701] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.037965] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.040034] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.041339] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.042657] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.043379] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.044358] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.045454] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.046431] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.046693] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.047697] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.050034] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.053366] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.054669] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.056700] apic 0 pin 16 not connected [ 0.060005] apic 0 pin 17 not connected [ 0.060635] apic 0 pin 18 not connected [ 0.061099] apic 0 pin 19 not connected [ 0.061629] apic 0 pin 20 not connected [ 0.062147] apic 0 pin 21 not connected [ 0.062782] apic 0 pin 22 not connected [ 0.063339] apic 0 pin 23 not connected [ 0.066834] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.067718] TSC deadline timer enabled [ 0.070029] prandom: seed boundary self test passed [ 0.071507] prandom: 100 self tests passed [ 0.072678] regulator-dummy: no parameters [ 0.073342] RTC time: 14:08:19, date: 11/21/14 [ 0.076788] NET: Registered protocol family 16 [ 0.077923] EISA bus registered [ 0.078445] cpuidle: using governor ladder [ 0.079275] ACPI: bus type PCI registered [ 0.079985] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX. [ 0.080010] PCI: PCI BIOS revision 2.10 entry at 0xfc6d5, last bus=0 [ 0.080747] PCI: Using configuration type 1 for base access [ 0.091602] Running resizable hashtable tests... [ 0.092358] Adding 2048 keys [ 0.093441] Traversal complete: counted=2048, nelems=2048, entries=2048 [ 0.094637] Table expansion iteration 0... [ 0.095469] Verifying lookups... [ 0.096123] Table expansion iteration 1... [ 0.096919] Verifying lookups... [ 0.097564] Table expansion iteration 2... [ 0.098572] Verifying lookups... [ 0.099221] Table expansion iteration 3... [ 0.100901] Verifying lookups... [ 0.101584] Table shrinkage iteration 0... [ 0.102546] Verifying lookups... [ 0.103182] Table shrinkage iteration 1... [ 0.103481] Verifying lookups... [ 0.104130] Table shrinkage iteration 2... [ 0.104870] Verifying lookups... [ 0.105508] Table shrinkage iteration 3... [ 0.106726] Verifying lookups... [ 0.107395] Deleting 2048 keys [ 0.109279] ACPI: Added _OSI(Module Device) [ 0.109947] ACPI: Added _OSI(Processor Device) [ 0.110009] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.110757] ACPI: Added _OSI(Processor Aggregator Device) [ 0.113398] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.121592] ACPI: Interpreter enabled [ 0.122202] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140828/hwxface-580) [ 0.123346] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140828/hwxface-580) [ 0.124873] ACPI: (supports S0 S3 S5) [ 0.125458] ACPI: Using IOAPIC for interrupt routing [ 0.126699] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.138966] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.139932] acpi PNP0A03:00: _OSC: OS supports [Segments] [ 0.140083] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.141636] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.143562] PCI host bridge to bus 0000:00 [ 0.144203] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.145050] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.146679] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.147625] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.148679] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.149819] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.153402] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.155372] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.159329] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] [ 0.161227] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.162331] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.163344] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.164239] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.165493] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.166702] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.167615] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.168993] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.170780] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.174926] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.183406] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.185204] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.186677] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [ 0.188658] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.196241] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 0.197178] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 0.198596] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] [ 0.204059] pci_bus 0000:00: on NUMA node 0 [ 0.205956] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.207288] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.208973] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.210610] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.212051] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.213628] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.214948] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.215698] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.216678] vgaarb: loaded [ 0.217024] vgaarb: bridge control possible 0000:00:02.0 [ 0.217983] ACPI: bus type USB registered [ 0.218631] usbcore: registered new interface driver usbfs [ 0.219401] usbcore: registered new interface driver hub [ 0.220109] usbcore: registered new device driver usb [ 0.220975] pps_core: LinuxPPS API ver. 1 registered [ 0.221718] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.223152] PTP clock support registered [ 0.223481] PCI: Using ACPI for IRQ routing [ 0.224314] PCI: pci_cache_line_size set to 64 bytes [ 0.225669] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.226690] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff] [ 0.228554] NET: Registered protocol family 8 [ 0.229626] NET: Registered protocol family 20 [ 0.230606] Switched to clocksource kvm-clock [ 0.231511] FS-Cache: Loaded [ 0.232039] pnp: PnP ACPI init [ 0.232587] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.233240] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.234245] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.235392] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.236322] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.237524] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.238464] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.239504] pnp 00:03: [dma 2] [ 0.240115] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.241516] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.243122] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.243383] ------------[ cut here ]------------ [ 0.243383] WARNING: CPU: 0 PID: 1 at kernel/time/timekeeping.c:1337 update_wall_time+0x4c4/0x604() [ 0.243383] Modules linked in: [ 0.243383] CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00274-g59fa38d #910 [ 0.243383] 00000000 00000000 80017b2c 8138aefc 80017b48 81036c2a 00000539 81066a6e [ 0.243383] 00000000 002aaaaa 00000000 80017b58 81036ca5 00000009 00000000 80017b84 [ 0.243383] 81066a6e 00000086 0032dcd5 00000000 00000009 0014ec06 00000000 00000000 [ 0.243383] Call Trace: [ 0.243383] [<8138aefc>] dump_stack+0x16/0x18 [ 0.243383] [<81036c2a>] warn_slowpath_common+0x5c/0x73 [ 0.243383] [<81066a6e>] ? update_wall_time+0x4c4/0x604 [ 0.243383] [<81036ca5>] warn_slowpath_null+0xf/0x13 [ 0.243383] [<81066a6e>] update_wall_time+0x4c4/0x604 [ 0.243383] [<8106b908>] tick_sched_timer+0x13f/0x1a2 [ 0.243383] [<81061bee>] __run_hrtimer+0x4b/0xb3 [ 0.243383] [<8106b7c9>] ? write_seqcount_begin+0x25/0x25 [ 0.243383] [<81061dbd>] hrtimer_interrupt+0xe6/0x20a [ 0.243383] [<810234d3>] local_apic_timer_interrupt+0x3c/0x3e [ 0.243383] [<81023842>] smp_apic_timer_interrupt+0x1e/0x2c [ 0.243383] [<81390c39>] apic_timer_interrupt+0x39/0x40 [ 0.243383] [<811b96d7>] ? serial8250_console_write+0x117/0x11f [ 0.243383] [<811b007b>] ? tty_port_open+0x43/0x99 [ 0.243383] [<81050000>] ? graph_unlock+0x51/0x6e [ 0.243383] [<81056ac1>] ? arch_local_irq_restore+0x5/0xb [ 0.243383] [<81058120>] console_unlock+0x31d/0x3c3 [ 0.243383] [<81058555>] vprintk_emit+0x38f/0x39b [ 0.243383] [<811c645c>] dev_vprintk_emit+0x1a5/0x1be [ 0.243383] [<81051920>] ? mark_held_locks+0x58/0x6e [ 0.243383] [<810535db>] ? lock_acquire+0x74/0x7f [ 0.243383] [<8113144f>] ? string+0x2d/0x97 [ 0.243383] [<811c648a>] dev_printk_emit+0x15/0x17 [ 0.243383] [<811c64d9>] __dev_printk+0x4d/0x58 [ 0.243383] [<811c650a>] dev_printk+0x26/0x28 [ 0.243383] [<81190bab>] pnp_add_device+0xab/0xc9 [ 0.243383] [<810ae1c4>] ? slab_free_hook+0x52/0x57 [ 0.243383] [<810af57a>] ? kfree+0x4d/0x9f [ 0.243383] [<811874cf>] ? acpi_walk_resources+0x69/0x78 [ 0.243383] [<8164972f>] pnpacpi_add_device_handler+0x1a8/0x1d8 [ 0.243383] [<811837eb>] acpi_ns_get_device_callback+0x113/0x11c [ 0.243383] [<811834fb>] acpi_ns_walk_namespace+0xad/0x166 [ 0.243383] [<81649520>] ? ispnpidacpi+0x9f/0x9f [ 0.243383] [<81183622>] acpi_get_devices+0x42/0x60 [ 0.243383] [<811836d8>] ? acpi_walk_namespace+0x98/0x98 [ 0.243383] [<81649587>] ? pnpacpi_init+0x67/0x67 [ 0.243383] [<81649520>] ? ispnpidacpi+0x9f/0x9f [ 0.243383] [<81649566>] pnpacpi_init+0x46/0x67 [ 0.243383] [<810021c0>] do_one_initcall+0x15e/0x16d [ 0.243383] [<8162b400>] ? do_early_param+0x14/0x73 [ 0.243383] [<81047257>] ? parse_args+0x197/0x272 [ 0.243383] [<8162bb76>] kernel_init_freeable+0xd6/0x14e [ 0.243383] [<81388009>] kernel_init+0x8/0xb3 [ 0.243383] [<81390420>] ret_from_kernel_thread+0x20/0x30 [ 0.243383] [<81388001>] ? rest_init+0xa2/0xa2 [ 0.243383] ---[ end trace e467c44e628492f6 ]--- [ 0.310086] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.311169] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.312192] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.313507] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.315146] pnp: PnP ACPI: found 7 devices [ 0.369894] PM-Timer running at invalid rate: 130% of normal - aborting. [ 0.371390] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.372584] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.373845] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.375033] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.376594] NET: Registered protocol family 2 [ 0.378119] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.379624] TCP bind hash table entries: 4096 (order: 5, 147456 bytes) [ 0.391537] TCP: Hash tables configured (established 4096 bind 4096) [ 0.393150] TCP: reno registered [ 0.393846] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.395225] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.396860] NET: Registered protocol family 1 [ 0.397803] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.399090] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.410134] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.411718] pci 0000:00:02.0: Video device with shadowed ROM [ 0.412494] PCI: CLS 0 bytes, default 64 [ 0.413851] Unpacking initramfs... [ 0.644936] Freeing initrd memory: 3276K (93cbd000 - 93ff0000) [ 0.646228] apm: BIOS not found. [ 0.647095] cryptomgr_test (14) used greatest stack depth: 7180 bytes left [ 0.648595] rcu-torture:--- Start of test: nreaders=1 nfakewriters=4 stat_interval=60 verbose=1 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 stall_cpu=0 stall_cpu_holdoff=10 n_barrier_cbs=0 onoff_interval=0 onoff_holdoff=0 [ 0.653767] rcu-torture: Creating rcu_torture_writer task [ 0.655172] rcu-torture: Creating rcu_torture_fakewriter task [ 0.656420] rcu-torture: rcu_torture_writer task started [ 0.657843] rcu-torture: Creating rcu_torture_fakewriter task [ 0.659104] rcu-torture: rcu_torture_fakewriter task started [ 0.660709] rcu-torture: Creating rcu_torture_fakewriter task [ 0.661426] rcu-torture: rcu_torture_fakewriter task started [ 0.662115] rcu-torture: Creating rcu_torture_fakewriter task [ 0.662829] rcu-torture: rcu_torture_fakewriter task started [ 0.663865] rcu-torture: Creating rcu_torture_reader task [ 0.664554] rcu-torture: rcu_torture_fakewriter task started [ 0.665246] rcu-torture: Creating rcu_torture_stats task [ 0.665912] rcu-torture: rcu_torture_reader task started [ 0.666565] rcu-torture: Creating torture_shuffle task [ 0.667228] rcu-torture: rcu_torture_stats task started [ 0.667865] rcu-torture: Creating torture_stutter task [ 0.668497] rcu-torture: torture_shuffle task started [ 0.669120] rcu-torture: Creating rcu_torture_cbflood task [ 0.669822] rcu-torture: torture_stutter task started [ 0.671271] futex hash table entries: 16 (order: -3, 704 bytes) [ 0.672546] Initialise system trusted keyring [ 0.673602] audit: initializing netlink subsys (disabled) [ 0.674770] audit: type=2000 audit(1416550099.858:1): initialized [ 0.676891] rcu-torture: rcu_torture_cbflood task started [ 0.678231] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.687509] zbud: loaded [ 0.688097] VFS: Disk quotas dquot_6.5.2 [ 0.688764] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.690930] ceph: loaded (mds proto 32) [ 0.694546] Key type asymmetric registered [ 0.695581] Asymmetric key parser 'x509' registered [ 0.698608] crc32: CRC_LE_BITS = 8, CRC_BE BITS = 8 [ 0.699642] crc32: self tests passed, processed 225944 bytes in 663044 nsec [ 0.701180] crc32c: CRC_LE_BITS = 8 [ 0.701597] crc32c: self tests passed, processed 225944 bytes in 307606 nsec [ 0.737241] crc32_combine: 8373 self tests passed [ 0.783059] crc32c_combine: 8373 self tests passed [ 0.783813] rbtree testing -> 21112 cycles [ 1.607010] augmented rbtree testing -> 30623 cycles [ 2.807955] tsc: Refined TSC clocksource calibration: 2693.507 MHz [ 2.909181] intel_idle: does not run on family 6 model 60 [ 2.910139] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.911015] ACPI: Power Button [PWRF] [ 2.911904] isapnp: Scanning for PnP cards... [ 3.524441] isapnp: No Plug & Play device found [ 3.525225] xenfs: not registering filesystem on non-xen platform [ 3.526363] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.555247] serial 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.557988] Non-volatile memory driver v1.3 [ 3.558659] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing [ 3.559682] platform pc8736x_gpio.0: no device found [ 3.560641] nsc_gpio initializing [ 3.561142] smapi::smapi_init, ERROR invalid usSmapiID [ 3.561973] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 3.563421] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 3.564602] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 3.565548] dummy-irq: no IRQ given. Use irq=N [ 3.566278] usbcore: registered new interface driver viperboard [ 3.567538] mtdoops: mtd device (mtddev=name/number) must be supplied [ 3.568555] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue [ 3.604104] No valid DiskOnChip devices found [ 3.604970] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.606419] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.607920] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.609383] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.610906] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.612384] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.613888] nand: device found, Manufacturer ID: 0x98, Chip ID: 0x39 [ 3.614912] nand: Toshiba NAND 128MiB 1,8V 8-bit [ 3.615618] nand: 128MiB, SLC, page size: 512, OOB size: 16 [ 3.616515] flash size: 128 MiB [ 3.617064] page size: 512 bytes [ 3.617573] OOB area size: 16 bytes [ 3.618144] sector size: 16 KiB [ 3.618644] pages number: 262144 [ 3.619145] pages per sector: 32 [ 3.619653] bus width: 8 [ 3.620076] bits in sector size: 14 [ 3.620651] bits in page size: 9 [ 3.621198] bits in OOB size: 4 [ 3.621682] flash size with OOB: 135168 KiB [ 3.622339] page address bytes: 4 [ 3.622835] sector address bytes: 3 [ 3.623322] options: 0x42 [ 3.625601] Scanning device for bad blocks [ 3.671813] kworker/u2:1 (67) used greatest stack depth: 7052 bytes left [ 3.672977] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 3.674015] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 3.676619] tlan: ThunderLAN driver v1.17 [ 3.677423] tlan: 0 devices installed, PCI: 0 EISA: 0 [ 3.678372] adummy: version 1.0 [ 3.679372] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.680459] ehci-pci: EHCI PCI platform driver [ 3.681730] fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver [ 3.682719] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver [ 3.683794] usbcore: registered new interface driver cdc_acm [ 3.684714] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 3.686004] usbcore: registered new interface driver usblp [ 3.686921] usbcore: registered new interface driver mdc800 [ 3.687905] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 3.689133] usbcore: registered new interface driver adutux [ 3.690060] usbcore: registered new interface driver emi26 - firmware loader [ 3.691250] usbcore: registered new interface driver emi62 - firmware loader [ 3.692396] usbcore: registered new interface driver ldusb [ 3.693250] usbcore: registered new interface driver rio500 [ 3.694113] usbcore: registered new interface driver usbtest [ 3.694861] usbcore: registered new interface driver usb_ehset_test [ 3.695652] usbcore: registered new interface driver usbsevseg [ 3.696395] usbcore: registered new interface driver yurex [ 3.697359] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 3.699418] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.700233] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.701252] usbcore: registered new interface driver hanwang [ 3.702333] usbcore: registered new interface driver sur40 [ 3.703154] Driver for 1-wire Dallas network protocol. [ 3.704216] applesmc: supported laptop not found! [ 3.704983] applesmc: driver init failed (ret=-19)! [ 3.706044] Modular ISDN core version 1.1.29 [ 3.706781] NET: Registered protocol family 34 [ 3.707472] DSP module 2.0 [ 3.707939] mISDN_dsp: DSP clocks every 80 samples. This equals 3 jiffies. [ 3.711692] gigaset: Driver for Gigaset 307x [ 3.712315] gigaset: no ISDN subsystem interface [ 3.713085] usbcore: registered new interface driver bas_gigaset [ 3.714013] bas_gigaset: USB Driver for Gigaset 307x [ 3.714894] platform eisa.0: Probing EISA bus 0 [ 3.715507] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 3.716593] beceem: Beceem Communications Inc. WiMAX driver, 5.2.45 [ 3.717515] Copyright 2010. Beceem Communications Inc [ 3.718337] usbcore: registered new interface driver usbbcm [ 3.719472] pss: mss_io, mss_dma, mss_irq and pss_io must be set. [ 3.720410] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996 [ 3.721578] ad1848: No ISAPnP cards found, trying standard ones... [ 3.722489] MediaTrix audio driver Copyright (C) by Hannu Savolainen 1993-1996 [ 3.723597] I/O, IRQ, DMA and type are mandatory [ 3.724437] YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 [ 3.725725] Netfilter messages via NETLINK v0.30. [ 3.726422] nf_conntrack version 0.5.0 (4822 buckets, 19288 max) [ 3.727977] ctnetlink v0.93: registering with nfnetlink. [ 3.728812] gre: GRE over IPv4 demultiplexor driver [ 3.729666] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.730576] TCP: highspeed registered [ 3.731117] TCP: vegas registered [ 3.731685] TCP: illinois registered [ 3.732193] Initializing XFRM netlink socket [ 3.732897] NET: Registered protocol family 4 [ 3.733563] can: controller area network core (rev 20120528 abi 9) [ 3.734536] can: failed to create /proc/net/can . CONFIG_PROC_FS missing? [ 3.735484] NET: Registered protocol family 29 [ 3.736154] NET: Registered protocol family 33 [ 3.736779] Key type rxrpc registered [ 3.737371] Key type rxrpc_s registered [ 3.738493] RxRPC: Registered security type 2 'rxkad' [ 3.739242] mpoa:atm_mpoa_init: mpc.c: initialized [ 3.741125] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 3.742587] DECnet: Routing cache hash table of 256 buckets, 9Kbytes [ 3.743568] NET: Registered protocol family 12 [ 3.744262] 8021q: 802.1Q VLAN Support v1.8 [ 3.746289] DCCP: Activated CCID 2 (TCP-like) [ 3.746985] DCCP: Activated CCID 3 (TCP-Friendly Rate Control) [ 3.748314] 9pnet: Installing 9P2000 support [ 3.749010] Key type ceph registered [ 3.749877] libceph: loaded (mon/osd proto 15/24) [ 3.751496] mpls_gso: MPLS GSO support [ 3.752685] [ 3.752685] printing PIC contents [ 3.753405] ... PIC IMR: ffff [ 3.754650] ... PIC IRR: 1012 [ 3.755098] ... PIC ISR: 0000 [ 3.755539] ... PIC ELCR: 0c00 [ 3.755990] printing local APIC contents on CPU#0/0: [ 3.756688] ... APIC ID: 00000000 (0) [ 3.756721] ... APIC VERSION: 01050014 [ 3.756721] ... APIC TASKPRI: 00000000 (00) [ 3.756721] ... APIC PROCPRI: 00000000 [ 3.756721] ... APIC LDR: 01000000 [ 3.756721] ... APIC DFR: ffffffff [ 3.756721] ... APIC SPIV: 000001ff [ 3.756721] ... APIC ISR field: [ 3.756721] 0000000000000000000000000000000000000000000000000000000000000000 [ 3.756721] ... APIC TMR field: [ 3.756721] 0000000002000000000000000000000000000000000000000000000000000000 [ 3.756721] ... APIC IRR field: [ 3.756721] 0000000000000000000000000000000000000000000000000000000000008000 [ 3.756721] ... APIC ESR: 00000000 [ 3.756721] ... APIC ICR: 00000831 [ 3.756721] ... APIC ICR2: 01000000 [ 3.756721] ... APIC LVTT: 000400ef [ 3.756721] ... APIC LVTPC: 00000400 [ 3.756721] ... APIC LVT0: 00010700 [ 3.756721] ... APIC LVT1: 00000400 [ 3.756721] ... APIC LVTERR: 000000fe [ 3.756721] ... APIC TMICT: 00000000 [ 3.756721] ... APIC TMCCT: 00000000 [ 3.756721] ... APIC TDCR: 00000000 [ 3.756721] [ 3.774932] number of MP IRQ sources: 15. [ 3.775504] number of IO-APIC #0 registers: 24. [ 3.776163] testing the IO APIC....................... [ 3.776922] IO APIC #0...... [ 3.777751] .... register #00: 00000000 [ 3.778344] ....... : physical APIC id: 00 [ 3.778958] ....... : Delivery Type: 0 [ 3.779512] ....... : LTS : 0 [ 3.780102] .... register #01: 00170011 [ 3.780670] ....... : max redirection entries: 17 [ 3.781425] ....... : PRQ implemented: 0 [ 3.782021] ....... : IO APIC version: 11 [ 3.782600] .... register #02: 00000000 [ 3.783138] ....... : arbitration: 00 [ 3.783770] .... IRQ redirection table: [ 3.784333] 1 0 0 0 0 0 0 00 [ 3.785031] 0 0 0 0 0 1 1 31 [ 3.785658] 0 0 0 0 0 1 1 30 [ 3.786315] 0 0 0 0 0 1 1 33 [ 3.787022] 1 0 0 0 0 1 1 34 [ 3.787665] 1 1 0 0 0 1 1 35 [ 3.788355] 0 0 0 0 0 1 1 36 [ 3.789006] 0 0 0 0 0 1 1 37 [ 3.789625] 0 0 0 0 0 1 1 38 [ 3.790457] 0 1 0 0 0 1 1 39 [ 3.791626] 1 1 0 0 0 1 1 3A [ 3.792274] 1 1 0 0 0 1 1 3B [ 3.792934] 0 0 0 0 0 1 1 3C [ 3.793590] 0 0 0 0 0 1 1 3D [ 3.794272] 0 0 0 0 0 1 1 3E [ 3.794961] 0 0 0 0 0 1 1 3F [ 3.795981] 1 0 0 0 0 0 0 00 [ 3.796662] 1 0 0 0 0 0 0 00 [ 3.797387] 1 0 0 0 0 0 0 00 [ 3.798075] 1 0 0 0 0 0 0 00 [ 3.798715] 1 0 0 0 0 0 0 00 [ 3.799368] 1 0 0 0 0 0 0 00 [ 3.800175] 1 0 0 0 0 0 0 00 [ 3.800862] 1 0 0 0 0 0 0 00 [ 3.801533] IRQ to pin mappings: [ 3.801989] IRQ0 -> 0:2 [ 3.802384] IRQ1 -> 0:1 [ 3.802770] IRQ3 -> 0:3 [ 3.803175] IRQ4 -> 0:4 [ 3.803595] IRQ5 -> 0:5 [ 3.804046] IRQ6 -> 0:6 [ 3.804455] IRQ7 -> 0:7 [ 3.804893] IRQ8 -> 0:8 [ 3.805279] IRQ9 -> 0:9 [ 3.805666] IRQ10 -> 0:10 [ 3.806090] IRQ11 -> 0:11 [ 3.806499] IRQ12 -> 0:12 [ 3.806989] IRQ13 -> 0:13 [ 3.807401] IRQ14 -> 0:14 [ 3.807861] IRQ15 -> 0:15 [ 3.808275] .................................... done. [ 3.809018] Using IPI Shortcut mode [ 3.809734] Loading compiled-in X.509 certificates [ 3.814453] Loaded X.509 cert 'Magrathea: Glacier signing key: 473a7a5ee5aa7ca742ef492cdd229fe6ce5cdec4' [ 3.816484] Magic number: 6:159:132 [ 3.817100] acpi device:07: hash matches [ 3.817668] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.818543] EDD information not available. [ 3.820537] Freeing unused kernel memory: 420K (8162b000 - 81694000) mount: mounting proc on /proc failed: No such device /etc/rcS.d/S00fbsetup: line 3: /sbin/modprobe: No such file or directory [ 3.839173] S00fbsetup (84) used greatest stack depth: 6908 bytes left Please wait: booting... mount: mounting proc on /proc failed: No such device grep: /proc/filesystems: No such file or directory Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory bootlogd. [ 3.861465] S07bootlogd (99) used greatest stack depth: 6836 bytes left mount: can't read '/proc/mounts': No such file or directory /etc/rcS.d/S37populate-volatile.sh: line 172: /proc/cmdline: No such file or directory grep: /proc/filesystems: No such file or directory Configuring network interfaces... [ 3.893562] nfsroot (132) used greatest stack depth: 6588 bytes left done. hwclock: can't open '/dev/misc/rtc': No such file or directory Running postinst /etc/rpm-postinsts/100... mount: no /proc/mounts wfg: skip syslogd Kernel tests: Boot OK! Kernel tests: Boot OK! mount: mounting proc on /proc failed: No such device /etc/rc5.d/S99-rc.local: line 19: /proc/176/oom_score_adj: No such file or directory sed: /lib/modules/3.18.0-rc1-00274-g59fa38d/modules.dep: No such file or directory xargs: modprobe: No such file or directory run-parts: /etc/kernel-tests/01-modprobe exited with code 127 grep: /proc/cmdline: No such file or directory grep: /proc/cmdline: No such file or directory Trinity v1.4pre Dave Jones Trinity v1.4pre Dave Jones Trinity v1.4pre Dave Jones [ 3.983009] random: trinity urandom read with 3 bits of entropy available Trinity v1.4pre Dave Jones Done parsing arguments. Marking all syscalls as enabled. [init] Enabled 351 syscalls. Disabled 0 syscalls. DANGER: RUNNING AS ROOT. Unless you are running in a virtual machine, this could cause serious problems such as overwriting CMOS or similar which could potentially make this machine unbootable without a firmware reset. ctrl-c now unless you really know what you are doing. [init] Marking syscall get_robust_list (312) as to be disabled. Done parsing arguments. Marking all syscalls as enabled. [init] Disabling syscalls marked as disabled by command line options [init] Marked syscall get_robust_list (312) as deactivated. Done parsing arguments. ## couldn't open logfile trinity.log [init] Marking syscall get_robust_list (312) as to be disabled. Done parsing arguments. ## couldn't open logfile trinity.log [init] Enabled 350 syscalls. Disabled 1 syscalls. DANGER: RUNNING AS ROOT. Unless you are running in a virtual machine, this could cause serious problems such as overwriting CMOS or similar which could potentially make this machine unbootable without a firmware reset. ctrl-c now unless you really know what you are doing. Couldn't read pid_max from proc [init] Using pid_max = 32768 [init] Kernel was tainted on startup. Will ignore flags that are already set. [init] Started watchdog process, PID is 198 [main] Main thread is alive. [main] Couldn't find socket cachefile. Regenerating. fcntl F_SETLKW: Permission denied fopen: No such file or directory Couldn't read pid_max from proc [init] Using pid_max = 32768 [init] Kernel was tainted on startup. Will ignore flags that are already set. [init] Started watchdog process, PID is 200 [main] Main thread is alive. fcntl F_SETLKW: Permission denied [ 60.666702] rcu-torture: rtc: 81e34300 ver: 1 tfle: 0 rta: 1 rtaf: 0 rtf: 0 rtmbe: 0 rtbke: 0 rtbre: 0 rtbf: 0 rtb: 0 nt: 1 barrier: 0/0:0 cbflood: 1 [ 60.668649] rcu-torture: Reader Pipe: 2 0 0 0 0 0 0 0 0 0 0 [ 60.669697] rcu-torture: Reader Batch: 2 0 0 0 0 0 0 0 0 0 0 [ 60.670772] rcu-torture: Free-Block Circulation: 0 0 0 0 0 0 0 0 0 0 0 lsmod: can't open '/proc/modules': No such file or directory BusyBox v1.19.4 (2012-04-22 09:22:10 PDT) multi-call binary. Usage: rmmod [-wfa] [MODULE]... lsmod: can't open '/proc/modules': No such file or directory BusyBox v1.19.4 (2012-04-22 09:22:10 PDT) multi-call binary. Usage: rmmod [-wfa] [MODULE]... lsmod: can't open '/proc/modules': No such file or directory BusyBox v1.19.4 (2012-04-22 09:22:10 PDT) multi-call binary. Usage: rmmod [-wfa] [MODULE]... run-parts: /etc/kernel-tests/99-rmmod exited with code 123 [ 64.037797] trinity (191) used greatest stack depth: 6572 bytes left mount: no /proc/mounts wfg: skip syslogd sed: /proc/mounts: No such file or directory sed: /proc/mounts: No such file or directory sed: /proc/mounts: No such file or directory Deconfiguring network interfaces... done. Sending all processes the TERM signal... mount: mounting proc on /proc failed: No such device Sending all processes the KILL signal... mount: mounting proc on /proc failed: No such device Unmounting remote filesystems... Deactivating swap... Unmounting local filesystems... grep: /proc/mounts: No such file or directory mount: can't read '/proc/mounts': No such file or directory Rebooting... [ 71.145903] Unregister pv shared memory for cpu 0 [ 71.146520] rcu-torture: Unscheduled system shutdown detected [ 71.147522] reboot: Restarting system [ 71.147945] reboot: machine restart Elapsed time: 75 qemu-system-x86_64 -enable-kvm -cpu Haswell,+smep,+smap -kernel /kernel/i386-randconfig-ha3-1109/59fa38d60ca4bc7a2efffae1b40aa7960374ef9d/vmlinuz-3.18.0-rc1-00274-g59fa38d -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-ha3-1109/time:fortglx:3.19:time:59fa38d60ca4bc7a2efffae1b40aa7960374ef9d:bisect-linux-2/.vmlinuz-59fa38d60ca4bc7a2efffae1b40aa7960374ef9d-20141121140955-7-kbuild branch=time/fortglx/3.19/time BOOT_IMAGE=/kernel/i386-randconfig-ha3-1109/59fa38d60ca4bc7a2efffae1b40aa7960374ef9d/vmlinuz-3.18.0-rc1-00274-g59fa38d drbd.minor_count=8' -initrd /kernel-tests/initrd/yocto-minimal-i386.cgz -m 320 -smp 1 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-yocto-kbuild-6 -serial file:/dev/shm/kboot/serial-yocto-kbuild-6 -daemonize -display none -monitor null