linux-kernel - [PATCH v2 net-net 0/4] Increase the limit of tuntap queues

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 25 Nov 2014 00:03:26 +0530
From:	Pankaj Gupta <pagupta@...hat.com>
To:	linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Cc:	davem@...emloft.net, jasowang@...hat.com, dgibson@...hat.com,
	vfalico@...il.com, edumazet@...gle.com, vyasevic@...hat.com,
	hkchu@...gle.com, xemul@...allels.com, therbert@...gle.com,
	bhutchings@...arflare.com, xii@...gle.com,
	stephen@...workplumber.org, jiri@...nulli.us,
	sergei.shtylyov@...entembedded.com, pagupta@...hat.com
Subject: [PATCH v2 net-net 0/4] Increase the limit of tuntap queues

Networking under KVM works best if we allocate a per-vCPU rx and tx
queue in a virtual NIC. This requires a per-vCPU queue on the host side.
Modern physical NICs have multiqueue support for large number of queues.
To scale vNIC to run multiple queues parallel to maximum number of vCPU's
we need to increase number of queues support in tuntap.   

Changes from v1
PATCH 2: David Miller     - sysctl changes to limit number of queues 
                            not required for unprivileged users(dropped).

Changes from RFC
PATCH 1: Sergei Shtylyov  - Add an empty line after declarations.
PATCH 2: Jiri Pirko -       Do not introduce new module paramaters.
	 Michael.S.Tsirkin- We can use sysctl for limiting max number
                            of queues.

This series is to increase the limit of tuntap queues. Original work is being 
done by 'jasowang@...hat.com'. I am taking this 'https://lkml.org/lkml/2013/6/19/29' 
patch series as a reference. As per discussion in the patch series:

There were two reasons which prevented us from increasing number of tun queues:

- The netdev_queue array in netdevice were allocated through kmalloc, which may 
  cause a high order memory allocation too when we have several queues. 
  E.g. sizeof(netdev_queue) is 320, which means a high order allocation would 
  happens when the device has more than 16 queues.

- We store the hash buckets in tun_struct which results a very large size of
  tun_struct, this high order memory allocation fail easily when the memory is
  fragmented.

The patch 60877a32bce00041528576e6b8df5abe9251fa73 increases the number of tx 
queues. Memory allocation fallback to vzalloc() when kmalloc() fails.

This series tries to address following issues:

- Increase the number of netdev_queue queues for rx similarly its done for tx 
  queues by falling back to vzalloc() when memory allocation with kmalloc() fails.

- Switches to use flex array to implement the flow caches to avoid higher order 
  allocations.

- Increase number of queues to 256, maximum number is equal to maximum number 
  of vCPUS allowed in a guest.

I have done some testing to test any regression with sample program which creates 
tun/tap for single queue / multiqueue device. I have also done testing with multiple 
parallel Netperf sessions from guest to host for different combination of queues 
and CPU's. It seems to be working fine without much increase in cpu load with the 
increase in number of queues.

For this test vhost threads are pinned to separate CPU's. Below are the results:
Host kernel: 3.18.rc4, Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 4 CPUS
NIC : Ethernet controller: Intel Corporation 82579LM Gigabit Network

1] Before patch applied limit: Single Queue
Guest, smp=2,
19:57:44     CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest  %gnice   %idle
19:57:44     all    2.90    0.00    3.68    0.98    0.13    0.61    0.00    4.64    0.00   87.06

2] Patch applied, Tested with 2 queues, with vhost threads pinned to different physical cpus
Guest, smp=2, queues =2
23:21:59     CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest  %gnice   %idle
23:21:59     all    1.80    0.00    1.57    1.49    0.18    0.23    0.00    1.41    0.00   93.32

3] Tested with 4 queues, with vhost threads pinned to different physical cpus
-------------------------------------------------------------------------------
Guest, smp=4, queues =4
23:09:43     CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest  %gnice   %idle
23:09:43     all    1.89    0.00    1.63    1.35    0.19    0.23    0.00    1.33    0.00   93.37

Patches Summary:
  net: allow large number of rx queues
  tuntap: Reduce the size of tun_struct by using flex array
  tuntap: Increase the number of queues in tun

 drivers/net/tun.c |   58 +++++++++++++++++++++++++++++++++++++++---------------
 net/core/dev.c    |   19 ++++++++++++-----
 2 files changed, 55 insertions(+), 22 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/