| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1416902662-19281-2-git-send-email-yingjoe.chen@mediatek.com>
Date: Tue, 25 Nov 2014 16:04:19 +0800
From: Yingjoe Chen <yingjoe.chen@...iatek.com>
To: Mark Rutland <mark.rutland@....com>,
Jason Cooper <jason@...edaemon.net>,
Thomas Gleixner <tglx@...utronix.de>,
Jiang Liu <jiang.liu@...ux.intel.com>,
Marc Zyngier <marc.zyngier@....com>
CC: Boris BREZILLON <boris.brezillon@...e-electrons.com>,
Russell King <linux@....linux.org.uk>,
Pawel Moll <pawel.moll@....com>, <devicetree@...r.kernel.org>,
<hc.yen@...iatek.com>, <srv_heupstream@...iatek.com>,
<yh.chen@...iatek.com>, <linux-kernel@...r.kernel.org>,
Grant Likely <grant.likely@...aro.org>,
Yijing Wang <wangyijing@...wei.com>,
Rob Herring <robh+dt@...nel.org>, <nathan.chung@...iatek.com>,
<yingjoe.chen@...il.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Yingjoe Chen <yingjoe.chen@...iatek.com>,
<eddie.huang@...iatek.com>, Bjorn Helgaas <bhelgaas@...gle.com>,
Sascha Hauer <kernel@...gutronix.de>,
<linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH v8 1/4] irqchip: gic: Support hierarchy irq domain.
Add support to use gic as a parent for stacked irq domain.
Signed-off-by: Yingjoe Chen <yingjoe.chen@...iatek.com>
---
drivers/irqchip/Kconfig | 1 +
drivers/irqchip/irq-gic.c | 77 ++++++++++++++++++++++++++++++++---------------
2 files changed, 54 insertions(+), 24 deletions(-)
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index b21f12f..7f34138 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -5,6 +5,7 @@ config IRQCHIP
config ARM_GIC
bool
select IRQ_DOMAIN
+ select IRQ_DOMAIN_HIERARCHY
select MULTI_IRQ_HANDLER
config GIC_NON_BANKED
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 38493ff..ab6069b 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -788,17 +788,16 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
{
if (hw < 32) {
irq_set_percpu_devid(irq);
- irq_set_chip_and_handler(irq, &gic_chip,
- handle_percpu_devid_irq);
+ irq_domain_set_info(d, irq, hw, &gic_chip, d->host_data,
+ handle_percpu_devid_irq, NULL, NULL);
set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
} else {
- irq_set_chip_and_handler(irq, &gic_chip,
- handle_fasteoi_irq);
+ irq_domain_set_info(d, irq, hw, &gic_chip, d->host_data,
+ handle_fasteoi_irq, NULL, NULL);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
gic_routable_irq_domain_ops->map(d, irq, hw);
}
- irq_set_chip_data(irq, d->host_data);
return 0;
}
@@ -858,6 +857,31 @@ static struct notifier_block gic_cpu_notifier = {
};
#endif
+static int gic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
+{
+ int i, ret;
+ irq_hw_number_t hwirq;
+ unsigned int type = IRQ_TYPE_NONE;
+ struct of_phandle_args *irq_data = arg;
+
+ ret = gic_irq_domain_xlate(domain, irq_data->np, irq_data->args,
+ irq_data->args_count, &hwirq, &type);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < nr_irqs; i++)
+ gic_irq_domain_map(domain, virq + i, hwirq + i);
+
+ return 0;
+}
+
+static const struct irq_domain_ops gic_irq_domain_hierarchy_ops = {
+ .xlate = gic_irq_domain_xlate,
+ .alloc = gic_irq_domain_alloc,
+ .free = irq_domain_free_irqs_top,
+};
+
static const struct irq_domain_ops gic_irq_domain_ops = {
.map = gic_irq_domain_map,
.unmap = gic_irq_domain_unmap,
@@ -948,18 +972,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
gic_cpu_map[i] = 0xff;
/*
- * For primary GICs, skip over SGIs.
- * For secondary GICs, skip over PPIs, too.
- */
- if (gic_nr == 0 && (irq_start & 31) > 0) {
- hwirq_base = 16;
- if (irq_start != -1)
- irq_start = (irq_start & ~31) + 16;
- } else {
- hwirq_base = 32;
- }
-
- /*
* Find out how many interrupts are supported.
* The GIC only supports up to 1020 interrupt sources.
*/
@@ -969,10 +981,31 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
gic_irqs = 1020;
gic->gic_irqs = gic_irqs;
- gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
+ if (node) { /* DT case */
+ const struct irq_domain_ops *ops = &gic_irq_domain_hierarchy_ops;
+
+ if (!of_property_read_u32(node, "arm,routable-irqs",
+ &nr_routable_irqs)) {
+ ops = &gic_irq_domain_ops;
+ gic_irqs = nr_routable_irqs;
+ }
+
+ gic->domain = irq_domain_add_linear(node, gic_irqs, ops, gic);
+ } else { /* Non-DT case */
+ /*
+ * For primary GICs, skip over SGIs.
+ * For secondary GICs, skip over PPIs, too.
+ */
+ if (gic_nr == 0 && (irq_start & 31) > 0) {
+ hwirq_base = 16;
+ if (irq_start != -1)
+ irq_start = (irq_start & ~31) + 16;
+ } else {
+ hwirq_base = 32;
+ }
+
+ gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
- if (of_property_read_u32(node, "arm,routable-irqs",
- &nr_routable_irqs)) {
irq_base = irq_alloc_descs(irq_start, 16, gic_irqs,
numa_node_id());
if (IS_ERR_VALUE(irq_base)) {
@@ -983,10 +1016,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
hwirq_base, &gic_irq_domain_ops, gic);
- } else {
- gic->domain = irq_domain_add_linear(node, nr_routable_irqs,
- &gic_irq_domain_ops,
- gic);
}
if (WARN_ON(!gic->domain))
--
1.8.1.1.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists