| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1416874644-12070-7-git-send-email-abrestic@chromium.org>
Date: Mon, 24 Nov 2014 16:17:18 -0800
From: Andrew Bresticker <abrestic@...omium.org>
To: Stephen Warren <swarren@...dotorg.org>,
Thierry Reding <thierry.reding@...il.com>,
Alexandre Courbot <gnurou@...il.com>,
linux-tegra@...r.kernel.org
Cc: Andrew Bresticker <abrestic@...omium.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Jassi Brar <jassisinghbrar@...il.com>,
Linus Walleij <linus.walleij@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Mathias Nyman <mathias.nyman@...el.com>,
Grant Likely <grant.likely@...aro.org>,
Alan Stern <stern@...land.harvard.edu>,
Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
Kishon Vijay Abraham I <kishon@...com>,
Felipe Balbi <balbi@...com>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-usb@...r.kernel.org
Subject: [PATCH V6 06/12] of: Update Tegra XUSB pad controller binding for USB
Add new bindings used for USB support by the Tegra XUSB pad controller.
This includes additional PHY types, USB-specific pinconfig properties, etc.
Signed-off-by: Andrew Bresticker <abrestic@...omium.org>
Acked-by: Linus Walleij <linus.walleij@...aro.org>
Reviewed-by: Stephen Warren <swarren@...dia.com>
---
No changes from v5.
Changes from v4:
- nvidia,usb2-port-num -> nvidia,usb2-port
- Made usb3-port a pinconfig property
- Adjusted property descriptions as suggested by Thierry.
No changes from v3.
Changes from v2:
- Added nvidia,otg-hs-curr-level-offset property.
- Dropped "-otg" from VBUS supplies.
- Added mbox-names property.
- Removed extra whitespace.
Changes from v1:
- Updated to use common mailbox bindings.
- Made USB3 port-to-lane mappins a top-level binding rather than a pinconfig
binding.
- Add #defines for the padctl lanes.
---
.../pinctrl/nvidia,tegra124-xusb-padctl.txt | 63 +++++++++++++++++++---
include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h | 7 +++
2 files changed, 64 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
index 2f9c0bd..80895d1 100644
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
@@ -21,6 +21,15 @@ Required properties:
- padctl
- #phy-cells: Should be 1. The specifier is the index of the PHY to reference.
See <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> for the list of valid values.
+- mboxes: Must contain an entry for the XUSB mailbox channel.
+ See ../mailbox/mailbox.txt for details.
+- mbox-names: Must include the following entries:
+ - xusb
+
+Optional properties:
+-------------------
+- vbus-{0,1,2}-supply: VBUS regulator for the corresponding UTMI pad.
+- vddio-hsic-supply: VDDIO regulator for the HSIC pads.
Lane muxing:
------------
@@ -50,26 +59,46 @@ Optional properties:
pin or group should be assigned to. Valid values for function names are
listed below.
- nvidia,iddq: Enables IDDQ mode of the lane. (0: no, 1: yes)
+- nvidia,usb2-port: USB2 port (0, 1, or 2) to which the lane is mapped.
+- nvidia,usb3-port: USB3 port (0 or 1) to which the lane is mapped.
+- nvidia,hsic-strobe-trim: HSIC strobe trimmer value.
+- nvidia,hsic-rx-strobe-trim: HSIC RX strobe trimmer value. (0 - 7)
+- nvidia,hsic-rx-data-trim: HSIC RX data trimmer value. (0 - 7)
+- nvidia,hsic-tx-rtune-n: HSIC TX RTUNEN value. (0 - 7)
+- nvidia,hsic-tx-rtune-p: HSIC TX RTUNEP value. (0 - 7)
+- nvidia,hsic-tx-slew-n: HSIC TX SLEWN value. (0 - 7)
+- nvidia,hsic-tx-slew-p: HSIC TX SLEWP value. (0 - 7)
+- nvidia,hsic-auto-term: Enables HSIC AUTO_TERM. (0: no, 1: yes)
+- nvidia,otg-hs-curr-level-offset: Offset to be applied to the pad's fused
+ HS_CURR_LEVEL value. (0 - 63)
Note that not all of these properties are valid for all lanes. Lanes can be
-divided into three groups:
+divided into four groups:
- otg-0, otg-1, otg-2:
Valid functions for this group are: "snps", "xusb", "uart", "rsvd".
- The nvidia,iddq property does not apply to this group.
+ Only the nvidia,otg-hs-curr-level-offset property applies.
+
+ - ulpi-0:
- - ulpi-0, hsic-0, hsic-1:
+ Valid functions for this group are: "snps", "xusb".
+
+ - hsic-0, hsic-1:
Valid functions for this group are: "snps", "xusb".
- The nvidia,iddq property does not apply to this group.
+ Only the nvidia,hsic-* properties apply, and only when the function is
+ xusb.
- pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, sata-0:
Valid functions for this group are: "pcie", "usb3", "sata", "rsvd".
+ Only the nvidia,iddq, nvidia,usb2-port, and nvidia,usb3-port properties
+ apply. The nvidia,usb2-port and nvidia,usb3-port properties are required
+ when the function is usb3.
Example:
========
@@ -82,6 +111,8 @@ SoC file extract:
reg = <0x0 0x7009f000 0x0 0x1000>;
resets = <&tegra_car 142>;
reset-names = "padctl";
+ mboxes = <&xusb_mbox>;
+ mbox-names = "xusb";
#phy-cells = <1>;
};
@@ -100,15 +131,35 @@ Board file extract:
...
+ usb@0,70090000 {
+ ...
+
+ phys = <&padctl 5>, <&padctl 6>, <&padctl 7>;
+ phy-names = "utmi-1", "utmi-2", "usb3-0";
+
+ ...
+ }
+
+ ...
+
padctl: padctl@0,7009f000 {
pinctrl-0 = <&padctl_default>;
pinctrl-names = "default";
+ vbus-2-supply = <&vdd_usb3_vbus>;
+
padctl_default: pinmux {
- usb3 {
- nvidia,lanes = "pcie-0", "pcie-1";
+ otg {
+ nvidia,lanes = "otg-1", "otg-2";
+ nvidia,function = "xusb";
+ };
+
+ usb3p0 {
+ nvidia,lanes = "pcie-0";
nvidia,function = "usb3";
nvidia,iddq = <0>;
+ nvidia,usb2-port = <2>;
+ nvidia,usb3-port = <0>;
};
pcie {
diff --git a/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h b/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h
index 914d56d..c83a4d4 100644
--- a/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h
+++ b/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h
@@ -3,5 +3,12 @@
#define TEGRA_XUSB_PADCTL_PCIE 0
#define TEGRA_XUSB_PADCTL_SATA 1
+#define TEGRA_XUSB_PADCTL_USB3_P0 2
+#define TEGRA_XUSB_PADCTL_USB3_P1 3
+#define TEGRA_XUSB_PADCTL_UTMI_P0 4
+#define TEGRA_XUSB_PADCTL_UTMI_P1 5
+#define TEGRA_XUSB_PADCTL_UTMI_P2 6
+#define TEGRA_XUSB_PADCTL_HSIC_P0 7
+#define TEGRA_XUSB_PADCTL_HSIC_P1 8
#endif /* _DT_BINDINGS_PINCTRL_TEGRA_XUSB_H */
--
2.1.0.rc2.206.gedb03e5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists