[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1416874644-12070-11-git-send-email-abrestic@chromium.org>
Date: Mon, 24 Nov 2014 16:17:22 -0800
From: Andrew Bresticker <abrestic@...omium.org>
To: Stephen Warren <swarren@...dotorg.org>,
Thierry Reding <thierry.reding@...il.com>,
Alexandre Courbot <gnurou@...il.com>,
linux-tegra@...r.kernel.org
Cc: Andrew Bresticker <abrestic@...omium.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Jassi Brar <jassisinghbrar@...il.com>,
Linus Walleij <linus.walleij@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Mathias Nyman <mathias.nyman@...el.com>,
Grant Likely <grant.likely@...aro.org>,
Alan Stern <stern@...land.harvard.edu>,
Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
Kishon Vijay Abraham I <kishon@...com>,
Felipe Balbi <balbi@...com>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-usb@...r.kernel.org
Subject: [PATCH V6 10/12] ARM: tegra: jetson-tk1: Add xHCI support
Assign USB ports previously owned by the EHCI controllers to the xHCI
controller. There is a mini-PCIe USB port (UTMI port 1) and a USB A
connector (UTMI port 2, USB3 port 0). PCIe lane 0 is used for USB3
port 0.
Signed-off-by: Andrew Bresticker <abrestic@...omium.org>
Reviewed-by: Stephen Warren <swarren@...dia.com>
---
No changes from v5.
Changes from v4:
- Updated regulator and pinconfig properties.
Changes from v3:
- Assigned otg-0 to XUSB to avoid USB2.0 flakiness.
Changes from v2:
- Updated VBUS power supply names.
Changes from v1:
- Updated USB power supplies.
---
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 46 +++++++++++++++++--------------
1 file changed, 26 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 51b373f..be93710 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1687,15 +1687,40 @@
target-12v-supply = <&vdd_12v0_sata>;
};
+ usb@0,70090000 {
+ status = "okay";
+ phys = <&padctl TEGRA_XUSB_PADCTL_UTMI_P1>, /* mini-PCIe USB */
+ <&padctl TEGRA_XUSB_PADCTL_UTMI_P2>, /* USB A */
+ <&padctl TEGRA_XUSB_PADCTL_USB3_P0>; /* USB A */
+ phy-names = "utmi-1", "utmi-2", "usb3-0";
+ avddio-pex-supply = <&vdd_1v05_run>;
+ dvddio-pex-supply = <&vdd_1v05_run>;
+ avdd-usb-supply = <&vdd_3v3_lp0>;
+ avdd-pll-utmip-supply = <&vddio_1v8>;
+ avdd-pll-erefe-supply = <&avdd_1v05_run>;
+ avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
+ hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+ hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
+ };
+
padctl@0,7009f000 {
pinctrl-0 = <&padctl_default>;
pinctrl-names = "default";
+ vbus-2-supply = <&vdd_usb3_vbus>;
+
padctl_default: pinmux {
+ otg {
+ nvidia,lanes = "otg-0", "otg-1", "otg-2";
+ nvidia,function = "xusb";
+ };
+
usb3 {
- nvidia,lanes = "pcie-0", "pcie-1";
+ nvidia,lanes = "pcie-0";
nvidia,function = "usb3";
nvidia,iddq = <0>;
+ nvidia,usb2-port = <2>;
+ nvidia,usb3-port = <0>;
};
pcie {
@@ -1736,25 +1761,6 @@
};
};
- /* mini-PCIe USB */
- usb@0,7d004000 {
- status = "okay";
- };
-
- usb-phy@0,7d004000 {
- status = "okay";
- };
-
- /* USB A connector */
- usb@0,7d008000 {
- status = "okay";
- };
-
- usb-phy@0,7d008000 {
- status = "okay";
- vbus-supply = <&vdd_usb3_vbus>;
- };
-
clocks {
compatible = "simple-bus";
#address-cells = <1>;
--
2.1.0.rc2.206.gedb03e5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists