[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1416927292.26128.8.camel@AMDC1943>
Date: Tue, 25 Nov 2014 15:54:52 +0100
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Javier Martinez Canillas <javier.martinez@...labora.co.uk>
Cc: Mike Turquette <mturquette@...aro.org>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Tomasz Figa <tomasz.figa@...il.com>,
Kukjin Kim <kgene@...nel.org>, linux-kernel@...r.kernel.org,
linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Vivek Gautam <gautam.vivek@...sung.com>,
Kevin Hilman <khilman@...nel.org>
Subject: Re: [RFC 0/2] Fix Arndale Octa/Peach Pi boot on Audio subsystem clocks
On wto, 2014-11-25 at 15:52 +0100, Javier Martinez Canillas wrote:
> Hello Krzysztof,
>
> On 11/25/2014 03:22 PM, Krzysztof Kozlowski wrote:
> >> Any ideas?
> >
> > Yes, I got. On Peach board the i2s0 is enabled in DTS. Probing it could
> > fail because it relies on enabling audss clocks (which cannot be
> > accessed).
> >
> > I reproduced another hang on Arndale Octa after enabling i2s0 in DTS.
> > Maybe that is the cause also on Peach.
> >
>
> You are correct, if I disable i2s0 then I see the logs from
> clk_disable_unused_subtree() and boot hangs when accessing the adma clock:
>
> clk: checking dout_fimd1
> clk: checking mout_fimd1_final
> clk: checking mout_fimd1
> clk: checking mout_sclk_rpll
> clk: checking fout_rpll
> clk: checking adma
>
> With i2s0 disabled, your series are indeed enough to make it boot again but
> as you said enabling i2s0 in the DTS makes it hang even with your patches.
>
> Thanks a lot for digging into this!
My patch only fixed the gate clocks but it didn't touched div and mux.
I'll prepare a v2 of it (I got some feedback) which I hope will fix both
cases: i2s and disabling unused clocks.
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists