| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1416930423-12179-3-git-send-email-bgolaszewski@baylibre.com>
Date: Tue, 25 Nov 2014 16:47:00 +0100
From: Bartosz Golaszewski <bgolaszewski@...libre.com>
To: Guenter Roeck <linux@...ck-us.net>
Cc: LKML <linux-kernel@...r.kernel.org>,
Benoit Cousson <bcousson@...libre.com>,
Patrick Titiano <ptitiano@...libre.com>,
Bartosz Golaszewski <bgolaszewski@...libre.com>
Subject: [PATCH 2/5] hwmon: ina2xx: make shunt resistance configurable at run-time
The shunt resistance can only be set via platform_data or device tree. This
isn't suitable for devices in which the shunt resistance can change/isn't
known at boot-time.
Add a sysfs attribute that allows to read and set the shunt resistance.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@...libre.com>
---
drivers/hwmon/ina2xx.c | 58 ++++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 51 insertions(+), 7 deletions(-)
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index 660f8ca..eb66081 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -51,6 +51,8 @@
#define INA226_ALERT_LIMIT 0x07
#define INA226_DIE_ID 0xFF
+/* shunt resistor sysfs attribute index */
+#define INA2XX_RSHUNT 0x8
/* register count */
#define INA219_REGISTERS 6
@@ -65,6 +67,9 @@
/* worst case is 68.10 ms (~14.6Hz, ina219) */
#define INA2XX_CONVERSION_RATE 15
+/* default shunt resistance */
+#define INA2XX_RSHUNT_DEFAULT 10000
+
enum ina2xx_ids { ina219, ina226 };
struct ina2xx_config {
@@ -87,6 +92,8 @@ struct ina2xx_data {
int kind;
u16 regs[INA2XX_MAX_REGISTERS];
+
+ long rshunt;
};
static const struct ina2xx_config ina2xx_config[] = {
@@ -110,6 +117,11 @@ static const struct ina2xx_config ina2xx_config[] = {
},
};
+static u16 ina2xx_calibration_val(const struct ina2xx_data *data)
+{
+ return (u16)(data->config->calibration_factor / data->rshunt);
+}
+
static int ina2xx_write_register(const struct i2c_client *client,
u8 reg, u16 value)
{
@@ -198,6 +210,9 @@ static int ina2xx_get_value(struct ina2xx_data *data, u8 reg)
/* signed register, LSB=1mA (selected), in mA */
val = (s16)data->regs[reg];
break;
+ case INA2XX_RSHUNT:
+ val = data->rshunt;
+ break;
default:
/* programmer goofed */
WARN_ON_ONCE(1);
@@ -221,6 +236,30 @@ static ssize_t ina2xx_show_value(struct device *dev,
ina2xx_get_value(data, attr->index));
}
+static ssize_t ina2xx_set_shunt(struct device *dev,
+ struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct ina2xx_data *data = ina2xx_update_device(dev);
+ long val;
+ s32 status;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ if ((kstrtol(buf, 10, &val) == -EINVAL) || (val <= 0))
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->rshunt = val;
+ status = ina2xx_calibrate(data->client, ina2xx_calibration_val(data));
+ mutex_unlock(&data->update_lock);
+ if (status < 0)
+ return -ENODEV;
+
+ return count;
+}
+
/* shunt voltage */
static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ina2xx_show_value, NULL,
INA2XX_SHUNT_VOLTAGE);
@@ -237,12 +276,17 @@ static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ina2xx_show_value, NULL,
static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ina2xx_show_value, NULL,
INA2XX_POWER);
+/* shunt resistance */
+static SENSOR_DEVICE_ATTR(rshunt, S_IRUGO | S_IWUSR | S_IWGRP,
+ ina2xx_show_value, ina2xx_set_shunt, INA2XX_RSHUNT);
+
/* pointers to created device attributes */
static struct attribute *ina2xx_attrs[] = {
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_curr1_input.dev_attr.attr,
&sensor_dev_attr_power1_input.dev_attr.attr,
+ &sensor_dev_attr_rshunt.dev_attr.attr,
NULL,
};
ATTRIBUTE_GROUPS(ina2xx);
@@ -255,7 +299,6 @@ static int ina2xx_probe(struct i2c_client *client,
struct device *dev = &client->dev;
struct ina2xx_data *data;
struct device *hwmon_dev;
- long shunt = 10000; /* default shunt value 10mOhms */
u32 val;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
@@ -267,13 +310,15 @@ static int ina2xx_probe(struct i2c_client *client,
if (dev_get_platdata(dev)) {
pdata = dev_get_platdata(dev);
- shunt = pdata->shunt_uohms;
+ data->rshunt = pdata->shunt_uohms;
} else if (!of_property_read_u32(dev->of_node,
"shunt-resistor", &val)) {
- shunt = val;
+ data->rshunt = val;
+ } else {
+ data->rshunt = INA2XX_RSHUNT_DEFAULT;
}
- if (shunt <= 0)
+ if (data->rshunt <= 0)
return -ENODEV;
/* set the device type */
@@ -287,8 +332,7 @@ static int ina2xx_probe(struct i2c_client *client,
/* Set current LSB to 1mA, shunt is in uOhms
* (equation 13 in datasheet).
*/
- if (ina2xx_calibrate(client,
- data->config->calibration_factor / shunt) < 0)
+ if (ina2xx_calibrate(client, ina2xx_calibration_val(data)) < 0)
return -ENODEV;
data->client = client;
@@ -300,7 +344,7 @@ static int ina2xx_probe(struct i2c_client *client,
return PTR_ERR(hwmon_dev);
dev_info(dev, "power monitor %s (Rshunt = %li uOhm)\n",
- id->name, shunt);
+ id->name, data->rshunt);
return 0;
}
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists