linux-kernel - Re: [PATCH V2 2/2] arm64: exynos: Add bus1 pinctrl node on exynos7

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGOxZ52XtT-Aq-HJFq7GAzfAq6GEdrzKeez_=fwJR-Z2rkUF+g@mail.gmail.com>
Date:	Wed, 26 Nov 2014 18:59:01 +0530
From:	Alim Akhtar <alim.akhtar@...il.com>
To:	Vivek Gautam <gautam.vivek@...sung.com>
Cc:	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-samsung-soc@...r.kernel.org" 
	<linux-samsung-soc@...r.kernel.org>,
	linux-usb <linux-usb@...r.kernel.org>,
	devicetree@...r.kernel.org, Tomasz Figa <tomasz.figa@...il.com>,
	Sylwester Nawrocki <s.nawrocki@...sung.com>,
	"robh+dt" <robh+dt@...nel.org>,
	Linus Walleij <linus.walleij@...aro.org>, kgene@...nel.org,
	Alim Akhtar <alim.akhtar@...sung.com>
Subject: Re: [PATCH V2 2/2] arm64: exynos: Add bus1 pinctrl node on exynos7

Hi Vivek,

On Mon, Nov 24, 2014 at 6:36 PM, Vivek Gautam <gautam.vivek@...sung.com> wrote:
> BUS1 pinctrl provides gpios for usb and power regulator
> available on exynos7-espresso board. So add relevant device
> node for pinctrl-bus1.
>
> Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@...il.com>
> Signed-off-by: Vivek Gautam <gautam.vivek@...sung.com>
> ---
>
Looks good to me.
Reviewed-by: Alim Akhtar <alim.akhtar@...sung.com>

> This patch was part of series:
> "[PATCH 00/11] Exynos7: Adding USB 3.0 support"
>  https://lkml.org/lkml/2014/11/21/247
>
> Changes since V1:
>  - Added support for all pin banks which are part of BUS1 pin controller.
>
>  arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi |   82 +++++++++++++++++++++++
>  arch/arm64/boot/dts/exynos/exynos7.dtsi         |    7 ++
>  2 files changed, 89 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> index 2eef4a2..c367f0a 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> @@ -335,6 +335,88 @@
>         };
>  };
>
> +&pinctrl_bus1 {
> +       gpf0: gpf0 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpf1: gpf1 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpf2: gpf2 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpf3: gpf3 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpf4: gpf4 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpf5: gpf5 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpg1: gpg1 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpg2: gpg2 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gph1: gph1 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpv6: gpv6 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +};
> +
>  &pinctrl_nfc {
>         gpj0: gpj0 {
>                 gpio-controller;
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index 1d9e4c9..e633b02 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -26,6 +26,7 @@
>                 pinctrl5 = &pinctrl_ese;
>                 pinctrl6 = &pinctrl_fsys0;
>                 pinctrl7 = &pinctrl_fsys1;
> +               pinctrl8 = &pinctrl_bus1;
>         };
>
>         cpus {
> @@ -242,6 +243,12 @@
>                         interrupts = <0 383 0>;
>                 };
>
> +               pinctrl_bus1: pinctrl@...70000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x14870000 0x1000>;
> +                       interrupts = <0 384 0>;
> +               };
> +
>                 pinctrl_nfc: pinctrl@...d0000 {
>                         compatible = "samsung,exynos7-pinctrl";
>                         reg = <0x14cd0000 0x1000>;
> --
> 1.7.10.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
Regards,
Alim
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/