| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 27 Nov 2014 12:20:50 +0100
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Lee Jones <lee.jones@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Cc: linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Kukjin Kim <kgene@...nel.org>,
Kyungmin Park <kyungmin.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>
Subject: [PATCH v4 4/7] regulator: Use ena_gpio supplied with generic regulator
bindings
Use ena_gpio from regulator constraints (filled by parsing generic
bindings) to initialize the GPIO enable control. Support also the old
way: ena_gpio supplied in regulator_config structure.
This also adds a new set_ena_gpio() callback in regulator_ops structure
which driver may provide to actually enable the GPIO control in
hardware.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
---
drivers/regulator/core.c | 96 ++++++++++++++++++++++++++++++----------
include/linux/regulator/driver.h | 5 +++
2 files changed, 78 insertions(+), 23 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index bbf93c9caca3..1760184cd8dc 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -26,6 +26,7 @@
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/regmap.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/consumer.h>
@@ -1044,6 +1045,14 @@ static int set_machine_constraints(struct regulator_dev *rdev,
}
}
+ if (rdev->constraints->use_ena_gpio && ops->set_ena_gpio) {
+ ret = ops->set_ena_gpio(rdev);
+ if (ret < 0) {
+ rdev_err(rdev, "failed to set enable GPIO control\n");
+ goto out;
+ }
+ }
+
print_constraints(rdev);
return 0;
out:
@@ -1660,36 +1669,36 @@ EXPORT_SYMBOL_GPL(regulator_bulk_unregister_supply_alias);
/* Manage enable GPIO list. Same GPIO pin can be shared among regulators */
static int regulator_ena_gpio_request(struct regulator_dev *rdev,
- const struct regulator_config *config)
+ unsigned int gpio,
+ bool gpio_invert,
+ unsigned int gpio_flags)
{
struct regulator_enable_gpio *pin;
struct gpio_desc *gpiod;
int ret;
- gpiod = gpio_to_desc(config->ena_gpio);
+ gpiod = gpio_to_desc(gpio);
list_for_each_entry(pin, ®ulator_ena_gpio_list, list) {
if (pin->gpiod == gpiod) {
- rdev_dbg(rdev, "GPIO %d is already used\n",
- config->ena_gpio);
+ rdev_dbg(rdev, "GPIO %d is already used\n", gpio);
goto update_ena_gpio_to_rdev;
}
}
- ret = gpio_request_one(config->ena_gpio,
- GPIOF_DIR_OUT | config->ena_gpio_flags,
+ ret = gpio_request_one(gpio, GPIOF_DIR_OUT | gpio_flags,
rdev_get_name(rdev));
if (ret)
return ret;
pin = kzalloc(sizeof(struct regulator_enable_gpio), GFP_KERNEL);
if (pin == NULL) {
- gpio_free(config->ena_gpio);
+ gpio_free(gpio);
return -ENOMEM;
}
pin->gpiod = gpiod;
- pin->ena_gpio_invert = config->ena_gpio_invert;
+ pin->ena_gpio_invert = gpio_invert;
list_add(&pin->list, ®ulator_ena_gpio_list);
update_ena_gpio_to_rdev:
@@ -1698,6 +1707,59 @@ update_ena_gpio_to_rdev:
return 0;
}
+/*
+ * Request GPIO for enable control from regulator_config
+ * or init_data->constraints.
+ */
+static int regulator_ena_gpio_setup(struct regulator_dev *rdev,
+ const struct regulator_config *config,
+ const struct regulator_init_data *init_data)
+{
+ unsigned int gpio_flags;
+ bool gpio_invert;
+ int gpio, ret;
+
+ if (config->ena_gpio || config->ena_gpio_initialized) {
+ gpio = config->ena_gpio;
+ gpio_invert = config->ena_gpio_invert;
+ gpio_flags = config->ena_gpio_flags;
+ } else if (init_data && init_data->constraints.use_ena_gpio) {
+ const struct regulation_constraints *c = &init_data->constraints;
+
+ gpio = c->ena_gpio;
+ gpio_invert = false;
+ gpio_flags = GPIOF_OUT_INIT_HIGH;
+
+ if (c->ena_gpio_flags & OF_GPIO_ACTIVE_LOW) {
+ gpio_invert = true;
+ gpio_flags = GPIOF_OUT_INIT_LOW;
+ }
+
+ if (c->ena_gpio_open_drain)
+ gpio_flags |= GPIOF_OPEN_DRAIN;
+ } else {
+ return 0;
+ }
+
+ if (!gpio_is_valid(gpio))
+ return 0;
+
+ ret = regulator_ena_gpio_request(rdev, gpio, gpio_invert, gpio_flags);
+ if (ret != 0) {
+ rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
+ gpio, ret);
+ return ret;
+ }
+
+ if (gpio_flags & GPIOF_OUT_INIT_HIGH)
+ rdev->ena_gpio_state = 1;
+
+ if (gpio_invert)
+ rdev->ena_gpio_state = !rdev->ena_gpio_state;
+
+ return 0;
+}
+
static void regulator_ena_gpio_free(struct regulator_dev *rdev)
{
struct regulator_enable_gpio *pin, *n;
@@ -3650,21 +3712,9 @@ regulator_register(const struct regulator_desc *regulator_desc,
dev_set_drvdata(&rdev->dev, rdev);
- if ((config->ena_gpio || config->ena_gpio_initialized) &&
- gpio_is_valid(config->ena_gpio)) {
- ret = regulator_ena_gpio_request(rdev, config);
- if (ret != 0) {
- rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
- config->ena_gpio, ret);
- goto wash;
- }
-
- if (config->ena_gpio_flags & GPIOF_OUT_INIT_HIGH)
- rdev->ena_gpio_state = 1;
-
- if (config->ena_gpio_invert)
- rdev->ena_gpio_state = !rdev->ena_gpio_state;
- }
+ ret = regulator_ena_gpio_setup(rdev, config, init_data);
+ if (ret != 0)
+ goto wash;
/* set regulator constraints */
if (init_data)
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 28da08e4671f..fe967a0c6ce7 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -118,6 +118,9 @@ struct regulator_linear_range {
* suspended.
* @set_suspend_mode: Set the operating mode for the regulator when the
* system is suspended.
+ * @set_ena_gpio: Turn on GPIO enable control for given regulator. Called
+ * by core during registration of regulator when regulator
+ * was configured for this mode by standard binding.
*
* This struct describes regulator operations which can be implemented by
* regulator chip drivers.
@@ -183,6 +186,8 @@ struct regulator_ops {
/* set regulator suspend operating mode (defined in consumer.h) */
int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
+
+ int (*set_ena_gpio)(struct regulator_dev *);
};
/*
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists