lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 27 Nov 2014 12:15:43 +0000
From:	Mark Rutland <mark.rutland@....com>
To:	Andrew Lunn <andrew@...n.ch>
Cc:	"grant.likely@...aro.org" <grant.likely@...aro.org>,
	Leif Lindholm <leif.lindholm@...aro.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Rob Herring <robh+dt@...nel.org>,
	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>,
	Ian Campbell <ijc@...ian.org>,
	"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>
Subject: Re: [PATCH v2 2/2] of: support passing console options with
 stdout-path

On Wed, Nov 26, 2014 at 09:48:47PM +0000, Andrew Lunn wrote:
> On Wed, Nov 26, 2014 at 09:07:33PM +0000, Grant Likely wrote:
> > On Wed, Nov 26, 2014 at 6:30 PM, Andrew Lunn <andrew@...n.ch> wrote:
> > > On Wed, Nov 26, 2014 at 05:40:40PM +0000, Leif Lindholm wrote:
> > >> Support specifying console options (like with console=ttyXN,<options>)
> > >> by appending them to the stdout-path property after a separating ':'.
> > >>
> > >> Example:
> > >>         stdout-path = "uart0:115200";
> > >
> > > Hi Leif
> > >
> > > This should be documented somewhere under
> > > Documentation/devicetree/bindings/
> > >
> > > Not sure where thought. Maybe a top level chosen.txt?
> > 
> > Actually, this one doesn't. It is already documented in ePAPR
> 
> Hi Grant
> 
> Humm, do i have an old version of ePAPR?
> 
> All i see is that in Table 3-4 It says:
> 
> stdout-path O <string> A string that specifies the full path to the
> 	      	       node representing the device to be used for
> 	      	       boot console output. If the character ":" is
> 	      	       present in the value it terminates the
> 	      	       path. The value may be an alias.
> 
> 		       If the stdin-path property is not specified,
> 		       stdout-path should be assumed to define the input device.
> 
> So what is before the : is defined. What comes afterwards,
> baudrate/parity/bits/flow control does not appear to the defined in
> ePAPR. Should we not document the extension being added here?

I believe that we should, and it should be relatively trivial to add a
document stating that the format and meaning of the parts after the ':'
are device-specific. 

So how about Documentation/devicetree/bindings/serial/stdout-path.txt,
with something like the following:

---->8----
Device trees may specify the device to be used for boot console output
with a stdout-path property under /chosen, as described in ePAPR, e.g.

/ {
	chosen {
		stdout-path = "/serial@f00:115200";
	};

	serial@f00 {
		compatible = "vendor,some-uart";
		reg = <0xf00 0x10>;
	};
};

If the character ":" is present in the value, this terminates the path.
The meaning of any cahracters following the ":" is device-specific, and
must be specified in the relevant binding documentation.
---->8----

The more difficult part is documenting those (and I'm still uneasy about
conflating the Linux driver command line options with the DT binding for
that reason).

Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists