linux-kernel - Re: [PATCH v2 3/4] powernv: cpuidle: Redesign idle states management

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20141127235035.GC12871@iris.ozlabs.ibm.com>
Date:	Fri, 28 Nov 2014 10:50:36 +1100
From:	Paul Mackerras <paulus@...ba.org>
To:	"Shreyas B. Prabhu" <shreyas@...ux.vnet.ibm.com>
Cc:	linux-kernel@...r.kernel.org,
	Benjamin Herrenschmidt <benh@...nel.crashing.org>,
	Michael Ellerman <mpe@...erman.id.au>,
	"Rafael J. Wysocki" <rjw@...ysocki.net>, linux-pm@...r.kernel.org,
	linuxppc-dev@...ts.ozlabs.org
Subject: Re: [PATCH v2 3/4] powernv: cpuidle: Redesign idle states management

On Tue, Nov 25, 2014 at 04:47:58PM +0530, Shreyas B. Prabhu wrote:
[snip]
> +2:
> +	/* Sleep or winkle */
> +	li	r7,1
> +	mfspr	r8,SPRN_PIR
> +	/*
> +	 * The last 3 bits of PIR represents the thread id of a cpu
> +	 * in power8. This will need adjusting for power7.
> +	 */
> +	andi.	r8,r8,0x07			/* Get thread id into r8 */
> +	rotld	r7,r7,r8

I would suggest adding another u8 field to the paca to store our
thread bit, and initialize it to 1 << (cpu_id % threads_per_core)
early on.  That will handle the POWER7 case correctly and reduce these
four instructions to one.

> +
> +	ld	r14,PACA_CORE_IDLE_STATE_PTR(r13)
> +lwarx_loop1:
> +	lwarx	r15,0,r14
> +	andc	r15,r15,r7			/* Clear thread bit */
> +
> +	andi.	r15,r15,PNV_CORE_IDLE_THREAD_BITS
> +	beq	last_thread
> +
> +	/* Not the last thread to goto sleep */
> +	stwcx.	r15,0,r14
> +	bne-	lwarx_loop1
> +	b	common_enter
> +
> +last_thread:
> +	LOAD_REG_ADDR(r3, pnv_need_fastsleep_workaround)
> +	lbz	r3,0(r3)
> +	cmpwi	r3,1
> +	bne	common_enter
> +	/*
> +	 * Last thread of the core entering sleep. Last thread needs to execute
> +	 * the hardware bug workaround code. Before that, set the lock bit to
> +	 * avoid the race of other threads waking up and undoing workaround
> +	 * before workaround is applied.
> +	 */
> +	ori	r15,r15,PNV_CORE_IDLE_LOCK_BIT
> +	stwcx.	r15,0,r14
> +	bne-	lwarx_loop1
> +
> +	/* Fast sleep workaround */
> +	li	r3,1
> +	li	r4,1
> +	li	r0,OPAL_CONFIG_CPU_IDLE_STATE
> +	bl	opal_call_realmode
> +
> +	/* Clear Lock bit */
> +	andi.	r15,r15,PNV_CORE_IDLE_THREAD_BITS
> +	stw	r15,0(r14)

In this case we know the result of the andi. will be 0, so this could
be just li r0,0; stw r0,0(r14).

> +
> +common_enter: /* common code for all the threads entering sleep */
> +	IDLE_STATE_ENTER_SEQ(PPC_SLEEP)
>  
>  _GLOBAL(power7_idle)
>  	/* Now check if user or arch enabled NAP mode */
> @@ -141,49 +191,16 @@ _GLOBAL(power7_idle)
>  
>  _GLOBAL(power7_nap)
>  	mr	r4,r3
> -	li	r3,0
> +	li	r3,PNV_THREAD_NAP
>  	b	power7_powersave_common
>  	/* No return */
>  
>  _GLOBAL(power7_sleep)
> -	li	r3,1
> +	li	r3,PNV_THREAD_SLEEP
>  	li	r4,1
>  	b	power7_powersave_common
>  	/* No return */
>  
> -/*
> - * Make opal call in realmode. This is a generic function to be called
> - * from realmode from reset vector. It handles endianess.
> - *
> - * r13 - paca pointer
> - * r1  - stack pointer
> - * r3  - opal token
> - */
> -opal_call_realmode:
> -	mflr	r12
> -	std	r12,_LINK(r1)
> -	ld	r2,PACATOC(r13)
> -	/* Set opal return address */
> -	LOAD_REG_ADDR(r0,return_from_opal_call)
> -	mtlr	r0
> -	/* Handle endian-ness */
> -	li	r0,MSR_LE
> -	mfmsr	r12
> -	andc	r12,r12,r0
> -	mtspr	SPRN_HSRR1,r12
> -	mr	r0,r3			/* Move opal token to r0 */
> -	LOAD_REG_ADDR(r11,opal)
> -	ld	r12,8(r11)
> -	ld	r2,0(r11)
> -	mtspr	SPRN_HSRR0,r12
> -	hrfid
> -
> -return_from_opal_call:
> -	FIXUP_ENDIAN
> -	ld	r0,_LINK(r1)
> -	mtlr	r0
> -	blr
> -
>  #define CHECK_HMI_INTERRUPT						\
>  	mfspr	r0,SPRN_SRR1;						\
>  BEGIN_FTR_SECTION_NESTED(66);						\
> @@ -196,10 +213,8 @@ ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66);		\
>  	/* Invoke opal call to handle hmi */				\
>  	ld	r2,PACATOC(r13);					\
>  	ld	r1,PACAR1(r13);						\
> -	std	r3,ORIG_GPR3(r1);	/* Save original r3 */		\
> -	li	r3,OPAL_HANDLE_HMI;	/* Pass opal token argument*/	\
> +	li	r0,OPAL_HANDLE_HMI;	/* Pass opal token argument*/	\
>  	bl	opal_call_realmode;					\
> -	ld	r3,ORIG_GPR3(r1);	/* Restore original r3 */	\
>  20:	nop;
>  
>  
> @@ -210,12 +225,91 @@ _GLOBAL(power7_wakeup_tb_loss)
>  BEGIN_FTR_SECTION
>  	CHECK_HMI_INTERRUPT
>  END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
> +
> +	li	r7,1
> +	mfspr	r8,SPRN_PIR
> +	/*
> +	 * The last 3 bits of PIR represents the thread id of a cpu
> +	 * in power8. This will need adjusting for power7.
> +	 */
> +	andi.	r8,r8,0x07		/* Get thread id into r8 */
> +	rotld	r7,r7,r8
> +	/* r7 now has 'thread_id'th bit set */
> +
> +	ld	r14,PACA_CORE_IDLE_STATE_PTR(r13)
> +lwarx_loop2:
> +	lwarx	r15,0,r14
> +	andi.	r9,r15,PNV_CORE_IDLE_LOCK_BIT
> +	/*
> +	 * Lock bit is set in one of the 2 cases-
> +	 * a. In the sleep/winkle enter path, the last thread is executing
> +	 * fastsleep workaround code.
> +	 * b. In the wake up path, another thread is executing fastsleep
> +	 * workaround undo code or resyncing timebase or restoring context
> +	 * In either case loop until the lock bit is cleared.
> +	 */
> +	bne	lwarx_loop2
> +
> +	cmpwi	cr2,r15,0
> +	or	r15,r15,r7		/* Set thread bit */
> +
> +	beq	cr2,first_thread
> +
> +	/* Not first thread in core to wake up */
> +	stwcx.	r15,0,r14
> +	bne-	lwarx_loop2
> +	b	common_exit
> +
> +first_thread:
> +	/* First thread in core to wakeup */
> +	ori	r15,r15,PNV_CORE_IDLE_LOCK_BIT
> +	stwcx.	r15,0,r14
> +	bne-	lwarx_loop2
> +
> +	LOAD_REG_ADDR(r3, pnv_need_fastsleep_workaround)
> +	lbz	r3,0(r3)
> +	cmpwi	r3,1
> +	/*  skip fastsleep workaround if its not needed */
> +	bne	timebase_resync
> +
> +	/* Undo fast sleep workaround */
> +	mfcr	r16	/* Backup CR into a non-volatile register */
> +	li	r3,1
> +	li	r4,0
> +	li	r0,OPAL_CONFIG_CPU_IDLE_STATE
> +	bl	opal_call_realmode
> +	mtcr	r16	/* Restore CR */
> +
> +	/* Do timebase resync if we are waking up from sleep. Use cr1 value
> +	 * set in exceptions-64s.S */
> +	ble	cr1,clear_lock
> +
> +timebase_resync:
>  	/* Time base re-sync */
> -	li	r3,OPAL_RESYNC_TIMEBASE
> +	li	r0,OPAL_RESYNC_TIMEBASE
>  	bl	opal_call_realmode;

So if pnv_need_fastsleep_workaround is zero, we always do the timebase
resync, but if pnv_need_fastsleep_workaround is one, we only do the
timebase resync if we had a loss of state.  Is that really what you
meant?

> -
>  	/* TODO: Check r3 for failure */
>  
> +clear_lock:
> +	andi.	r15,r15,PNV_CORE_IDLE_THREAD_BITS
> +	stw	r15,0(r14)
> +
> +common_exit:
> +	li	r5,PNV_THREAD_RUNNING
> +	stb     r5,PACA_THREAD_IDLE_STATE(r13)
> +
> +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
> +	li      r0,KVM_HWTHREAD_IN_KERNEL
> +	stb     r0,HSTATE_HWTHREAD_STATE(r13)
> +	/* Order setting hwthread_state vs. testing hwthread_req */
> +	sync
> +	lbz     r0,HSTATE_HWTHREAD_REQ(r13)
> +	cmpwi   r0,0
> +	beq     6f
> +	b       kvm_start_guest
> +6:
> +#endif

I'd prefer not to duplicate this code.  Could you instead branch back
to the code in exceptions-64s.S?  Or call this code via a bl and get
back to exceptions-64s.S via a blr.

> +
>  	REST_NVGPRS(r1)
>  	REST_GPR(2, r1)
>  	ld	r3,_CCR(r1)
> diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
> index feb549a..b2aa93b 100644
> --- a/arch/powerpc/platforms/powernv/opal-wrappers.S
> +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
> @@ -158,6 +158,43 @@ opal_tracepoint_return:
>  	blr
>  #endif
>  
> +/*
> + * Make opal call in realmode. This is a generic function to be called
> + * from realmode. It handles endianness.
> + *
> + * r13 - paca pointer
> + * r1  - stack pointer
> + * r0  - opal token
> + */
> +_GLOBAL(opal_call_realmode)
> +	mflr	r12
> +	std	r12,_LINK(r1)

This is a bug waiting to happen.  Using _LINK(r1) was OK in this
code's previous location, since there we know there is a
INT_FRAME_SIZE-sized stack frame and the _LINK field is basically
unused.  Now that you're making this available to call from anywhere,
you can't trash the caller's stack frame like this.  You need to use
PPC_LR_STKOFF(r1) instead.

> +	ld	r2,PACATOC(r13)
> +	/* Set opal return address */
> +	LOAD_REG_ADDR(r12,return_from_opal_call)
> +	mtlr	r12
> +
> +	mfmsr	r12
> +#ifdef __LITTLE_ENDIAN__
> +	/* Handle endian-ness */
> +	li	r11,MSR_LE
> +	andc	r12,r12,r11
> +#endif
> +	mtspr	SPRN_HSRR1,r12
> +	LOAD_REG_ADDR(r11,opal)
> +	ld	r12,8(r11)
> +	ld	r2,0(r11)
> +	mtspr	SPRN_HSRR0,r12
> +	hrfid
> +
> +return_from_opal_call:
> +#ifdef __LITTLE_ENDIAN__
> +	FIXUP_ENDIAN
> +#endif
> +	ld	r12,_LINK(r1)
> +	mtlr	r12
> +	blr

Paul.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/