| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 28 Nov 2014 09:10:24 +0530
From: Vivek Gautam <gautamvivek1987@...il.com>
To: Kukjin Kim <kgene@...nel.org>
Cc: Alim Akhtar <alim.akhtar@...il.com>,
Vivek Gautam <gautam.vivek@...sung.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-samsung-soc@...r.kernel.org"
<linux-samsung-soc@...r.kernel.org>,
linux-usb <linux-usb@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Tomasz Figa <tomasz.figa@...il.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
"robh+dt" <robh+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Alim Akhtar <alim.akhtar@...sung.com>
Subject: Re: [PATCH V2 2/2] arm64: exynos: Add bus1 pinctrl node on exynos7
Hi Kukjin,
On Wed, Nov 26, 2014 at 6:59 PM, Alim Akhtar <alim.akhtar@...il.com> wrote:
> Hi Vivek,
>
> On Mon, Nov 24, 2014 at 6:36 PM, Vivek Gautam <gautam.vivek@...sung.com> wrote:
>> BUS1 pinctrl provides gpios for usb and power regulator
>> available on exynos7-espresso board. So add relevant device
>> node for pinctrl-bus1.
>>
>> Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@...il.com>
>> Signed-off-by: Vivek Gautam <gautam.vivek@...sung.com>
>> ---
We can pick this up for 3.19 rc1 ?
>>
> Looks good to me.
> Reviewed-by: Alim Akhtar <alim.akhtar@...sung.com>
>
>> This patch was part of series:
>> "[PATCH 00/11] Exynos7: Adding USB 3.0 support"
>> https://lkml.org/lkml/2014/11/21/247
>>
>> Changes since V1:
>> - Added support for all pin banks which are part of BUS1 pin controller.
>>
>> arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi | 82 +++++++++++++++++++++++
>> arch/arm64/boot/dts/exynos/exynos7.dtsi | 7 ++
>> 2 files changed, 89 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
>> index 2eef4a2..c367f0a 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
>> +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
>> @@ -335,6 +335,88 @@
>> };
>> };
>>
>> +&pinctrl_bus1 {
>> + gpf0: gpf0 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpf1: gpf1 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpf2: gpf2 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpf3: gpf3 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpf4: gpf4 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpf5: gpf5 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpg1: gpg1 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpg2: gpg2 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gph1: gph1 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpv6: gpv6 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +};
>> +
>> &pinctrl_nfc {
>> gpj0: gpj0 {
>> gpio-controller;
>> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
>> index 1d9e4c9..e633b02 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
>> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
>> @@ -26,6 +26,7 @@
>> pinctrl5 = &pinctrl_ese;
>> pinctrl6 = &pinctrl_fsys0;
>> pinctrl7 = &pinctrl_fsys1;
>> + pinctrl8 = &pinctrl_bus1;
>> };
>>
>> cpus {
>> @@ -242,6 +243,12 @@
>> interrupts = <0 383 0>;
>> };
>>
>> + pinctrl_bus1: pinctrl@...70000 {
>> + compatible = "samsung,exynos7-pinctrl";
>> + reg = <0x14870000 0x1000>;
>> + interrupts = <0 384 0>;
>> + };
>> +
>> pinctrl_nfc: pinctrl@...d0000 {
>> compatible = "samsung,exynos7-pinctrl";
>> reg = <0x14cd0000 0x1000>;
>> --
>> 1.7.10.4
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
>> the body of a message to majordomo@...r.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
> --
> Regards,
> Alim
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists