| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1417423940-1669-5-git-send-email-zyw@rock-chips.com>
Date: Mon, 1 Dec 2014 16:52:20 +0800
From: Chris Zhong <zyw@...k-chips.com>
To: heiko@...ech.de, dianders@...omium.org
Cc: mturquette@...aro.org,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Russell King <linux@....linux.org.uk>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Linus Walleij <linus.walleij@...aro.org>, khilman@...nel.org,
linux-rockchip@...ts.infradead.org,
Chris Zhong <zyw@...k-chips.com>,
Kumar Gala <galak@...eaurora.org>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v10 4/4] ARM: dts: rockchip: add suspend settings for rk3288-evb-rk808
Add suspend-voltages and necessary pin-states for suspend on
rk3288-evb-rk808 boards. global_pwroff would be pulled high when
RK3288 entering suspend, this pin is a sleep signal for RK808, so
RK808 could goto sleep mode, and some regulators would be disable.
Signed-off-by: Chris Zhong <zyw@...k-chips.com>
---
Changes in v10:
- remove regulator-suspend-mem-enabled and regulator-suspend-mem-microvolt
- enable the lcd, codec, sdmmc power during suspend
Changes in v9:
- update the subject and description
Changes in v8:
- keep all except cpu&tp power rail on during suspend
- add regulator-on-in-suspend before set suspend voltage
- add a reference of ddrio_pwroff and ddr0_retention
Changes in v7:
- add regulator-state-mem sub node for suspend
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/rk3288-evb-rk808.dts | 53 +++++++++++++++++++++++++++++++++-
1 file changed, 52 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index d8c775e6..d453ddd 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -31,7 +31,7 @@
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>;
+ pinctrl-0 = <&pmic_int &global_pwroff>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
@@ -50,6 +50,9 @@
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-name = "vdd_arm";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd_gpu: DCDC_REG2 {
@@ -58,12 +61,19 @@
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-name = "vdd_gpu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
vcc_io: DCDC_REG4 {
@@ -72,6 +82,10 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
};
vccio_pmu: LDO_REG1 {
@@ -80,6 +94,10 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
};
vcc_tp: LDO_REG2 {
@@ -88,6 +106,9 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_tp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd_10: LDO_REG3 {
@@ -96,6 +117,10 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
};
vcc18_lcd: LDO_REG4 {
@@ -104,6 +129,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc18_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
};
vccio_sd: LDO_REG5 {
@@ -112,6 +141,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
};
vdd10_lcd: LDO_REG6 {
@@ -120,6 +153,10 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd10_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
};
vcc_18: LDO_REG7 {
@@ -128,6 +165,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_18";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
};
vcca_codec: LDO_REG8 {
@@ -136,18 +177,28 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcca_codec";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
};
vcc_wl: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_wl";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
vcc_lcd: SWITCH_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
};
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists