lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <547CFC82.8060701@suse.de>
Date:	Tue, 02 Dec 2014 00:40:50 +0100
From:	Alexander Graf <agraf@...e.de>
To:	Stuart Yoder <stuart.yoder@...escale.com>,
	Jose Rivera <German.Rivera@...escale.com>,
	"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
	"arnd@...db.de" <arnd@...db.de>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC:	Kim Phillips <Kim.Phillips@...escale.com>,
	Scott Wood <scottwood@...escale.com>,
	"bhamciu1@...escale.com" <bhamciu1@...escale.com>,
	"R89243@...escale.com" <R89243@...escale.com>,
	Geoff Thorpe <Geoff.Thorpe@...escale.com>,
	"bhupesh.sharma@...escale.com" <bhupesh.sharma@...escale.com>,
	"nir.erez@...escale.com" <nir.erez@...escale.com>,
	Richard Schmitt <richard.schmitt@...escale.com>
Subject: Re: [PATCH 1/3 v4] drivers/bus: Added Freescale Management Complex
 APIs



On 01.12.14 23:53, Stuart Yoder wrote:
> 
> 
>> -----Original Message-----
>> From: Alexander Graf [mailto:agraf@...e.de]
>> Sent: Thursday, November 27, 2014 10:14 AM
>> To: Rivera Jose-B46482; gregkh@...uxfoundation.org; arnd@...db.de; linux-kernel@...r.kernel.org
>> Cc: Yoder Stuart-B08248; Phillips Kim-R1AAHA; Wood Scott-B07421; Hamciuc Bogdan-BHAMCIU1; Marginean
>> Alexandru-R89243; Thorpe Geoff-R01361; Sharma Bhupesh-B45370; Erez Nir-RM30794; Schmitt Richard-B43082
>> Subject: Re: [PATCH 1/3 v4] drivers/bus: Added Freescale Management Complex APIs
>>
>>
>>
>> On 13.11.14 18:54, J. German Rivera wrote:
>>> APIs to access the Management Complex (MC) hardware
>>> module of Freescale LS2 SoCs. This patch includes
>>> APIs to check the MC firmware version and to manipulate
>>> DPRC objects in the MC.
>>>
>>> Signed-off-by: J. German Rivera <German.Rivera@...escale.com>
>>> Signed-off-by: Stuart Yoder <stuart.yoder@...escale.com>
>>
>> [...]
>>
>>> +/**
>>> + * Creates an MC I/O object
>>> + *
>>> + * @dev: device to be associated with the MC I/O object
>>> + * @mc_portal_phys_addr: physical address of the MC portal to use
>>> + * @mc_portal_size: size in bytes of the MC portal
>>> + * @flags: flags for the new MC I/O object
>>> + * @new_mc_io: Area to return pointer to newly created MC I/O object
>>> + *
>>> + * Returns '0' on Success; Error code otherwise.
>>> + */
>>> +int __must_check fsl_create_mc_io(struct device *dev,
>>> +				  phys_addr_t mc_portal_phys_addr,
>>> +				  uint32_t mc_portal_size,
>>> +				  uint32_t flags, struct fsl_mc_io **new_mc_io)
>>> +{
>>> +	struct fsl_mc_io *mc_io;
>>> +	void __iomem *mc_portal_virt_addr;
>>> +	struct resource *res;
>>> +
>>> +	mc_io = devm_kzalloc(dev, sizeof(*mc_io), GFP_KERNEL);
>>> +	if (mc_io == NULL)
>>> +		return -ENOMEM;
>>> +
>>> +	mc_io->dev = dev;
>>> +	mc_io->flags = flags;
>>> +	mc_io->portal_phys_addr = mc_portal_phys_addr;
>>> +	mc_io->portal_size = mc_portal_size;
>>> +	res = devm_request_mem_region(dev,
>>> +				      mc_portal_phys_addr,
>>> +				      mc_portal_size,
>>> +				      "mc_portal");
>>> +	if (res == NULL) {
>>> +		dev_err(dev,
>>> +			"devm_request_mem_region failed for MC portal %#llx\n",
>>> +			mc_portal_phys_addr);
>>> +		return -EBUSY;
>>> +	}
>>> +
>>> +	mc_portal_virt_addr = devm_ioremap_nocache(dev,
>>> +						   mc_portal_phys_addr,
>>> +						   mc_portal_size);
>>
>> While I can't complain about the device itself, I will note that I think
>> it's a pretty bad design decision to expose actual host physical
>> addresses in the protocol.
> 
> I tend to agree.  I'll look into creating a proposed change to the architecture
> to have the MC communicate a physical offset of some kind.
> 
>> Basically this means that you won't be able to pass a full MC complex
>> into a guest, even if you could virtualize IRQ and DMA access unless you
>> map it at the exact same location as the host's MC complex.
> 
> Right.  But is that really an issue in practice?

Well, it obviously depends on what you're trying to do. For everything
that's envisioned today I don't think it's a problem, but I like to
stick to the "know as little as you have to know" rule when it comes to
communication protocols.

>> Could we at least add a "ranges" property to the MC device description
>> and check whether the physical addresses we get are within that range -
>> if nothing else, at least as sanity check? Then maybe add some calls in
>> the next version that act on that range rather than actual host physical
>> addresses?
> 
> So you mean something like:
> 
>         fsl_mc: fsl-mc@...000000 {
>                 compatible = "fsl,qoriq-mc";
>                 #stream-id-cells = <2>;
>                 reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
>                       <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
>                 ranges = <0x8 0x0 0x8 0x0 0x20000000>;
>                 lpi-parent = <&its>;
>         };
> 
> The physical addresses returned by the MC fall into a 512MB "portal"
> region at 0x8_0000_0000 in the physical address map.  For now map it 1:1, but in the
> future it could become:
>                    ranges = <0x0 0x0 0x8 0x0 0x20000000>;
> 
> ...if I can get the hardware architecture changed.

Yup, I think that makes things a lot less error prone - you don't
randomly access any pointer the device tells you to access :).


Alex
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ