linux-kernel - [PATCH v4 3/3] hwmon: ina2xx: documentation update for new sysfs attributes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1417611971-10360-4-git-send-email-bgolaszewski@baylibre.com>
Date:	Wed,  3 Dec 2014 14:06:11 +0100
From:	Bartosz Golaszewski <bgolaszewski@...libre.com>
To:	Guenter Roeck <linux@...ck-us.net>
Cc:	LKML <linux-kernel@...r.kernel.org>,
	Benoit Cousson <bcousson@...libre.com>,
	Patrick Titiano <ptitiano@...libre.com>,
	LM Sensors <lm-sensors@...sensors.org>,
	Bartosz Golaszewski <bgolaszewski@...libre.com>
Subject: [PATCH v4 3/3] hwmon: ina2xx: documentation update for new sysfs attributes

Include the rshunt and avg sysfs attributes for ina2xx in the documentation.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@...libre.com>
---
 Documentation/hwmon/ina2xx | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
index 4223c2d..c100c24 100644
--- a/Documentation/hwmon/ina2xx
+++ b/Documentation/hwmon/ina2xx
@@ -44,6 +44,10 @@ The INA226 monitors both a shunt voltage drop and bus supply voltage.
 The INA230 is a high or low side current shunt and power monitor with an I2C
 interface. The INA230 monitors both a shunt voltage drop and bus supply voltage.
 
-The shunt value in micro-ohms can be set via platform data or device tree.
-Please refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
-if the device tree is used.
+The shunt value in micro-ohms can be set via platform data or device tree in
+compile-time or via the shunt_resistor attribute in sysfs in run-time. Please
+refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings if
+the device tree is used.
+
+The averaging rate of INA226 and INA230 can be changed via the avg_rate sysfs
+attribute. The available rates are: 1, 4, 16, 64, 128, 256, 512 and 1024.
-- 
2.1.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/