| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 3 Dec 2014 14:27:19 +0100
From: Jean-Michel Hautbois <jean-michel.hautbois@...alys.com>
To: linux-next@...r.kernel.org,
linux-kernel <linux-kernel@...r.kernel.org>
Cc: Fabio Estevam <fabio.estevam@...escale.com>
Subject: DT parsing : duplicate name error
Hi,
I am using linux-next on a i.MX6 board, and it seems that there is a
regression probably in DT parsing.
Here is the DT I am using :
vbx-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led0-red {
gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led0-green {
gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led1-red {
gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led1-green {
gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
On linux-stable v3.17 it works correctly.
On linux-next I get :
[ 1.566876] ------------[ cut here ]------------
[ 1.566899] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31
sysfs_warn_dup+0x68/0x88()
[ 1.566906] sysfs: cannot create duplicate filename
'/devices/soc0/vbx-leds/leds/(null)'
[ 1.566913] Modules linked in:
[ 1.566924] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
3.18.0-rc6-next-20141126+g0076d1c #1
[ 1.566929] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 1.566935] Backtrace:
[ 1.566957] [<80013bbc>] (dump_backtrace) from [<80013f10>]
(show_stack+0x20/0x24)
[ 1.566975] r6:80c68954 r5:00000000 r4:00000000 r3:00000000
[ 1.566995] [<80013ef0>] (show_stack) from [<8079e498>]
(dump_stack+0x8c/0xa4)
[ 1.567010] [<8079e40c>] (dump_stack) from [<8002ed10>]
(warn_slowpath_common+0x8c/0xc8)
[ 1.567026] r6:8019b544 r5:00000009 r4:be0d1bb0 r3:00000000
[ 1.567037] [<8002ec84>] (warn_slowpath_common) from [<8002ed8c>]
(warn_slowpath_fmt+0x40/0x48)
[ 1.567055] r8:be22f410 r7:bd931ec0 r6:bd930de0 r5:bd934100 r4:80abda98
[ 1.567068] [<8002ed50>] (warn_slowpath_fmt) from [<8019b544>]
(sysfs_warn_dup+0x68/0x88)
[ 1.567078] r3:be03efe4 r2:80abda98
[ 1.567085] r4:be03e000
[ 1.567096] [<8019b4dc>] (sysfs_warn_dup) from [<8019b5f4>]
(sysfs_create_dir_ns+0x90/0xa8)
[ 1.567109] r6:bd930de0 r5:bd89bc08 r4:ffffffef
[ 1.567131] [<8019b564>] (sysfs_create_dir_ns) from [<803284e8>]
(kobject_add_internal+0xb4/0x33c)
[ 1.567144] r6:bd931ec0 r5:00000000 r4:bd89bc08
[ 1.567157] [<80328434>] (kobject_add_internal) from [<80328920>]
(kobject_add+0x54/0x98)
[ 1.567173] r7:00000000 r6:bd931ec0 r5:00000000 r4:bd89bc08
[ 1.567189] [<803288d0>] (kobject_add) from [<80405098>]
(device_add+0xf0/0x564)
[ 1.567198] r3:be22f434 r2:00000000
[ 1.567212] r6:bd89bc00 r5:be22f410 r4:bd89bc08
[ 1.567223] [<80404fa8>] (device_add) from [<804056c8>]
(device_create_groups_vargs+0xb4/0xd0)
[ 1.567244] r10:00000000 r9:00000000 r8:be22f410 r7:bd8eb170
r6:bd89bc08 r5:bd89bc00
[ 1.567250] r4:00000000
[ 1.567262] [<80405614>] (device_create_groups_vargs) from
[<80405784>] (device_create_with_groups+0x30/0x38)
[ 1.567283] r9:80c08d90 r8:00000000 r7:be0d1d84 r6:814d0d98
r5:be22f410 r4:00000000
[ 1.567298] [<80405754>] (device_create_with_groups) from
[<8058c7d4>] (led_classdev_register+0x54/0x198)
[ 1.567304] r4:bd8eb170
[ 1.567316] [<8058c780>] (led_classdev_register) from [<8058d74c>]
(create_gpio_led+0xfc/0x194)
[ 1.567330] r6:be22f410 r5:814c5fe0 r4:bd8eb170
[ 1.567340] [<8058d650>] (create_gpio_led) from [<8058d8c8>]
(gpio_led_probe+0xe4/0x2f8)
[ 1.567360] r8:be22f400 r7:bd8eb010 r6:00000000 r5:be22f410
r4:be7e4e1c r3:00000000
[ 1.567377] [<8058d7e4>] (gpio_led_probe) from [<8040a248>]
(platform_drv_probe+0x54/0xb4)
[ 1.567398] r10:00000000 r9:80c08d90 r8:80c98f58 r7:fffffdfb
r6:80c98f58 r5:be22f410
[ 1.567404] r4:814cd180
[ 1.567418] [<8040a1f4>] (platform_drv_probe) from [<804082d8>]
(driver_probe_device+0x144/0x3a0)
[ 1.567435] r7:00000000 r6:80cbb2c8 r5:be22f410 r4:814cd180
[ 1.567446] [<80408194>] (driver_probe_device) from [<8040862c>]
(__driver_attach+0xa4/0xa8)
[ 1.567467] r10:00000000 r9:80c08d90 r8:80cc3280 r7:00000000
r6:be22f444 r5:80c98f58
[ 1.567473] r4:be22f410
[ 1.567485] [<80408588>] (__driver_attach) from [<80406250>]
(bus_for_each_dev+0x7c/0xb0)
[ 1.567501] r6:80408588 r5:80c98f58 r4:00000000 r3:be216f5c
[ 1.567512] [<804061d4>] (bus_for_each_dev) from [<80407c88>]
(driver_attach+0x28/0x30)
[ 1.567525] r6:80c76ce0 r5:bd8f5600 r4:80c98f58
[ 1.567536] [<80407c60>] (driver_attach) from [<8040787c>]
(bus_add_driver+0x164/0x230)
[ 1.567549] [<80407718>] (bus_add_driver) from [<80408e78>]
(driver_register+0x88/0x108)
[ 1.567566] r7:80be948c r6:bd931b40 r5:80c44620 r4:80c98f58
[ 1.567578] [<80408df0>] (driver_register) from [<8040a168>]
(__platform_driver_register+0x58/0x6c)
[ 1.567588] r5:80c44620 r4:80c44620
[ 1.567605] [<8040a110>] (__platform_driver_register) from
[<80be94a4>] (gpio_led_driver_init+0x18/0x20)
[ 1.567619] [<80be948c>] (gpio_led_driver_init) from [<80008b1c>]
(do_one_initcall+0xb8/0x208)
[ 1.567632] [<80008a64>] (do_one_initcall) from [<80ba0e3c>]
(kernel_init_freeable+0x118/0x1e0)
[ 1.567653] r10:80ba0604 r9:80c08d90 r8:80cc3280 r7:000000ca
r6:80cc3280 r5:00000006
[ 1.567659] r4:80c32270
[ 1.567673] [<80ba0d24>] (kernel_init_freeable) from [<80799b2c>]
(kernel_init+0x18/0xfc)
[ 1.567693] r10:00000000 r9:00000000 r8:00000000 r7:00000000
r6:00000000 r5:80799b14
[ 1.567699] r4:00000000
[ 1.567713] [<80799b14>] (kernel_init) from [<8000fb88>]
(ret_from_fork+0x14/0x2c)
[ 1.567722] r4:00000000 r3:00000000
[ 1.567751] ---[ end trace aa4c820e66f8b9bb ]---
[ 1.567758] ------------[ cut here ]------------
[ 1.567774] WARNING: CPU: 0 PID: 1 at lib/kobject.c:240
kobject_add_internal+0x2b0/0x33c()
[ 1.567780] kobject_add_internal failed for (null) with -EEXIST,
don't try to register things with the same name in the same directory.
[ 1.567787] Modules linked in:
[ 1.567796] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
3.18.0-rc6-next-20141126+g0076d1c #1
[ 1.567801] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 1.567807] Backtrace:
[ 1.567820] [<80013bbc>] (dump_backtrace) from [<80013f10>]
(show_stack+0x20/0x24)
[ 1.567837] r6:80c68954 r5:00000000 r4:00000000 r3:00000000
[ 1.567847] [<80013ef0>] (show_stack) from [<8079e498>]
(dump_stack+0x8c/0xa4)
[ 1.567860] [<8079e40c>] (dump_stack) from [<8002ed10>]
(warn_slowpath_common+0x8c/0xc8)
[ 1.567877] r6:803286e4 r5:00000009 r4:be0d1c00 r3:00000000
[ 1.567887] [<8002ec84>] (warn_slowpath_common) from [<8002ed8c>]
(warn_slowpath_fmt+0x40/0x48)
[ 1.567907] r8:be22f410 r7:bd931ec0 r6:bd931ec0 r5:ffffffef r4:80adefb4
[ 1.567919] [<8002ed50>] (warn_slowpath_fmt) from [<803286e4>]
(kobject_add_internal+0x2b0/0x33c)
[ 1.567928] r3:807e849c r2:80adefb4
[ 1.567935] r4:bd89bc08
[ 1.567947] [<80328434>] (kobject_add_internal) from [<80328920>]
(kobject_add+0x54/0x98)
[ 1.567963] r7:00000000 r6:bd931ec0 r5:00000000 r4:bd89bc08
[ 1.567974] [<803288d0>] (kobject_add) from [<80405098>]
(device_add+0xf0/0x564)
[ 1.567985] r3:be22f434 r2:00000000
[ 1.567997] r6:bd89bc00 r5:be22f410 r4:bd89bc08
[ 1.568008] [<80404fa8>] (device_add) from [<804056c8>]
(device_create_groups_vargs+0xb4/0xd0)
[ 1.568029] r10:00000000 r9:00000000 r8:be22f410 r7:bd8eb170
r6:bd89bc08 r5:bd89bc00
[ 1.568035] r4:00000000
[ 1.568046] [<80405614>] (device_create_groups_vargs) from
[<80405784>] (device_create_with_groups+0x30/0x38)
[ 1.568067] r9:80c08d90 r8:00000000 r7:be0d1d84 r6:814d0d98
r5:be22f410 r4:00000000
[ 1.568078] [<80405754>] (device_create_with_groups) from
[<8058c7d4>] (led_classdev_register+0x54/0x198)
[ 1.568085] r4:bd8eb170
[ 1.568096] [<8058c780>] (led_classdev_register) from [<8058d74c>]
(create_gpio_led+0xfc/0x194)
[ 1.568109] r6:be22f410 r5:814c5fe0 r4:bd8eb170
[ 1.568118] [<8058d650>] (create_gpio_led) from [<8058d8c8>]
(gpio_led_probe+0xe4/0x2f8)
[ 1.568139] r8:be22f400 r7:bd8eb010 r6:00000000 r5:be22f410
r4:be7e4e1c r3:00000000
[ 1.568151] [<8058d7e4>] (gpio_led_probe) from [<8040a248>]
(platform_drv_probe+0x54/0xb4)
[ 1.568172] r10:00000000 r9:80c08d90 r8:80c98f58 r7:fffffdfb
r6:80c98f58 r5:be22f410
[ 1.568236] r4:814cd180
[ 1.568253] [<8040a1f4>] (platform_drv_probe) from [<804082d8>]
(driver_probe_device+0x144/0x3a0)
[ 1.568271] r7:00000000 r6:80cbb2c8 r5:be22f410 r4:814cd180
[ 1.568284] [<80408194>] (driver_probe_device) from [<8040862c>]
(__driver_attach+0xa4/0xa8)
[ 1.568306] r10:00000000 r9:80c08d90 r8:80cc3280 r7:00000000
r6:be22f444 r5:80c98f58
[ 1.568312] r4:be22f410
[ 1.568324] [<80408588>] (__driver_attach) from [<80406250>]
(bus_for_each_dev+0x7c/0xb0)
[ 1.568340] r6:80408588 r5:80c98f58 r4:00000000 r3:be216f5c
[ 1.568351] [<804061d4>] (bus_for_each_dev) from [<80407c88>]
(driver_attach+0x28/0x30)
[ 1.568364] r6:80c76ce0 r5:bd8f5600 r4:80c98f58
[ 1.568375] [<80407c60>] (driver_attach) from [<8040787c>]
(bus_add_driver+0x164/0x230)
[ 1.568386] [<80407718>] (bus_add_driver) from [<80408e78>]
(driver_register+0x88/0x108)
[ 1.568402] r7:80be948c r6:bd931b40 r5:80c44620 r4:80c98f58
[ 1.568415] [<80408df0>] (driver_register) from [<8040a168>]
(__platform_driver_register+0x58/0x6c)
[ 1.568425] r5:80c44620 r4:80c44620
[ 1.568442] [<8040a110>] (__platform_driver_register) from
[<80be94a4>] (gpio_led_driver_init+0x18/0x20)
[ 1.568454] [<80be948c>] (gpio_led_driver_init) from [<80008b1c>]
(do_one_initcall+0xb8/0x208)
[ 1.568466] [<80008a64>] (do_one_initcall) from [<80ba0e3c>]
(kernel_init_freeable+0x118/0x1e0)
[ 1.568487] r10:80ba0604 r9:80c08d90 r8:80cc3280 r7:000000ca
r6:80cc3280 r5:00000006
[ 1.568493] r4:80c32270
[ 1.568505] [<80ba0d24>] (kernel_init_freeable) from [<80799b2c>]
(kernel_init+0x18/0xfc)
[ 1.568526] r10:00000000 r9:00000000 r8:00000000 r7:00000000
r6:00000000 r5:80799b14
[ 1.568532] r4:00000000
[ 1.568544] [<80799b14>] (kernel_init) from [<8000fb88>]
(ret_from_fork+0x14/0x2c)
[ 1.568553] r4:00000000 r3:00000000
[ 1.568558] ---[ end trace aa4c820e66f8b9bc ]---
It seems Fabio (CC'ed here) experiences the same issue with another
device too on i.MX53.
Any idea ?
Thanks,
JM
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists