lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAA7nrtjRX+pkg7NHY_wuHYn534_ddfj5r6EGOM4NKTD2vJW0DQ@mail.gmail.com>
Date:	Thu, 4 Dec 2014 12:32:47 +0530
From:	rajeev kumar <rajeevkumar.linux@...il.com>
To:	Andrew Jackson <Andrew.Jackson@....com>
Cc:	Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.de>,
	"alsa-devel@...a-project.org" <alsa-devel@...a-project.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	Liam Girdwood <lgirdwood@...il.com>,
	Mark Brown <broonie@...nel.org>,
	Liviu Dudau <Liviu.Dudau@....com>
Subject: Re: [PATCH 4/5] ASoC: dwc: Add devicetree support for Designware I2S

On Wed, Dec 3, 2014 at 10:09 PM, Andrew Jackson <Andrew.Jackson@....com> wrote:
> Convert to driver to use either platform_data or device-tree for configuration
> of the device.  When using device-tree, the I2S block's configuration is read
> from the relevant registers: this reduces the amount of information required in
> the device tree.
>
> Signed-off-by: Andrew Jackson <Andrew.Jackson@....com>
> ---
>  .../devicetree/bindings/sound/designware-i2s.txt   |   32 +++
>  sound/soc/dwc/Kconfig                              |    1 +
>  sound/soc/dwc/designware_i2s.c                     |  238 ++++++++++++++++----
>  3 files changed, 222 insertions(+), 49 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/sound/designware-i2s.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt
> new file mode 100644
> index 0000000..cdee591
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/designware-i2s.txt
> @@ -0,0 +1,32 @@
> +DesignWare I2S controller
> +
> +Required properties:
> + - compatible : Must be "snps,designware-i2s"
> + - reg : Must contain I2S core's registers location and length
> + - clocks : Pairs of phandle and specifier referencing the controller's clocks.
> +   The controller expects two clocks, the clock used for the APB interface and
> +   the clock used as the sampling rate reference clock sample.
> + - clock-names : "apb_plck" for the clock to the APB interface, "i2sclk" for the sample
> +   rate reference clock.
> + - dmas: Pairs of phandle and specifier for the DMA channels that are used by
> +   the core. The core expects one or two dma channels, one for transmit and one for
> +   receive.
> + - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
> +
> +For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
> +please check:
> +       * resource-names.txt
> +       * clock/clock-bindings.txt
> +       * dma/dma.txt
> +
> +Example:
> +
> +       soc_i2s: i2s@...90000 {
> +               compatible = "snps,designware-i2s";
> +               reg = <0x0 0x7ff90000 0x0 0x1000>;
> +               clocks = <&scpi_i2sclk 0>, <&soc_refclk100mhz>;
> +               clock-names = "i2sclk", "apb_pclk";
> +               #sound-dai-cells = <0>;
> +               dmas = <&dma0 5>;
> +               dma-names = "tx";
> +       };
> diff --git a/sound/soc/dwc/Kconfig b/sound/soc/dwc/Kconfig
> index e334900..d50e085 100644
> --- a/sound/soc/dwc/Kconfig
> +++ b/sound/soc/dwc/Kconfig
> @@ -1,6 +1,7 @@
>  config SND_DESIGNWARE_I2S
>         tristate "Synopsys I2S Device Driver"
>         depends on CLKDEV_LOOKUP
> +       select SND_SOC_GENERIC_DMAENGINE_PCM
>         help
>          Say Y or M if you want to add support for I2S driver for
>          Synopsys desigwnware I2S device. The device supports upto
> diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
> index c497ada..083779d 100644
> --- a/sound/soc/dwc/designware_i2s.c
> +++ b/sound/soc/dwc/designware_i2s.c
> @@ -22,6 +22,7 @@
>  #include <sound/pcm.h>
>  #include <sound/pcm_params.h>
>  #include <sound/soc.h>
> +#include <sound/dmaengine_pcm.h>
>
>  /* common register for all channel */
>  #define IER            0x000
> @@ -54,19 +55,46 @@
>  #define I2S_COMP_VERSION       0x01F8
>  #define I2S_COMP_TYPE          0x01FC
>
> +/*
> + * Component parameter register fields - define the I2S block's
> + * configuration.
> + */
> +#define        COMP1_TX_WORDSIZE_3(r)  (((r) & GENMASK(27, 25)) >> 25)
> +#define        COMP1_TX_WORDSIZE_2(r)  (((r) & GENMASK(24, 22)) >> 22)
> +#define        COMP1_TX_WORDSIZE_1(r)  (((r) & GENMASK(21, 19)) >> 19)
> +#define        COMP1_TX_WORDSIZE_0(r)  (((r) & GENMASK(18, 16)) >> 16)
> +#define        COMP1_TX_CHANNELS(r)    (((r) & GENMASK(10, 9)) >> 9)
> +#define        COMP1_RX_CHANNELS(r)    (((r) & GENMASK(8, 7)) >> 7)
> +#define        COMP1_RX_ENABLED(r)     (((r) & BIT(6)) >> 6)
> +#define        COMP1_TX_ENABLED(r)     (((r) & BIT(5)) >> 5)
> +#define        COMP1_MODE_EN(r)        (((r) & BIT(4)) >> 4)
> +#define        COMP1_FIFO_DEPTH_GLOBAL(r)      (((r) & GENMASK(3, 2)) >> 2)
> +#define        COMP1_APB_DATA_WIDTH(r) (((r) & GENMASK(1, 0)) >> 0)
> +
> +#define        COMP2_RX_WORDSIZE_3(r)  (((r) & GENMASK(12, 10)) >> 10)
> +#define        COMP2_RX_WORDSIZE_2(r)  (((r) & GENMASK(9, 7)) >> 7)
> +#define        COMP2_RX_WORDSIZE_1(r)  (((r) & GENMASK(5, 3)) >> 3)
> +#define        COMP2_RX_WORDSIZE_0(r)  (((r) & GENMASK(2, 0)) >> 0)
> +
>  #define MAX_CHANNEL_NUM                8
>  #define MIN_CHANNEL_NUM                2
>
> +union snd_dma_data {
> +       struct i2s_dma_data pd;
> +       struct snd_dmaengine_dai_dma_data dt;
> +};
> +
>  struct dw_i2s_dev {
>         void __iomem *i2s_base;
>         struct clk *clk;
>         int active;
>         unsigned int capability;
>         struct device *dev;
> +       bool using_pd;
>
>         /* data related to DMA transfers b/w i2s and DMAC */
> -       struct i2s_dma_data play_dma_data;
> -       struct i2s_dma_data capture_dma_data;
> +       union snd_dma_data play_dma_data;
> +       union snd_dma_data capture_dma_data;
>         struct i2s_clk_config_data config;
>         int (*i2s_clk_cfg)(struct i2s_clk_config_data *config);
>  };
> @@ -153,7 +181,7 @@ static int dw_i2s_startup(struct snd_pcm_substream *substream,
>                 struct snd_soc_dai *cpu_dai)
>  {
>         struct dw_i2s_dev *dev = snd_soc_dai_get_drvdata(cpu_dai);
> -       struct i2s_dma_data *dma_data = NULL;
> +       union snd_dma_data *dma_data = NULL;
>
>         if (!(dev->capability & DWC_I2S_RECORD) &&
>                         (substream->stream == SNDRV_PCM_STREAM_CAPTURE))
> @@ -227,8 +255,7 @@ static int dw_i2s_hw_params(struct snd_pcm_substream *substream,
>
>         i2s_disable_channels(dev, substream->stream);
>
> -       /* Iterate over set of channels - independently controlled.
> -        */
> +       /* Iterate over set of channels - independently controlled. */
>         do {
>                 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
>                         i2s_write_reg(dev->i2s_base, TCR(ch_reg),
> @@ -251,13 +278,18 @@ static int dw_i2s_hw_params(struct snd_pcm_substream *substream,
>
>         config->sample_rate = params_rate(params);
>
> -       if (!dev->i2s_clk_cfg)
> -               return -EINVAL;
> +       if (dev->using_pd) {
> +               ret = dev->i2s_clk_cfg(config);
> +               if (ret < 0) {
> +                       dev_err(dev->dev, "runtime audio clk config fail\n");
> +                       return ret;
> +               }
> +       } else {
> +               u32     bitclk;
>
> -       ret = dev->i2s_clk_cfg(config);
> -       if (ret < 0) {
> -               dev_err(dev->dev, "runtime audio clk config fail\n");
> -               return ret;
> +               /* TODO: Validate sample rate against permissible set */
> +               bitclk = config->sample_rate * config->data_width * 2;
> +               clk_set_rate(dev->clk, bitclk);
>         }
>
>         return 0;
> @@ -331,6 +363,31 @@ static int dw_i2s_resume(struct snd_soc_dai *dai)
>  #define dw_i2s_resume  NULL
>  #endif
>
> +/* Maximum resolution of a channel - not uniformly spaced */
> +static const u32 fifo_width[] = {
> +       12, 16, 20, 24, 32, 0, 0, 0
> +};
> +
> +/* Width of (DMA) bus */
> +static const u32 bus_widths[] = {
> +       DMA_SLAVE_BUSWIDTH_1_BYTE,
> +       DMA_SLAVE_BUSWIDTH_2_BYTES,
> +       DMA_SLAVE_BUSWIDTH_4_BYTES,
> +       DMA_SLAVE_BUSWIDTH_UNDEFINED
> +};
> +
> +/* PCM format to support channel resolution */
> +static const u32 formats[] = {
> +       SNDRV_PCM_FMTBIT_S16_LE,
> +       SNDRV_PCM_FMTBIT_S16_LE,
> +       SNDRV_PCM_FMTBIT_S24_LE,
> +       SNDRV_PCM_FMTBIT_S24_LE,
> +       SNDRV_PCM_FMTBIT_S32_LE,
> +       0,
> +       0,
> +       0
> +};
> +
>  static int dw_i2s_probe(struct platform_device *pdev)
>  {
>         const struct i2s_platform_data *pdata = pdev->dev.platform_data;
> @@ -340,11 +397,6 @@ static int dw_i2s_probe(struct platform_device *pdev)
>         unsigned int cap;
>         struct snd_soc_dai_driver *dw_i2s_dai;
>
> -       if (!pdata) {
> -               dev_err(&pdev->dev, "Invalid platform data\n");
> -               return -EINVAL;
> -       }
> -
>         dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
>         if (!dev) {
>                 dev_warn(&pdev->dev, "kzalloc fail\n");
> @@ -373,47 +425,114 @@ static int dw_i2s_probe(struct platform_device *pdev)
>                 return PTR_ERR(dev->i2s_base);
>         }
>
> -       cap = pdata->cap;
> -       dev->capability = cap;
> -       dev->i2s_clk_cfg = pdata->i2s_clk_cfg;
> +       if (pdata) {
> +               dev->using_pd = true;
> +               cap = pdata->cap;
> +               dev->capability = cap;
> +               dev->i2s_clk_cfg = pdata->i2s_clk_cfg;
> +               if (!dev->i2s_clk_cfg) {
> +                       dev_err(&pdev->dev, "no clock device\n");
> +                       return -ENODEV;
> +               }
>
> -       /* Set DMA slaves info */
> +               /* Set DMA slaves info */
> +
> +               dev->play_dma_data.pd.data = pdata->play_dma_data;
> +               dev->capture_dma_data.pd.data = pdata->capture_dma_data;
> +               dev->play_dma_data.pd.addr = res->start + I2S_TXDMA;
> +               dev->capture_dma_data.pd.addr = res->start + I2S_RXDMA;
> +               dev->play_dma_data.pd.max_burst = 16;
> +               dev->capture_dma_data.pd.max_burst = 16;
> +               dev->play_dma_data.pd.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
> +               dev->capture_dma_data.pd.addr_width =
> +                                               DMA_SLAVE_BUSWIDTH_2_BYTES;
> +               dev->play_dma_data.pd.filter = pdata->filter;
> +               dev->capture_dma_data.pd.filter = pdata->filter;
> +
> +               dev->clk = clk_get(&pdev->dev, NULL);
> +               if (IS_ERR(dev->clk))
> +                       return  PTR_ERR(dev->clk);
> +
> +               if (cap & DWC_I2S_PLAY) {
> +                       dev_dbg(&pdev->dev, " designware: play supported\n");
> +                       dw_i2s_dai->playback.channels_min = MIN_CHANNEL_NUM;
> +                       dw_i2s_dai->playback.channels_max = pdata->channel;
> +                       dw_i2s_dai->playback.formats = pdata->snd_fmts;
> +                       dw_i2s_dai->playback.rates = pdata->snd_rates;
> +               }
>
> -       dev->play_dma_data.data = pdata->play_dma_data;
> -       dev->capture_dma_data.data = pdata->capture_dma_data;
> -       dev->play_dma_data.addr = res->start + I2S_TXDMA;
> -       dev->capture_dma_data.addr = res->start + I2S_RXDMA;
> -       dev->play_dma_data.max_burst = 16;
> -       dev->capture_dma_data.max_burst = 16;
> -       dev->play_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
> -       dev->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
> -       dev->play_dma_data.filter = pdata->filter;
> -       dev->capture_dma_data.filter = pdata->filter;
> +               if (cap & DWC_I2S_RECORD) {
> +                       dev_dbg(&pdev->dev, "designware: record supported\n");
> +                       dw_i2s_dai->capture.channels_min = MIN_CHANNEL_NUM;
> +                       dw_i2s_dai->capture.channels_max = pdata->channel;
> +                       dw_i2s_dai->capture.formats = pdata->snd_fmts;
> +                       dw_i2s_dai->capture.rates = pdata->snd_rates;
> +               }
> +       } else {
> +               /*
> +                * Read component parameter registers to extract
> +                * the I2S block's configuration.
> +                */
> +               u32 comp1 = i2s_read_reg(dev->i2s_base, I2S_COMP_PARAM_1);
> +               u32 comp2 = i2s_read_reg(dev->i2s_base, I2S_COMP_PARAM_2);
> +               u32 bus_width = bus_widths[COMP1_APB_DATA_WIDTH(comp1)];
> +               u32 fifo_depth = 1 << (1 + COMP1_FIFO_DEPTH_GLOBAL(comp1));
> +               u32 max_size;
> +
> +               dev->using_pd = false;
> +
> +               dev->clk = devm_clk_get(&pdev->dev, "i2sclk");
> +               if (IS_ERR(dev->clk))
> +                       return  PTR_ERR(dev->clk);
> +
> +               /*
> +                * Code presumes all channels are configured with the same
> +                * word size.
> +                */
> +               if (COMP1_TX_ENABLED(comp1)) {
> +                       dev_dbg(&pdev->dev, "playback capable\n");
> +
> +                       dev->capability |= DWC_I2S_PLAY;
> +                       max_size = COMP1_TX_WORDSIZE_0(comp1);
> +                       dev->play_dma_data.dt.addr = res->start + I2S_TXDMA;
> +                       dev->play_dma_data.dt.addr_width = bus_width;
> +                       dev->play_dma_data.dt.chan_name = "TX";
> +                       dev->play_dma_data.dt.fifo_size = fifo_depth *
> +                               (fifo_width[max_size]) >> 8;
> +                       dev->play_dma_data.dt.maxburst = 16;
> +                       dw_i2s_dai->playback.channels_min = MIN_CHANNEL_NUM;
> +                       dw_i2s_dai->playback.channels_max =
> +                                       1 << (COMP1_TX_CHANNELS(comp1) + 1);
> +                       dw_i2s_dai->playback.formats = formats[max_size];
> +                       dw_i2s_dai->playback.rates = SNDRV_PCM_RATE_8000_192000;
> +               }
> +               if (COMP1_RX_ENABLED(comp1)) {
> +                       dev_dbg(&pdev->dev, "record capable\n");
> +
> +                       dev->capability |= DWC_I2S_RECORD;
> +                       max_size = COMP2_RX_WORDSIZE_0(comp2);
> +                       dev->capture_dma_data.dt.addr = res->start + I2S_RXDMA;
> +                       dev->capture_dma_data.dt.addr_width = bus_width;
> +                       dev->capture_dma_data.dt.chan_name = "RX";
> +                       dev->capture_dma_data.dt.fifo_size = fifo_depth *
> +                               (fifo_width[max_size] >> 8);
> +                       dev->capture_dma_data.dt.maxburst = 16;
> +                       dw_i2s_dai->capture.channels_min = MIN_CHANNEL_NUM;
> +                       dw_i2s_dai->capture.channels_max =
> +                                       1 << (COMP1_RX_CHANNELS(comp1) + 1);
> +                       dw_i2s_dai->capture.formats = formats[max_size];
> +                       dw_i2s_dai->capture.rates = SNDRV_PCM_RATE_8000_192000;
> +               }
> +       }
>
> -       dev->clk = clk_get(&pdev->dev, NULL);
> -       if (IS_ERR(dev->clk))
> -               return  PTR_ERR(dev->clk);
> +       ret = clk_prepare(dev->clk);
> +       if (ret < 0)
> +               goto err_clk_put;
>
>         ret = clk_enable(dev->clk);
>         if (ret < 0)
>                 goto err_clk_put;
>
> -       if (cap & DWC_I2S_PLAY) {
> -               dev_dbg(&pdev->dev, " designware: play supported\n");
> -               dw_i2s_dai->playback.channels_min = MIN_CHANNEL_NUM;
> -               dw_i2s_dai->playback.channels_max = pdata->channel;
> -               dw_i2s_dai->playback.formats = pdata->snd_fmts;
> -               dw_i2s_dai->playback.rates = pdata->snd_rates;
> -       }
> -
> -       if (cap & DWC_I2S_RECORD) {
> -               dev_dbg(&pdev->dev, "designware: record supported\n");
> -               dw_i2s_dai->capture.channels_min = MIN_CHANNEL_NUM;
> -               dw_i2s_dai->capture.channels_max = pdata->channel;
> -               dw_i2s_dai->capture.formats = pdata->snd_fmts;
> -               dw_i2s_dai->capture.rates = pdata->snd_rates;
> -       }
> -
>         dev->dev = &pdev->dev;
>         dev_set_drvdata(&pdev->dev, dev);
>         ret = snd_soc_register_component(&pdev->dev, &dw_i2s_component,
> @@ -423,6 +542,15 @@ static int dw_i2s_probe(struct platform_device *pdev)
>                 goto err_clk_disable;
>         }
>
> +       if (!dev->using_pd) {
> +               ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
> +               if (ret) {
> +                       dev_err(&pdev->dev,
> +                               "Could not register PCM: %d\n", ret);
> +                       return ret;
> +               }
> +       }
> +
>         return 0;
>
>  err_clk_disable:
> @@ -443,12 +571,24 @@ static int dw_i2s_remove(struct platform_device *pdev)
>         return 0;
>  }
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id dw_i2s_of_match[] = {
> +       { .compatible = "snps,designware-i2s",   },
> +       {},
> +};
> +
> +MODULE_DEVICE_TABLE(of, dw_i2s_of_match);
> +#endif
> +
>  static struct platform_driver dw_i2s_driver = {
>         .probe          = dw_i2s_probe,
>         .remove         = dw_i2s_remove,
>         .driver         = {
>                 .name   = "designware-i2s",
>                 .owner  = THIS_MODULE,
> +#ifdef CONFIG_OF
> +               .of_match_table = dw_i2s_of_match,
> +#endif
>         },
>  };
>
> --
> 1.7.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ