[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5480390E.5050408@atmel.com>
Date: Thu, 4 Dec 2014 11:35:58 +0100
From: Nicolas Ferre <nicolas.ferre@...el.com>
To: Boris Brezillon <boris.brezillon@...e-electrons.com>,
"Jean-Christophe Plagniol-Villard" <plagnioj@...osoft.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Andrew Victor <linux@...im.org.za>
CC: Samuel Ortiz <sameo@...ux.intel.com>,
Lee Jones <lee.jones@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
"Mark Rutland" <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, "Arnd Bergmann" <arnd@...db.de>,
Jean-Jacques Hiblot <jjhiblot@...phandler.com>
Subject: Re: [PATCH v5 00/11] memory: add Atmel EBI (External Bus Interface)
driver
Le 03/12/2014 21:44, Boris Brezillon a écrit :
> The EBI (External Bus Interface) is used to access external peripherals
> (NOR, SRAM, NAND, and other specific devices like ethernet controllers).
> Each device is assigned a CS line and an address range and can have its
> own configuration (timings, access mode, bus width, ...).
> This driver provides a generic DT binding to configure a device according
> to its requirements.
> For specific device controllers (like the NAND one) the SMC timings
> should be configured by the controller driver through the matrix and
> smc syscon regmaps.
>
> The first 4 patches introduce 2 syscon devices needed to configure the
> EBI bus, patch 5 and 6 adds support for the EBI bus, and the remaining
> patches declares the EBI related nodes in sama5d3 dts[i] files.
>
> Changes since v4:
> - fix inconsistencies in SMC and MATRIX registers definition
> - add missing compatible strings for at91sam9rl SoC
> - fix DT bindings documentation
> - replace "atmel,generic-dev" property by "atmel,specialized-logic"
>
> Changes since v3:
> - added AT91_MATRIX_USBPUCR_PUON definition
> - removed useless macros (those directly returning SoC specific register
> offsets)
> - use syscon_regmap_lookup_by_phandle instead of of_parse_phandle +
> syscon_node_to_regmap
> - drop AT91_EBICSA_REGFIELD and AT91_MULTI_EBICSA_REGFIELD macros
>
> Changes since v2:
> - minor fixes int DT bindings doc
> - fix SMC macros
> - make use of SMC macros defined in include/linux/mfd/syscon/atmel-smc.h
>
> Changes since v1:
> - almost everything :-)
>
> Boris Brezillon (11):
> mfd: syscon: Add atmel-matrix registers definition
> mfd: syscon: Add Atmel Matrix bus DT binding documentation
> mfd: syscon: Add atmel-smc registers definition
> mfd: syscon: Add Atmel SMC binding doc
> memory: add Atmel EBI (External Bus Interface) driver
> memory: atmel-ebi: add DT bindings documentation
> ARM: at91: select ATMEL_EBI when compiling a kernel for at91sam9 or
> sama5d3
> ARM: at91/dt: add HSMC (Static Memory Controller) node in sama5d3 dtsi
> ARM: at91/dt: add matrix node in sama5d3 dtsi
> ARM: at91/dt: add EBI (External Bus Interface) node in sama5d3 dtsi
> ARM: at91/dt: add NOR definition in sama5d3xcm dtsi
The whole series seems okay.
If you reorder the content of the patches as noted, you can add my:
Acked-by: Nicolas Ferre <nicolas.ferre@...el.com>
Thanks bye.
> .../bindings/memory-controllers/atmel-ebi.txt | 155 ++++++
> .../devicetree/bindings/mfd/atmel-matrix.txt | 24 +
> .../devicetree/bindings/mfd/atmel-smc.txt | 19 +
> arch/arm/boot/dts/sama5d3.dtsi | 93 ++++
> arch/arm/boot/dts/sama5d3xcm.dtsi | 33 ++
> arch/arm/mach-at91/Kconfig | 2 +
> drivers/memory/Kconfig | 11 +
> drivers/memory/Makefile | 1 +
> drivers/memory/atmel-ebi.c | 579 +++++++++++++++++++++
> include/linux/mfd/syscon/atmel-matrix.h | 117 +++++
> include/linux/mfd/syscon/atmel-smc.h | 173 ++++++
> 11 files changed, 1207 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/atmel-ebi.txt
> create mode 100644 Documentation/devicetree/bindings/mfd/atmel-matrix.txt
> create mode 100644 Documentation/devicetree/bindings/mfd/atmel-smc.txt
> create mode 100644 drivers/memory/atmel-ebi.c
> create mode 100644 include/linux/mfd/syscon/atmel-matrix.h
> create mode 100644 include/linux/mfd/syscon/atmel-smc.h
>
--
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists