| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 4 Dec 2014 15:00:15 +0200
From: Teodora Baluta <teodora.baluta@...el.com>
To: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Teodora Baluta <teodora.baluta@...el.com>
Subject: [RFC PATCH 1/3] iio: core: add support for fingerprint devices
This patch introduces the IIO_FINGERPRINT channel which exposes fingerprint sensor
information needed by consumer, attributes for a fingerprint device and
a modifier for the IIO_FINGERPRINT channel. We detail these below.
In order to have a uniform interface, we add the following attributes:
height, width, bit depth, color scheme, orientation, resolution, sensitivity
threshold. These provide information about the image a scanner type device
like a fingerprint sensor produces. Depending on the device, some of these
could be adjusted. For example, setting a lower resolution or a higher
sensitivity threshold.
The sensitivity threshold controls the sensitivy of the finger detection
process. The SW6888[0] sensor and the MBF200[1] sensor have this option.
Add a modifier that enables us to communicate a status code after each scan.
The status codes for a fingerprint device are added in the types.h file.
Devices that are able to send out these status codes are UPEK Eikon 2 and
Validity VFS101 (see [2]). Thus, we have two channels: a modified one
representing the status code and the actual scanned fingerprint data channel.
This patch adds ABI documentation for the attributes a fingerprint
device would have. These attributes describe the image such a sensor
produces. Also, add ABI documentation for the fingerprint channel and
fingerprint status modified channel.
[0] http://ww1.microchip.com/downloads/cn/DeviceDoc/sw6888.pdf
[1]
http://pdf.datasheetcatalog.com/datasheet/FujitsuMicroelectronics/mXsxyvq.pdf
[2]
http://cgit.freedesktop.org/libfprint/libfprint/tree/libfprint/drivers
Signed-off-by: Teodora Baluta <teodora.baluta@...el.com>
---
Documentation/ABI/testing/sysfs-bus-iio | 51 +++++++++++++++++++++++++++++++++
drivers/iio/industrialio-core.c | 9 ++++++
include/linux/iio/iio.h | 7 +++++
include/linux/iio/types.h | 10 +++++++
4 files changed, 77 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 4a9e29a..74d0eed 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -1125,3 +1125,54 @@ Contact: linux-iio@...r.kernel.org
Description:
This attribute is used to read the number of steps taken by the user
since the last reboot while activated.
+
+What: /sys/bus/iio/devices/iio:deviceX/scan_elements/in_fingerprint_en
+KernelVersion: 3.19
+Contact: linux-iio@...r.kernel.org
+Description:
+ Activates the fingerprint channel. By activating the channel,
+ the scanned fingerprint can be read from the character device
+ /dev/iio:deviceX.
+
+What: /sys/bus/iio/devices/iio:deviceX/scan_elements/in_fingerprint_status_en
+KernelVersion: 3.19
+Contact: linux-iio@...r.kernel.org
+Description:
+ Activates the fingerprint status modified channel. After
+ activation, a status code representing the scan feedback from
+ the device can be read from the character device
+ /dev/iio:deviceX.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_fingerprint_scan_height
+What: /sys/bus/iio/devices/iio:deviceX/in_fingerprint_scan_width
+What: /sys/bus/iio/devices/iio:deviceX/in_fingerprint_scan_bit_depth
+What: /sys/bus/iio/devices/iio:deviceX/in_fingerprint_scan_colorscheme
+What: /sys/bus/iio/devices/iio:deviceX/in_fingerprint_scan_orientation
+What: /sys/bus/iio/devices/iio:deviceX/in_fingerprint_scan_resolution
+What: /sys/bus/iio/devices/iio:deviceX/in_fingerprint_sensitivity_threshold
+KernelVersion: 3.19
+Contact: linux-iio@...r.kernel.org
+Description:
+ Attributes that describe the output of a fingerprint device.
+ These values are device dependent and should be provided to the
+ upper layer for processing the image.
+
+ The height * width * bit_depth represents the total amount of
+ data the fingerprint channel stores and makes available in the
+ corresponding character device. Here height and width are
+ represented in pixels.
+
+ The colorscheme represents whether the image is black-on-white
+ or white-on-black. We associate the black-on-white with 0 and
+ white-on-black with 1. Similarly, we use 0 for a horizontal
+ orientation and 1 for a vertical orientation.
+
+ The scan_resolution (in ppmm) is a useful metric for processing
+ the fingerprint. The sensor usually has a set resolution, but as
+ with any other scanners this attribute could also be used as a
+ quality setting.
+
+ Lastly, a sensitivity threshold is a way of adjusting
+ sensitivity in the finger detection/scanning.
+ The userspace application should be able to set this value if
+ the device has this capability.
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 45bb3a4..f54d22b 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -72,6 +72,7 @@ static const char * const iio_chan_type_name_spec[] = {
[IIO_HUMIDITYRELATIVE] = "humidityrelative",
[IIO_ACTIVITY] = "activity",
[IIO_STEPS] = "steps",
+ [IIO_FINGERPRINT] = "fingerprint",
};
static const char * const iio_modifier_names[] = {
@@ -97,6 +98,7 @@ static const char * const iio_modifier_names[] = {
[IIO_MOD_JOGGING] = "jogging",
[IIO_MOD_WALKING] = "walking",
[IIO_MOD_STILL] = "still",
+ [IIO_MOD_STATUS] = "status",
};
/* relies on pairs of these shared then separate */
@@ -121,6 +123,13 @@ static const char * const iio_chan_info_postfix[] = {
[IIO_CHAN_INFO_INT_TIME] = "integration_time",
[IIO_CHAN_INFO_ENABLE] = "en",
[IIO_CHAN_INFO_CALIBHEIGHT] = "calibheight",
+ [IIO_CHAN_INFO_SCAN_HEIGHT] = "scan_height",
+ [IIO_CHAN_INFO_SCAN_WIDTH] = "scan_width",
+ [IIO_CHAN_INFO_SCAN_BIT_DEPTH] = "scan_bit_depth",
+ [IIO_CHAN_INFO_SCAN_COLOR_SCHEME] = "scan_color_scheme",
+ [IIO_CHAN_INFO_SCAN_ORIENTATION] = "scan_orientation",
+ [IIO_CHAN_INFO_SCAN_RESOLUTION] = "scan_resolution",
+ [IIO_CHAN_INFO_SENSITIVITY_THRESHOLD] = "sensitivity_threshold",
};
/**
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index 878d861..e280cfe 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -40,6 +40,13 @@ enum iio_chan_info_enum {
IIO_CHAN_INFO_INT_TIME,
IIO_CHAN_INFO_ENABLE,
IIO_CHAN_INFO_CALIBHEIGHT,
+ IIO_CHAN_INFO_SCAN_HEIGHT,
+ IIO_CHAN_INFO_SCAN_WIDTH,
+ IIO_CHAN_INFO_SCAN_BIT_DEPTH,
+ IIO_CHAN_INFO_SCAN_COLOR_SCHEME,
+ IIO_CHAN_INFO_SCAN_ORIENTATION,
+ IIO_CHAN_INFO_SCAN_RESOLUTION,
+ IIO_CHAN_INFO_SENSITIVITY_THRESHOLD,
};
enum iio_shared_by {
diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
index 904dcbb..d0c7cc9 100644
--- a/include/linux/iio/types.h
+++ b/include/linux/iio/types.h
@@ -32,6 +32,7 @@ enum iio_chan_type {
IIO_HUMIDITYRELATIVE,
IIO_ACTIVITY,
IIO_STEPS,
+ IIO_FINGERPRINT,
};
enum iio_modifier {
@@ -66,6 +67,7 @@ enum iio_modifier {
IIO_MOD_JOGGING,
IIO_MOD_WALKING,
IIO_MOD_STILL,
+ IIO_MOD_STATUS,
};
enum iio_event_type {
@@ -91,6 +93,14 @@ enum iio_event_direction {
IIO_EV_DIR_NONE,
};
+#define STATUS_UNKNOWN 255
+
+#define STATUS_FINGERPRINT_GOOD 0
+#define STATUS_FINGERPRINT_FAIL 1
+#define STATUS_FINGERPRINT_TOO_SLOW 2
+#define STATUS_FINGERPRINT_TOO_FAST 3
+#define STATUS_FINGERPRINT_CENTER_FINGER 4
+
#define IIO_VAL_INT 1
#define IIO_VAL_INT_PLUS_MICRO 2
#define IIO_VAL_INT_PLUS_NANO 3
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists