[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1417726922-10376-3-git-send-email-bparrot@ti.com>
Date: Thu, 4 Dec 2014 15:02:02 -0600
From: Benoit Parrot <bparrot@...com>
To: <linus.walleij@...aro.org>
CC: <linux-gpio@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>, Alexandre Courbot <gnurou@...il.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Jiri Prchal <jiri.prchal@...ignal.cz>,
Pantelis Antoniou <panto@...oniou-consulting.com>,
Benoit Parrot <bparrot@...com>
Subject: [Patch v3 2/2] gpio: Document GPIO hogging mechanism
Add GPIO hogging documentation to gpio.txt
Signed-off-by: Benoit Parrot <bparrot@...com>
---
Changes since v2:
* Updated to the latest hog syntax.
Changes since v1:
* Split the devicetree bindings documentation in its own patch.
Documentation/devicetree/bindings/gpio/gpio.txt | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index 3fb8f53..6d88133 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -103,6 +103,22 @@ Every GPIO controller node must contain both an empty "gpio-controller"
property, and a #gpio-cells integer property, which indicates the number of
cells in a gpio-specifier.
+The GPIO chip may contain GPIO hog definitions. GPIO hogging is a mechanism
+providing automatic GPIO request and configuration as part of the
+gpio-controller's driver probe function.
+
+Each GPIO hog definition is represented as a child node of the GPIO controller.
+Required properties:
+- gpio-hog: A property specifying that this child node represent a gpio-hog.
+- gpios: Store the gpio information (id, flags, ...). Shall contain the
+ number of cells specified in its parent node (GPIO controller
+ node).
+- direction: A property specifying the direction/value needed. This property
+ can take the folowing values: input, output-high, output-low.
+
+Optional properties:
+- line-name: The GPIO label name. If not present the node name is used.
+
Example of two SOC GPIO banks defined as gpio-controller nodes:
qe_pio_a: gpio-controller@...0 {
@@ -110,6 +126,13 @@ Example of two SOC GPIO banks defined as gpio-controller nodes:
reg = <0x1400 0x18>;
gpio-controller;
#gpio-cells = <2>;
+
+ line_b {
+ gpio-hog;
+ gpios = <6 0>;
+ direction = "output-low";
+ line-name = "foo-bar-gpio";
+ };
};
qe_pio_e: gpio-controller@...0 {
--
1.8.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists