| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1417813843-7589-1-git-send-email-marius.gorski@gmail.com>
Date: Fri, 5 Dec 2014 22:10:43 +0100
From: Mariusz Gorski <marius.gorski@...il.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Willy Tarreau <w@....eu>
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Subject: [PATCH] staging: panel: Remove magic numbers in LCD commands
Get rid of magic numbers in LCD commands and replace them with defined
values, so that it's more obvious that the commands are doing.
Signed-off-by: Mariusz Gorski <marius.gorski@...il.com>
---
drivers/staging/panel/panel.c | 83 +++++++++++++++++++++++++++++--------------
1 file changed, 57 insertions(+), 26 deletions(-)
diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c
index b68a9c3..fbba46f 100644
--- a/drivers/staging/panel/panel.c
+++ b/drivers/staging/panel/panel.c
@@ -130,6 +130,28 @@
#define LCD_FLAG_N 0x0040 /* 2-rows mode */
#define LCD_FLAG_L 0x0080 /* backlight enabled */
+/* LCD commands */
+#define LCD_CMD_DISPLAY_CLEAR 0x01 /* Clear entire display */
+
+#define LCD_CMD_ENTRY_MODE 0x04 /* Set entry mode */
+#define LCD_CMD_CURSOR_INC 0x02 /* Increment cursor */
+
+#define LCD_CMD_DISPLAY_CTRL 0x08 /* Display control */
+#define LCD_CMD_DISPLAY_ON 0x04 /* Set display on */
+#define LCD_CMD_CURSOR_ON 0x02 /* Set cursor on */
+#define LCD_CMD_BLINK_ON 0x01 /* Set blink on */
+
+#define LCD_CMD_SHIFT 0x10 /* Shift cursor/display */
+#define LCD_CMD_DISPLAY_SHIFT 0x08 /* Shift display instead of cursor */
+#define LCD_CMD_SHIFT_RIGHT 0x04 /* Shift display/cursor to the right */
+
+#define LCD_CMD_FUNCTION_SET 0x20 /* Set function */
+#define LCD_CMD_DATA_LEN_8BITS 0x10 /* Set data length to 8 bits */
+
+#define LCD_CMD_SET_CGRAM_ADDR 0x40 /* Set char generator RAM address */
+
+#define LCD_CMD_SET_DDRAM_ADDR 0x80 /* Set display data RAM address */
+
#define LCD_ESCAPE_LEN 24 /* max chars for LCD escape command */
#define LCD_ESCAPE_CHAR 27 /* use char 27 for escape command */
@@ -883,7 +905,7 @@ static void lcd_write_data_tilcd(int data)
static void lcd_gotoxy(void)
{
- lcd_write_cmd(0x80 /* set DDRAM address */
+ lcd_write_cmd(LCD_CMD_SET_DDRAM_ADDR
| (lcd.addr.y ? lcd.hwidth : 0)
/* we force the cursor to stay at the end of the
line if it wants to go farther */
@@ -991,7 +1013,7 @@ static void lcd_clear_fast_tilcd(void)
/* clears the display and resets X/Y */
static void lcd_clear_display(void)
{
- lcd_write_cmd(0x01); /* clear display */
+ lcd_write_cmd(LCD_CMD_DISPLAY_CLEAR);
lcd.addr.x = 0;
lcd.addr.y = 0;
/* we must wait a few milliseconds (15) */
@@ -1005,26 +1027,29 @@ static void lcd_init_display(void)
long_sleep(20); /* wait 20 ms after power-up for the paranoid */
- lcd_write_cmd(0x30); /* 8bits, 1 line, small fonts */
+ /* 8bits, 1 line, small fonts; let's do it 3 times */
+ lcd_write_cmd(LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS);
long_sleep(10);
- lcd_write_cmd(0x30); /* 8bits, 1 line, small fonts */
+ lcd_write_cmd(LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS);
long_sleep(10);
- lcd_write_cmd(0x30); /* 8bits, 1 line, small fonts */
+ lcd_write_cmd(LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS);
long_sleep(10);
- lcd_write_cmd(0x30 /* set font height and lines number */
+ /* set font height and lines number */
+ lcd_write_cmd(LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS
| ((lcd.flags & LCD_FLAG_F) ? 4 : 0)
| ((lcd.flags & LCD_FLAG_N) ? 8 : 0)
);
long_sleep(10);
- lcd_write_cmd(0x08); /* display off, cursor off, blink off */
+ /* display off, cursor off, blink off */
+ lcd_write_cmd(LCD_CMD_DISPLAY_CTRL);
long_sleep(10);
- lcd_write_cmd(0x08 /* set display mode */
- | ((lcd.flags & LCD_FLAG_D) ? 4 : 0)
- | ((lcd.flags & LCD_FLAG_C) ? 2 : 0)
- | ((lcd.flags & LCD_FLAG_B) ? 1 : 0)
+ lcd_write_cmd(LCD_CMD_DISPLAY_CTRL /* set display mode */
+ | ((lcd.flags & LCD_FLAG_D) ? LCD_CMD_DISPLAY_ON : 0)
+ | ((lcd.flags & LCD_FLAG_C) ? LCD_CMD_CURSOR_ON : 0)
+ | ((lcd.flags & LCD_FLAG_B) ? LCD_CMD_BLINK_ON : 0)
);
lcd_backlight((lcd.flags & LCD_FLAG_L) ? 1 : 0);
@@ -1032,7 +1057,7 @@ static void lcd_init_display(void)
long_sleep(10);
/* entry mode set : increment, cursor shifting */
- lcd_write_cmd(0x06);
+ lcd_write_cmd(LCD_CMD_ENTRY_MODE | LCD_CMD_CURSOR_INC);
lcd_clear_display();
}
@@ -1116,7 +1141,7 @@ static inline int handle_lcd_special_code(void)
if (lcd.addr.x > 0) {
/* back one char if not at end of line */
if (lcd.addr.x < lcd.bwidth)
- lcd_write_cmd(0x10);
+ lcd_write_cmd(LCD_CMD_SHIFT);
lcd.addr.x--;
}
processed = 1;
@@ -1124,19 +1149,20 @@ static inline int handle_lcd_special_code(void)
case 'r': /* shift cursor right */
if (lcd.addr.x < lcd.width) {
/* allow the cursor to pass the end of the line */
- if (lcd.addr.x <
- (lcd.bwidth - 1))
- lcd_write_cmd(0x14);
+ if (lcd.addr.x < (lcd.bwidth - 1))
+ lcd_write_cmd(LCD_CMD_SHIFT |
+ LCD_CMD_SHIFT_RIGHT);
lcd.addr.x++;
}
processed = 1;
break;
case 'L': /* shift display left */
- lcd_write_cmd(0x18);
+ lcd_write_cmd(LCD_CMD_SHIFT | LCD_CMD_DISPLAY_SHIFT);
processed = 1;
break;
case 'R': /* shift display right */
- lcd_write_cmd(0x1C);
+ lcd_write_cmd(LCD_CMD_SHIFT | LCD_CMD_DISPLAY_SHIFT |
+ LCD_CMD_SHIFT_RIGHT);
processed = 1;
break;
case 'k': { /* kill end of line */
@@ -1205,7 +1231,7 @@ static inline int handle_lcd_special_code(void)
esc++;
}
- lcd_write_cmd(0x40 | (cgaddr * 8));
+ lcd_write_cmd(LCD_CMD_SET_CGRAM_ADDR | (cgaddr * 8));
for (addr = 0; addr < cgoffset; addr++)
lcd_write_data(cgbytes[addr]);
@@ -1244,13 +1270,18 @@ static inline int handle_lcd_special_code(void)
if ((oldflags ^ lcd.flags) &
(LCD_FLAG_B | LCD_FLAG_C | LCD_FLAG_D))
/* set display mode */
- lcd_write_cmd(0x08
- | ((lcd.flags & LCD_FLAG_D) ? 4 : 0)
- | ((lcd.flags & LCD_FLAG_C) ? 2 : 0)
- | ((lcd.flags & LCD_FLAG_B) ? 1 : 0));
+ /* TODO: This indent party here got ugly, clean it! */
+ lcd_write_cmd(LCD_CMD_DISPLAY_CTRL
+ | ((lcd.flags & LCD_FLAG_D)
+ ? LCD_CMD_DISPLAY_ON : 0)
+ | ((lcd.flags & LCD_FLAG_C)
+ ? LCD_CMD_CURSOR_ON : 0)
+ | ((lcd.flags & LCD_FLAG_B)
+ ? LCD_CMD_BLINK_ON : 0));
/* check whether one of F,N flags was changed */
else if ((oldflags ^ lcd.flags) & (LCD_FLAG_F | LCD_FLAG_N))
- lcd_write_cmd(0x30
+ lcd_write_cmd(LCD_CMD_FUNCTION_SET
+ | LCD_CMD_DATA_LEN_8BITS
| ((lcd.flags & LCD_FLAG_F) ? 4 : 0)
| ((lcd.flags & LCD_FLAG_N) ? 8 : 0));
/* check whether L flag was changed */
@@ -1291,13 +1322,13 @@ static void lcd_write_char(char c)
end of the line */
if (lcd.addr.x < lcd.bwidth)
/* back one char */
- lcd_write_cmd(0x10);
+ lcd_write_cmd(LCD_CMD_SHIFT);
lcd.addr.x--;
}
/* replace with a space */
lcd_write_data(' ');
/* back one char again */
- lcd_write_cmd(0x10);
+ lcd_write_cmd(LCD_CMD_SHIFT);
break;
case '\014':
/* quickly clear the display */
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists