| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20141206121251.GA1250@krava.brq.redhat.com>
Date: Sat, 6 Dec 2014 13:12:51 +0100
From: Jiri Olsa <jolsa@...hat.com>
To: Arnaldo Carvalho de Melo <acme@...hat.com>
Cc: Jiri Olsa <jolsa@...nel.org>, linux-kernel@...r.kernel.org,
Corey Ashford <cjashfor@...ux.vnet.ibm.com>,
David Ahern <dsahern@...il.com>,
Frederic Weisbecker <fweisbec@...il.com>,
Ingo Molnar <mingo@...nel.org>,
Namhyung Kim <namhyung@...nel.org>,
Paul Mackerras <paulus@...ba.org>,
Peter Zijlstra <a.p.zijlstra@...llo.nl>,
Stephane Eranian <eranian@...gle.com>,
Steven Rostedt <rostedt@...dmis.org>
Subject: Re: [PATCH 5/8] perf buildid-cache: Add automated tests
On Fri, Dec 05, 2014 at 01:30:14PM -0200, Arnaldo Carvalho de Melo wrote:
> Em Mon, Dec 01, 2014 at 08:06:26PM +0100, Jiri Olsa escreveu:
> > Adding automated test for buildid-cache command/processing.
>
> Does it only work if one is in the tools/perf/ directory? Why not remove
> that './' from './perf' and ditch that fallback mechanism (BINDIR).
>
> If all you want to make sure is that the binary used is the one just
> built and not the system one, then you can make sure that in your PATH
> the directory with the development one is comes first, right?
>
> I.e. no need for that fallbacking mechanism, etc.
well it's done the same way 'perf test attr' is done,
because both needs external script.. I did it only to
fit my needs.. from my POV I'm either in the:
1) - $SRC/tools/perf - developing perf
or
2) - anywhere else - not developing perf ;-)
in case 1) I need perf to run the in tree version
of the script and
in case 2) it runs the installed version of the script
jirka
>
> - Arnaldo
>
> > Cc: Arnaldo Carvalho de Melo <acme@...hat.com>
> > Cc: Corey Ashford <cjashfor@...ux.vnet.ibm.com>
> > Cc: David Ahern <dsahern@...il.com>
> > Cc: Frederic Weisbecker <fweisbec@...il.com>
> > Cc: Ingo Molnar <mingo@...nel.org>
> > Cc: Namhyung Kim <namhyung@...nel.org>
> > Cc: Paul Mackerras <paulus@...ba.org>
> > Cc: Peter Zijlstra <a.p.zijlstra@...llo.nl>
> > Cc: Stephane Eranian <eranian@...gle.com>
> > Cc: Steven Rostedt <rostedt@...dmis.org>
> > Signed-off-by: Jiri Olsa <jolsa@...nel.org>
> > ---
> > tools/perf/Makefile.perf | 7 +++-
> > tools/perf/tests/buildid-cache.c | 88 +++++++++++++++++++++++++++++++++++++++
> > tools/perf/tests/buildid-cache.sh | 60 ++++++++++++++++++++++++++
> > tools/perf/tests/builtin-test.c | 8 ++++
> > tools/perf/tests/tests.h | 1 +
> > 5 files changed, 163 insertions(+), 1 deletion(-)
> > create mode 100644 tools/perf/tests/buildid-cache.c
> > create mode 100755 tools/perf/tests/buildid-cache.sh
> >
> > diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
> > index 478efa9b2364..28a8f64ab49c 100644
> > --- a/tools/perf/Makefile.perf
> > +++ b/tools/perf/Makefile.perf
> > @@ -447,6 +447,7 @@ endif
> > LIB_OBJS += $(OUTPUT)tests/mmap-thread-lookup.o
> > LIB_OBJS += $(OUTPUT)tests/thread-mg-share.o
> > LIB_OBJS += $(OUTPUT)tests/switch-tracking.o
> > +LIB_OBJS += $(OUTPUT)tests/buildid-cache.o
> >
> > BUILTIN_OBJS += $(OUTPUT)builtin-annotate.o
> > BUILTIN_OBJS += $(OUTPUT)builtin-bench.o
> > @@ -699,6 +700,9 @@ $(OUTPUT)tests/attr.o: tests/attr.c $(OUTPUT)PERF-CFLAGS
> > '-DBINDIR="$(bindir_SQ)"' -DPYTHON='"$(PYTHON_WORD)"' \
> > $<
> >
> > +$(OUTPUT)tests/buildid-cache.o: tests/buildid-cache.c $(OUTPUT)PERF-CFLAGS
> > + $(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) '-DBINDIR="$(bindir_SQ)"' $<
> > +
> > $(OUTPUT)tests/python-use.o: tests/python-use.c $(OUTPUT)PERF-CFLAGS
> > $(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) \
> > -DPYTHONPATH='"$(OUTPUT)python"' \
> > @@ -944,7 +948,8 @@ endif
> > $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests'; \
> > $(INSTALL) tests/attr.py '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests'; \
> > $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr'; \
> > - $(INSTALL) tests/attr/* '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr'
> > + $(INSTALL) tests/attr/* '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr'; \
> > + $(INSTALL) tests/buildid-cache.sh '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests'
> >
> > install: install-bin try-install-man install-traceevent-plugins
> >
> > diff --git a/tools/perf/tests/buildid-cache.c b/tools/perf/tests/buildid-cache.c
> > new file mode 100644
> > index 000000000000..52dfd2765527
> > --- /dev/null
> > +++ b/tools/perf/tests/buildid-cache.c
> > @@ -0,0 +1,88 @@
> > +#include <api/fs/fs.h>
> > +#include "tests.h"
> > +#include "symbol.h"
> > +#include "build-id.h"
> > +#include "debug.h"
> > +#include "exec_cmd.h"
> > +
> > +static int add_kernel(void)
> > +{
> > + char path[PATH_MAX];
> > + u8 build_id[BUILD_ID_SIZE];
> > + char sbuild_id[BUILD_ID_SIZE * 2 + 1];
> > + int ret;
> > +
> > + sprintf(path, "%s/kernel/notes", sysfs__mountpoint());
> > +
> > + ret = sysfs__read_build_id(path, build_id, sizeof(build_id));
> > + TEST_ASSERT_VAL("failed to get kernel buildid", !ret);
> > +
> > + build_id__sprintf(build_id, sizeof(build_id), sbuild_id);
> > +
> > + return build_id_cache__add_s(sbuild_id, buildid_dir,
> > + "[kernel.kallsyms]", true, false);
> > +}
> > +
> > +static int __run_script(const char *script, const char *perf, char *cache)
> > +{
> > + char cmd[PATH_MAX * 3 + 5];
> > +
> > + scnprintf(cmd, sizeof(cmd), "%s/buildid-cache.sh %s %s %d",
> > + script, perf, cache, verbose);
> > + return system(cmd);
> > +}
> > +
> > +static int run_script(char *cache)
> > +{
> > + struct stat st;
> > + char path_perf[PATH_MAX];
> > + char path_script[PATH_MAX];
> > +
> > + /* First try development tree tests. */
> > + if (!lstat("./tests", &st))
> > + return __run_script("./tests", "./perf", cache);
> > +
> > + /* Then installed path. */
> > + snprintf(path_script, PATH_MAX, "%s/tests", perf_exec_path());
> > + snprintf(path_perf, PATH_MAX, "%s/perf", BINDIR);
> > +
> > + if (!lstat(path_script, &st) && !lstat(path_perf, &st))
> > + return __run_script(path_script, path_perf, cache);
> > +
> > + fprintf(stderr, " (omitted)");
> > + return 0;
> > +}
> > +
> > +static int __test__buildid_cache(char *cache)
> > +{
> > + set_buildid_dir(cache);
> > +
> > + /*
> > + * Adding [kernel.kallsyms] entry, because we will test
> > + * its removal via perf buildid-cache clean in the
> > + * script part.
> > + * NOTE it's not possible to add [kernel.kallsyms] entry
> > + * by script at the moment.
> > + */
> > + TEST_ASSERT_VAL("failed to add [kernel.kallsyms] buildid",
> > + !add_kernel());
> > +
> > + TEST_ASSERT_VAL("script failed", !run_script(cache));
> > + return 0;
> > +}
> > +
> > +int test__buildid_cache(void)
> > +{
> > + char cache[50];
> > +
> > + /*
> > + * The directory removal is done within
> > + * __test__buildid_cache function.
> > + */
> > + snprintf(cache, sizeof(cache), "/tmp/perf-XXXXXX");
> > + TEST_ASSERT_VAL("failed to make temp directory", mkdtemp(cache));
> > +
> > + pr_debug("buildid cache directory: %s\n", cache);
> > +
> > + return __test__buildid_cache(cache);
> > +}
> > diff --git a/tools/perf/tests/buildid-cache.sh b/tools/perf/tests/buildid-cache.sh
> > new file mode 100755
> > index 000000000000..fbd92c278c2a
> > --- /dev/null
> > +++ b/tools/perf/tests/buildid-cache.sh
> > @@ -0,0 +1,60 @@
> > +#!/bin/sh
> > +
> > +perf=$1
> > +cache=$2
> > +verbose=$3
> > +
> > +function pr_debug
> > +{
> > + if [ "$verbose" -gt "0" ]; then
> > + echo "$@"
> > + fi
> > +}
> > +
> > +function run_perf
> > +{
> > + $perf --no-pager --buildid-dir $cache $@
> > +}
> > +
> > +# Remove prepared '[kernel.kallsyms]' via 1 byte clean limit
> > +run_perf buildid-cache clean -a -r 1B 2>/dev/null
> > +dir="$cache/[kernel.kallsyms]"
> > +if [ "$(ls -A $cache)" ]; then
> > + pr_debug "Failed to remove [kernel.kallsyms] cache files"
> > + exit 1
> > +fi
> > +
> > +# add perf binary
> > +run_perf buildid-cache -a $perf 2>/dev/null
> > +dir_perf=$cache/`realpath $perf`
> > +if [ ! -d $dir_perf ]; then
> > + pr_debug "Failed to add perf binary into cache"
> > + exit 1
> > +fi
> > +
> > +# remove perf binary
> > +run_perf buildid-cache -r $perf 2>/dev/null
> > +if [ "$(ls -A $cache)" ]; then
> > + pr_debug "Failed to remove perf binary from cache"
> > + exit 1
> > +fi
> > +
> > +# add perf binary
> > +run_perf buildid-cache -a $perf 2>/dev/null
> > +# add sh binary
> > +run_perf buildid-cache -a `realpath /bin/sh` 2>/dev/null
> > +dir_sh=$cache/`realpath /bin/sh`
> > +if [ ! -d $dir_perf -o ! -d $dir_sh ]; then
> > + pr_debug "Failed to add perf/sh binary into cache"
> > + exit 1
> > +fi
> > +
> > +# clean all
> > +run_perf buildid-cache clean -r 2>/dev/null
> > +if [ "$(ls -A $cache)" ]; then
> > + pr_debug "Failed to cleanup the cache"
> > + exit 1
> > +fi
> > +
> > +# last command, $cache directory should be empty
> > +rmdir $cache
> > diff --git a/tools/perf/tests/builtin-test.c b/tools/perf/tests/builtin-test.c
> > index 4b7d9ab0f049..5cbe55634181 100644
> > --- a/tools/perf/tests/builtin-test.c
> > +++ b/tools/perf/tests/builtin-test.c
> > @@ -167,6 +167,14 @@ static struct test {
> > .func = test__fdarray__add,
> > },
> > {
> > + .desc = "Add fd to a fdarray, making it autogrow",
> > + .func = test__fdarray__add,
> > + },
> > + {
> > + .desc = "Test buildid cache",
> > + .func = test__buildid_cache,
> > + },
> > + {
> > .func = NULL,
> > },
> > };
> > diff --git a/tools/perf/tests/tests.h b/tools/perf/tests/tests.h
> > index 00e776a87a9c..190e3df7431f 100644
> > --- a/tools/perf/tests/tests.h
> > +++ b/tools/perf/tests/tests.h
> > @@ -51,6 +51,7 @@ int test__hists_cumulate(void);
> > int test__switch_tracking(void);
> > int test__fdarray__filter(void);
> > int test__fdarray__add(void);
> > +int test__buildid_cache(void);
> >
> > #if defined(__x86_64__) || defined(__i386__) || defined(__arm__)
> > #ifdef HAVE_DWARF_UNWIND_SUPPORT
> > --
> > 1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists