| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1418015529.1095.26.camel@bling.home>
Date: Sun, 07 Dec 2014 22:12:09 -0700
From: Alex Williamson <alex.williamson@...hat.com>
To: "Wu, Feng" <feng.wu@...el.com>
Cc: Eric Auger <eric.auger@...aro.org>,
"tglx@...utronix.de" <tglx@...utronix.de>,
"mingo@...hat.com" <mingo@...hat.com>,
"hpa@...or.com" <hpa@...or.com>, "x86@...nel.org" <x86@...nel.org>,
"gleb@...nel.org" <gleb@...nel.org>,
"pbonzini@...hat.com" <pbonzini@...hat.com>,
"dwmw2@...radead.org" <dwmw2@...radead.org>,
"joro@...tes.org" <joro@...tes.org>,
"jiang.liu@...ux.intel.com" <jiang.liu@...ux.intel.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"iommu@...ts.linux-foundation.org" <iommu@...ts.linux-foundation.org>,
"kvm@...r.kernel.org" <kvm@...r.kernel.org>
Subject: Re: [v2 18/25] KVM: kvm-vfio: implement the VFIO skeleton for VT-d
Posted-Interrupts
On Mon, 2014-12-08 at 04:58 +0000, Wu, Feng wrote:
>
> > -----Original Message-----
> > From: Eric Auger [mailto:eric.auger@...aro.org]
> > Sent: Thursday, December 04, 2014 11:36 PM
> > To: Wu, Feng; tglx@...utronix.de; mingo@...hat.com; hpa@...or.com;
> > x86@...nel.org; gleb@...nel.org; pbonzini@...hat.com;
> > dwmw2@...radead.org; joro@...tes.org; alex.williamson@...hat.com;
> > jiang.liu@...ux.intel.com
> > Cc: linux-kernel@...r.kernel.org; iommu@...ts.linux-foundation.org;
> > kvm@...r.kernel.org
> > Subject: Re: [v2 18/25] KVM: kvm-vfio: implement the VFIO skeleton for VT-d
> > Posted-Interrupts
> >
> > Hi Feng,
> >
> > On 12/03/2014 08:39 AM, Feng Wu wrote:
> > > This patch adds the kvm-vfio interface for VT-d Posted-Interrrupts.
> > > When guests updates MSI/MSI-x information for an assigned-device,
> > update
> > > QEMU will use KVM_DEV_VFIO_DEVICE_POSTING_IRQ attribute to setup
> > > IRTE for VT-d PI. This patch implement this IRQ attribute.
> > s/implement/implements
> > >
> > > Signed-off-by: Feng Wu <feng.wu@...el.com>
> > > ---
> > > include/linux/kvm_host.h | 19 ++++++++
> > > virt/kvm/vfio.c | 103
> > ++++++++++++++++++++++++++++++++++++++++++++++
> > > 2 files changed, 122 insertions(+), 0 deletions(-)
> > >
> > > diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
> > > index 5cd4420..8d06678 100644
> > > --- a/include/linux/kvm_host.h
> > > +++ b/include/linux/kvm_host.h
> > > @@ -1134,6 +1134,25 @@ static inline int
> > kvm_arch_vfio_set_forward(struct kvm_fwd_irq *fwd_irq,
> > > }
> > > #endif
> > >
> > > +#ifdef __KVM_HAVE_ARCH_KVM_VFIO_POSTING
> > > +/*
> > > + * kvm_arch_vfio_update_pi_irte - set IRTE for Posted-Interrupts
> > > + *
> > > + * @kvm: kvm
> > > + * @host_irq: host irq of the interrupt
> > > + * @guest_irq: gsi of the interrupt
> > > + * returns 0 on success, < 0 on failure
> > > + */
> > > +int kvm_arch_vfio_update_pi_irte(struct kvm *kvm, unsigned int host_irq,
> > > + uint32_t guest_irq);
> > > +#else
> > > +static int kvm_arch_vfio_update_pi_irte(struct kvm *kvm, unsigned int
> > host_irq,
> > > + uint32_t guest_irq)
> > > +{
> > > + return 0;
> > > +}
> > > +#endif
> > > +
> > > #ifdef CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT
> > >
> > > static inline void kvm_vcpu_set_in_spin_loop(struct kvm_vcpu *vcpu, bool
> > val)
> > > diff --git a/virt/kvm/vfio.c b/virt/kvm/vfio.c
> > > index 6bc7001..5e5515f 100644
> > > --- a/virt/kvm/vfio.c
> > > +++ b/virt/kvm/vfio.c
> > > @@ -446,6 +446,99 @@ out:
> > > return ret;
> > > }
> > >
> > > +static int kvm_vfio_pci_get_irq_count(struct pci_dev *pdev, int irq_type)
> > > +{
> > > + if (irq_type == VFIO_PCI_INTX_IRQ_INDEX) {
> > > + u8 pin;
> > > +
> > > + pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
> > > + if (pin)
> > > + return 1;
> > > + } else if (irq_type == VFIO_PCI_MSI_IRQ_INDEX)
> > > + return pci_msi_vec_count(pdev);
> > > + else if (irq_type == VFIO_PCI_MSIX_IRQ_INDEX)
> > > + return pci_msix_vec_count(pdev);
> > > +
> > > + return 0;
> > > +}
> > for platform case I was asked to move the retrieval of absolute irq
> > number to the architecture specific part. I don't know if it should
> > apply to PCI stuff as well? This explains why I need to pass the VFIO
> > device (or struct device handle) to the arch specific part. Actually we
> > do the same job, we provide a phys/virt IRQ mapping to KVM, right? So to
> > me our architecture specific API should look quite similar?
>
> In my patch, QEMU passes IRQ type(MSI/MSIx in my case), VFIO device index,
> and sub-index via "struct kvm_vfio_dev_irq" to KVM, then KVM will find the
> real host irq from the VFIO device index and the IRQ type. Is this something
> similar with your patch?
>
> >
> > > +
> > > +static int kvm_vfio_set_pi(struct kvm_device *kdev, int32_t __user *argp)
> > > +{
> > > + struct kvm_vfio_dev_irq pi_info;
> > > + uint32_t *gsi;
> > > + unsigned long minsz;
> > > + struct vfio_device *vdev;
> > > + struct msi_desc *entry;
> > > + struct device *dev;
> > > + struct pci_dev *pdev;
> > > + int i, max, ret;
> > > +
> > > + minsz = offsetofend(struct kvm_vfio_dev_irq, count);
> > > +
> > > + if (copy_from_user(&pi_info, (void __user *)argp, minsz))
> > > + return -EFAULT;
> > > +
> > > + if (pi_info.argsz < minsz || pi_info.index >= VFIO_PCI_NUM_IRQS)
> > PCI specific check, same remark as above but I will let Alex further
> > comment on this and possibly invalidate this commeny ;-)
> > > + return -EINVAL;
> > > +
> > > + vdev = kvm_vfio_get_vfio_device(pi_info.fd);
> > > + if (IS_ERR(vdev))
> > > + return PTR_ERR(vdev);
> > > +
> > > + dev = kvm_vfio_external_base_device(vdev);
> > > + if (!dev || !dev_is_pci(dev)) {
> > > + ret = -EFAULT;
> > > + goto put_vfio_device;
> > > + }
> > > +
> > > + pdev = to_pci_dev(dev);
> > > +
> > > + max = kvm_vfio_pci_get_irq_count(pdev, pi_info.index);
> > > + if (max <= 0) {
> > > + ret = -EFAULT;
> > > + goto put_vfio_device;
> > > + }
> > > +
> > > + if (pi_info.argsz - minsz < pi_info.count * sizeof(int) ||
> > shouldn' we use the actual datatype?
>
> I am afraid I don't get this, could you please be more specific? Thanks a lot!
We could have a platform that supports 64bit INTs.
> > > + pi_info.start >= max || pi_info.start + pi_info.count > max) {
> > > + ret = -EINVAL;
> > > + goto put_vfio_device;
> > > + }
> > > +
> > > + gsi = memdup_user((void __user *)((unsigned long)argp + minsz),
> > > + pi_info.count * sizeof(int));
> > same question as above
> > > + if (IS_ERR(gsi)) {
> > > + ret = PTR_ERR(gsi);
> > > + goto put_vfio_device;
> > > + }
> > > +
> > > +#ifdef CONFIG_PCI_MSI
> > > + for (i = 0; i < pi_info.count; i++) {
> > > + list_for_each_entry(entry, &pdev->msi_list, list) {
> > > + if (entry->msi_attrib.entry_nr != pi_info.start+i)
> > > + continue;
> > > +
> > > + ret = kvm_arch_vfio_update_pi_irte(kdev->kvm,
> > > + entry->irq,
> > > + gsi[i]);
> > > + if (ret) {
> > > + ret = -EFAULT;
> > why -EFAULT? and not propagation of original error code?
> Yes, you are right. Thanks for the comments!
>
> > you may have posting set for part of the subindexes and unset for rest.
> > Isn't it an issue?
>
> QEMU will always set the posting for all the sub-indexes for MSI/MSIx,
> once the guest updates the configuration of some sub-indexes, KVM will
> update it accordingly. So in which case will what you mentioned above
> happen?
QEMU is just one userspace, not necessarily the only userspace. The
kernel shouldn't expect a specific userspace behavior.
> > > + goto free_gsi;
> > > + }
> > > + }
> > > + }
> > > +#endif
> > > +
> > > + ret = 0;
> > > +
> > > +free_gsi:
> > > + kfree(gsi);
> > > +
> > > +put_vfio_device:
> > > + kvm_vfio_put_vfio_device(vdev);
> > > + return ret;
> > > +}
> > > +
> > > static int kvm_vfio_set_device(struct kvm_device *kdev, long attr, u64 arg)
> > > {
> > > int32_t __user *argp = (int32_t __user *)(unsigned long)arg;
> > > @@ -456,6 +549,11 @@ static int kvm_vfio_set_device(struct kvm_device
> > *kdev, long attr, u64 arg)
> > > case KVM_DEV_VFIO_DEVICE_UNFORWARD_IRQ:
> > > ret = kvm_vfio_control_irq_forward(kdev, attr, argp);
> > > break;
> > > +#ifdef __KVM_HAVE_ARCH_KVM_VFIO_POSTING
> > > + case KVM_DEV_VFIO_DEVICE_POSTING_IRQ:
> > > + ret = kvm_vfio_set_pi(kdev, argp);
> > > + break;
> > > +#endif
> > > default:
> > > ret = -ENXIO;
> > > }
> > > @@ -511,6 +609,11 @@ static int kvm_vfio_has_attr(struct kvm_device
> > *dev,
> > > case KVM_DEV_VFIO_DEVICE_UNFORWARD_IRQ:
> > > return 0;
> > > #endif
> > > +#ifdef __KVM_HAVE_ARCH_KVM_VFIO_POSTING
> > > + case KVM_DEV_VFIO_DEVICE_POSTING_IRQ:
> > > + return 0;
> > > +#endif
> > > +
> > > }
> > > break;
> > > }
> > >
>
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists