| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1418077306-2493-1-git-send-email-prabhakar.csengg@gmail.com>
Date: Mon, 8 Dec 2014 22:21:46 +0000
From: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
To: LMML <linux-media@...r.kernel.org>, devicetree@...r.kernel.org,
linux-api <linux-api@...r.kernel.org>,
Hans Verkuil <hverkuil@...all.nl>
Cc: LKML <linux-kernel@...r.kernel.org>,
Hans Verkuil <hans.verkuil@...co.com>,
"Lad, Prabhakar" <prabhakar.csengg@...il.com>
Subject: [PATCH v5] media: platform: add VPFE capture driver support for AM437X
From: Benoit Parrot <bparrot@...com>
This patch adds Video Processing Front End (VPFE) driver for
AM437X family of devices
Driver supports the following:
- V4L2 API using MMAP buffer access based on videobuf2 api
- Asynchronous sensor/decoder sub device registration
- DT support
Signed-off-by: Benoit Parrot <bparrot@...com>
Signed-off-by: Darren Etheridge <detheridge@...com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@...il.com>
---
Changes for v5:
1: Fixed review comments pointed out by Hans, fixing race condition.
v4l2-compliance output:-
----------------------
root@...37x-evm:~# ./v4l2-compliance -s -i 0 -vv
Driver Info:
Driver name : vpfe
Card type :[ 262.490769] vpfe 48328000.vpfe: ================= START STATUS =================
TI AM437x VPFE
Bus info : platform:vpfe [ 262.502285] vpfe 48328000.vpfe: ================== END STATUS ==================
48328000.vpfe
Driver version: 3.18.0
Capabil[ 262.515396] vpfe 48328000.vpfe: invalid input index: 1
ities : 0x85200001
Video Capture
Read/Write
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x05200001
Video Capture
Read/Write
Streaming
Extended Pix Format
Compliance test for device /dev/video0 (not using libv4l2):
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second video open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Test input 0:
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
info: found 7 framesizes for pixel format 56595559
info: found 7 framesizes for pixel format 59565955
info: found 7 framesizes for pixel format 52424752
info: found 7 framesizes for pixel format 31384142
info: found 4 formats for buftype 1
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
info: Could not perform global format test
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
info: test buftype Video Capture
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
Streaming ioctls:
test read/write: OK
Video Capture:
Buffer: 0 Sequence: 0 Field: None Timestamp: 267.115428s
Buffer: 1 Sequence: 1 Field: None Timestamp: 267.138308s
Buffer: 2 Sequence: 2 Field: None Timestamp: 267.161189s
Buffer: 3 Sequence: 3 Field: None Timestamp: 267.367114s
Buffer: 0 Sequence: 4 Field: None Timestamp: 267.389994s
Buffer: 1 Sequence: 5 Field: None Timestamp: 267.412874s
Buffer: 2 Sequence: 6 Field: None Timestamp: 267.435755s
Buffer: 3 Sequence: 7 Field: None Timestamp: 267.458635s
Buffer: 0 Sequence: 8 Field: None Timestamp: 267.481517s
Buffer: 1 Sequence: 9 Field: None Timestamp: 267.504396s
Buffer: 2 Sequence: 10 Field: None Timestamp: 267.527276s
Buffer: 3 Sequence: 11 Field: None Timestamp: 267.550157s
Buffer: 0 Sequence: 12 Field: None Timestamp: 267.573037s
Buffer: 1 Sequence: 13 Field: None Timestamp: 267.595918s
Buffer: 2 Sequence: 14 Field: None Timestamp: 267.618798s
Buffer: 3 Sequence: 15 Field: None Timestamp: 267.641680s
Buffer: 0 Sequence: 16 Field: None Timestamp: 267.664559s
Buffer: 1 Sequence: 17 Field: None Timestamp: 267.687439s
Buffer: 2 Sequence: 18 Field: None Timestamp: 267.710321s
Buffer: 3 Sequence: 19 Field: None Timestamp: 267.733200s
Buffer: 0 Sequence: 20 Field: None Timestamp: 267.756080s
Buffer: 1 Sequence: 21 Field: None Timestamp: 267.778960s
Buffer: 2 Sequence: 22 Field: None Timestamp: 267.801841s
Buffer: 3 Sequence: 23 Field: None Timestamp: 267.824721s
Buffer: 0 Sequence: 24 Field: None Timestamp: 267.847602s
Buffer: 1 Sequence: 25 Field: None Timestamp: 267.870483s
Buffer: 2 Sequence: 26 Field: None Timestamp: 267.893362s
Buffer: 3 Sequence: 27 Field: None Timestamp: 267.916243s
Buffer: 0 Sequence: 28 Field: None Timestamp: 267.939123s
Buffer: 1 Sequence: 29 Field: None Timestamp: 267.962003s
Buffer: 2 Sequence: 30 Field: None Timestamp: 267.984884s
Buffer: 3 Sequence: 31 Field: None Timestamp: 268.007762s
Buffer: 0 Sequence: 32 Field: None Timestamp: 268.030645s
Buffer: 1 Sequence: 33 Field: None Timestamp: 268.053527s
Buffer: 2 Sequence: 34 Field: None Timestamp: 268.076406s
Buffer: 3 Sequence: 35 Field: None Timestamp: 268.099286s
Buffer: 0 Sequence: 36 Field: None Timestamp: 268.122166s
Buffer: 1 Sequence: 37 Field: None Timestamp: 268.145047s
Buffer: 2 Sequence: 38 Field: None Timestamp: 268.167927s
Buffer: 3 Sequence: 39 Field: None Timestamp: 268.190808s
Buffer: 0 Sequence: 40 Field: None Timestamp: 268.213687s
Buffer: 1 Sequence: 41 Field: None Timestamp: 268.236568s
Buffer: 2 Sequence: 42 Field: None Timestamp: 268.259448s
Buffer: 3 Sequence: 43 Field: None Timestamp: 268.282329s
Buffer: 0 Sequence: 44 Field: None Timestamp: 268.305209s
Buffer: 1 Sequence: 45 Field: None Timestamp: 268.328089s
Buffer: 2 Sequence: 46 Field: None Timestamp: 268.350971s
Buffer: 3 Sequence: 47 Field: None Timestamp: 268.373850s
Buffer: 0 Sequence: 48 Field: None Timestamp: 268.396730s
Buffer: 1 Sequence: 49 Field: None Timestamp: 268.419611s
Buffer: 2 Sequence: 50 Field: None Timestamp: 268.442491s
Buffer: 3 Sequence: 51 Field: None Timestamp: 268.465372s
Buffer: 0 Sequence: 52 Field: None Timestamp: 268.488253s
Buffer: 1 Sequence: 53 Field: None Timestamp: 268.511134s
Buffer: 2 Sequence: 54 Field: None Timestamp: 268.534012s
Buffer: 3 Sequence: 55 Field: None Timestamp: 268.556893s
Buffer: 0 Sequence: 56 Field: None Timestamp: 268.579773s
Buffer: 1 Sequence: 57 Field: None Timestamp: 268.602654s
Buffer: 2 Sequence: 58 Field: None Timestamp: 268.625534s
Buffer: 3 Sequence: 59 Field: None Timestamp: 268.648415s
Video Capture (polling):
Buffer: 0 Sequence: 60 Field: None Timestamp: 268.671297s
Buffer: 1 Sequence: 61 Field: None Timestamp: 268.694175s
Buffer: 2 Sequence: 62 Field: None Timestamp: 268.717056s
Buffer: 3 Sequence: 63 Field: None Timestamp: 268.739936s
Buffer: 0 Sequence: 64 Field: None Timestamp: 268.762816s
Buffer: 1 Sequence: 65 Field: None Timestamp: 268.785697s
Buffer: 2 Sequence: 66 Field: None Timestamp: 268.808585s
Buffer: 3 Sequence: 67 Field: None Timestamp: 268.831460s
Buffer: 0 Sequence: 68 Field: None Timestamp: 268.854338s
Buffer: 1 Sequence: 69 Field: None Timestamp: 268.877218s
Buffer: 2 Sequence: 70 Field: None Timestamp: 268.900097s
Buffer: 3 Sequence: 71 Field: None Timestamp: 268.922979s
Buffer: 0 Sequence: 72 Field: None Timestamp: 268.945860s
Buffer: 1 Sequence: 73 Field: None Timestamp: 268.968740s
Buffer: 2 Sequence: 74 Field: None Timestamp: 268.991621s
Buffer: 3 Sequence: 75 Field: None Timestamp: 269.014500s
Buffer: 0 Sequence: 76 Field: None Timestamp: 269.037381s
Buffer: 1 Sequence: 77 Field: None Timestamp: 269.060264s
Buffer: 2 Sequence: 78 Field: None Timestamp: 269.083142s
Buffer: 3 Sequence: 79 Field: None Timestamp: 269.106022s
Buffer: 0 Sequence: 80 Field: None Timestamp: 269.128902s
Buffer: 1 Sequence: 81 Field: None Timestamp: 269.151783s
Buffer: 2 Sequence: 82 Field: None Timestamp: 269.174663s
Buffer: 3 Sequence: 83 Field: None Timestamp: 269.197544s
Buffer: 0 Sequence: 84 Field: None Timestamp: 269.220425s
Buffer: 1 Sequence: 85 Field: None Timestamp: 269.243304s
Buffer: 2 Sequence: 86 Field: None Timestamp: 269.266184s
Buffer: 3 Sequence: 87 Field: None Timestamp: 269.289065s
Buffer: 0 Sequence: 88 Field: None Timestamp: 269.311945s
Buffer: 1 Sequence: 89 Field: None Timestamp: 269.334826s
Buffer: 2 Sequence: 90 Field: None Timestamp: 269.357706s
Buffer: 3 Sequence: 91 Field: None Timestamp: 269.380587s
Buffer: 0 Sequence: 92 Field: None Timestamp: 269.403467s
Buffer: 1 Sequence: 93 Field: None Timestamp: 269.426347s
Buffer: 2 Sequence: 94 Field: None Timestamp: 269.449227s
Buffer: 3 Sequence: 95 Field: None Timestamp: 269.472107s
Buffer: 0 Sequence: 96 Field: None Timestamp: 269.494989s
Buffer: 1 Sequence: 97 Field: None Timestamp: 269.517869s
Buffer: 2 Sequence: 98 Field: None Timestamp: 269.540750s
Buffer: 3 Sequence: 99 Field: None Timestamp: 269.563630s
Buffer: 0 Sequence: 100 Field: None Timestamp: 269.586510s
Buffer: 1 Sequence: 101 Field: None Timestamp: 269.609390s
Buffer: 2 Sequence: 102 Field: None Timestamp: 269.632271s
Buffer: 3 Sequence: 103 Field: None Timestamp: 269.655151s
Buffer: 0 Sequence: 104 Field: None Timestamp: 269.678031s
Buffer: 1 Sequence: 105 Field: None Timestamp: 269.700914s
Buffer: 2 Sequence: 106 Field: None Timestamp: 269.723792s
Buffer: 3 Sequence: 107 Field: None Timestamp: 269.746672s
Buffer: 0 Sequence: 108 Field: None Timestamp: 269.769553s
Buffer: 1 Sequence: 109 Field: None Timestamp: 269.792433s
Buffer: 2 Sequence: 110 Field: None Timestamp: 269.815314s
Buffer: 3 Sequence: 111 Field: None Timestamp: 269.838194s
Buffer: 0 Sequence: 112 Field: None Timestamp: 269.861075s
Buffer: 1 Sequence: 113 Field: None Timestamp: 269.883955s
Buffer: 2 Sequence: 114 Field: None Timestamp: 269.906835s
Buffer: 3 Sequence: 115 Field: None Timestamp: 269.929716s
Buffer: 0 Sequence: 116 Field: None Timestamp: 269.952596s
Buffer: 1 Sequence: 117 Field: None Timestamp: 269.975476s
Buffer: 2 Sequence: 118 Field: None Timestamp: 269.998356s
Buffer: 3 Sequence: 119 Field: None Timestamp: 270.021238s
test MMAP: OK
test USERPTR: OK (Not Supported)
test DMABUF: Cannot test, specify --expbuf-device
Total: 45, Succeeded: 45, Failed: 0, Warnings: 0
root@...37x-evm:~#
.../devicetree/bindings/media/ti-am437x-vpfe.txt | 61 +
MAINTAINERS | 9 +
drivers/media/platform/Kconfig | 1 +
drivers/media/platform/Makefile | 2 +
drivers/media/platform/am437x/Kconfig | 11 +
drivers/media/platform/am437x/Makefile | 3 +
drivers/media/platform/am437x/am437x-vpfe.c | 2780 ++++++++++++++++++++
drivers/media/platform/am437x/am437x-vpfe.h | 283 ++
drivers/media/platform/am437x/am437x-vpfe_regs.h | 140 +
include/uapi/linux/Kbuild | 1 +
include/uapi/linux/am437x-vpfe.h | 122 +
11 files changed, 3413 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt
create mode 100644 drivers/media/platform/am437x/Kconfig
create mode 100644 drivers/media/platform/am437x/Makefile
create mode 100644 drivers/media/platform/am437x/am437x-vpfe.c
create mode 100644 drivers/media/platform/am437x/am437x-vpfe.h
create mode 100644 drivers/media/platform/am437x/am437x-vpfe_regs.h
create mode 100644 include/uapi/linux/am437x-vpfe.h
diff --git a/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt b/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt
new file mode 100644
index 0000000..3932e76
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt
@@ -0,0 +1,61 @@
+Texas Instruments AM437x CAMERA (VPFE)
+--------------------------------------
+
+The Video Processing Front End (VPFE) is a key component for image capture
+applications. The capture module provides the system interface and the
+processing capability to connect RAW image-sensor modules and video decoders
+to the AM437x device.
+
+Required properties:
+- compatible: must be "ti,am437x-vpfe"
+- reg: physical base address and length of the registers set for the device;
+- interrupts: should contain IRQ line for the VPFE;
+- ti,am437x-vpfe-interface: can be one of the following,
+ 0 - Raw Bayer Interface.
+ 1 - 8 Bit BT656 Interface.
+ 2 - 10 Bit BT656 Interface.
+ 3 - YCbCr 8 Bit Interface.
+ 4 - YCbCr 16 Bit Interface.
+
+VPFE supports a single port node with parallel bus. It should contain one
+'port' child node with child 'endpoint' node. Please refer to the bindings
+defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+ vpfe: vpfe@...34000 {
+ compatible = "ti,am437x-vpfe";
+ reg = <0x48328000 0x2000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe_pins_default>;
+ pinctrl-1 = <&vpfe_pins_sleep>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vpfe0_ep: endpoint {
+ remote-endpoint = <&ov2659_1>;
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
+
+ i2c1: i2c@...2a000 {
+
+ ov2659@30 {
+ compatible = "ti,ov2659";
+ reg = <0x30>;
+
+ port {
+ ov2659_1: endpoint {
+ remote-endpoint = <&vpfe0_ep>;
+ bus-width = <8>;
+ mclk-frequency = <12000000>;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 9c49eb6..5b1cb1a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8543,6 +8543,15 @@ S: Maintained
F: drivers/media/platform/davinci/
F: include/media/davinci/
+TI AM437X VPFE DRIVER
+M: Lad, Prabhakar <prabhakar.csengg@...il.com>
+L: linux-media@...r.kernel.org
+W: http://linuxtv.org/
+Q: http://patchwork.linuxtv.org/project/linux-media/list/
+T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
+S: Maintained
+F: drivers/media/platform/am437x/
+
SIS 190 ETHERNET DRIVER
M: Francois Romieu <romieu@...zoreil.com>
L: netdev@...r.kernel.org
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 0c61155..6d94045 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -126,6 +126,7 @@ config VIDEO_S3C_CAMIF
source "drivers/media/platform/soc_camera/Kconfig"
source "drivers/media/platform/exynos4-is/Kconfig"
source "drivers/media/platform/s5p-tv/Kconfig"
+source "drivers/media/platform/am437x/Kconfig"
endif # V4L_PLATFORM_DRIVERS
diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index b818afb..7bb6d46 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -49,4 +49,6 @@ obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1/
obj-y += omap/
+obj-$(CONFIG_VIDEO_AM437X_VPFE) += am437x/
+
ccflags-y += -I$(srctree)/drivers/media/i2c
diff --git a/drivers/media/platform/am437x/Kconfig b/drivers/media/platform/am437x/Kconfig
new file mode 100644
index 0000000..7b023a76
--- /dev/null
+++ b/drivers/media/platform/am437x/Kconfig
@@ -0,0 +1,11 @@
+config VIDEO_AM437X_VPFE
+ tristate "TI AM437x VPFE video capture driver"
+ depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on SOC_AM43XX || COMPILE_TEST
+ select VIDEOBUF2_DMA_CONTIG
+ help
+ Support for AM437x Video Processing Front End based Video
+ Capture Driver.
+
+ To compile this driver as a module, choose M here. The module
+ will be called am437x-vpfe.
diff --git a/drivers/media/platform/am437x/Makefile b/drivers/media/platform/am437x/Makefile
new file mode 100644
index 0000000..d11fff1
--- /dev/null
+++ b/drivers/media/platform/am437x/Makefile
@@ -0,0 +1,3 @@
+# Makefile for AM437x VPFE driver
+
+obj-$(CONFIG_VIDEO_AM437X_VPFE) += am437x-vpfe.o
diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
new file mode 100644
index 0000000..c2b29a2
--- /dev/null
+++ b/drivers/media/platform/am437x/am437x-vpfe.c
@@ -0,0 +1,2780 @@
+/*
+ * TI VPFE capture Driver
+ *
+ * Copyright (C) 2013 - 2014 Texas Instruments, Inc.
+ *
+ * Benoit Parrot <bparrot@...com>
+ * Lad, Prabhakar <prabhakar.csengg@...il.com>
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-of.h>
+
+#include "am437x-vpfe.h"
+
+#define VPFE_MODULE_NAME "vpfe"
+#define VPFE_VERSION "0.1.0"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level 0-8");
+
+#define vpfe_dbg(level, dev, fmt, arg...) \
+ v4l2_dbg(level, debug, &dev->v4l2_dev, fmt, ##arg)
+#define vpfe_info(dev, fmt, arg...) \
+ v4l2_info(&dev->v4l2_dev, fmt, ##arg)
+#define vpfe_err(dev, fmt, arg...) \
+ v4l2_err(&dev->v4l2_dev, fmt, ##arg)
+
+/* standard information */
+struct vpfe_standard {
+ v4l2_std_id std_id;
+ unsigned int width;
+ unsigned int height;
+ struct v4l2_fract pixelaspect;
+ int frame_format;
+};
+
+const struct vpfe_standard vpfe_standards[] = {
+ {V4L2_STD_525_60, 720, 480, {11, 10}, 1},
+ {V4L2_STD_625_50, 720, 576, {54, 59}, 1},
+};
+
+struct bus_format {
+ unsigned int width;
+ unsigned int bpp;
+};
+
+/*
+ * struct vpfe_fmt - VPFE media bus format information
+ * @name: V4L2 format description
+ * @code: V4L2 media bus format code
+ * @shifted: V4L2 media bus format code for the same pixel layout but
+ * shifted to be 8 bits per pixel. =0 if format is not shiftable.
+ * @pixelformat: V4L2 pixel format FCC identifier
+ * @width: Bits per pixel (when transferred over a bus)
+ * @bpp: Bytes per pixel (when stored in memory)
+ * @supported: Indicates format supported by subdev
+ */
+struct vpfe_fmt {
+ const char *name;
+ u32 fourcc;
+ u32 code;
+ struct bus_format l;
+ struct bus_format s;
+ bool supported;
+ u32 index;
+};
+
+static struct vpfe_fmt formats[] = {
+ {
+ .name = "YUV 4:2:2 packed, YCbYCr",
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .code = MEDIA_BUS_FMT_YUYV8_2X8,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ .supported = false,
+ }, {
+ .name = "YUV 4:2:2 packed, CbYCrY",
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .code = MEDIA_BUS_FMT_UYVY8_2X8,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ .supported = false,
+ }, {
+ .name = "YUV 4:2:2 packed, YCrYCb",
+ .fourcc = V4L2_PIX_FMT_YVYU,
+ .code = MEDIA_BUS_FMT_YVYU8_2X8,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ .supported = false,
+ }, {
+ .name = "YUV 4:2:2 packed, CrYCbY",
+ .fourcc = V4L2_PIX_FMT_VYUY,
+ .code = MEDIA_BUS_FMT_VYUY8_2X8,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ .supported = false,
+ }, {
+ .name = "RAW8 BGGR",
+ .fourcc = V4L2_PIX_FMT_SBGGR8,
+ .code = MEDIA_BUS_FMT_SBGGR8_1X8,
+ .l.width = 10,
+ .l.bpp = 2,
+ .s.width = 8,
+ .s.bpp = 1,
+ .supported = false,
+ }, {
+ .name = "RAW8 GBRG",
+ .fourcc = V4L2_PIX_FMT_SGBRG8,
+ .code = MEDIA_BUS_FMT_SGBRG8_1X8,
+ .l.width = 10,
+ .l.bpp = 2,
+ .s.width = 8,
+ .s.bpp = 1,
+ .supported = false,
+ }, {
+ .name = "RAW8 GRBG",
+ .fourcc = V4L2_PIX_FMT_SGRBG8,
+ .code = MEDIA_BUS_FMT_SGRBG8_1X8,
+ .l.width = 10,
+ .l.bpp = 2,
+ .s.width = 8,
+ .s.bpp = 1,
+ .supported = false,
+ }, {
+ .name = "RAW8 RGGB",
+ .fourcc = V4L2_PIX_FMT_SRGGB8,
+ .code = MEDIA_BUS_FMT_SRGGB8_1X8,
+ .l.width = 10,
+ .l.bpp = 2,
+ .s.width = 8,
+ .s.bpp = 1,
+ .supported = false,
+ }, {
+ .name = "RGB565 (LE)",
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ .supported = false,
+ }, {
+ .name = "RGB565 (BE)",
+ .fourcc = V4L2_PIX_FMT_RGB565X,
+ .code = MEDIA_BUS_FMT_RGB565_2X8_BE,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ .supported = false,
+ },
+};
+
+static int
+__vpfe_get_format(struct vpfe_device *vpfe,
+ struct v4l2_format *format, unsigned int *bpp);
+
+static struct vpfe_fmt *find_format_by_code(unsigned int code)
+{
+ struct vpfe_fmt *fmt;
+ unsigned int k;
+
+ for (k = 0; k < ARRAY_SIZE(formats); k++) {
+ fmt = &formats[k];
+ if (fmt->code == code)
+ return fmt;
+ }
+
+ return NULL;
+}
+
+static struct vpfe_fmt *find_format_by_pix(unsigned int pixelformat)
+{
+ struct vpfe_fmt *fmt;
+ unsigned int k;
+
+ for (k = 0; k < ARRAY_SIZE(formats); k++) {
+ fmt = &formats[k];
+ if (fmt->fourcc == pixelformat)
+ return fmt;
+ }
+
+ return NULL;
+}
+
+static void
+mbus_to_pix(struct vpfe_device *vpfe,
+ const struct v4l2_mbus_framefmt *mbus,
+ struct v4l2_pix_format *pix, unsigned int *bpp)
+{
+ struct vpfe_subdev_info *sdinfo = vpfe->current_subdev;
+ unsigned int bus_width = sdinfo->vpfe_param.bus_width;
+ struct vpfe_fmt *fmt;
+
+ fmt = find_format_by_code(mbus->code);
+ if (WARN_ON(fmt == NULL)) {
+ pr_err("Invalid mbus code set\n");
+ *bpp = 1;
+ return;
+ }
+
+ memset(pix, 0, sizeof(*pix));
+ v4l2_fill_pix_format(pix, mbus);
+ pix->pixelformat = fmt->fourcc;
+ *bpp = (bus_width == 10) ? fmt->l.bpp : fmt->s.bpp;
+
+ /* pitch should be 32 bytes aligned */
+ pix->bytesperline = ALIGN(pix->width * *bpp, 32);
+ pix->sizeimage = pix->bytesperline * pix->height;
+}
+
+static void pix_to_mbus(struct vpfe_device *vpfe,
+ struct v4l2_pix_format *pix_fmt,
+ struct v4l2_mbus_framefmt *mbus_fmt)
+{
+ struct vpfe_fmt *fmt;
+
+ fmt = find_format_by_pix(pix_fmt->pixelformat);
+ if (!fmt) {
+ /* default to first entry */
+ vpfe_dbg(3, vpfe, "Invalid pixel code: %x, default used instead\n",
+ pix_fmt->pixelformat);
+ fmt = &formats[0];
+ }
+
+ memset(mbus_fmt, 0, sizeof(*mbus_fmt));
+ v4l2_fill_mbus_format(mbus_fmt, pix_fmt, fmt->code);
+}
+
+/* Print Four-character-code (FOURCC) */
+static char *print_fourcc(u32 fmt)
+{
+ static char code[5];
+
+ code[0] = (unsigned char)(fmt & 0xff);
+ code[1] = (unsigned char)((fmt >> 8) & 0xff);
+ code[2] = (unsigned char)((fmt >> 16) & 0xff);
+ code[3] = (unsigned char)((fmt >> 24) & 0xff);
+ code[4] = '\0';
+
+ return code;
+}
+
+static int
+cmp_v4l2_format(const struct v4l2_format *lhs, const struct v4l2_format *rhs)
+{
+ return lhs->type == rhs->type &&
+ lhs->fmt.pix.width == rhs->fmt.pix.width &&
+ lhs->fmt.pix.height == rhs->fmt.pix.height &&
+ lhs->fmt.pix.pixelformat == rhs->fmt.pix.pixelformat &&
+ lhs->fmt.pix.field == rhs->fmt.pix.field &&
+ lhs->fmt.pix.colorspace == rhs->fmt.pix.colorspace &&
+ lhs->fmt.pix.ycbcr_enc == rhs->fmt.pix.ycbcr_enc &&
+ lhs->fmt.pix.quantization == rhs->fmt.pix.quantization;
+}
+
+static inline u32 vpfe_reg_read(struct vpfe_ccdc *ccdc, u32 offset)
+{
+ return ioread32(ccdc->ccdc_cfg.base_addr + offset);
+}
+
+static inline void vpfe_reg_write(struct vpfe_ccdc *ccdc, u32 val, u32 offset)
+{
+ iowrite32(val, ccdc->ccdc_cfg.base_addr + offset);
+}
+
+static inline struct vpfe_device *to_vpfe(struct vpfe_ccdc *ccdc)
+{
+ return container_of(ccdc, struct vpfe_device, ccdc);
+}
+
+static inline struct vpfe_cap_buffer *to_vpfe_buffer(struct vb2_buffer *vb)
+{
+ return container_of(vb, struct vpfe_cap_buffer, vb);
+}
+
+static inline void vpfe_pcr_enable(struct vpfe_ccdc *ccdc, int flag)
+{
+ vpfe_reg_write(ccdc, !!flag, VPFE_PCR);
+}
+
+static void vpfe_config_enable(struct vpfe_ccdc *ccdc, int flag)
+{
+ unsigned int cfg;
+
+ if (!flag) {
+ cfg = vpfe_reg_read(ccdc, VPFE_CONFIG);
+ cfg &= ~(VPFE_CONFIG_EN_ENABLE << VPFE_CONFIG_EN_SHIFT);
+ } else {
+ cfg = VPFE_CONFIG_EN_ENABLE << VPFE_CONFIG_EN_SHIFT;
+ }
+
+ vpfe_reg_write(ccdc, cfg, VPFE_CONFIG);
+}
+
+static void vpfe_ccdc_setwin(struct vpfe_ccdc *ccdc,
+ struct v4l2_rect *image_win,
+ enum ccdc_frmfmt frm_fmt,
+ int bpp)
+{
+ int horz_start, horz_nr_pixels;
+ int vert_start, vert_nr_lines;
+ int val, mid_img;
+
+ /*
+ * ppc - per pixel count. indicates how many pixels per cell
+ * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
+ * raw capture this is 1
+ */
+ horz_start = image_win->left * bpp;
+ horz_nr_pixels = (image_win->width * bpp) - 1;
+ vpfe_reg_write(ccdc, (horz_start << VPFE_HORZ_INFO_SPH_SHIFT) |
+ horz_nr_pixels, VPFE_HORZ_INFO);
+
+ vert_start = image_win->top;
+
+ if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+ vert_nr_lines = (image_win->height >> 1) - 1;
+ vert_start >>= 1;
+ /* Since first line doesn't have any data */
+ vert_start += 1;
+ /* configure VDINT0 */
+ val = (vert_start << VPFE_VDINT_VDINT0_SHIFT);
+ } else {
+ /* Since first line doesn't have any data */
+ vert_start += 1;
+ vert_nr_lines = image_win->height - 1;
+ /*
+ * configure VDINT0 and VDINT1. VDINT1 will be at half
+ * of image height
+ */
+ mid_img = vert_start + (image_win->height / 2);
+ val = (vert_start << VPFE_VDINT_VDINT0_SHIFT) |
+ (mid_img & VPFE_VDINT_VDINT1_MASK);
+ }
+
+ vpfe_reg_write(ccdc, val, VPFE_VDINT);
+
+ vpfe_reg_write(ccdc, (vert_start << VPFE_VERT_START_SLV0_SHIFT) |
+ vert_start, VPFE_VERT_START);
+ vpfe_reg_write(ccdc, vert_nr_lines, VPFE_VERT_LINES);
+}
+
+static void vpfe_reg_dump(struct vpfe_ccdc *ccdc)
+{
+ struct vpfe_device *vpfe = to_vpfe(ccdc);
+
+ vpfe_dbg(3, vpfe, "ALAW: 0x%x\n", vpfe_reg_read(ccdc, VPFE_ALAW));
+ vpfe_dbg(3, vpfe, "CLAMP: 0x%x\n", vpfe_reg_read(ccdc, VPFE_CLAMP));
+ vpfe_dbg(3, vpfe, "DCSUB: 0x%x\n", vpfe_reg_read(ccdc, VPFE_DCSUB));
+ vpfe_dbg(3, vpfe, "BLKCMP: 0x%x\n", vpfe_reg_read(ccdc, VPFE_BLKCMP));
+ vpfe_dbg(3, vpfe, "COLPTN: 0x%x\n", vpfe_reg_read(ccdc, VPFE_COLPTN));
+ vpfe_dbg(3, vpfe, "SDOFST: 0x%x\n", vpfe_reg_read(ccdc, VPFE_SDOFST));
+ vpfe_dbg(3, vpfe, "SYN_MODE: 0x%x\n",
+ vpfe_reg_read(ccdc, VPFE_SYNMODE));
+ vpfe_dbg(3, vpfe, "HSIZE_OFF: 0x%x\n",
+ vpfe_reg_read(ccdc, VPFE_HSIZE_OFF));
+ vpfe_dbg(3, vpfe, "HORZ_INFO: 0x%x\n",
+ vpfe_reg_read(ccdc, VPFE_HORZ_INFO));
+ vpfe_dbg(3, vpfe, "VERT_START: 0x%x\n",
+ vpfe_reg_read(ccdc, VPFE_VERT_START));
+ vpfe_dbg(3, vpfe, "VERT_LINES: 0x%x\n",
+ vpfe_reg_read(ccdc, VPFE_VERT_LINES));
+}
+
+static int
+vpfe_ccdc_validate_param(struct vpfe_ccdc *ccdc,
+ struct vpfe_ccdc_config_params_raw *ccdcparam)
+{
+ struct vpfe_device *vpfe = to_vpfe(ccdc);
+ u8 max_gamma, max_data;
+
+ if (!ccdcparam->alaw.enable)
+ return 0;
+
+ max_gamma = ccdc_gamma_width_max_bit(ccdcparam->alaw.gamma_wd);
+ max_data = ccdc_data_size_max_bit(ccdcparam->data_sz);
+
+ if (ccdcparam->alaw.gamma_wd > VPFE_CCDC_GAMMA_BITS_09_0 ||
+ ccdcparam->alaw.gamma_wd < VPFE_CCDC_GAMMA_BITS_15_6 ||
+ max_gamma > max_data) {
+ vpfe_dbg(1, vpfe, "Invalid data line select\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void
+vpfe_ccdc_update_raw_params(struct vpfe_ccdc *ccdc,
+ struct vpfe_ccdc_config_params_raw *raw_params)
+{
+ struct vpfe_ccdc_config_params_raw *config_params =
+ &ccdc->ccdc_cfg.bayer.config_params;
+
+ config_params = raw_params;
+}
+
+/*
+ * vpfe_ccdc_restore_defaults()
+ * This function will write defaults to all CCDC registers
+ */
+static void vpfe_ccdc_restore_defaults(struct vpfe_ccdc *ccdc)
+{
+ int i;
+
+ /* Disable CCDC */
+ vpfe_pcr_enable(ccdc, 0);
+
+ /* set all registers to default value */
+ for (i = 4; i <= 0x94; i += 4)
+ vpfe_reg_write(ccdc, 0, i);
+
+ vpfe_reg_write(ccdc, VPFE_NO_CULLING, VPFE_CULLING);
+ vpfe_reg_write(ccdc, VPFE_CCDC_GAMMA_BITS_11_2, VPFE_ALAW);
+}
+
+static int vpfe_ccdc_close(struct vpfe_ccdc *ccdc, struct device *dev)
+{
+ int dma_cntl, i, pcr;
+
+ /* If the CCDC module is still busy wait for it to be done */
+ for (i = 0; i < 10; i++) {
+ usleep_range(5000, 6000);
+ pcr = vpfe_reg_read(ccdc, VPFE_PCR);
+ if (!pcr)
+ break;
+
+ /* make sure it it is disabled */
+ vpfe_pcr_enable(ccdc, 0);
+ }
+
+ /* Disable CCDC by resetting all register to default POR values */
+ vpfe_ccdc_restore_defaults(ccdc);
+
+ /* if DMA_CNTL overflow bit is set. Clear it
+ * It appears to take a while for this to become quiescent ~20ms
+ */
+ for (i = 0; i < 10; i++) {
+ dma_cntl = vpfe_reg_read(ccdc, VPFE_DMA_CNTL);
+ if (!(dma_cntl & VPFE_DMA_CNTL_OVERFLOW))
+ break;
+
+ /* Clear the overflow bit */
+ vpfe_reg_write(ccdc, dma_cntl, VPFE_DMA_CNTL);
+ usleep_range(5000, 6000);
+ }
+
+ /* Disabled the module at the CONFIG level */
+ vpfe_config_enable(ccdc, 0);
+
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
+
+static int vpfe_ccdc_set_params(struct vpfe_ccdc *ccdc, void __user *params)
+{
+ struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc);
+ struct vpfe_ccdc_config_params_raw raw_params;
+ int x;
+
+ if (ccdc->ccdc_cfg.if_type != VPFE_RAW_BAYER)
+ return -EINVAL;
+
+ x = copy_from_user(&raw_params, params, sizeof(raw_params));
+ if (x) {
+ vpfe_dbg(1, vpfe,
+ "vpfe_ccdc_set_params: error in copying ccdc params, %d\n",
+ x);
+ return -EFAULT;
+ }
+
+ if (!vpfe_ccdc_validate_param(ccdc, &raw_params)) {
+ vpfe_ccdc_update_raw_params(ccdc, &raw_params);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+/*
+ * vpfe_ccdc_config_ycbcr()
+ * This function will configure CCDC for YCbCr video capture
+ */
+static void vpfe_ccdc_config_ycbcr(struct vpfe_ccdc *ccdc)
+{
+ struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc);
+ struct ccdc_params_ycbcr *params = &ccdc->ccdc_cfg.ycbcr;
+ u32 syn_mode;
+
+ vpfe_dbg(3, vpfe, "vpfe_ccdc_config_ycbcr:\n");
+ /*
+ * first restore the CCDC registers to default values
+ * This is important since we assume default values to be set in
+ * a lot of registers that we didn't touch
+ */
+ vpfe_ccdc_restore_defaults(ccdc);
+
+ /*
+ * configure pixel format, frame format, configure video frame
+ * format, enable output to SDRAM, enable internal timing generator
+ * and 8bit pack mode
+ */
+ syn_mode = (((params->pix_fmt & VPFE_SYN_MODE_INPMOD_MASK) <<
+ VPFE_SYN_MODE_INPMOD_SHIFT) |
+ ((params->frm_fmt & VPFE_SYN_FLDMODE_MASK) <<
+ VPFE_SYN_FLDMODE_SHIFT) | VPFE_VDHDEN_ENABLE |
+ VPFE_WEN_ENABLE | VPFE_DATA_PACK_ENABLE);
+
+ /* setup BT.656 sync mode */
+ if (params->bt656_enable) {
+ vpfe_reg_write(ccdc, VPFE_REC656IF_BT656_EN, VPFE_REC656IF);
+
+ /*
+ * configure the FID, VD, HD pin polarity,
+ * fld,hd pol positive, vd negative, 8-bit data
+ */
+ syn_mode |= VPFE_SYN_MODE_VD_POL_NEGATIVE;
+ if (ccdc->ccdc_cfg.if_type == VPFE_BT656_10BIT)
+ syn_mode |= VPFE_SYN_MODE_10BITS;
+ else
+ syn_mode |= VPFE_SYN_MODE_8BITS;
+ } else {
+ /* y/c external sync mode */
+ syn_mode |= (((params->fid_pol & VPFE_FID_POL_MASK) <<
+ VPFE_FID_POL_SHIFT) |
+ ((params->hd_pol & VPFE_HD_POL_MASK) <<
+ VPFE_HD_POL_SHIFT) |
+ ((params->vd_pol & VPFE_VD_POL_MASK) <<
+ VPFE_VD_POL_SHIFT));
+ }
+ vpfe_reg_write(ccdc, syn_mode, VPFE_SYNMODE);
+
+ /* configure video window */
+ vpfe_ccdc_setwin(ccdc, ¶ms->win,
+ params->frm_fmt, params->bytesperpixel);
+
+ /*
+ * configure the order of y cb cr in SDRAM, and disable latch
+ * internal register on vsync
+ */
+ if (ccdc->ccdc_cfg.if_type == VPFE_BT656_10BIT)
+ vpfe_reg_write(ccdc,
+ (params->pix_order << VPFE_CCDCFG_Y8POS_SHIFT) |
+ VPFE_LATCH_ON_VSYNC_DISABLE |
+ VPFE_CCDCFG_BW656_10BIT, VPFE_CCDCFG);
+ else
+ vpfe_reg_write(ccdc,
+ (params->pix_order << VPFE_CCDCFG_Y8POS_SHIFT) |
+ VPFE_LATCH_ON_VSYNC_DISABLE, VPFE_CCDCFG);
+
+ /*
+ * configure the horizontal line offset. This should be a
+ * on 32 byte boundary. So clear LSB 5 bits
+ */
+ vpfe_reg_write(ccdc, params->bytesperline, VPFE_HSIZE_OFF);
+
+ /* configure the memory line offset */
+ if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)
+ /* two fields are interleaved in memory */
+ vpfe_reg_write(ccdc, VPFE_SDOFST_FIELD_INTERLEAVED,
+ VPFE_SDOFST);
+}
+
+static void
+vpfe_ccdc_config_black_clamp(struct vpfe_ccdc *ccdc,
+ struct vpfe_ccdc_black_clamp *bclamp)
+{
+ u32 val;
+
+ if (!bclamp->enable) {
+ /* configure DCSub */
+ val = (bclamp->dc_sub) & VPFE_BLK_DC_SUB_MASK;
+ vpfe_reg_write(ccdc, val, VPFE_DCSUB);
+ vpfe_reg_write(ccdc, VPFE_CLAMP_DEFAULT_VAL, VPFE_CLAMP);
+ return;
+ }
+ /*
+ * Configure gain, Start pixel, No of line to be avg,
+ * No of pixel/line to be avg, & Enable the Black clamping
+ */
+ val = ((bclamp->sgain & VPFE_BLK_SGAIN_MASK) |
+ ((bclamp->start_pixel & VPFE_BLK_ST_PXL_MASK) <<
+ VPFE_BLK_ST_PXL_SHIFT) |
+ ((bclamp->sample_ln & VPFE_BLK_SAMPLE_LINE_MASK) <<
+ VPFE_BLK_SAMPLE_LINE_SHIFT) |
+ ((bclamp->sample_pixel & VPFE_BLK_SAMPLE_LN_MASK) <<
+ VPFE_BLK_SAMPLE_LN_SHIFT) | VPFE_BLK_CLAMP_ENABLE);
+ vpfe_reg_write(ccdc, val, VPFE_CLAMP);
+ /* If Black clamping is enable then make dcsub 0 */
+ vpfe_reg_write(ccdc, VPFE_DCSUB_DEFAULT_VAL, VPFE_DCSUB);
+}
+
+static void
+vpfe_ccdc_config_black_compense(struct vpfe_ccdc *ccdc,
+ struct vpfe_ccdc_black_compensation *bcomp)
+{
+ u32 val;
+
+ val = ((bcomp->b & VPFE_BLK_COMP_MASK) |
+ ((bcomp->gb & VPFE_BLK_COMP_MASK) <<
+ VPFE_BLK_COMP_GB_COMP_SHIFT) |
+ ((bcomp->gr & VPFE_BLK_COMP_MASK) <<
+ VPFE_BLK_COMP_GR_COMP_SHIFT) |
+ ((bcomp->r & VPFE_BLK_COMP_MASK) <<
+ VPFE_BLK_COMP_R_COMP_SHIFT));
+ vpfe_reg_write(ccdc, val, VPFE_BLKCMP);
+}
+
+/*
+ * vpfe_ccdc_config_raw()
+ * This function will configure CCDC for Raw capture mode
+ */
+static void vpfe_ccdc_config_raw(struct vpfe_ccdc *ccdc)
+{
+ struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc);
+ struct vpfe_ccdc_config_params_raw *config_params =
+ &ccdc->ccdc_cfg.bayer.config_params;
+ struct ccdc_params_raw *params = &ccdc->ccdc_cfg.bayer;
+ unsigned int syn_mode;
+ unsigned int val;
+
+ vpfe_dbg(3, vpfe, "vpfe_ccdc_config_raw:\n");
+
+ /* Reset CCDC */
+ vpfe_ccdc_restore_defaults(ccdc);
+
+ /* Disable latching function registers on VSYNC */
+ vpfe_reg_write(ccdc, VPFE_LATCH_ON_VSYNC_DISABLE, VPFE_CCDCFG);
+
+ /*
+ * Configure the vertical sync polarity(SYN_MODE.VDPOL),
+ * horizontal sync polarity (SYN_MODE.HDPOL), frame id polarity
+ * (SYN_MODE.FLDPOL), frame format(progressive or interlace),
+ * data size(SYNMODE.DATSIZ), &pixel format (Input mode), output
+ * SDRAM, enable internal timing generator
+ */
+ syn_mode = (((params->vd_pol & VPFE_VD_POL_MASK) << VPFE_VD_POL_SHIFT) |
+ ((params->hd_pol & VPFE_HD_POL_MASK) << VPFE_HD_POL_SHIFT) |
+ ((params->fid_pol & VPFE_FID_POL_MASK) <<
+ VPFE_FID_POL_SHIFT) | ((params->frm_fmt &
+ VPFE_FRM_FMT_MASK) << VPFE_FRM_FMT_SHIFT) |
+ ((config_params->data_sz & VPFE_DATA_SZ_MASK) <<
+ VPFE_DATA_SZ_SHIFT) | ((params->pix_fmt &
+ VPFE_PIX_FMT_MASK) << VPFE_PIX_FMT_SHIFT) |
+ VPFE_WEN_ENABLE | VPFE_VDHDEN_ENABLE);
+
+ /* Enable and configure aLaw register if needed */
+ if (config_params->alaw.enable) {
+ val = ((config_params->alaw.gamma_wd &
+ VPFE_ALAW_GAMMA_WD_MASK) | VPFE_ALAW_ENABLE);
+ vpfe_reg_write(ccdc, val, VPFE_ALAW);
+ vpfe_dbg(3, vpfe, "\nWriting 0x%x to ALAW...\n", val);
+ }
+
+ /* Configure video window */
+ vpfe_ccdc_setwin(ccdc, ¶ms->win, params->frm_fmt,
+ params->bytesperpixel);
+
+ /* Configure Black Clamp */
+ vpfe_ccdc_config_black_clamp(ccdc, &config_params->blk_clamp);
+
+ /* Configure Black level compensation */
+ vpfe_ccdc_config_black_compense(ccdc, &config_params->blk_comp);
+
+ /* If data size is 8 bit then pack the data */
+ if ((config_params->data_sz == VPFE_CCDC_DATA_8BITS) ||
+ config_params->alaw.enable)
+ syn_mode |= VPFE_DATA_PACK_ENABLE;
+
+ /*
+ * Configure Horizontal offset register. If pack 8 is enabled then
+ * 1 pixel will take 1 byte
+ */
+ vpfe_reg_write(ccdc, params->bytesperline, VPFE_HSIZE_OFF);
+
+ vpfe_dbg(3, vpfe, "Writing %d (%x) to HSIZE_OFF\n",
+ params->bytesperline, params->bytesperline);
+
+ /* Set value for SDOFST */
+ if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
+ if (params->image_invert_enable) {
+ /* For interlace inverse mode */
+ vpfe_reg_write(ccdc, VPFE_INTERLACED_IMAGE_INVERT,
+ VPFE_SDOFST);
+ } else {
+ /* For interlace non inverse mode */
+ vpfe_reg_write(ccdc, VPFE_INTERLACED_NO_IMAGE_INVERT,
+ VPFE_SDOFST);
+ }
+ } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
+ vpfe_reg_write(ccdc, VPFE_PROGRESSIVE_NO_IMAGE_INVERT,
+ VPFE_SDOFST);
+ }
+
+ vpfe_reg_write(ccdc, syn_mode, VPFE_SYNMODE);
+
+ vpfe_reg_dump(ccdc);
+}
+
+static inline int
+vpfe_ccdc_set_buftype(struct vpfe_ccdc *ccdc,
+ enum ccdc_buftype buf_type)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ ccdc->ccdc_cfg.bayer.buf_type = buf_type;
+ else
+ ccdc->ccdc_cfg.ycbcr.buf_type = buf_type;
+
+ return 0;
+}
+
+static inline enum ccdc_buftype vpfe_ccdc_get_buftype(struct vpfe_ccdc *ccdc)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ return ccdc->ccdc_cfg.bayer.buf_type;
+
+ return ccdc->ccdc_cfg.ycbcr.buf_type;
+}
+
+static int vpfe_ccdc_set_pixel_format(struct vpfe_ccdc *ccdc, u32 pixfmt)
+{
+ struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc);
+
+ vpfe_dbg(1, vpfe, "vpfe_ccdc_set_pixel_format: if_type: %d, pixfmt:%s\n",
+ ccdc->ccdc_cfg.if_type, print_fourcc(pixfmt));
+
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+ ccdc->ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
+ /*
+ * Need to clear it in case it was left on
+ * after the last capture.
+ */
+ ccdc->ccdc_cfg.bayer.config_params.alaw.enable = 0;
+
+ switch (pixfmt) {
+ case V4L2_PIX_FMT_SBGGR8:
+ ccdc->ccdc_cfg.bayer.config_params.alaw.enable = 1;
+ break;
+
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_YUV420:
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_RGB565X:
+ break;
+
+ case V4L2_PIX_FMT_SBGGR16:
+ default:
+ return -EINVAL;
+ }
+ } else {
+ switch (pixfmt) {
+ case V4L2_PIX_FMT_YUYV:
+ ccdc->ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
+ break;
+
+ case V4L2_PIX_FMT_UYVY:
+ ccdc->ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static u32 vpfe_ccdc_get_pixel_format(struct vpfe_ccdc *ccdc)
+{
+ u32 pixfmt;
+
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+ pixfmt = V4L2_PIX_FMT_YUYV;
+ } else {
+ if (ccdc->ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
+ pixfmt = V4L2_PIX_FMT_YUYV;
+ else
+ pixfmt = V4L2_PIX_FMT_UYVY;
+ }
+
+ return pixfmt;
+}
+
+static int
+vpfe_ccdc_set_image_window(struct vpfe_ccdc *ccdc,
+ struct v4l2_rect *win, unsigned int bpp)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+ ccdc->ccdc_cfg.bayer.win = *win;
+ ccdc->ccdc_cfg.bayer.bytesperpixel = bpp;
+ ccdc->ccdc_cfg.bayer.bytesperline = ALIGN(win->width * bpp, 32);
+ } else {
+ ccdc->ccdc_cfg.ycbcr.win = *win;
+ ccdc->ccdc_cfg.ycbcr.bytesperpixel = bpp;
+ ccdc->ccdc_cfg.ycbcr.bytesperline = ALIGN(win->width * bpp, 32);
+ }
+
+ return 0;
+}
+
+static inline void
+vpfe_ccdc_get_image_window(struct vpfe_ccdc *ccdc,
+ struct v4l2_rect *win)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ *win = ccdc->ccdc_cfg.bayer.win;
+ else
+ *win = ccdc->ccdc_cfg.ycbcr.win;
+}
+
+static inline unsigned int vpfe_ccdc_get_line_length(struct vpfe_ccdc *ccdc)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ return ccdc->ccdc_cfg.bayer.bytesperline;
+
+ return ccdc->ccdc_cfg.ycbcr.bytesperline;
+}
+
+static inline int
+vpfe_ccdc_set_frame_format(struct vpfe_ccdc *ccdc,
+ enum ccdc_frmfmt frm_fmt)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ ccdc->ccdc_cfg.bayer.frm_fmt = frm_fmt;
+ else
+ ccdc->ccdc_cfg.ycbcr.frm_fmt = frm_fmt;
+
+ return 0;
+}
+
+static inline enum ccdc_frmfmt
+vpfe_ccdc_get_frame_format(struct vpfe_ccdc *ccdc)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ return ccdc->ccdc_cfg.bayer.frm_fmt;
+
+ return ccdc->ccdc_cfg.ycbcr.frm_fmt;
+}
+
+static inline int vpfe_ccdc_getfid(struct vpfe_ccdc *ccdc)
+{
+ return (vpfe_reg_read(ccdc, VPFE_SYNMODE) >> 15) & 1;
+}
+
+static inline void vpfe_set_sdr_addr(struct vpfe_ccdc *ccdc, unsigned long addr)
+{
+ vpfe_reg_write(ccdc, addr & 0xffffffe0, VPFE_SDR_ADDR);
+}
+
+static int vpfe_ccdc_set_hw_if_params(struct vpfe_ccdc *ccdc,
+ struct vpfe_hw_if_param *params)
+{
+ struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc);
+
+ ccdc->ccdc_cfg.if_type = params->if_type;
+
+ switch (params->if_type) {
+ case VPFE_BT656:
+ case VPFE_YCBCR_SYNC_16:
+ case VPFE_YCBCR_SYNC_8:
+ case VPFE_BT656_10BIT:
+ ccdc->ccdc_cfg.ycbcr.vd_pol = params->vdpol;
+ ccdc->ccdc_cfg.ycbcr.hd_pol = params->hdpol;
+ break;
+
+ case VPFE_RAW_BAYER:
+ ccdc->ccdc_cfg.bayer.vd_pol = params->vdpol;
+ ccdc->ccdc_cfg.bayer.hd_pol = params->hdpol;
+ if (params->bus_width == 10)
+ ccdc->ccdc_cfg.bayer.config_params.data_sz =
+ VPFE_CCDC_DATA_10BITS;
+ else
+ ccdc->ccdc_cfg.bayer.config_params.data_sz =
+ VPFE_CCDC_DATA_8BITS;
+ vpfe_dbg(1, vpfe, "params.bus_width: %d\n",
+ params->bus_width);
+ vpfe_dbg(1, vpfe, "config_params.data_sz: %d\n",
+ ccdc->ccdc_cfg.bayer.config_params.data_sz);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void vpfe_clear_intr(struct vpfe_ccdc *ccdc, int vdint)
+{
+ unsigned int vpfe_int_status;
+
+ vpfe_int_status = vpfe_reg_read(ccdc, VPFE_IRQ_STS);
+
+ switch (vdint) {
+ /* VD0 interrupt */
+ case VPFE_VDINT0:
+ vpfe_int_status &= ~VPFE_VDINT0;
+ vpfe_int_status |= VPFE_VDINT0;
+ break;
+
+ /* VD1 interrupt */
+ case VPFE_VDINT1:
+ vpfe_int_status &= ~VPFE_VDINT1;
+ vpfe_int_status |= VPFE_VDINT1;
+ break;
+
+ /* VD2 interrupt */
+ case VPFE_VDINT2:
+ vpfe_int_status &= ~VPFE_VDINT2;
+ vpfe_int_status |= VPFE_VDINT2;
+ break;
+
+ /* Clear all interrupts */
+ default:
+ vpfe_int_status &= ~(VPFE_VDINT0 |
+ VPFE_VDINT1 |
+ VPFE_VDINT2);
+ vpfe_int_status |= (VPFE_VDINT0 |
+ VPFE_VDINT1 |
+ VPFE_VDINT2);
+ break;
+ }
+ /* Clear specific VDINT from the status register */
+ vpfe_reg_write(ccdc, vpfe_int_status, VPFE_IRQ_STS);
+
+ vpfe_int_status = vpfe_reg_read(ccdc, VPFE_IRQ_STS);
+
+ /* Acknowledge that we are done with all interrupts */
+ vpfe_reg_write(ccdc, 1, VPFE_IRQ_EOI);
+}
+
+static void vpfe_ccdc_config_defaults(struct vpfe_ccdc *ccdc)
+{
+ ccdc->ccdc_cfg.if_type = VPFE_RAW_BAYER;
+
+ ccdc->ccdc_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT;
+ ccdc->ccdc_cfg.ycbcr.frm_fmt = CCDC_FRMFMT_INTERLACED;
+ ccdc->ccdc_cfg.ycbcr.fid_pol = VPFE_PINPOL_POSITIVE;
+ ccdc->ccdc_cfg.ycbcr.vd_pol = VPFE_PINPOL_POSITIVE;
+ ccdc->ccdc_cfg.ycbcr.hd_pol = VPFE_PINPOL_POSITIVE;
+ ccdc->ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+ ccdc->ccdc_cfg.ycbcr.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED;
+
+ ccdc->ccdc_cfg.ycbcr.win.left = 0;
+ ccdc->ccdc_cfg.ycbcr.win.top = 0;
+ ccdc->ccdc_cfg.ycbcr.win.width = 720;
+ ccdc->ccdc_cfg.ycbcr.win.height = 576;
+ ccdc->ccdc_cfg.ycbcr.bt656_enable = 1;
+
+ ccdc->ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
+ ccdc->ccdc_cfg.bayer.frm_fmt = CCDC_FRMFMT_PROGRESSIVE;
+ ccdc->ccdc_cfg.bayer.fid_pol = VPFE_PINPOL_POSITIVE;
+ ccdc->ccdc_cfg.bayer.vd_pol = VPFE_PINPOL_POSITIVE;
+ ccdc->ccdc_cfg.bayer.hd_pol = VPFE_PINPOL_POSITIVE;
+
+ ccdc->ccdc_cfg.bayer.win.left = 0;
+ ccdc->ccdc_cfg.bayer.win.top = 0;
+ ccdc->ccdc_cfg.bayer.win.width = 800;
+ ccdc->ccdc_cfg.bayer.win.height = 600;
+ ccdc->ccdc_cfg.bayer.config_params.data_sz = VPFE_CCDC_DATA_8BITS;
+ ccdc->ccdc_cfg.bayer.config_params.alaw.gamma_wd =
+ VPFE_CCDC_GAMMA_BITS_09_0;
+}
+
+/*
+ * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings
+ */
+static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe,
+ struct v4l2_format *f)
+{
+ struct v4l2_rect image_win;
+ enum ccdc_buftype buf_type;
+ enum ccdc_frmfmt frm_fmt;
+
+ memset(f, 0, sizeof(*f));
+ f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ vpfe_ccdc_get_image_window(&vpfe->ccdc, &image_win);
+ f->fmt.pix.width = image_win.width;
+ f->fmt.pix.height = image_win.height;
+ f->fmt.pix.bytesperline = vpfe_ccdc_get_line_length(&vpfe->ccdc);
+ f->fmt.pix.sizeimage = f->fmt.pix.bytesperline *
+ f->fmt.pix.height;
+ buf_type = vpfe_ccdc_get_buftype(&vpfe->ccdc);
+ f->fmt.pix.pixelformat = vpfe_ccdc_get_pixel_format(&vpfe->ccdc);
+ frm_fmt = vpfe_ccdc_get_frame_format(&vpfe->ccdc);
+
+ if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ } else if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+ if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) {
+ f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+ } else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED) {
+ f->fmt.pix.field = V4L2_FIELD_SEQ_TB;
+ } else {
+ vpfe_err(vpfe, "Invalid buf_type\n");
+ return -EINVAL;
+ }
+ } else {
+ vpfe_err(vpfe, "Invalid frm_fmt\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe)
+{
+ enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_config_ccdc_image_format\n");
+
+ vpfe_dbg(1, vpfe, "pixelformat: %s\n",
+ print_fourcc(vpfe->fmt.fmt.pix.pixelformat));
+
+ if (vpfe_ccdc_set_pixel_format(&vpfe->ccdc,
+ vpfe->fmt.fmt.pix.pixelformat) < 0) {
+ vpfe_err(vpfe, "couldn't set pix format in ccdc\n");
+ return -EINVAL;
+ }
+
+ /* configure the image window */
+ vpfe_ccdc_set_image_window(&vpfe->ccdc, &vpfe->crop, vpfe->bpp);
+
+ switch (vpfe->fmt.fmt.pix.field) {
+ case V4L2_FIELD_INTERLACED:
+ /* do nothing, since it is default */
+ ret = vpfe_ccdc_set_buftype(
+ &vpfe->ccdc,
+ CCDC_BUFTYPE_FLD_INTERLEAVED);
+ break;
+
+ case V4L2_FIELD_NONE:
+ frm_fmt = CCDC_FRMFMT_PROGRESSIVE;
+ /* buffer type only applicable for interlaced scan */
+ break;
+
+ case V4L2_FIELD_SEQ_TB:
+ ret = vpfe_ccdc_set_buftype(
+ &vpfe->ccdc,
+ CCDC_BUFTYPE_FLD_SEPARATED);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if (ret)
+ return ret;
+
+ return vpfe_ccdc_set_frame_format(&vpfe->ccdc, frm_fmt);
+}
+
+/*
+ * vpfe_config_image_format()
+ * For a given standard, this functions sets up the default
+ * pix format & crop values in the vpfe device and ccdc. It first
+ * starts with defaults based values from the standard table.
+ * It then checks if sub device support g_mbus_fmt and then override the
+ * values based on that.Sets crop values to match with scan resolution
+ * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the
+ * values in ccdc
+ */
+static int vpfe_config_image_format(struct vpfe_device *vpfe,
+ v4l2_std_id std_id)
+{
+ struct v4l2_pix_format *pix = &vpfe->fmt.fmt.pix;
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) {
+ if (vpfe_standards[i].std_id & std_id) {
+ vpfe->std_info.active_pixels =
+ vpfe_standards[i].width;
+ vpfe->std_info.active_lines =
+ vpfe_standards[i].height;
+ vpfe->std_info.frame_format =
+ vpfe_standards[i].frame_format;
+ vpfe->std_index = i;
+
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(vpfe_standards)) {
+ vpfe_err(vpfe, "standard not supported\n");
+ return -EINVAL;
+ }
+
+ vpfe->crop.top = vpfe->crop.left = 0;
+ vpfe->crop.width = vpfe->std_info.active_pixels;
+ vpfe->crop.height = vpfe->std_info.active_lines;
+ pix->width = vpfe->crop.width;
+ pix->height = vpfe->crop.height;
+ pix->pixelformat = V4L2_PIX_FMT_YUYV;
+
+ /* first field and frame format based on standard frame format */
+ if (vpfe->std_info.frame_format)
+ pix->field = V4L2_FIELD_INTERLACED;
+ else
+ pix->field = V4L2_FIELD_NONE;
+
+ ret = __vpfe_get_format(vpfe, &vpfe->fmt, &vpfe->bpp);
+ if (ret)
+ return ret;
+
+ /* Update the crop window based on found values */
+ vpfe->crop.width = pix->width;
+ vpfe->crop.height = pix->height;
+
+ return vpfe_config_ccdc_image_format(vpfe);
+}
+
+static int vpfe_initialize_device(struct vpfe_device *vpfe)
+{
+ struct vpfe_subdev_info *sdinfo;
+ int ret;
+
+ sdinfo = &vpfe->cfg->sub_devs[0];
+ sdinfo->sd = vpfe->sd[0];
+ vpfe->current_input = 0;
+ vpfe->std_index = 0;
+ /* Configure the default format information */
+ ret = vpfe_config_image_format(vpfe,
+ vpfe_standards[vpfe->std_index].std_id);
+ if (ret)
+ return ret;
+
+ pm_runtime_get_sync(vpfe->pdev);
+
+ vpfe_config_enable(&vpfe->ccdc, 1);
+
+ vpfe_ccdc_restore_defaults(&vpfe->ccdc);
+
+ /* Clear all VPFE interrupts */
+ vpfe_clear_intr(&vpfe->ccdc, -1);
+
+ return ret;
+}
+
+/*
+ * vpfe_release : This function is based on the vb2_fop_release
+ * helper function.
+ * It has been augmented to handle module power management,
+ * by disabling/enabling h/w module fcntl clock when necessary.
+ */
+static int vpfe_release(struct file *file)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ bool close = v4l2_fh_is_singular_file(file);
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_release\n");
+
+ mutex_lock(&vpfe->lock);
+
+ ret = _vb2_fop_release(file, NULL);
+ if (close)
+ vpfe_ccdc_close(&vpfe->ccdc, vpfe->pdev);
+
+ mutex_unlock(&vpfe->lock);
+
+ return ret;
+}
+
+/*
+ * vpfe_open : This function is based on the v4l2_fh_open helper function.
+ * It has been augmented to handle module power management,
+ * by disabling/enabling h/w module fcntl clock when necessary.
+ */
+static int vpfe_open(struct file *file)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ int ret;
+
+ ret = v4l2_fh_open(file);
+ if (ret) {
+ vpfe_err(vpfe, "v4l2_fh_open failed\n");
+ return ret;
+ }
+
+ mutex_lock(&vpfe->lock);
+
+ if (!v4l2_fh_is_singular_file(file))
+ goto unlock;
+
+ if (vpfe_initialize_device(vpfe)) {
+ v4l2_fh_release(file);
+ ret = -ENODEV;
+ }
+
+unlock:
+ mutex_unlock(&vpfe->lock);
+ return ret;
+}
+
+/**
+ * vpfe_schedule_next_buffer: set next buffer address for capture
+ * @vpfe : ptr to vpfe device
+ *
+ * This function will get next buffer from the dma queue and
+ * set the buffer address in the vpfe register for capture.
+ * the buffer is marked active
+ *
+ * Assumes caller is holding vpfe->dma_queue_lock already
+ */
+static inline void vpfe_schedule_next_buffer(struct vpfe_device *vpfe)
+{
+ vpfe->next_frm = list_entry(vpfe->dma_queue.next,
+ struct vpfe_cap_buffer, list);
+ list_del(&vpfe->next_frm->list);
+
+ vpfe_set_sdr_addr(&vpfe->ccdc,
+ vb2_dma_contig_plane_dma_addr(&vpfe->next_frm->vb, 0));
+}
+
+static inline void vpfe_schedule_bottom_field(struct vpfe_device *vpfe)
+{
+ unsigned long addr;
+
+ addr = vb2_dma_contig_plane_dma_addr(&vpfe->next_frm->vb, 0) +
+ vpfe->field_off;
+
+ vpfe_set_sdr_addr(&vpfe->ccdc, addr);
+}
+
+/*
+ * vpfe_process_buffer_complete: process a completed buffer
+ * @vpfe : ptr to vpfe device
+ *
+ * This function time stamp the buffer and mark it as DONE. It also
+ * wake up any process waiting on the QUEUE and set the next buffer
+ * as current
+ */
+static inline void vpfe_process_buffer_complete(struct vpfe_device *vpfe)
+{
+ v4l2_get_timestamp(&vpfe->cur_frm->vb.v4l2_buf.timestamp);
+ vpfe->cur_frm->vb.v4l2_buf.field = vpfe->fmt.fmt.pix.field;
+ vpfe->cur_frm->vb.v4l2_buf.sequence = vpfe->sequence++;
+ vb2_buffer_done(&vpfe->cur_frm->vb, VB2_BUF_STATE_DONE);
+ vpfe->cur_frm = vpfe->next_frm;
+}
+
+/*
+ * vpfe_isr : ISR handler for vpfe capture (VINT0)
+ * @irq: irq number
+ * @dev_id: dev_id ptr
+ *
+ * It changes status of the captured buffer, takes next buffer from the queue
+ * and sets its address in VPFE registers
+ */
+static irqreturn_t vpfe_isr(int irq, void *dev)
+{
+ struct vpfe_device *vpfe = (struct vpfe_device *)dev;
+ enum v4l2_field field;
+ int intr_status;
+ int fid;
+
+ intr_status = vpfe_reg_read(&vpfe->ccdc, VPFE_IRQ_STS);
+
+ if (intr_status & VPFE_VDINT0) {
+ field = vpfe->fmt.fmt.pix.field;
+
+ if (field == V4L2_FIELD_NONE) {
+ /* handle progressive frame capture */
+ if (vpfe->cur_frm != vpfe->next_frm)
+ vpfe_process_buffer_complete(vpfe);
+ goto next_intr;
+ }
+
+ /* interlaced or TB capture check which field
+ we are in hardware */
+ fid = vpfe_ccdc_getfid(&vpfe->ccdc);
+
+ /* switch the software maintained field id */
+ vpfe->field ^= 1;
+ if (fid == vpfe->field) {
+ /* we are in-sync here,continue */
+ if (fid == 0) {
+ /*
+ * One frame is just being captured. If the
+ * next frame is available, release the
+ * current frame and move on
+ */
+ if (vpfe->cur_frm != vpfe->next_frm)
+ vpfe_process_buffer_complete(vpfe);
+ /*
+ * based on whether the two fields are stored
+ * interleave or separately in memory,
+ * reconfigure the CCDC memory address
+ */
+ if (field == V4L2_FIELD_SEQ_TB)
+ vpfe_schedule_bottom_field(vpfe);
+
+ goto next_intr;
+ }
+ /*
+ * if one field is just being captured configure
+ * the next frame get the next frame from the empty
+ * queue if no frame is available hold on to the
+ * current buffer
+ */
+ spin_lock(&vpfe->dma_queue_lock);
+ if (!list_empty(&vpfe->dma_queue) &&
+ vpfe->cur_frm == vpfe->next_frm)
+ vpfe_schedule_next_buffer(vpfe);
+ spin_unlock(&vpfe->dma_queue_lock);
+ } else if (fid == 0) {
+ /*
+ * out of sync. Recover from any hardware out-of-sync.
+ * May loose one frame
+ */
+ vpfe->field = fid;
+ }
+ }
+
+next_intr:
+ if (intr_status & VPFE_VDINT1) {
+ spin_lock(&vpfe->dma_queue_lock);
+ if (vpfe->fmt.fmt.pix.field == V4L2_FIELD_NONE &&
+ !list_empty(&vpfe->dma_queue) &&
+ vpfe->cur_frm == vpfe->next_frm)
+ vpfe_schedule_next_buffer(vpfe);
+ spin_unlock(&vpfe->dma_queue_lock);
+ }
+
+ vpfe_clear_intr(&vpfe->ccdc, intr_status);
+
+ return IRQ_HANDLED;
+}
+
+static inline void vpfe_detach_irq(struct vpfe_device *vpfe)
+{
+ unsigned int intr = VPFE_VDINT0;
+ enum ccdc_frmfmt frame_format;
+
+ frame_format = vpfe_ccdc_get_frame_format(&vpfe->ccdc);
+ if (frame_format == CCDC_FRMFMT_PROGRESSIVE)
+ intr |= VPFE_VDINT1;
+
+ vpfe_reg_write(&vpfe->ccdc, intr, VPFE_IRQ_EN_CLR);
+}
+
+static inline void vpfe_attach_irq(struct vpfe_device *vpfe)
+{
+ unsigned int intr = VPFE_VDINT0;
+ enum ccdc_frmfmt frame_format;
+
+ frame_format = vpfe_ccdc_get_frame_format(&vpfe->ccdc);
+ if (frame_format == CCDC_FRMFMT_PROGRESSIVE)
+ intr |= VPFE_VDINT1;
+
+ vpfe_reg_write(&vpfe->ccdc, intr, VPFE_IRQ_EN_SET);
+}
+
+static int vpfe_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ vpfe_dbg(2, vpfe, "vpfe_querycap\n");
+
+ strlcpy(cap->driver, VPFE_MODULE_NAME, sizeof(cap->driver));
+ strlcpy(cap->card, "TI AM437x VPFE", sizeof(cap->card));
+ snprintf(cap->bus_info, sizeof(cap->bus_info),
+ "platform:%s", vpfe->v4l2_dev.name);
+ cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
+ V4L2_CAP_READWRITE;
+ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+
+ return 0;
+}
+
+/* get the format set at output pad of the adjacent subdev */
+static int __vpfe_get_format(struct vpfe_device *vpfe,
+ struct v4l2_format *format, unsigned int *bpp)
+{
+ struct v4l2_mbus_framefmt mbus_fmt;
+ struct vpfe_subdev_info *sdinfo;
+ struct v4l2_subdev_format fmt;
+ int ret;
+
+ sdinfo = vpfe->current_subdev;
+ if (!sdinfo->sd)
+ return -EINVAL;
+
+ fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ fmt.pad = 0;
+
+ ret = v4l2_subdev_call(sdinfo->sd, pad, get_fmt, NULL, &fmt);
+ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ return ret;
+
+ if (!ret) {
+ v4l2_fill_pix_format(&format->fmt.pix, &fmt.format);
+ mbus_to_pix(vpfe, &fmt.format, &format->fmt.pix, bpp);
+ } else {
+ ret = v4l2_device_call_until_err(&vpfe->v4l2_dev,
+ sdinfo->grp_id,
+ video, g_mbus_fmt,
+ &mbus_fmt);
+ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ return ret;
+ v4l2_fill_pix_format(&format->fmt.pix, &mbus_fmt);
+ mbus_to_pix(vpfe, &mbus_fmt, &format->fmt.pix, bpp);
+ }
+
+ format->type = vpfe->fmt.type;
+
+ vpfe_dbg(1, vpfe,
+ "%s size %dx%d (%s) bytesperline = %d, size = %d, bpp = %d\n",
+ __func__, format->fmt.pix.width, format->fmt.pix.height,
+ print_fourcc(format->fmt.pix.pixelformat),
+ format->fmt.pix.bytesperline, format->fmt.pix.sizeimage, *bpp);
+
+ return 0;
+}
+
+/* set the format at output pad of the adjacent subdev */
+static int __vpfe_set_format(struct vpfe_device *vpfe,
+ struct v4l2_format *format, unsigned int *bpp)
+{
+ struct v4l2_mbus_framefmt mbus_fmt;
+ struct vpfe_subdev_info *sdinfo;
+ struct v4l2_subdev_format fmt;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "__vpfe_set_format\n");
+
+ sdinfo = vpfe->current_subdev;
+ if (!sdinfo->sd)
+ return -EINVAL;
+
+ fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ fmt.pad = 0;
+
+ pix_to_mbus(vpfe, &format->fmt.pix, &fmt.format);
+
+ ret = v4l2_subdev_call(sdinfo->sd, pad, set_fmt, NULL, &fmt);
+ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ return ret;
+
+ if (!ret) {
+ v4l2_fill_pix_format(&format->fmt.pix, &fmt.format);
+ mbus_to_pix(vpfe, &fmt.format, &format->fmt.pix, bpp);
+ } else {
+ ret = v4l2_device_call_until_err(&vpfe->v4l2_dev,
+ sdinfo->grp_id,
+ video, s_mbus_fmt,
+ &mbus_fmt);
+ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ return ret;
+
+ v4l2_fill_pix_format(&format->fmt.pix, &mbus_fmt);
+ mbus_to_pix(vpfe, &mbus_fmt, &format->fmt.pix, bpp);
+ }
+
+ format->type = vpfe->fmt.type;
+
+ vpfe_dbg(1, vpfe,
+ "%s size %dx%d (%s) bytesperline = %d, size = %d, bpp = %d\n",
+ __func__, format->fmt.pix.width, format->fmt.pix.height,
+ print_fourcc(format->fmt.pix.pixelformat),
+ format->fmt.pix.bytesperline, format->fmt.pix.sizeimage, *bpp);
+
+ return 0;
+}
+
+static int vpfe_g_fmt(struct file *file, void *priv,
+ struct v4l2_format *fmt)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ vpfe_dbg(2, vpfe, "vpfe_g_fmt\n");
+
+ *fmt = vpfe->fmt;
+
+ return 0;
+}
+
+static int vpfe_enum_fmt(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+ struct vpfe_fmt *fmt = NULL;
+ unsigned int k;
+
+ vpfe_dbg(2, vpfe, "vpfe_enum_format index:%d\n",
+ f->index);
+
+ sdinfo = vpfe->current_subdev;
+ if (!sdinfo->sd)
+ return -EINVAL;
+
+ if (f->index > ARRAY_SIZE(formats))
+ return -EINVAL;
+
+ for (k = 0; k < ARRAY_SIZE(formats); k++) {
+ if (formats[k].index == f->index) {
+ fmt = &formats[k];
+ break;
+ }
+ }
+ if (!fmt)
+ return -EINVAL;
+
+ strncpy(f->description, fmt->name, sizeof(f->description) - 1);
+ f->pixelformat = fmt->fourcc;
+ f->type = vpfe->fmt.type;
+
+ vpfe_dbg(1, vpfe, "vpfe_enum_format: mbus index: %d code: %x pixelformat: %s [%s]\n",
+ f->index, fmt->code, print_fourcc(fmt->fourcc), fmt->name);
+
+ return 0;
+}
+
+static int vpfe_try_fmt(struct file *file, void *priv,
+ struct v4l2_format *fmt)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ unsigned int bpp;
+
+ vpfe_dbg(2, vpfe, "vpfe_try_fmt\n");
+
+ return __vpfe_get_format(vpfe, fmt, &bpp);
+}
+
+static int vpfe_s_fmt(struct file *file, void *priv,
+ struct v4l2_format *fmt)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct v4l2_format format;
+ unsigned int bpp;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_s_fmt\n");
+
+ /* If streaming is started, return error */
+ if (vb2_is_busy(&vpfe->buffer_queue)) {
+ vpfe_err(vpfe, "%s device busy\n", __func__);
+ return -EBUSY;
+ }
+
+ ret = vpfe_try_fmt(file, priv, fmt);
+ if (ret)
+ return ret;
+
+
+ if (!cmp_v4l2_format(fmt, &format)) {
+ /* Sensor format is different from the requested format
+ * so we need to change it
+ */
+ ret = __vpfe_set_format(vpfe, fmt, &bpp);
+ if (ret)
+ return ret;
+ } else /* Just make sure all of the fields are consistent */
+ *fmt = format;
+
+ /* First detach any IRQ if currently attached */
+ vpfe_detach_irq(vpfe);
+ vpfe->fmt = *fmt;
+ vpfe->bpp = bpp;
+
+ /* Update the crop window based on found values */
+ vpfe->crop.width = fmt->fmt.pix.width;
+ vpfe->crop.height = fmt->fmt.pix.height;
+
+ /* set image capture parameters in the ccdc */
+ return vpfe_config_ccdc_image_format(vpfe);
+}
+
+static int vpfe_enum_size(struct file *file, void *priv,
+ struct v4l2_frmsizeenum *fsize)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct v4l2_subdev_frame_size_enum fse;
+ struct vpfe_subdev_info *sdinfo;
+ struct v4l2_mbus_framefmt mbus;
+ struct v4l2_pix_format pix;
+ struct vpfe_fmt *fmt;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_enum_size\n");
+
+ /* check for valid format */
+ fmt = find_format_by_pix(fsize->pixel_format);
+ if (!fmt) {
+ vpfe_dbg(3, vpfe, "Invalid pixel code: %x, default used instead\n",
+ fsize->pixel_format);
+ return -EINVAL;
+ }
+
+ memset(fsize->reserved, 0x0, sizeof(fsize->reserved));
+
+ sdinfo = vpfe->current_subdev;
+ if (!sdinfo->sd)
+ return -EINVAL;
+
+ memset(&pix, 0x0, sizeof(pix));
+ /* Construct pix from parameter and use default for the rest */
+ pix.pixelformat = fsize->pixel_format;
+ pix.width = 640;
+ pix.height = 480;
+ pix.colorspace = V4L2_COLORSPACE_SRGB;
+ pix.field = V4L2_FIELD_NONE;
+ pix_to_mbus(vpfe, &pix, &mbus);
+
+ memset(&fse, 0x0, sizeof(fse));
+ fse.index = fsize->index;
+ fse.pad = 0;
+ fse.code = mbus.code;
+ ret = v4l2_subdev_call(sdinfo->sd, pad, enum_frame_size, NULL, &fse);
+ if (ret)
+ return -EINVAL;
+
+ vpfe_dbg(1, vpfe, "vpfe_enum_size: index: %d code: %x W:[%d,%d] H:[%d,%d]\n",
+ fse.index, fse.code, fse.min_width, fse.max_width,
+ fse.min_height, fse.max_height);
+
+ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+ fsize->discrete.width = fse.max_width;
+ fsize->discrete.height = fse.max_height;
+
+ vpfe_dbg(1, vpfe, "vpfe_enum_size: index: %d pixformat: %s size: %dx%d\n",
+ fsize->index, print_fourcc(fsize->pixel_format),
+ fsize->discrete.width, fsize->discrete.height);
+
+ return 0;
+}
+
+/*
+ * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a
+ * given app input index
+ */
+static int
+vpfe_get_subdev_input_index(struct vpfe_device *vpfe,
+ int *subdev_index,
+ int *subdev_input_index,
+ int app_input_index)
+{
+ struct vpfe_config *cfg = vpfe->cfg;
+ struct vpfe_subdev_info *sdinfo;
+ int i, j = 0;
+
+ for (i = 0; i < ARRAY_SIZE(vpfe->cfg->asd); i++) {
+ sdinfo = &cfg->sub_devs[i];
+ if (app_input_index < (j + 1)) {
+ *subdev_index = i;
+ *subdev_input_index = app_input_index - j;
+ return 0;
+ }
+ j++;
+ }
+ return -EINVAL;
+}
+
+/*
+ * vpfe_get_app_input - Get app input index for a given subdev input index
+ * driver stores the input index of the current sub device and translate it
+ * when application request the current input
+ */
+static int vpfe_get_app_input_index(struct vpfe_device *vpfe,
+ int *app_input_index)
+{
+ struct vpfe_config *cfg = vpfe->cfg;
+ struct vpfe_subdev_info *sdinfo;
+ int i, j = 0;
+
+ for (i = 0; i < ARRAY_SIZE(vpfe->cfg->asd); i++) {
+ sdinfo = &cfg->sub_devs[i];
+ if (!strcmp(sdinfo->name, vpfe->current_subdev->name)) {
+ if (vpfe->current_input >= 1)
+ return -1;
+ *app_input_index = j + vpfe->current_input;
+ return 0;
+ }
+ j++;
+ }
+ return -EINVAL;
+}
+
+static int vpfe_enum_input(struct file *file, void *priv,
+ struct v4l2_input *inp)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+ int subdev, index;
+
+ vpfe_dbg(2, vpfe, "vpfe_enum_input\n");
+
+ if (vpfe_get_subdev_input_index(vpfe, &subdev, &index,
+ inp->index) < 0) {
+ vpfe_dbg(1, vpfe,
+ "input information not found for the subdev\n");
+ return -EINVAL;
+ }
+ sdinfo = &vpfe->cfg->sub_devs[subdev];
+ *inp = sdinfo->inputs[index];
+
+ return 0;
+}
+
+static int vpfe_g_input(struct file *file, void *priv, unsigned int *index)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ vpfe_dbg(2, vpfe, "vpfe_g_input\n");
+
+ return vpfe_get_app_input_index(vpfe, index);
+}
+
+/* Assumes caller is holding vpfe_dev->lock */
+static int vpfe_set_input(struct vpfe_device *vpfe, unsigned int index)
+{
+ int subdev_index = 0, inp_index = 0;
+ struct vpfe_subdev_info *sdinfo;
+ struct vpfe_route *route;
+ u32 input, output;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_set_input: index: %d\n", index);
+
+ /* If streaming is started, return error */
+ if (vb2_is_busy(&vpfe->buffer_queue)) {
+ vpfe_err(vpfe, "%s device busy\n", __func__);
+ return -EBUSY;
+ }
+ ret = vpfe_get_subdev_input_index(vpfe,
+ &subdev_index,
+ &inp_index,
+ index);
+ if (ret < 0) {
+ vpfe_err(vpfe, "invalid input index: %d\n", index);
+ goto get_out;
+ }
+
+ sdinfo = &vpfe->cfg->sub_devs[subdev_index];
+ sdinfo->sd = vpfe->sd[subdev_index];
+ route = &sdinfo->routes[inp_index];
+ if (route && sdinfo->can_route) {
+ input = route->input;
+ output = route->output;
+ if (sdinfo->sd) {
+ ret = v4l2_subdev_call(sdinfo->sd, video,
+ s_routing, input, output, 0);
+ if (ret) {
+ vpfe_err(vpfe, "s_routing failed\n");
+ ret = -EINVAL;
+ goto get_out;
+ }
+ }
+
+ }
+
+ vpfe->current_subdev = sdinfo;
+ if (sdinfo->sd)
+ vpfe->v4l2_dev.ctrl_handler = sdinfo->sd->ctrl_handler;
+ vpfe->current_input = index;
+ vpfe->std_index = 0;
+
+ /* set the bus/interface parameter for the sub device in ccdc */
+ ret = vpfe_ccdc_set_hw_if_params(&vpfe->ccdc, &sdinfo->vpfe_param);
+ if (ret)
+ return ret;
+
+ /* set the default image parameters in the device */
+ return vpfe_config_image_format(vpfe,
+ vpfe_standards[vpfe->std_index].std_id);
+
+get_out:
+ return ret;
+}
+
+static int vpfe_s_input(struct file *file, void *priv, unsigned int index)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ vpfe_dbg(2, vpfe,
+ "vpfe_s_input: index: %d\n", index);
+
+ return vpfe_set_input(vpfe, index);
+}
+
+static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+
+ vpfe_dbg(2, vpfe, "vpfe_querystd\n");
+
+ sdinfo = vpfe->current_subdev;
+ if (!(sdinfo->inputs[0].capabilities & V4L2_IN_CAP_STD))
+ return -ENODATA;
+
+ /* Call querystd function of decoder device */
+ return v4l2_device_call_until_err(&vpfe->v4l2_dev, sdinfo->grp_id,
+ video, querystd, std_id);
+}
+
+static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_s_std\n");
+
+ sdinfo = vpfe->current_subdev;
+ if (!(sdinfo->inputs[0].capabilities & V4L2_IN_CAP_STD))
+ return -ENODATA;
+
+ /* If streaming is started, return error */
+ if (vb2_is_busy(&vpfe->buffer_queue)) {
+ vpfe_err(vpfe, "%s device busy\n", __func__);
+ ret = -EBUSY;
+ return ret;
+ }
+
+ ret = v4l2_device_call_until_err(&vpfe->v4l2_dev, sdinfo->grp_id,
+ video, s_std, std_id);
+ if (ret < 0) {
+ vpfe_err(vpfe, "Failed to set standard\n");
+ return ret;
+ }
+ ret = vpfe_config_image_format(vpfe, std_id);
+
+ return ret;
+}
+
+static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+
+ vpfe_dbg(2, vpfe, "vpfe_g_std\n");
+
+ sdinfo = vpfe->current_subdev;
+ if (sdinfo->inputs[0].capabilities != V4L2_IN_CAP_STD)
+ return -ENODATA;
+
+ *std_id = vpfe_standards[vpfe->std_index].std_id;
+
+ return 0;
+}
+
+/*
+ * vpfe_calculate_offsets : This function calculates buffers offset
+ * for top and bottom field
+ */
+static void vpfe_calculate_offsets(struct vpfe_device *vpfe)
+{
+ struct v4l2_rect image_win;
+
+ vpfe_dbg(2, vpfe, "vpfe_calculate_offsets\n");
+
+ vpfe_ccdc_get_image_window(&vpfe->ccdc, &image_win);
+ vpfe->field_off = image_win.height * image_win.width;
+}
+
+/*
+ * vpfe_queue_setup - Callback function for buffer setup.
+ * @vq: vb2_queue ptr
+ * @fmt: v4l2 format
+ * @nbuffers: ptr to number of buffers requested by application
+ * @nplanes:: contains number of distinct video planes needed to hold a frame
+ * @sizes[]: contains the size (in bytes) of each plane.
+ * @alloc_ctxs: ptr to allocation context
+ *
+ * This callback function is called when reqbuf() is called to adjust
+ * the buffer count and buffer size
+ */
+static int vpfe_queue_setup(struct vb2_queue *vq,
+ const struct v4l2_format *fmt,
+ unsigned int *nbuffers, unsigned int *nplanes,
+ unsigned int sizes[], void *alloc_ctxs[])
+{
+ struct vpfe_device *vpfe = vb2_get_drv_priv(vq);
+
+ if (fmt && fmt->fmt.pix.sizeimage < vpfe->fmt.fmt.pix.sizeimage)
+ return -EINVAL;
+
+ if (vq->num_buffers + *nbuffers < 3)
+ *nbuffers = 3 - vq->num_buffers;
+
+ *nplanes = 1;
+ sizes[0] = fmt ? fmt->fmt.pix.sizeimage : vpfe->fmt.fmt.pix.sizeimage;
+ alloc_ctxs[0] = vpfe->alloc_ctx;
+
+ vpfe_dbg(1, vpfe,
+ "nbuffers=%d, size=%u\n", *nbuffers, sizes[0]);
+
+ /* Calculate field offset */
+ vpfe_calculate_offsets(vpfe);
+
+ return 0;
+}
+
+/*
+ * vpfe_buffer_prepare : callback function for buffer prepare
+ * @vb: ptr to vb2_buffer
+ *
+ * This is the callback function for buffer prepare when vb2_qbuf()
+ * function is called. The buffer is prepared and user space virtual address
+ * or user address is converted into physical address
+ */
+static int vpfe_buffer_prepare(struct vb2_buffer *vb)
+{
+ struct vpfe_device *vpfe = vb2_get_drv_priv(vb->vb2_queue);
+
+ vb2_set_plane_payload(vb, 0, vpfe->fmt.fmt.pix.sizeimage);
+
+ if (vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0))
+ return -EINVAL;
+
+ vb->v4l2_buf.field = vpfe->fmt.fmt.pix.field;
+
+ return 0;
+}
+
+/*
+ * vpfe_buffer_queue : Callback function to add buffer to DMA queue
+ * @vb: ptr to vb2_buffer
+ */
+static void vpfe_buffer_queue(struct vb2_buffer *vb)
+{
+ struct vpfe_device *vpfe = vb2_get_drv_priv(vb->vb2_queue);
+ struct vpfe_cap_buffer *buf = to_vpfe_buffer(vb);
+ unsigned long flags = 0;
+
+ /* add the buffer to the DMA queue */
+ spin_lock_irqsave(&vpfe->dma_queue_lock, flags);
+ list_add_tail(&buf->list, &vpfe->dma_queue);
+ spin_unlock_irqrestore(&vpfe->dma_queue_lock, flags);
+}
+
+/*
+ * vpfe_start_streaming : Starts the DMA engine for streaming
+ * @vb: ptr to vb2_buffer
+ * @count: number of buffers
+ */
+static int vpfe_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+ struct vpfe_device *vpfe = vb2_get_drv_priv(vq);
+ struct vpfe_cap_buffer *buf, *tmp;
+ struct vpfe_subdev_info *sdinfo;
+ unsigned long flags;
+ unsigned long addr;
+ int ret;
+
+ spin_lock_irqsave(&vpfe->dma_queue_lock, flags);
+
+ vpfe->field = 0;
+ vpfe->sequence = 0;
+
+ sdinfo = vpfe->current_subdev;
+
+ vpfe_attach_irq(vpfe);
+
+ if (vpfe->ccdc.ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ vpfe_ccdc_config_raw(&vpfe->ccdc);
+ else
+ vpfe_ccdc_config_ycbcr(&vpfe->ccdc);
+
+ /* Get the next frame from the buffer queue */
+ vpfe->next_frm = list_entry(vpfe->dma_queue.next,
+ struct vpfe_cap_buffer, list);
+ vpfe->cur_frm = vpfe->next_frm;
+ /* Remove buffer from the buffer queue */
+ list_del(&vpfe->cur_frm->list);
+ spin_unlock_irqrestore(&vpfe->dma_queue_lock, flags);
+
+ addr = vb2_dma_contig_plane_dma_addr(&vpfe->cur_frm->vb, 0);
+
+ vpfe_set_sdr_addr(&vpfe->ccdc, (unsigned long)(addr));
+
+ vpfe_pcr_enable(&vpfe->ccdc, 1);
+
+ ret = v4l2_subdev_call(sdinfo->sd, video, s_stream, 1);
+ if (ret < 0) {
+ vpfe_err(vpfe, "Error in attaching interrupt handle\n");
+ goto err;
+ }
+
+ return 0;
+
+err:
+ list_for_each_entry_safe(buf, tmp, &vpfe->dma_queue, list) {
+ list_del(&buf->list);
+ vb2_buffer_done(&buf->vb, VB2_BUF_STATE_QUEUED);
+ }
+ spin_unlock_irqrestore(&vpfe->dma_queue_lock, flags);
+
+ return ret;
+}
+
+/*
+ * vpfe_stop_streaming : Stop the DMA engine
+ * @vq: ptr to vb2_queue
+ *
+ * This callback stops the DMA engine and any remaining buffers
+ * in the DMA queue are released.
+ */
+static void vpfe_stop_streaming(struct vb2_queue *vq)
+{
+ struct vpfe_device *vpfe = vb2_get_drv_priv(vq);
+ struct vpfe_subdev_info *sdinfo;
+ unsigned long flags;
+ int ret;
+
+ vpfe_pcr_enable(&vpfe->ccdc, 0);
+
+ vpfe_detach_irq(vpfe);
+
+ sdinfo = vpfe->current_subdev;
+ ret = v4l2_subdev_call(sdinfo->sd, video, s_stream, 0);
+ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ vpfe_dbg(1, vpfe, "stream off failed in subdev\n");
+
+ /* release all active buffers */
+ spin_lock_irqsave(&vpfe->dma_queue_lock, flags);
+ if (vpfe->cur_frm == vpfe->next_frm) {
+ vb2_buffer_done(&vpfe->cur_frm->vb, VB2_BUF_STATE_ERROR);
+ } else {
+ if (vpfe->cur_frm != NULL)
+ vb2_buffer_done(&vpfe->cur_frm->vb,
+ VB2_BUF_STATE_ERROR);
+ if (vpfe->next_frm != NULL)
+ vb2_buffer_done(&vpfe->next_frm->vb,
+ VB2_BUF_STATE_ERROR);
+ }
+
+ while (!list_empty(&vpfe->dma_queue)) {
+ vpfe->next_frm = list_entry(vpfe->dma_queue.next,
+ struct vpfe_cap_buffer, list);
+ list_del(&vpfe->next_frm->list);
+ vb2_buffer_done(&vpfe->next_frm->vb, VB2_BUF_STATE_ERROR);
+ }
+ spin_unlock_irqrestore(&vpfe->dma_queue_lock, flags);
+}
+
+static int vpfe_cropcap(struct file *file, void *priv,
+ struct v4l2_cropcap *crop)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ vpfe_dbg(2, vpfe, "vpfe_cropcap\n");
+
+ if (vpfe->std_index >= ARRAY_SIZE(vpfe_standards))
+ return -EINVAL;
+
+ memset(crop, 0, sizeof(struct v4l2_cropcap));
+
+ crop->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ crop->defrect.width = vpfe_standards[vpfe->std_index].width;
+ crop->bounds.width = crop->defrect.width;
+ crop->defrect.height = vpfe_standards[vpfe->std_index].height;
+ crop->bounds.height = crop->defrect.height;
+ crop->pixelaspect = vpfe_standards[vpfe->std_index].pixelaspect;
+
+ return 0;
+}
+
+static int
+vpfe_g_selection(struct file *file, void *fh, struct v4l2_selection *s)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ switch (s->target) {
+ case V4L2_SEL_TGT_CROP_BOUNDS:
+ case V4L2_SEL_TGT_CROP_DEFAULT:
+ s->r.left = s->r.top = 0;
+ s->r.width = vpfe->crop.width;
+ s->r.height = vpfe->crop.height;
+ break;
+
+ case V4L2_SEL_TGT_CROP:
+ s->r = vpfe->crop;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int enclosed_rectangle(struct v4l2_rect *a, struct v4l2_rect *b)
+{
+ if (a->left < b->left || a->top < b->top)
+ return 0;
+
+ if (a->left + a->width > b->left + b->width)
+ return 0;
+
+ if (a->top + a->height > b->top + b->height)
+ return 0;
+
+ return 1;
+}
+
+static int
+vpfe_s_selection(struct file *file, void *fh, struct v4l2_selection *s)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct v4l2_rect cr = vpfe->crop;
+ struct v4l2_rect r = s->r;
+
+ /* If streaming is started, return error */
+ if (vb2_is_busy(&vpfe->buffer_queue)) {
+ vpfe_err(vpfe, "%s device busy\n", __func__);
+ return -EBUSY;
+ }
+
+ if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ s->target != V4L2_SEL_TGT_CROP)
+ return -EINVAL;
+
+ v4l_bound_align_image(&r.width, 0, cr.width, 0,
+ &r.height, 0, cr.height, 0, 0);
+
+ r.left = clamp_t(unsigned int, r.left, 0, cr.width - r.width);
+ r.top = clamp_t(unsigned int, r.top, 0, cr.height - r.height);
+
+ if (s->flags & V4L2_SEL_FLAG_LE && !enclosed_rectangle(&r, &s->r))
+ return -ERANGE;
+
+ if (s->flags & V4L2_SEL_FLAG_GE && !enclosed_rectangle(&s->r, &r))
+ return -ERANGE;
+
+ s->r = vpfe->crop = r;
+
+ vpfe_ccdc_set_image_window(&vpfe->ccdc, &r, vpfe->bpp);
+ vpfe->fmt.fmt.pix.width = r.width;
+ vpfe->fmt.fmt.pix.height = r.height;
+ vpfe->fmt.fmt.pix.bytesperline = vpfe_ccdc_get_line_length(&vpfe->ccdc);
+ vpfe->fmt.fmt.pix.sizeimage = vpfe->fmt.fmt.pix.bytesperline *
+ vpfe->fmt.fmt.pix.height;
+
+ vpfe_dbg(1, vpfe, "cropped (%d,%d)/%dx%d of %dx%d\n",
+ r.left, r.top, r.width, r.height, cr.width, cr.height);
+
+ return 0;
+}
+
+static long vpfe_ioctl_default(struct file *file, void *priv,
+ bool valid_prio, unsigned int cmd, void *param)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_ioctl_default\n");
+
+ if (!valid_prio) {
+ vpfe_err(vpfe, "%s device busy\n", __func__);
+ return -EBUSY;
+ }
+
+ /* If streaming is started, return error */
+ if (vb2_is_busy(&vpfe->buffer_queue)) {
+ vpfe_err(vpfe, "%s device busy\n", __func__);
+ return -EBUSY;
+ }
+
+ switch (cmd) {
+ case VIDIOC_AM437X_CCDC_CFG:
+ ret = vpfe_ccdc_set_params(&vpfe->ccdc, param);
+ if (ret) {
+ vpfe_dbg(2, vpfe,
+ "Error setting parameters in CCDC\n");
+ return ret;
+ }
+ ret = vpfe_get_ccdc_image_format(vpfe,
+ &vpfe->fmt);
+ if (ret < 0) {
+ vpfe_dbg(2, vpfe,
+ "Invalid image format at CCDC\n");
+ return ret;
+ }
+ break;
+
+ default:
+ ret = -ENOTTY;
+ break;
+ }
+
+ return ret;
+}
+
+static const struct vb2_ops vpfe_video_qops = {
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+ .queue_setup = vpfe_queue_setup,
+ .buf_prepare = vpfe_buffer_prepare,
+ .buf_queue = vpfe_buffer_queue,
+ .start_streaming = vpfe_start_streaming,
+ .stop_streaming = vpfe_stop_streaming,
+};
+
+/* vpfe capture driver file operations */
+static const struct v4l2_file_operations vpfe_fops = {
+ .owner = THIS_MODULE,
+ .open = vpfe_open,
+ .release = vpfe_release,
+ .read = vb2_fop_read,
+ .poll = vb2_fop_poll,
+ .unlocked_ioctl = video_ioctl2,
+ .mmap = vb2_fop_mmap,
+};
+
+/* vpfe capture ioctl operations */
+static const struct v4l2_ioctl_ops vpfe_ioctl_ops = {
+ .vidioc_querycap = vpfe_querycap,
+ .vidioc_enum_fmt_vid_cap = vpfe_enum_fmt,
+ .vidioc_g_fmt_vid_cap = vpfe_g_fmt,
+ .vidioc_s_fmt_vid_cap = vpfe_s_fmt,
+ .vidioc_try_fmt_vid_cap = vpfe_try_fmt,
+
+ .vidioc_enum_framesizes = vpfe_enum_size,
+
+ .vidioc_enum_input = vpfe_enum_input,
+ .vidioc_g_input = vpfe_g_input,
+ .vidioc_s_input = vpfe_s_input,
+
+ .vidioc_querystd = vpfe_querystd,
+ .vidioc_s_std = vpfe_s_std,
+ .vidioc_g_std = vpfe_g_std,
+
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+
+ .vidioc_log_status = v4l2_ctrl_log_status,
+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+
+ .vidioc_cropcap = vpfe_cropcap,
+ .vidioc_g_selection = vpfe_g_selection,
+ .vidioc_s_selection = vpfe_s_selection,
+
+ .vidioc_default = vpfe_ioctl_default,
+};
+
+static int
+vpfe_async_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct vpfe_device *vpfe = container_of(notifier->v4l2_dev,
+ struct vpfe_device, v4l2_dev);
+ struct v4l2_subdev_mbus_code_enum mbus_code;
+ struct vpfe_subdev_info *sdinfo;
+ bool found = false;
+ int i, j;
+
+ vpfe_dbg(1, vpfe, "vpfe_async_bound\n");
+
+ for (i = 0; i < ARRAY_SIZE(vpfe->cfg->asd); i++) {
+ sdinfo = &vpfe->cfg->sub_devs[i];
+
+ if (!strcmp(sdinfo->name, subdev->name)) {
+ vpfe->sd[i] = subdev;
+ vpfe_info(vpfe,
+ "v4l2 sub device %s registered\n",
+ subdev->name);
+ vpfe->sd[i]->grp_id =
+ sdinfo->grp_id;
+ /* update tvnorms from the sub devices */
+ for (j = 0; j < 1; j++)
+ vpfe->video_dev->tvnorms |=
+ sdinfo->inputs[j].std;
+
+ found = true;
+ break;
+ }
+ }
+
+ if (!found) {
+ vpfe_info(vpfe, "sub device (%s) not matched\n", subdev->name);
+ return -EINVAL;
+ }
+
+ /* setup the supported formats & indexes */
+ for (j = 0, i = 0; ; ++j) {
+ struct vpfe_fmt *fmt;
+ int ret;
+
+ memset(&mbus_code, 0, sizeof(mbus_code));
+ mbus_code.index = j;
+ ret = v4l2_subdev_call(subdev, pad, enum_mbus_code,
+ NULL, &mbus_code);
+ if (ret)
+ break;
+
+ fmt = find_format_by_code(mbus_code.code);
+ if (!fmt)
+ continue;
+
+ fmt->supported = true;
+ fmt->index = i++;
+ }
+
+ return 0;
+}
+
+static int vpfe_probe_complete(struct vpfe_device *vpfe)
+{
+ struct video_device *vdev;
+ struct vb2_queue *q;
+ int err;
+
+ spin_lock_init(&vpfe->dma_queue_lock);
+ mutex_init(&vpfe->lock);
+
+ vpfe->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+ /* set first sub device as current one */
+ vpfe->current_subdev = &vpfe->cfg->sub_devs[0];
+ vpfe->v4l2_dev.ctrl_handler = vpfe->sd[0]->ctrl_handler;
+
+ err = vpfe_set_input(vpfe, 0);
+ if (err)
+ goto probe_out;
+
+ /* Initialize videobuf2 queue as per the buffer type */
+ vpfe->alloc_ctx = vb2_dma_contig_init_ctx(vpfe->pdev);
+ if (IS_ERR(vpfe->alloc_ctx)) {
+ vpfe_err(vpfe, "Failed to get the context\n");
+ err = PTR_ERR(vpfe->alloc_ctx);
+ goto probe_out;
+ }
+
+ q = &vpfe->buffer_queue;
+ q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
+ q->drv_priv = vpfe;
+ q->ops = &vpfe_video_qops;
+ q->mem_ops = &vb2_dma_contig_memops;
+ q->buf_struct_size = sizeof(struct vpfe_cap_buffer);
+ q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ q->lock = &vpfe->lock;
+ q->min_buffers_needed = 1;
+
+ err = vb2_queue_init(q);
+ if (err) {
+ vpfe_err(vpfe, "vb2_queue_init() failed\n");
+ vb2_dma_contig_cleanup_ctx(vpfe->alloc_ctx);
+ goto probe_out;
+ }
+
+ INIT_LIST_HEAD(&vpfe->dma_queue);
+
+ vdev = vpfe->video_dev;
+ strlcpy(vdev->name, VPFE_MODULE_NAME, sizeof(vdev->name));
+ vdev->release = video_device_release;
+ vdev->fops = &vpfe_fops;
+ vdev->ioctl_ops = &vpfe_ioctl_ops;
+ vdev->v4l2_dev = &vpfe->v4l2_dev;
+ vdev->vfl_dir = VFL_DIR_RX;
+ vdev->queue = q;
+ vdev->lock = &vpfe->lock;
+ video_set_drvdata(vdev, vpfe);
+ err = video_register_device(vpfe->video_dev, VFL_TYPE_GRABBER, -1);
+ if (err) {
+ vpfe_err(vpfe,
+ "Unable to register video device.\n");
+ goto probe_out;
+ }
+
+ return 0;
+
+probe_out:
+ v4l2_device_unregister(&vpfe->v4l2_dev);
+ return err;
+}
+
+static int vpfe_async_complete(struct v4l2_async_notifier *notifier)
+{
+ struct vpfe_device *vpfe = container_of(notifier->v4l2_dev,
+ struct vpfe_device, v4l2_dev);
+
+ return vpfe_probe_complete(vpfe);
+}
+
+static struct vpfe_config *
+vpfe_get_pdata(struct platform_device *pdev)
+{
+ struct device_node *endpoint = NULL, *rem = NULL;
+ struct v4l2_of_endpoint bus_cfg;
+ struct vpfe_subdev_info *sdinfo;
+ struct vpfe_config *pdata;
+ unsigned int flags;
+ unsigned int i;
+ int err;
+
+ dev_dbg(&pdev->dev, "vpfe_get_pdata\n");
+
+ if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node)
+ return pdev->dev.platform_data;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ for (i = 0; ; i++) {
+ endpoint = of_graph_get_next_endpoint(pdev->dev.of_node,
+ endpoint);
+ if (!endpoint)
+ break;
+
+ sdinfo = &pdata->sub_devs[i];
+ sdinfo->grp_id = 0;
+
+ /* we only support camera */
+ sdinfo->inputs[0].index = i;
+ strcpy(sdinfo->inputs[0].name, "Camera");
+ sdinfo->inputs[0].type = V4L2_INPUT_TYPE_CAMERA;
+ sdinfo->inputs[0].std = V4L2_STD_ALL;
+ sdinfo->inputs[0].capabilities = V4L2_IN_CAP_STD;
+
+ sdinfo->can_route = 0;
+ sdinfo->routes = NULL;
+
+ of_property_read_u32(endpoint, "ti,am437x-vpfe-interface",
+ &sdinfo->vpfe_param.if_type);
+ if (sdinfo->vpfe_param.if_type < 0 ||
+ sdinfo->vpfe_param.if_type > 4) {
+ sdinfo->vpfe_param.if_type = VPFE_RAW_BAYER;
+ }
+
+ err = v4l2_of_parse_endpoint(endpoint, &bus_cfg);
+ if (err) {
+ dev_err(&pdev->dev, "Could not parse the endpoint\n");
+ goto done;
+ }
+
+ sdinfo->vpfe_param.bus_width = bus_cfg.bus.parallel.bus_width;
+
+ if (sdinfo->vpfe_param.bus_width < 8 ||
+ sdinfo->vpfe_param.bus_width > 16) {
+ dev_err(&pdev->dev, "Invalid bus width.\n");
+ goto done;
+ }
+
+ flags = bus_cfg.bus.parallel.flags;
+
+ if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
+ sdinfo->vpfe_param.hdpol = 1;
+
+ if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
+ sdinfo->vpfe_param.vdpol = 1;
+
+ rem = of_graph_get_remote_port_parent(endpoint);
+ if (!rem) {
+ dev_err(&pdev->dev, "Remote device at %s not found\n",
+ endpoint->full_name);
+ goto done;
+ }
+
+ strncpy(sdinfo->name, rem->name, sizeof(sdinfo->name));
+
+ pdata->asd[i] = devm_kzalloc(&pdev->dev,
+ sizeof(struct v4l2_async_subdev),
+ GFP_KERNEL);
+ pdata->asd[i]->match_type = V4L2_ASYNC_MATCH_OF;
+ pdata->asd[i]->match.of.node = rem;
+ of_node_put(endpoint);
+ of_node_put(rem);
+ }
+
+ of_node_put(endpoint);
+ return pdata;
+
+done:
+ of_node_put(endpoint);
+ of_node_put(rem);
+ return NULL;
+}
+
+/*
+ * vpfe_probe : This function creates device entries by register
+ * itself to the V4L2 driver and initializes fields of each
+ * device objects
+ */
+static int vpfe_probe(struct platform_device *pdev)
+{
+ struct vpfe_config *vpfe_cfg = vpfe_get_pdata(pdev);
+ struct vpfe_device *vpfe;
+ struct vpfe_ccdc *ccdc;
+ struct resource *res;
+ int ret;
+
+ if (!vpfe_cfg) {
+ dev_err(&pdev->dev, "No platform data\n");
+ return -EINVAL;
+ }
+
+ vpfe = devm_kzalloc(&pdev->dev, sizeof(*vpfe), GFP_KERNEL);
+ if (!vpfe)
+ return -ENOMEM;
+
+ vpfe->pdev = &pdev->dev;
+ vpfe->cfg = vpfe_cfg;
+ ccdc = &vpfe->ccdc;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ccdc->ccdc_cfg.base_addr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ccdc->ccdc_cfg.base_addr))
+ return PTR_ERR(ccdc->ccdc_cfg.base_addr);
+
+ vpfe->irq = platform_get_irq(pdev, 0);
+ if (vpfe->irq <= 0) {
+ dev_err(&pdev->dev, "No IRQ resource\n");
+ return -ENODEV;
+ }
+
+ ret = devm_request_irq(vpfe->pdev, vpfe->irq, vpfe_isr, 0,
+ "vpfe_capture0", vpfe);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to request interrupt\n");
+ return -EINVAL;
+ }
+
+ vpfe->video_dev = video_device_alloc();
+ if (!vpfe->video_dev) {
+ dev_err(&pdev->dev, "Unable to allocate video device\n");
+ return -ENOMEM;
+ }
+
+ ret = v4l2_device_register(&pdev->dev, &vpfe->v4l2_dev);
+ if (ret) {
+ vpfe_err(vpfe,
+ "Unable to register v4l2 device.\n");
+ goto probe_out_video_release;
+ }
+
+ /* set the driver data in platform device */
+ platform_set_drvdata(pdev, vpfe);
+ /* Enabling module functional clock */
+ pm_runtime_enable(&pdev->dev);
+
+ /* for now just enable it here instead of waiting for the open */
+ pm_runtime_get_sync(&pdev->dev);
+
+ vpfe_ccdc_config_defaults(ccdc);
+
+ pm_runtime_put_sync(&pdev->dev);
+
+ vpfe->sd = devm_kzalloc(&pdev->dev, sizeof(struct v4l2_subdev *) *
+ ARRAY_SIZE(vpfe->cfg->asd), GFP_KERNEL);
+ if (!vpfe->sd) {
+ ret = -ENOMEM;
+ goto probe_out_v4l2_unregister;
+ }
+
+ vpfe->notifier.subdevs = vpfe->cfg->asd;
+ vpfe->notifier.num_subdevs = ARRAY_SIZE(vpfe->cfg->asd);
+ vpfe->notifier.bound = vpfe_async_bound;
+ vpfe->notifier.complete = vpfe_async_complete;
+ ret = v4l2_async_notifier_register(&vpfe->v4l2_dev,
+ &vpfe->notifier);
+ if (ret) {
+ vpfe_err(vpfe, "Error registering async notifier\n");
+ ret = -EINVAL;
+ goto probe_out_v4l2_unregister;
+ }
+
+ return 0;
+
+probe_out_v4l2_unregister:
+ v4l2_device_unregister(&vpfe->v4l2_dev);
+probe_out_video_release:
+ if (!video_is_registered(vpfe->video_dev))
+ video_device_release(vpfe->video_dev);
+ return ret;
+}
+
+/*
+ * vpfe_remove : It un-register device from V4L2 driver
+ */
+static int vpfe_remove(struct platform_device *pdev)
+{
+ struct vpfe_device *vpfe = platform_get_drvdata(pdev);
+
+ vpfe_dbg(2, vpfe, "vpfe_remove\n");
+
+ pm_runtime_disable(&pdev->dev);
+
+ v4l2_async_notifier_unregister(&vpfe->notifier);
+ v4l2_device_unregister(&vpfe->v4l2_dev);
+ video_unregister_device(vpfe->video_dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static void vpfe_save_context(struct vpfe_ccdc *ccdc)
+{
+ ccdc->ccdc_ctx[VPFE_PCR >> 2] = vpfe_reg_read(ccdc, VPFE_PCR);
+ ccdc->ccdc_ctx[VPFE_SYNMODE >> 2] = vpfe_reg_read(ccdc, VPFE_SYNMODE);
+ ccdc->ccdc_ctx[VPFE_SDOFST >> 2] = vpfe_reg_read(ccdc, VPFE_SDOFST);
+ ccdc->ccdc_ctx[VPFE_SDR_ADDR >> 2] = vpfe_reg_read(ccdc, VPFE_SDR_ADDR);
+ ccdc->ccdc_ctx[VPFE_CLAMP >> 2] = vpfe_reg_read(ccdc, VPFE_CLAMP);
+ ccdc->ccdc_ctx[VPFE_DCSUB >> 2] = vpfe_reg_read(ccdc, VPFE_DCSUB);
+ ccdc->ccdc_ctx[VPFE_COLPTN >> 2] = vpfe_reg_read(ccdc, VPFE_COLPTN);
+ ccdc->ccdc_ctx[VPFE_BLKCMP >> 2] = vpfe_reg_read(ccdc, VPFE_BLKCMP);
+ ccdc->ccdc_ctx[VPFE_VDINT >> 2] = vpfe_reg_read(ccdc, VPFE_VDINT);
+ ccdc->ccdc_ctx[VPFE_ALAW >> 2] = vpfe_reg_read(ccdc, VPFE_ALAW);
+ ccdc->ccdc_ctx[VPFE_REC656IF >> 2] = vpfe_reg_read(ccdc, VPFE_REC656IF);
+ ccdc->ccdc_ctx[VPFE_CCDCFG >> 2] = vpfe_reg_read(ccdc, VPFE_CCDCFG);
+ ccdc->ccdc_ctx[VPFE_CULLING >> 2] = vpfe_reg_read(ccdc, VPFE_CULLING);
+ ccdc->ccdc_ctx[VPFE_HD_VD_WID >> 2] = vpfe_reg_read(ccdc,
+ VPFE_HD_VD_WID);
+ ccdc->ccdc_ctx[VPFE_PIX_LINES >> 2] = vpfe_reg_read(ccdc,
+ VPFE_PIX_LINES);
+ ccdc->ccdc_ctx[VPFE_HORZ_INFO >> 2] = vpfe_reg_read(ccdc,
+ VPFE_HORZ_INFO);
+ ccdc->ccdc_ctx[VPFE_VERT_START >> 2] = vpfe_reg_read(ccdc,
+ VPFE_VERT_START);
+ ccdc->ccdc_ctx[VPFE_VERT_LINES >> 2] = vpfe_reg_read(ccdc,
+ VPFE_VERT_LINES);
+ ccdc->ccdc_ctx[VPFE_HSIZE_OFF >> 2] = vpfe_reg_read(ccdc,
+ VPFE_HSIZE_OFF);
+}
+
+static int vpfe_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct vpfe_device *vpfe = platform_get_drvdata(pdev);
+ struct vpfe_ccdc *ccdc = &vpfe->ccdc;
+
+ /* if streaming has not started we don't care */
+ if (!vb2_start_streaming_called(&vpfe->buffer_queue))
+ return 0;
+
+ pm_runtime_get_sync(dev);
+ vpfe_config_enable(ccdc, 1);
+
+ /* Save VPFE context */
+ vpfe_save_context(ccdc);
+
+ /* Disable CCDC */
+ vpfe_pcr_enable(ccdc, 0);
+ vpfe_config_enable(ccdc, 0);
+
+ /* Disable both master and slave clock */
+ pm_runtime_put_sync(dev);
+
+ /* Select sleep pin state */
+ pinctrl_pm_select_sleep_state(dev);
+
+ return 0;
+}
+
+static void vpfe_restore_context(struct vpfe_ccdc *ccdc)
+{
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_SYNMODE >> 2], VPFE_SYNMODE);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_CULLING >> 2], VPFE_CULLING);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_SDOFST >> 2], VPFE_SDOFST);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_SDR_ADDR >> 2], VPFE_SDR_ADDR);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_CLAMP >> 2], VPFE_CLAMP);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_DCSUB >> 2], VPFE_DCSUB);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_COLPTN >> 2], VPFE_COLPTN);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_BLKCMP >> 2], VPFE_BLKCMP);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_VDINT >> 2], VPFE_VDINT);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_ALAW >> 2], VPFE_ALAW);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_REC656IF >> 2], VPFE_REC656IF);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_CCDCFG >> 2], VPFE_CCDCFG);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_PCR >> 2], VPFE_PCR);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_HD_VD_WID >> 2],
+ VPFE_HD_VD_WID);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_PIX_LINES >> 2],
+ VPFE_PIX_LINES);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_HORZ_INFO >> 2],
+ VPFE_HORZ_INFO);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_VERT_START >> 2],
+ VPFE_VERT_START);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_VERT_LINES >> 2],
+ VPFE_VERT_LINES);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_HSIZE_OFF >> 2],
+ VPFE_HSIZE_OFF);
+}
+
+static int vpfe_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct vpfe_device *vpfe = platform_get_drvdata(pdev);
+ struct vpfe_ccdc *ccdc = &vpfe->ccdc;
+
+ /* if streaming has not started we don't care */
+ if (!vb2_start_streaming_called(&vpfe->buffer_queue))
+ return 0;
+
+ /* Enable both master and slave clock */
+ pm_runtime_get_sync(dev);
+ vpfe_config_enable(ccdc, 1);
+
+ /* Restore VPFE context */
+ vpfe_restore_context(ccdc);
+
+ vpfe_config_enable(ccdc, 0);
+ pm_runtime_put_sync(dev);
+
+ /* Select default pin state */
+ pinctrl_pm_select_default_state(dev);
+
+ return 0;
+}
+
+#endif
+
+static SIMPLE_DEV_PM_OPS(vpfe_pm_ops, vpfe_suspend, vpfe_resume);
+
+static const struct of_device_id vpfe_of_match[] = {
+ { .compatible = "ti,am437x-vpfe", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, vpfe_of_match);
+
+static struct platform_driver vpfe_driver = {
+ .probe = vpfe_probe,
+ .remove = vpfe_remove,
+ .driver = {
+ .name = VPFE_MODULE_NAME,
+ .owner = THIS_MODULE,
+ .pm = &vpfe_pm_ops,
+ .of_match_table = of_match_ptr(vpfe_of_match),
+ },
+};
+
+module_platform_driver(vpfe_driver);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("TI AM437x VPFE driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(VPFE_VERSION);
diff --git a/drivers/media/platform/am437x/am437x-vpfe.h b/drivers/media/platform/am437x/am437x-vpfe.h
new file mode 100644
index 0000000..0f55735
--- /dev/null
+++ b/drivers/media/platform/am437x/am437x-vpfe.h
@@ -0,0 +1,283 @@
+/*
+ * Copyright (C) 2013 - 2014 Texas Instruments, Inc.
+ *
+ * Benoit Parrot <bparrot@...com>
+ * Lad, Prabhakar <prabhakar.csengg@...il.com>
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef AM437X_VPFE_H
+#define AM437X_VPFE_H
+
+#include <linux/am437x-vpfe.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include "am437x-vpfe_regs.h"
+
+enum vpfe_pin_pol {
+ VPFE_PINPOL_POSITIVE = 0,
+ VPFE_PINPOL_NEGATIVE,
+};
+
+enum vpfe_hw_if_type {
+ /* Raw Bayer */
+ VPFE_RAW_BAYER = 0,
+ /* BT656 - 8 bit */
+ VPFE_BT656,
+ /* BT656 - 10 bit */
+ VPFE_BT656_10BIT,
+ /* YCbCr - 8 bit with external sync */
+ VPFE_YCBCR_SYNC_8,
+ /* YCbCr - 16 bit with external sync */
+ VPFE_YCBCR_SYNC_16,
+};
+
+/* interface description */
+struct vpfe_hw_if_param {
+ enum vpfe_hw_if_type if_type;
+ enum vpfe_pin_pol hdpol;
+ enum vpfe_pin_pol vdpol;
+ unsigned int bus_width;
+};
+
+#define VPFE_MAX_SUBDEV 1
+#define VPFE_MAX_INPUTS 1
+
+struct vpfe_pixel_format {
+ struct v4l2_fmtdesc fmtdesc;
+ /* bytes per pixel */
+ int bpp;
+};
+
+struct vpfe_std_info {
+ int active_pixels;
+ int active_lines;
+ /* current frame format */
+ int frame_format;
+};
+
+struct vpfe_route {
+ u32 input;
+ u32 output;
+};
+
+struct vpfe_subdev_info {
+ char name[32];
+ /* Sub device group id */
+ int grp_id;
+ /* inputs available at the sub device */
+ struct v4l2_input inputs[VPFE_MAX_INPUTS];
+ /* Sub dev routing information for each input */
+ struct vpfe_route *routes;
+ /* check if sub dev supports routing */
+ int can_route;
+ /* ccdc bus/interface configuration */
+ struct vpfe_hw_if_param vpfe_param;
+ struct v4l2_subdev *sd;
+};
+
+struct vpfe_config {
+ /* information about each subdev */
+ struct vpfe_subdev_info sub_devs[VPFE_MAX_SUBDEV];
+ /* Flat array, arranged in groups */
+ struct v4l2_async_subdev *asd[VPFE_MAX_SUBDEV];
+};
+
+struct vpfe_cap_buffer {
+ struct vb2_buffer vb;
+ struct list_head list;
+};
+
+enum ccdc_pixfmt {
+ CCDC_PIXFMT_RAW = 0,
+ CCDC_PIXFMT_YCBCR_16BIT,
+ CCDC_PIXFMT_YCBCR_8BIT,
+};
+
+enum ccdc_frmfmt {
+ CCDC_FRMFMT_PROGRESSIVE = 0,
+ CCDC_FRMFMT_INTERLACED,
+};
+
+/* PIXEL ORDER IN MEMORY from LSB to MSB */
+/* only applicable for 8-bit input mode */
+enum ccdc_pixorder {
+ CCDC_PIXORDER_YCBYCR,
+ CCDC_PIXORDER_CBYCRY,
+};
+
+enum ccdc_buftype {
+ CCDC_BUFTYPE_FLD_INTERLEAVED,
+ CCDC_BUFTYPE_FLD_SEPARATED
+};
+
+
+/* returns the highest bit used for the gamma */
+static inline u8 ccdc_gamma_width_max_bit(enum vpfe_ccdc_gamma_width width)
+{
+ return 15 - width;
+}
+
+/* returns the highest bit used for this data size */
+static inline u8 ccdc_data_size_max_bit(enum vpfe_ccdc_data_size sz)
+{
+ return sz == VPFE_CCDC_DATA_8BITS ? 7 : 15 - sz;
+}
+
+/* Structure for CCDC configuration parameters for raw capture mode */
+struct ccdc_params_raw {
+ /* pixel format */
+ enum ccdc_pixfmt pix_fmt;
+ /* progressive or interlaced frame */
+ enum ccdc_frmfmt frm_fmt;
+ struct v4l2_rect win;
+ /* Current Format Bytes Per Pixels */
+ unsigned int bytesperpixel;
+ /* Current Format Bytes per Lines
+ * (Aligned to 32 bytes) used for HORZ_INFO
+ */
+ unsigned int bytesperline;
+ /* field id polarity */
+ enum vpfe_pin_pol fid_pol;
+ /* vertical sync polarity */
+ enum vpfe_pin_pol vd_pol;
+ /* horizontal sync polarity */
+ enum vpfe_pin_pol hd_pol;
+ /* interleaved or separated fields */
+ enum ccdc_buftype buf_type;
+ /*
+ * enable to store the image in inverse
+ * order in memory(bottom to top)
+ */
+ unsigned char image_invert_enable;
+ /* configurable parameters */
+ struct vpfe_ccdc_config_params_raw config_params;
+};
+
+struct ccdc_params_ycbcr {
+ /* pixel format */
+ enum ccdc_pixfmt pix_fmt;
+ /* progressive or interlaced frame */
+ enum ccdc_frmfmt frm_fmt;
+ struct v4l2_rect win;
+ /* Current Format Bytes Per Pixels */
+ unsigned int bytesperpixel;
+ /* Current Format Bytes per Lines
+ * (Aligned to 32 bytes) used for HORZ_INFO
+ */
+ unsigned int bytesperline;
+ /* field id polarity */
+ enum vpfe_pin_pol fid_pol;
+ /* vertical sync polarity */
+ enum vpfe_pin_pol vd_pol;
+ /* horizontal sync polarity */
+ enum vpfe_pin_pol hd_pol;
+ /* enable BT.656 embedded sync mode */
+ int bt656_enable;
+ /* cb:y:cr:y or y:cb:y:cr in memory */
+ enum ccdc_pixorder pix_order;
+ /* interleaved or separated fields */
+ enum ccdc_buftype buf_type;
+};
+
+/*
+ * CCDC operational configuration
+ */
+struct ccdc_config {
+ /* CCDC interface type */
+ enum vpfe_hw_if_type if_type;
+ /* Raw Bayer configuration */
+ struct ccdc_params_raw bayer;
+ /* YCbCr configuration */
+ struct ccdc_params_ycbcr ycbcr;
+ /* ccdc base address */
+ void __iomem *base_addr;
+};
+
+struct vpfe_ccdc {
+ struct ccdc_config ccdc_cfg;
+ u32 ccdc_ctx[VPFE_REG_END / sizeof(u32)];
+};
+
+struct vpfe_device {
+ /* V4l2 specific parameters */
+ /* Identifies video device for this channel */
+ struct video_device *video_dev;
+ /* sub devices */
+ struct v4l2_subdev **sd;
+ /* vpfe cfg */
+ struct vpfe_config *cfg;
+ /* V4l2 device */
+ struct v4l2_device v4l2_dev;
+ /* parent device */
+ struct device *pdev;
+ /* subdevice async Notifier */
+ struct v4l2_async_notifier notifier;
+ /* Indicates id of the field which is being displayed */
+ unsigned field;
+ unsigned sequence;
+ /* current interface type */
+ struct vpfe_hw_if_param vpfe_if_params;
+ /* ptr to currently selected sub device */
+ struct vpfe_subdev_info *current_subdev;
+ /* current input at the sub device */
+ int current_input;
+ /* Keeps track of the information about the standard */
+ struct vpfe_std_info std_info;
+ /* std index into std table */
+ int std_index;
+ /* IRQs used when CCDC output to SDRAM */
+ unsigned int irq;
+ /* Pointer pointing to current v4l2_buffer */
+ struct vpfe_cap_buffer *cur_frm;
+ /* Pointer pointing to next v4l2_buffer */
+ struct vpfe_cap_buffer *next_frm;
+ /* Used to store pixel format */
+ struct v4l2_format fmt;
+ /* Used to store current bytes per pixel based on current format */
+ unsigned int bpp;
+ /*
+ * used when IMP is chained to store the crop window which
+ * is different from the image window
+ */
+ struct v4l2_rect crop;
+ /* Buffer queue used in video-buf */
+ struct vb2_queue buffer_queue;
+ /* Allocator-specific contexts for each plane */
+ struct vb2_alloc_ctx *alloc_ctx;
+ /* Queue of filled frames */
+ struct list_head dma_queue;
+ /* IRQ lock for DMA queue */
+ spinlock_t dma_queue_lock;
+ /* lock used to access this structure */
+ struct mutex lock;
+ /*
+ * offset where second field starts from the starting of the
+ * buffer for field separated YCbCr formats
+ */
+ u32 field_off;
+ struct vpfe_ccdc ccdc;
+};
+
+#endif /* AM437X_VPFE_H */
diff --git a/drivers/media/platform/am437x/am437x-vpfe_regs.h b/drivers/media/platform/am437x/am437x-vpfe_regs.h
new file mode 100644
index 0000000..4a0ed29
--- /dev/null
+++ b/drivers/media/platform/am437x/am437x-vpfe_regs.h
@@ -0,0 +1,140 @@
+/*
+ * TI AM437x Image Sensor Interface Registers
+ *
+ * Copyright (C) 2013 - 2014 Texas Instruments, Inc.
+ *
+ * Benoit Parrot <bparrot@...com>
+ * Lad, Prabhakar <prabhakar.csengg@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef AM437X_VPFE_REGS_H
+#define AM437X_VPFE_REGS_H
+
+/* VPFE module register offset */
+#define VPFE_REVISION 0x0
+#define VPFE_PCR 0x4
+#define VPFE_SYNMODE 0x8
+#define VPFE_HD_VD_WID 0xc
+#define VPFE_PIX_LINES 0x10
+#define VPFE_HORZ_INFO 0x14
+#define VPFE_VERT_START 0x18
+#define VPFE_VERT_LINES 0x1c
+#define VPFE_CULLING 0x20
+#define VPFE_HSIZE_OFF 0x24
+#define VPFE_SDOFST 0x28
+#define VPFE_SDR_ADDR 0x2c
+#define VPFE_CLAMP 0x30
+#define VPFE_DCSUB 0x34
+#define VPFE_COLPTN 0x38
+#define VPFE_BLKCMP 0x3c
+#define VPFE_VDINT 0x48
+#define VPFE_ALAW 0x4c
+#define VPFE_REC656IF 0x50
+#define VPFE_CCDCFG 0x54
+#define VPFE_DMA_CNTL 0x98
+#define VPFE_SYSCONFIG 0x104
+#define VPFE_CONFIG 0x108
+#define VPFE_IRQ_EOI 0x110
+#define VPFE_IRQ_STS_RAW 0x114
+#define VPFE_IRQ_STS 0x118
+#define VPFE_IRQ_EN_SET 0x11c
+#define VPFE_IRQ_EN_CLR 0x120
+#define VPFE_REG_END 0x124
+
+/* Define bit fields within selected registers */
+#define VPFE_FID_POL_MASK 1
+#define VPFE_FID_POL_SHIFT 4
+#define VPFE_HD_POL_MASK 1
+#define VPFE_HD_POL_SHIFT 3
+#define VPFE_VD_POL_MASK 1
+#define VPFE_VD_POL_SHIFT 2
+#define VPFE_HSIZE_OFF_MASK 0xffffffe0
+#define VPFE_32BYTE_ALIGN_VAL 31
+#define VPFE_FRM_FMT_MASK 0x1
+#define VPFE_FRM_FMT_SHIFT 7
+#define VPFE_DATA_SZ_MASK 7
+#define VPFE_DATA_SZ_SHIFT 8
+#define VPFE_PIX_FMT_MASK 3
+#define VPFE_PIX_FMT_SHIFT 12
+#define VPFE_VP2SDR_DISABLE 0xfffbffff
+#define VPFE_WEN_ENABLE (1 << 17)
+#define VPFE_SDR2RSZ_DISABLE 0xfff7ffff
+#define VPFE_VDHDEN_ENABLE (1 << 16)
+#define VPFE_LPF_ENABLE (1 << 14)
+#define VPFE_ALAW_ENABLE (1 << 3)
+#define VPFE_ALAW_GAMMA_WD_MASK 7
+#define VPFE_BLK_CLAMP_ENABLE (1 << 31)
+#define VPFE_BLK_SGAIN_MASK 0x1f
+#define VPFE_BLK_ST_PXL_MASK 0x7fff
+#define VPFE_BLK_ST_PXL_SHIFT 10
+#define VPFE_BLK_SAMPLE_LN_MASK 7
+#define VPFE_BLK_SAMPLE_LN_SHIFT 28
+#define VPFE_BLK_SAMPLE_LINE_MASK 7
+#define VPFE_BLK_SAMPLE_LINE_SHIFT 25
+#define VPFE_BLK_DC_SUB_MASK 0x03fff
+#define VPFE_BLK_COMP_MASK 0xff
+#define VPFE_BLK_COMP_GB_COMP_SHIFT 8
+#define VPFE_BLK_COMP_GR_COMP_SHIFT 16
+#define VPFE_BLK_COMP_R_COMP_SHIFT 24
+#define VPFE_LATCH_ON_VSYNC_DISABLE (1 << 15)
+#define VPFE_DATA_PACK_ENABLE (1 << 11)
+#define VPFE_HORZ_INFO_SPH_SHIFT 16
+#define VPFE_VERT_START_SLV0_SHIFT 16
+#define VPFE_VDINT_VDINT0_SHIFT 16
+#define VPFE_VDINT_VDINT1_MASK 0xffff
+#define VPFE_PPC_RAW 1
+#define VPFE_DCSUB_DEFAULT_VAL 0
+#define VPFE_CLAMP_DEFAULT_VAL 0
+#define VPFE_COLPTN_VAL 0xbb11bb11
+#define VPFE_TWO_BYTES_PER_PIXEL 2
+#define VPFE_INTERLACED_IMAGE_INVERT 0x4b6d
+#define VPFE_INTERLACED_NO_IMAGE_INVERT 0x0249
+#define VPFE_PROGRESSIVE_IMAGE_INVERT 0x4000
+#define VPFE_PROGRESSIVE_NO_IMAGE_INVERT 0
+#define VPFE_INTERLACED_HEIGHT_SHIFT 1
+#define VPFE_SYN_MODE_INPMOD_SHIFT 12
+#define VPFE_SYN_MODE_INPMOD_MASK 3
+#define VPFE_SYN_MODE_8BITS (7 << 8)
+#define VPFE_SYN_MODE_10BITS (6 << 8)
+#define VPFE_SYN_MODE_11BITS (5 << 8)
+#define VPFE_SYN_MODE_12BITS (4 << 8)
+#define VPFE_SYN_MODE_13BITS (3 << 8)
+#define VPFE_SYN_MODE_14BITS (2 << 8)
+#define VPFE_SYN_MODE_15BITS (1 << 8)
+#define VPFE_SYN_MODE_16BITS (0 << 8)
+#define VPFE_SYN_FLDMODE_MASK 1
+#define VPFE_SYN_FLDMODE_SHIFT 7
+#define VPFE_REC656IF_BT656_EN 3
+#define VPFE_SYN_MODE_VD_POL_NEGATIVE (1 << 2)
+#define VPFE_CCDCFG_Y8POS_SHIFT 11
+#define VPFE_CCDCFG_BW656_10BIT (1 << 5)
+#define VPFE_SDOFST_FIELD_INTERLEAVED 0x249
+#define VPFE_NO_CULLING 0xffff00ff
+#define VPFE_VDINT0 (1 << 0)
+#define VPFE_VDINT1 (1 << 1)
+#define VPFE_VDINT2 (1 << 2)
+#define VPFE_DMA_CNTL_OVERFLOW (1 << 31)
+
+#define VPFE_CONFIG_PCLK_INV_SHIFT 0
+#define VPFE_CONFIG_PCLK_INV_MASK 1
+#define VPFE_CONFIG_PCLK_INV_NOT_INV 0
+#define VPFE_CONFIG_PCLK_INV_INV 1
+#define VPFE_CONFIG_EN_SHIFT 1
+#define VPFE_CONFIG_EN_MASK 2
+#define VPFE_CONFIG_EN_DISABLE 0
+#define VPFE_CONFIG_EN_ENABLE 1
+#define VPFE_CONFIG_ST_SHIFT 2
+#define VPFE_CONFIG_ST_MASK 4
+#define VPFE_CONFIG_ST_OCP_ACTIVE 0
+#define VPFE_CONFIG_ST_OCP_STANDBY 1
+
+#endif /* AM437X_VPFE_REGS_H */
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index ed39ac8..65495f0 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -34,6 +34,7 @@ header-y += adfs_fs.h
header-y += affs_hardblocks.h
header-y += agpgart.h
header-y += aio_abi.h
+header-y += am437x-vpfe.h
header-y += apm_bios.h
header-y += arcfb.h
header-y += atalk.h
diff --git a/include/uapi/linux/am437x-vpfe.h b/include/uapi/linux/am437x-vpfe.h
new file mode 100644
index 0000000..9b03033f
--- /dev/null
+++ b/include/uapi/linux/am437x-vpfe.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2013 - 2014 Texas Instruments, Inc.
+ *
+ * Benoit Parrot <bparrot@...com>
+ * Lad, Prabhakar <prabhakar.csengg@...il.com>
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef AM437X_VPFE_USER_H
+#define AM437X_VPFE_USER_H
+
+enum vpfe_ccdc_data_size {
+ VPFE_CCDC_DATA_16BITS = 0,
+ VPFE_CCDC_DATA_15BITS,
+ VPFE_CCDC_DATA_14BITS,
+ VPFE_CCDC_DATA_13BITS,
+ VPFE_CCDC_DATA_12BITS,
+ VPFE_CCDC_DATA_11BITS,
+ VPFE_CCDC_DATA_10BITS,
+ VPFE_CCDC_DATA_8BITS,
+};
+
+/* enum for No of pixel per line to be avg. in Black Clamping*/
+enum vpfe_ccdc_sample_length {
+ VPFE_CCDC_SAMPLE_1PIXELS = 0,
+ VPFE_CCDC_SAMPLE_2PIXELS,
+ VPFE_CCDC_SAMPLE_4PIXELS,
+ VPFE_CCDC_SAMPLE_8PIXELS,
+ VPFE_CCDC_SAMPLE_16PIXELS,
+};
+
+/* enum for No of lines in Black Clamping */
+enum vpfe_ccdc_sample_line {
+ VPFE_CCDC_SAMPLE_1LINES = 0,
+ VPFE_CCDC_SAMPLE_2LINES,
+ VPFE_CCDC_SAMPLE_4LINES,
+ VPFE_CCDC_SAMPLE_8LINES,
+ VPFE_CCDC_SAMPLE_16LINES,
+};
+
+/* enum for Alaw gamma width */
+enum vpfe_ccdc_gamma_width {
+ VPFE_CCDC_GAMMA_BITS_15_6 = 0, /* use bits 15-6 for gamma */
+ VPFE_CCDC_GAMMA_BITS_14_5,
+ VPFE_CCDC_GAMMA_BITS_13_4,
+ VPFE_CCDC_GAMMA_BITS_12_3,
+ VPFE_CCDC_GAMMA_BITS_11_2,
+ VPFE_CCDC_GAMMA_BITS_10_1,
+ VPFE_CCDC_GAMMA_BITS_09_0, /* use bits 9-0 for gamma */
+};
+
+/* structure for ALaw */
+struct vpfe_ccdc_a_law {
+ /* Enable/disable A-Law */
+ unsigned char enable;
+ /* Gamma Width Input */
+ enum vpfe_ccdc_gamma_width gamma_wd;
+};
+
+/* structure for Black Clamping */
+struct vpfe_ccdc_black_clamp {
+ unsigned char enable;
+ /* only if bClampEnable is TRUE */
+ enum vpfe_ccdc_sample_length sample_pixel;
+ /* only if bClampEnable is TRUE */
+ enum vpfe_ccdc_sample_line sample_ln;
+ /* only if bClampEnable is TRUE */
+ unsigned short start_pixel;
+ /* only if bClampEnable is TRUE */
+ unsigned short sgain;
+ /* only if bClampEnable is FALSE */
+ unsigned short dc_sub;
+};
+
+/* structure for Black Level Compensation */
+struct vpfe_ccdc_black_compensation {
+ /* Constant value to subtract from Red component */
+ char r;
+ /* Constant value to subtract from Gr component */
+ char gr;
+ /* Constant value to subtract from Blue component */
+ char b;
+ /* Constant value to subtract from Gb component */
+ char gb;
+};
+
+/* Structure for CCDC configuration parameters for raw capture mode passed
+ * by application
+ */
+struct vpfe_ccdc_config_params_raw {
+ /* data size value from 8 to 16 bits */
+ enum vpfe_ccdc_data_size data_sz;
+ /* Structure for Optional A-Law */
+ struct vpfe_ccdc_a_law alaw;
+ /* Structure for Optical Black Clamp */
+ struct vpfe_ccdc_black_clamp blk_clamp;
+ /* Structure for Black Compensation */
+ struct vpfe_ccdc_black_compensation blk_comp;
+};
+
+/*
+ * Private IOCTL
+ * VIDIOC_AM437X_CCDC_CFG - Set CCDC configuration for raw capture
+ * This is an experimental ioctl that will change in future kernels. So use
+ * this ioctl with care !
+ **/
+#define VIDIOC_AM437X_CCDC_CFG \
+ _IOW('V', BASE_VIDIOC_PRIVATE + 1, void *)
+
+#endif /* AM437X_VPFE_USER_H */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists