| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <548708CC.5000405@linux.intel.com>
Date: Tue, 09 Dec 2014 22:35:56 +0800
From: Jiang Liu <jiang.liu@...ux.intel.com>
To: Marc Zyngier <marc.zyngier@....com>,
Yijing Wang <wangyijing@...wei.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Thomas Gleixner <tglx@...utronix.de>
CC: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Will Deacon <Will.Deacon@....com>,
"suravee.suthikulpanit@....com" <suravee.suthikulpanit@....com>
Subject: Re: [PATCH 2/6] PCI/MSI: add hooks to populate the msi_domain field
On 2014/12/9 22:27, Marc Zyngier wrote:
> On 09/12/14 14:11, Jiang Liu wrote:
>> On 2014/12/9 22:03, Marc Zyngier wrote:
>>> Hi Gerry,
>>>
>>> On 09/12/14 12:47, Jiang Liu wrote:
>>>> On 2014/12/9 20:12, Marc Zyngier wrote:
>>>>> Yijing,
>>>>>
>>>>> On 09/12/14 11:57, Yijing Wang wrote:
>>>>>>>>> +void __weak pcibios_set_phb_msi_domain(struct pci_bus *bus)
>>>>>>>>> +{
>>>>>>>>> +}
>>>>>>>>> +
>>>>>>>>> +static void pci_set_bus_msi_domain(struct pci_bus *bus)
>>>>>>>>> +{
>>>>>>>>> + struct pci_dev *bridge = bus->self;
>>>>>>>>> +
>>>>>>>>> + if (!bridge)
>>>>>>>>> + pcibios_set_phb_msi_domain(bus);
>>>>>>>>> + else
>>>>>>>>> + dev_set_msi_domain(&bus->dev, dev_get_msi_domain(&bridge->dev));
>>>>>>>>> +}
>>>>>>>>
>>>>>>>>
>>>>>>>> Hi Marc, we can not assume pci devices under same phb share the same msi irq domain,
>>>>>>>> now in x86, pci devices under the same phb may associate different msi irq domain.
>>>>>>
>>>>>> Hi Marc,
>>>>>>
>>>>>>>
>>>>>>> Well, this is not supposed to be a perfect solution yet, but instead a
>>>>>>> basis for discussion. What I'd like to find out is:
>>>>>>>
>>>>>>> - What is the minimum granularity for associating a device with its MSI
>>>>>>> domain in existing platforms?
>>>>>>
>>>>>> PCI device, after Gerry's msi irq domain patchset which now in linux-next,
>>>>>> in x86, we will find msi irq domain by pci_dev.
>>>>>
>>>>> Are you *really* associating the MSI domain on a per pci-device basis?
>>>>> That is, you have devices on the same PCI bus talking to different MSI hw?
>>>> Hi Marc,
>>>> This is a little wild:(
>>>> On x86 platform with Intel VT-d(not the case for AMD-v),
>>>> interrupt remapping is tight to DMA remapping (IOMMU) unit.
>>>> For most common cases, IOMMU unit manages PCI bus and its sub-hierarchy.
>>>> But it may also manage a specific PCI device. This is typically used to
>>>> provide QoS for audio device by using dedicated IOMMU unit to avoid
>>>> resource contention on DMA remapping tables. BIOS uses ACPI table to
>>>> report PCI bus/device to IOMMU unit mapping relationship. (To be honest,
>>>> I have no really experience with such a hardware platform yet, just for
>>>> theoretical analysis)
>>>> On the other hand, we now support hierarchy irqdomain. So to
>>>> support per-PCI IOMMU unit case, we need maintain irqdomain at PCI
>>>> device level.
>>>> This piece of code from your [4/6] is flexible enough, which
>>>> retrieves msi_domain from PCI device, then fallback to PCI bus,
>>>> then fallback to platform specific method.
>>>> domain = dev_get_msi_domain(&dev->dev);
>>>> if (!domain && dev->bus->msi)
>>>> domain = dev->bus->msi->domain;
>>>> if (!domain)
>>>> domain = arch_get_pci_msi_domain(dev);
>>>
>>> OK. But what I'd really like to see is a way to setup the
>>> device<->domain binding as early as possible, without having to use more
>>> conditional code in pci_msi_get_domain.
>>>
>>> IOW, can we do something similar to what pci_set_bus_msi_domain and
>>> pci_set_msi_domain do in this patch?
>> Hi Marc,
>> I have checked x86 code, we could set pci_dev->msi_domain
>> when creating PCI devices, just need to find some hook points
>> into PCI core next step. If arch code doesn't set pci_dev->msi_domain,
>> PCI MSI core may provide a default way to set pci_dev->msi_domain.
>> This may make the implementation simpler, I guess:)
>
> Right. So following your earlier suggestion, I could make
> pci_set_msi_domain a weak symbol and let arch code override this.
>
> My preference would have been to have arch code to create a set of
> arch-independent data structures describing the topology, and use that
> for everything, but maybe that's a bit ambitious for a start.
>
> I'll rework the series to make the symbols weak.
Hi Marc,
I think we may not need the weak symbol at all. With following
draft patch, the PCI MSI core may simply do:
if (pci_dev->dev.msi_domain == NULL)
dev_set_msi_domain(&dev->dev,
dev_get_msi_domain(&dev->bus->dev));
-----------------------------------------------------------------------
Note: the patch won't pass compilation, just to show the key idea:)
diff --git a/arch/x86/kernel/apic/msi.c b/arch/x86/kernel/apic/msi.c
index da163da5fdee..8147d25d4349 100644
--- a/arch/x86/kernel/apic/msi.c
+++ b/arch/x86/kernel/apic/msi.c
@@ -67,6 +67,23 @@ static struct irq_chip pci_msi_controller = {
.flags = IRQCHIP_SKIP_SET_WAKE,
};
+struct irq_domain *x86_get_pci_msi_domain(struct pci_dev *dev)
+{
+ struct irq_domain *domain;
+ struct irq_alloc_info info;
+
+ init_irq_alloc_info(&info, NULL);
+ info.type = X86_IRQ_ALLOC_TYPE_MSI;
+ info.msi_dev = dev;
+ domain = irq_remapping_get_irq_domain(&info);
+ if (domain == NULL)
+ domain = msi_default_domain;
+ if (domain == NULL)
+ domain = ERR_PTR(-ENOSYS);
+
+ return domain;
+}
+
int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
struct irq_domain *domain;
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 7b20bccf3648..a26f30a8bb8f 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -652,6 +652,9 @@ int pcibios_add_device(struct pci_dev *dev)
pa_data = data->next;
iounmap(data);
}
+
+ dev->dev.msi_domain = x86_get_pci_msi_domain(dev);
+
return 0;
}
>
> Thanks,
>
> M.
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists