[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1418194071-13785-4-git-send-email-jiang.liu@linux.intel.com>
Date: Wed, 10 Dec 2014 14:47:45 +0800
From: Jiang Liu <jiang.liu@...ux.intel.com>
To: "H. Peter Anvin" <hpa@...or.com>,
Thomas Gleixner <tglx@...utronix.de>,
Joerg Roedel <joro@...tes.org>,
David Woodhouse <dwmw2@...radead.org>,
Borislav Petkov <bp@...en8.de>, Ingo Molnar <mingo@...hat.com>,
x86@...nel.org, Jiang Liu <jiang.liu@...ux.intel.com>,
David Rientjes <rientjes@...gle.com>,
HATAYAMA Daisuke <d.hatayama@...fujitsu.com>,
Jan Beulich <JBeulich@...e.com>,
Richard Weinberger <richard@....at>,
Oren Twaig <oren@...lemp.com>
Cc: Tony Luck <tony.luck@...el.com>, iommu@...ts.linux-foundation.org,
linux-kernel@...r.kernel.org,
"H. Peter Anvin" <hpa@...ux.intel.com>,
Ingo Molnar <mingo@...nel.org>
Subject: [RFC Patch V1 3/9] x86, apic: Refine enable_IR_x2apic() and related functions
Refine enable_IR_x2apic() and related functions for better maintenence.
It also changes the way to treat IR in XAPIC mode as the same as IR is
disabled when enabling X2APIC.
Signed-off-by: Jiang Liu <jiang.liu@...ux.intel.com>
---
arch/x86/kernel/apic/apic.c | 78 ++++++++++++++++++++-----------------------
1 file changed, 37 insertions(+), 41 deletions(-)
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index b6c473b97c5c..2a9bac837be4 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1572,7 +1572,7 @@ void enable_x2apic(void)
}
#endif /* CONFIG_X86_X2APIC */
-int __init enable_IR(void)
+static int __init try_to_enable_IR(void)
{
#ifdef CONFIG_IRQ_REMAP
if (!irq_remapping_supported()) {
@@ -1585,44 +1585,18 @@ int __init enable_IR(void)
"io-apic setup\n");
return -1;
}
+#endif
return irq_remapping_enable();
-#endif
- return -1;
}
-void __init enable_IR_x2apic(void)
+static __init void try_to_enable_x2apic(int ir_stat)
{
- unsigned long flags;
- int ret;
- int hardware_init_ret;
-
- hardware_init_ret = irq_remapping_prepare();
- if (hardware_init_ret && !x2apic_supported())
- return;
-
- ret = save_ioapic_entries();
- if (ret) {
- pr_info("Saving IO-APIC state failed: %d\n", ret);
- return;
- }
-
- local_irq_save(flags);
- legacy_pic->mask_all();
- mask_ioapic_entries();
-
- if (x2apic_preenabled && nox2apic)
- disable_x2apic();
-
- if (hardware_init_ret)
- ret = -1;
- else
- ret = enable_IR();
-
+#ifdef CONFIG_X86_X2APIC
if (!x2apic_supported())
- goto skip_x2apic;
+ return;
- if (ret < 0) {
+ if (ir_stat != IRQ_REMAP_X2APIC_MODE) {
/* IR is required if there is APIC ID > 255 even when running
* under KVM
*/
@@ -1630,8 +1604,9 @@ void __init enable_IR_x2apic(void)
!hypervisor_x2apic_available()) {
if (x2apic_preenabled)
disable_x2apic();
- goto skip_x2apic;
+ return;
}
+
/*
* without IR all CPUs can be addressed by IOAPIC/MSI
* only in physical mode
@@ -1639,19 +1614,40 @@ void __init enable_IR_x2apic(void)
x2apic_force_phys();
}
- if (ret == IRQ_REMAP_XAPIC_MODE) {
- pr_info("x2apic not enabled, IRQ remapping is in xapic mode\n");
- goto skip_x2apic;
- }
-
- if (x2apic_supported() && !x2apic_mode) {
+ if (!x2apic_mode) {
x2apic_mode = 1;
enable_x2apic();
pr_info("Enabled x2apic\n");
}
+#endif
+}
+
+void __init enable_IR_x2apic(void)
+{
+ unsigned long flags;
+ int ret, ir_stat;
+
+ ir_stat = irq_remapping_prepare();
+ if (ir_stat < 0 && !x2apic_supported())
+ return;
+
+ ret = save_ioapic_entries();
+ if (ret) {
+ pr_info("Saving IO-APIC state failed: %d\n", ret);
+ return;
+ }
+
+ local_irq_save(flags);
+ legacy_pic->mask_all();
+ mask_ioapic_entries();
+
+ if (x2apic_preenabled && nox2apic)
+ disable_x2apic();
+ if (ir_stat >= 0)
+ ir_stat = try_to_enable_IR();
+ try_to_enable_x2apic(ir_stat);
-skip_x2apic:
- if (ret < 0) /* IR enabling failed */
+ if (ir_stat < 0) /* IR enabling failed */
restore_ioapic_entries();
legacy_pic->restore_mask();
local_irq_restore(flags);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists