| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <54882255.9060303@samsung.com>
Date: Wed, 10 Dec 2014 19:37:09 +0900
From: Beomho Seo <beomho.seo@...sung.com>
To: Lee Jones <lee.jones@...aro.org>
Cc: linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, sameo@...ux.intel.com,
lee.jone@...aro.org, lgirdwood@...il.com, broonie@...nel.org,
sre@...nel.org, dbaryshkov@...il.com, dwmw2@...radead.org,
robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
cw00.choi@...sung.com, geunsik.lim@...sung.com,
inki.dae@...sung.com, sw0312.kim@...sung.com,
beomho.seo@...sung.com
Subject: Re: [PATCH v8 1/4] mfd: rt5033: Add Richtek RT5033 driver core.
On 12/09/2014 11:01 PM, Lee Jones wrote:
> On Tue, 09 Dec 2014, Beomho Seo wrote:
>
>> This patch adds a new driver for Richtek RT5033 driver.
>> RT5033 is a Multifunction device which includes battery charger, fuel gauge,
>> flash LED current source, LDO and synchronous Buck converter. It is interfaced
>> to host controller using I2C interface.
>>
>> Cc: Samuel Ortiz <sameo@...ux.intel.com>
>> Cc: Lee Jones <lee.jone@...aro.org>
>> Signed-off-by: Beomho Seo <beomho.seo@...sung.com>
>> Acked-by: Chanwoo Choi <cw00.choi@...sung.com>
>> ---
>> Changes in v8
>> - Add description of hardware.
>> - Move structure.
>>
>> Changes in v7
>> - Use small description.
>> - Change some names for a variable.
>> - Revise of_device_id struct style.
>>
>> Changes in v6
>> - Fix white space issue in mfd cell struct.
>>
>> Changes in v5
>> - Change possible built as a module.
>> - Revise rt5033_dev mfd cell entry.
>> - Fix incorrect typo.
>> - Add module alias.
>>
>> Changes in v4
>> - none.
>>
>> Changes in v3
>> - Correct sentence errors.
>> - Add author information the top of each drivers.
>> - Remove unnecessary pre-initialise, struct member(rt5033->i2c) and blink.
>> - Change some return check.
>> - Use bool and of_match_ptr().
>>
>> Changes in v2
>> - Remove volatile_reg callback. Because this driver not in use regmap cache.
>> - Revmoe unnecessary subnode of_compatible.
>> - Add define for set_high impedance mode of charger.
>> ---
>> drivers/mfd/Kconfig | 12 ++
>> drivers/mfd/Makefile | 1 +
>> drivers/mfd/rt5033.c | 142 ++++++++++++++++++++
>> include/linux/mfd/rt5033-private.h | 260 ++++++++++++++++++++++++++++++++++++
>> include/linux/mfd/rt5033.h | 62 +++++++++
>> 5 files changed, 477 insertions(+)
>> create mode 100644 drivers/mfd/rt5033.c
>> create mode 100644 include/linux/mfd/rt5033-private.h
>> create mode 100644 include/linux/mfd/rt5033.h
>
> Much better.
>
> For my own reference:
>
> Acked-by: Lee Jones <lee.jones@...aro.org>
>
> So what's the plan with this set?
>
This patch have been made on for-next-mfd branch of your git repository.
So I hope this patch to be merged at your git repository.
Another patch set(RT5033 regulator driver) have been merged on for-next branch of regulator git repository.
https://git.kernel.org/cgit/linux/kernel/git/broonie/regulator.git/commit/?h=for-next&id=b1917578fd5d8efa67afa05a0d6d7e323f2802da
Other patches(about charger, fuelgague and devicetree doc) will be re-sent to each maintainers.
Thank you for response.
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index 2e6b731..9cd2af6 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -623,6 +623,18 @@ config MFD_RTSX_PCI
>> types of memory cards, such as Memory Stick, Memory Stick Pro,
>> Secure Digital and MultiMediaCard.
>>
>> +config MFD_RT5033
>> + tristate "Richtek RT5033 Power Management IC"
>> + depends on I2C=y
>> + select MFD_CORE
>> + select REGMAP_I2C
>> + help
>> + This driver provides for the Richtek RT5033 Power Management IC,
>> + which includes the I2C driver and the Core APIs. This driver provides
>> + common support for accessing the device. The device supports multiple
>> + sub-devices like charger, fuel gauge, flash LED, current source,
>> + LDO and Buck.
>> +
>> config MFD_RTSX_USB
>> tristate "Realtek USB card reader"
>> depends on USB
>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> index 53467e2..4059c24 100644
>> --- a/drivers/mfd/Makefile
>> +++ b/drivers/mfd/Makefile
>> @@ -176,6 +176,7 @@ obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
>> obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
>> obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
>> obj-$(CONFIG_MFD_DLN2) += dln2.o
>> +obj-$(CONFIG_MFD_RT5033) += rt5033.o
>>
>> intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
>> obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
>> diff --git a/drivers/mfd/rt5033.c b/drivers/mfd/rt5033.c
>> new file mode 100644
>> index 0000000..db395a6
>> --- /dev/null
>> +++ b/drivers/mfd/rt5033.c
>> @@ -0,0 +1,142 @@
>> +/*
>> + * MFD core driver for the Richtek RT5033.
>> + *
>> + * RT5033 comprises multiple sub-devices switcing charger, fuel gauge,
>> + * flash LED, current source, LDO and BUCK regulators.
>> + *
>> + * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
>> + * Author: Beomho Seo <beomho.seo@...sung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published bythe Free Software Foundation.
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/module.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/of_device.h>
>> +#include <linux/mfd/core.h>
>> +#include <linux/mfd/rt5033.h>
>> +#include <linux/mfd/rt5033-private.h>
>> +
>> +static const struct regmap_irq rt5033_irqs[] = {
>> + { .mask = RT5033_PMIC_IRQ_BUCKOCP, },
>> + { .mask = RT5033_PMIC_IRQ_BUCKLV, },
>> + { .mask = RT5033_PMIC_IRQ_SAFELDOLV, },
>> + { .mask = RT5033_PMIC_IRQ_LDOLV, },
>> + { .mask = RT5033_PMIC_IRQ_OT, },
>> + { .mask = RT5033_PMIC_IRQ_VDDA_UV, },
>> +};
>> +
>> +static const struct regmap_irq_chip rt5033_irq_chip = {
>> + .name = "rt5033",
>> + .status_base = RT5033_REG_PMIC_IRQ_STAT,
>> + .mask_base = RT5033_REG_PMIC_IRQ_CTRL,
>> + .mask_invert = true,
>> + .num_regs = 1,
>> + .irqs = rt5033_irqs,
>> + .num_irqs = ARRAY_SIZE(rt5033_irqs),
>> +};
>> +
>> +static const struct mfd_cell rt5033_devs[] = {
>> + { .name = "rt5033-regulator", },
>> + {
>> + .name = "rt5033-charger",
>> + .of_compatible = "richtek,rt5033-charger",
>> + }, {
>> + .name = "rt5033-battery",
>> + .of_compatible = "richtek,rt5033-battery",
>> + },
>> +};
>> +
>> +static const struct regmap_config rt5033_regmap_config = {
>> + .reg_bits = 8,
>> + .val_bits = 8,
>> + .max_register = RT5033_REG_END,
>> +};
>> +
>> +static int rt5033_i2c_probe(struct i2c_client *i2c,
>> + const struct i2c_device_id *id)
>> +{
>> + struct rt5033_dev *rt5033;
>> + unsigned int dev_id;
>> + int ret;
>> +
>> + rt5033 = devm_kzalloc(&i2c->dev, sizeof(*rt5033), GFP_KERNEL);
>> + if (!rt5033)
>> + return -ENOMEM;
>> +
>> + i2c_set_clientdata(i2c, rt5033);
>> + rt5033->dev = &i2c->dev;
>> + rt5033->irq = i2c->irq;
>> + rt5033->wakeup = true;
>> +
>> + rt5033->regmap = devm_regmap_init_i2c(i2c, &rt5033_regmap_config);
>> + if (IS_ERR(rt5033->regmap)) {
>> + dev_err(&i2c->dev, "Failed to allocate register map.\n");
>> + return PTR_ERR(rt5033->regmap);
>> + }
>> +
>> + ret = regmap_read(rt5033->regmap, RT5033_REG_DEVICE_ID, &dev_id);
>> + if (ret) {
>> + dev_err(&i2c->dev, "Device not found\n");
>> + return -ENODEV;
>> + }
>> + dev_info(&i2c->dev, "Device found Device ID: %04x\n", dev_id);
>> +
>> + ret = regmap_add_irq_chip(rt5033->regmap, rt5033->irq,
>> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
>> + 0, &rt5033_irq_chip, &rt5033->irq_data);
>> + if (ret) {
>> + dev_err(&i2c->dev, "Failed to request IRQ %d: %d\n",
>> + rt5033->irq, ret);
>> + return ret;
>> + }
>> +
>> + ret = mfd_add_devices(rt5033->dev, -1, rt5033_devs,
>> + ARRAY_SIZE(rt5033_devs), NULL, 0,
>> + regmap_irq_get_domain(rt5033->irq_data));
>> + if (ret < 0) {
>> + dev_err(&i2c->dev, "Failed to add RT5033 child devices.\n");
>> + return ret;
>> + }
>> +
>> + device_init_wakeup(rt5033->dev, rt5033->wakeup);
>> +
>> + return 0;
>> +}
>> +
>> +static int rt5033_i2c_remove(struct i2c_client *i2c)
>> +{
>> + mfd_remove_devices(&i2c->dev);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct i2c_device_id rt5033_i2c_id[] = {
>> + { "rt5033", },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(i2c, rt5033_i2c_id);
>> +
>> +static const struct of_device_id rt5033_dt_match[] = {
>> + { .compatible = "richtek,rt5033", },
>> + { }
>> +};
>> +
>> +static struct i2c_driver rt5033_driver = {
>> + .driver = {
>> + .name = "rt5033",
>> + .of_match_table = of_match_ptr(rt5033_dt_match),
>> + },
>> + .probe = rt5033_i2c_probe,
>> + .remove = rt5033_i2c_remove,
>> + .id_table = rt5033_i2c_id,
>> +};
>> +module_i2c_driver(rt5033_driver);
>> +
>> +MODULE_ALIAS("i2c:rt5033");
>> +MODULE_DESCRIPTION("Richtek RT5033 multi-function core driver");
>> +MODULE_AUTHOR("Beomho Seo <beomho.seo@...sung.com>");
>> +MODULE_LICENSE("GPL");
>> diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h
>> new file mode 100644
>> index 0000000..1b63fc2
>> --- /dev/null
>> +++ b/include/linux/mfd/rt5033-private.h
>> @@ -0,0 +1,260 @@
>> +/*
>> + * MFD core driver for Richtek RT5033
>> + *
>> + * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
>> + * Author: Beomho Seo <beomho.seo@...sung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published bythe Free Software Foundation.
>> + */
>> +
>> +#ifndef __RT5033_PRIVATE_H__
>> +#define __RT5033_PRIVATE_H__
>> +
>> +enum rt5033_reg {
>> + RT5033_REG_CHG_STAT = 0x00,
>> + RT5033_REG_CHG_CTRL1 = 0x01,
>> + RT5033_REG_CHG_CTRL2 = 0x02,
>> + RT5033_REG_DEVICE_ID = 0x03,
>> + RT5033_REG_CHG_CTRL3 = 0x04,
>> + RT5033_REG_CHG_CTRL4 = 0x05,
>> + RT5033_REG_CHG_CTRL5 = 0x06,
>> + RT5033_REG_RT_CTRL0 = 0x07,
>> + RT5033_REG_CHG_RESET = 0x08,
>> + /* Reserved 0x09~0x18 */
>> + RT5033_REG_RT_CTRL1 = 0x19,
>> + /* Reserved 0x1A~0x20 */
>> + RT5033_REG_FLED_FUNCTION1 = 0x21,
>> + RT5033_REG_FLED_FUNCTION2 = 0x22,
>> + RT5033_REG_FLED_STROBE_CTRL1 = 0x23,
>> + RT5033_REG_FLED_STROBE_CTRL2 = 0x24,
>> + RT5033_REG_FLED_CTRL1 = 0x25,
>> + RT5033_REG_FLED_CTRL2 = 0x26,
>> + RT5033_REG_FLED_CTRL3 = 0x27,
>> + RT5033_REG_FLED_CTRL4 = 0x28,
>> + RT5033_REG_FLED_CTRL5 = 0x29,
>> + /* Reserved 0x2A~0x40 */
>> + RT5033_REG_CTRL = 0x41,
>> + RT5033_REG_BUCK_CTRL = 0x42,
>> + RT5033_REG_LDO_CTRL = 0x43,
>> + /* Reserved 0x44~0x46 */
>> + RT5033_REG_MANUAL_RESET_CTRL = 0x47,
>> + /* Reserved 0x48~0x5F */
>> + RT5033_REG_CHG_IRQ1 = 0x60,
>> + RT5033_REG_CHG_IRQ2 = 0x61,
>> + RT5033_REG_CHG_IRQ3 = 0x62,
>> + RT5033_REG_CHG_IRQ1_CTRL = 0x63,
>> + RT5033_REG_CHG_IRQ2_CTRL = 0x64,
>> + RT5033_REG_CHG_IRQ3_CTRL = 0x65,
>> + RT5033_REG_LED_IRQ_STAT = 0x66,
>> + RT5033_REG_LED_IRQ_CTRL = 0x67,
>> + RT5033_REG_PMIC_IRQ_STAT = 0x68,
>> + RT5033_REG_PMIC_IRQ_CTRL = 0x69,
>> + RT5033_REG_SHDN_CTRL = 0x6A,
>> + RT5033_REG_OFF_EVENT = 0x6B,
>> +
>> + RT5033_REG_END,
>> +};
>> +
>> +/* RT5033 Charger state register */
>> +#define RT5033_CHG_STAT_MASK 0x20
>> +#define RT5033_CHG_STAT_DISCHARGING 0x00
>> +#define RT5033_CHG_STAT_FULL 0x10
>> +#define RT5033_CHG_STAT_CHARGING 0x20
>> +#define RT5033_CHG_STAT_NOT_CHARGING 0x30
>> +#define RT5033_CHG_STAT_TYPE_MASK 0x60
>> +#define RT5033_CHG_STAT_TYPE_PRE 0x20
>> +#define RT5033_CHG_STAT_TYPE_FAST 0x60
>> +
>> +/* RT5033 CHGCTRL1 register */
>> +#define RT5033_CHGCTRL1_IAICR_MASK 0xe0
>> +#define RT5033_CHGCTRL1_MODE_MASK 0x01
>> +
>> +/* RT5033 CHGCTRL2 register */
>> +#define RT5033_CHGCTRL2_CV_MASK 0xfc
>> +
>> +/* RT5033 CHGCTRL3 register */
>> +#define RT5033_CHGCTRL3_CFO_EN_MASK 0x40
>> +#define RT5033_CHGCTRL3_TIMER_MASK 0x38
>> +#define RT5033_CHGCTRL3_TIMER_EN_MASK 0x01
>> +
>> +/* RT5033 CHGCTRL4 register */
>> +#define RT5033_CHGCTRL4_EOC_MASK 0x07
>> +#define RT5033_CHGCTRL4_IPREC_MASK 0x18
>> +
>> +/* RT5033 CHGCTRL5 register */
>> +#define RT5033_CHGCTRL5_VPREC_MASK 0x0f
>> +#define RT5033_CHGCTRL5_ICHG_MASK 0xf0
>> +#define RT5033_CHGCTRL5_ICHG_SHIFT 0x04
>> +#define RT5033_CHG_MAX_CURRENT 0x0d
>> +
>> +/* RT5033 RT CTRL1 register */
>> +#define RT5033_RT_CTRL1_UUG_MASK 0x02
>> +#define RT5033_RT_HZ_MASK 0x01
>> +
>> +/* RT5033 control register */
>> +#define RT5033_CTRL_FCCM_BUCK_MASK 0x00
>> +#define RT5033_CTRL_BUCKOMS_MASK 0x01
>> +#define RT5033_CTRL_LDOOMS_MASK 0x02
>> +#define RT5033_CTRL_SLDOOMS_MASK 0x03
>> +#define RT5033_CTRL_EN_BUCK_MASK 0x04
>> +#define RT5033_CTRL_EN_LDO_MASK 0x05
>> +#define RT5033_CTRL_EN_SAFE_LDO_MASK 0x06
>> +#define RT5033_CTRL_LDO_SLEEP_MASK 0x07
>> +
>> +/* RT5033 BUCK control register */
>> +#define RT5033_BUCK_CTRL_MASK 0x1f
>> +
>> +/* RT5033 LDO control register */
>> +#define RT5033_LDO_CTRL_MASK 0x1f
>> +
>> +/* RT5033 charger property - model, manufacturer */
>> +
>> +#define RT5033_CHARGER_MODEL "RT5033WSC Charger"
>> +#define RT5033_MANUFACTURER "Richtek Technology Corporation"
>> +
>> +/*
>> + * RT5033 charger fast-charge current lmits (as in CHGCTRL1 register),
>> + * AICR mode limits the input current for example,
>> + * the AIRC 100 mode limits the input current to 100 mA.
>> + */
>> +#define RT5033_AICR_100_MODE 0x20
>> +#define RT5033_AICR_500_MODE 0x40
>> +#define RT5033_AICR_700_MODE 0x60
>> +#define RT5033_AICR_900_MODE 0x80
>> +#define RT5033_AICR_1500_MODE 0xc0
>> +#define RT5033_AICR_2000_MODE 0xe0
>> +#define RT5033_AICR_MODE_MASK 0xe0
>> +
>> +/* RT5033 use internal timer need to set time */
>> +#define RT5033_FAST_CHARGE_TIMER4 0x00
>> +#define RT5033_FAST_CHARGE_TIMER6 0x01
>> +#define RT5033_FAST_CHARGE_TIMER8 0x02
>> +#define RT5033_FAST_CHARGE_TIMER9 0x03
>> +#define RT5033_FAST_CHARGE_TIMER12 0x04
>> +#define RT5033_FAST_CHARGE_TIMER14 0x05
>> +#define RT5033_FAST_CHARGE_TIMER16 0x06
>> +
>> +#define RT5033_INT_TIMER_ENABLE 0x01
>> +
>> +/* RT5033 charger termination enable mask */
>> +#define RT5033_TE_ENABLE_MASK 0x08
>> +
>> +/*
>> + * RT5033 charger opa mode. RT50300 have two opa mode charger mode
>> + * and boost mode for OTG
>> + */
>> +
>> +#define RT5033_CHARGER_MODE 0x00
>> +#define RT5033_BOOST_MODE 0x01
>> +
>> +/* RT5033 charger termination enable */
>> +#define RT5033_TE_ENABLE 0x08
>> +
>> +/* RT5033 charger CFO enable */
>> +#define RT5033_CFO_ENABLE 0x40
>> +
>> +/* RT5033 charger constant charge voltage (as in CHGCTRL2 register), uV */
>> +#define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN 3650000U
>> +#define RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM 25000U
>> +#define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX 4400000U
>> +
>> +/* RT5033 charger pre-charge current limits (as in CHGCTRL4 register), uA */
>> +#define RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN 350000U
>> +#define RT5033_CHARGER_PRE_CURRENT_STEP_NUM 100000U
>> +#define RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX 650000U
>> +
>> +/* RT5033 charger fast-charge current (as in CHGCTRL5 register), uA */
>> +#define RT5033_CHARGER_FAST_CURRENT_MIN 700000U
>> +#define RT5033_CHARGER_FAST_CURRENT_STEP_NUM 100000U
>> +#define RT5033_CHARGER_FAST_CURRENT_MAX 2000000U
>> +
>> +/*
>> + * RT5033 charger const-charge end of charger current (
>> + * as in CHGCTRL4 register), uA
>> + */
>> +#define RT5033_CHARGER_EOC_MIN 150000U
>> +#define RT5033_CHARGER_EOC_REF 300000U
>> +#define RT5033_CHARGER_EOC_STEP_NUM1 50000U
>> +#define RT5033_CHARGER_EOC_STEP_NUM2 100000U
>> +#define RT5033_CHARGER_EOC_MAX 600000U
>> +
>> +/*
>> + * RT5033 charger pre-charge threshold volt limits
>> + * (as in CHGCTRL5 register), uV
>> + */
>> +
>> +#define RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MIN 2300000U
>> +#define RT5033_CHARGER_PRE_THRESHOLD_STEP_NUM 100000U
>> +#define RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MAX 3800000U
>> +
>> +/*
>> + * RT5033 charger enable UUG, If UUG enable MOS auto control by H/W charger
>> + * circuit.
>> + */
>> +#define RT5033_CHARGER_UUG_ENABLE 0x02
>> +
>> +/* RT5033 charger High impedance mode */
>> +#define RT5033_CHARGER_HZ_DISABLE 0x00
>> +#define RT5033_CHARGER_HZ_ENABLE 0x01
>> +
>> +/* RT5033 regulator BUCK output voltage uV */
>> +#define RT5033_REGULATOR_BUCK_VOLTAGE_MIN 1000000U
>> +#define RT5033_REGULATOR_BUCK_VOLTAGE_MAX 3000000U
>> +#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP 100000U
>> +#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM 32
>> +
>> +/* RT5033 regulator LDO output voltage uV */
>> +#define RT5033_REGULATOR_LDO_VOLTAGE_MIN 1200000U
>> +#define RT5033_REGULATOR_LDO_VOLTAGE_MAX 3000000U
>> +#define RT5033_REGULATOR_LDO_VOLTAGE_STEP 100000U
>> +#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM 32
>> +
>> +/* RT5033 regulator SAFE LDO output voltage uV */
>> +#define RT5033_REGULATOR_SAFE_LDO_VOLTAGE 4900000U
>> +
>> +enum rt5033_fuel_reg {
>> + RT5033_FUEL_REG_OCV_H = 0x00,
>> + RT5033_FUEL_REG_OCV_L = 0x01,
>> + RT5033_FUEL_REG_VBAT_H = 0x02,
>> + RT5033_FUEL_REG_VBAT_L = 0x03,
>> + RT5033_FUEL_REG_SOC_H = 0x04,
>> + RT5033_FUEL_REG_SOC_L = 0x05,
>> + RT5033_FUEL_REG_CTRL_H = 0x06,
>> + RT5033_FUEL_REG_CTRL_L = 0x07,
>> + RT5033_FUEL_REG_CRATE = 0x08,
>> + RT5033_FUEL_REG_DEVICE_ID = 0x09,
>> + RT5033_FUEL_REG_AVG_VOLT_H = 0x0A,
>> + RT5033_FUEL_REG_AVG_VOLT_L = 0x0B,
>> + RT5033_FUEL_REG_CONFIG_H = 0x0C,
>> + RT5033_FUEL_REG_CONFIG_L = 0x0D,
>> + /* Reserved 0x0E~0x0F */
>> + RT5033_FUEL_REG_IRQ_CTRL = 0x10,
>> + RT5033_FUEL_REG_IRQ_FLAG = 0x11,
>> + RT5033_FUEL_VMIN = 0x12,
>> + RT5033_FUEL_SMIN = 0x13,
>> + /* Reserved 0x14~0x1F */
>> + RT5033_FUEL_VGCOMP1 = 0x20,
>> + RT5033_FUEL_VGCOMP2 = 0x21,
>> + RT5033_FUEL_VGCOMP3 = 0x22,
>> + RT5033_FUEL_VGCOMP4 = 0x23,
>> + /* Reserved 0x24~0xFD */
>> + RT5033_FUEL_MFA_H = 0xFE,
>> + RT5033_FUEL_MFA_L = 0xFF,
>> +
>> + RT5033_FUEL_REG_END,
>> +};
>> +
>> +/* RT5033 fuel gauge battery present property */
>> +#define RT5033_FUEL_BAT_PRESENT 0x02
>> +
>> +/* RT5033 PMIC interrupts */
>> +#define RT5033_PMIC_IRQ_BUCKOCP 2
>> +#define RT5033_PMIC_IRQ_BUCKLV 3
>> +#define RT5033_PMIC_IRQ_SAFELDOLV 4
>> +#define RT5033_PMIC_IRQ_LDOLV 5
>> +#define RT5033_PMIC_IRQ_OT 6
>> +#define RT5033_PMIC_IRQ_VDDA_UV 7
>> +
>> +#endif /* __RT5033_PRIVATE_H__ */
>> diff --git a/include/linux/mfd/rt5033.h b/include/linux/mfd/rt5033.h
>> new file mode 100644
>> index 0000000..010cff4
>> --- /dev/null
>> +++ b/include/linux/mfd/rt5033.h
>> @@ -0,0 +1,62 @@
>> +/*
>> + * MFD core driver for the RT5033
>> + *
>> + * Copyright (C) 2014 Samsung Electronics
>> + * Author: Beomho Seo <beomho.seo@...sung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published bythe Free Software Foundation.
>> + */
>> +
>> +#ifndef __RT5033_H__
>> +#define __RT5033_H__
>> +
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/i2c.h>
>> +#include <linux/regmap.h>
>> +#include <linux/power_supply.h>
>> +
>> +/* RT5033 regulator IDs */
>> +enum rt5033_regulators {
>> + RT5033_BUCK = 0,
>> + RT5033_LDO,
>> + RT5033_SAFE_LDO,
>> +
>> + RT5033_REGULATOR_NUM,
>> +};
>> +
>> +struct rt5033_dev {
>> + struct device *dev;
>> +
>> + struct regmap *regmap;
>> + struct regmap_irq_chip_data *irq_data;
>> + int irq;
>> + bool wakeup;
>> +};
>> +
>> +struct rt5033_battery {
>> + struct i2c_client *client;
>> + struct rt5033_dev *rt5033;
>> + struct regmap *regmap;
>> + struct power_supply psy;
>> +};
>> +
>> +/* RT5033 charger platform data */
>> +struct rt5033_charger_data {
>> + unsigned int pre_uamp;
>> + unsigned int pre_uvolt;
>> + unsigned int const_uvolt;
>> + unsigned int eoc_uamp;
>> + unsigned int fast_uamp;
>> +};
>> +
>> +struct rt5033_charger {
>> + struct device *dev;
>> + struct rt5033_dev *rt5033;
>> + struct power_supply psy;
>> +
>> + struct rt5033_charger_data *chg;
>> +};
>> +
>> +#endif /* __RT5033_H__ */
>
Best regards,
Beomho Seo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists