linux-kernel - [PATCH 3/3] mfd: dln2: add suspend/resume functionality

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1418302951-9309-4-git-send-email-octavian.purdila@intel.com>
Date:	Thu, 11 Dec 2014 15:02:31 +0200
From:	Octavian Purdila <octavian.purdila@...el.com>
To:	linus.walleij@...aro.org, lee.jones@...aro.org
Cc:	johan@...nel.org, linux-usb@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
	Octavian Purdila <octavian.purdila@...el.com>
Subject: [PATCH 3/3] mfd: dln2: add suspend/resume functionality

Without suspend/resume functionality in the USB driver the USB core
will disconnect and reconnect the DLN2 port and because the GPIO
framework does not yet support removal of an in-use controller a
suspend/resume operation will result in a crash.

This patch provides suspend and resume functions for the DLN2 driver
so that the above scenario is avoided.

Signed-off-by: Octavian Purdila <octavian.purdila@...el.com>
---
 drivers/mfd/dln2.c | 41 ++++++++++++++++++++++++++++++++++++++---
 1 file changed, 38 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c
index 6d49685..08c403c 100644
--- a/drivers/mfd/dln2.c
+++ b/drivers/mfd/dln2.c
@@ -587,7 +587,6 @@ static void dln2_free_rx_urbs(struct dln2_dev *dln2)
 	int i;
 
 	for (i = 0; i < DLN2_MAX_URBS; i++) {
-		usb_kill_urb(dln2->rx_urb[i]);
 		usb_free_urb(dln2->rx_urb[i]);
 		kfree(dln2->rx_buf[i]);
 	}
@@ -665,9 +664,8 @@ static const struct mfd_cell dln2_devs[] = {
 	},
 };
 
-static void dln2_disconnect(struct usb_interface *interface)
+static void dln2_stop(struct dln2_dev *dln2)
 {
-	struct dln2_dev *dln2 = usb_get_intfdata(interface);
 	int i, j;
 
 	/* don't allow starting new transfers */
@@ -696,6 +694,16 @@ static void dln2_disconnect(struct usb_interface *interface)
 	/* wait for transfers to end */
 	wait_event(dln2->disconnect_wq, !dln2->active_transfers);
 
+	for (i = 0; i < DLN2_MAX_URBS; i++)
+		usb_kill_urb(dln2->rx_urb[i]);
+}
+
+static void dln2_disconnect(struct usb_interface *interface)
+{
+	struct dln2_dev *dln2 = usb_get_intfdata(interface);
+
+	dln2_stop(dln2);
+
 	mfd_remove_devices(&interface->dev);
 
 	dln2_free(dln2);
@@ -767,11 +775,38 @@ static const struct usb_device_id dln2_table[] = {
 
 MODULE_DEVICE_TABLE(usb, dln2_table);
 
+static int dln2_suspend(struct usb_interface *iface, pm_message_t message)
+{
+	struct dln2_dev *dln2 = usb_get_intfdata(iface);
+
+	dln2_stop(dln2);
+	return 0;
+}
+
+static int dln2_resume(struct usb_interface *iface)
+{
+	struct dln2_dev *dln2 = usb_get_intfdata(iface);
+	int i;
+	int ret = 0;
+
+	dln2->disconnect = false;
+
+	for (i = 0; i < DLN2_MAX_URBS; i++) {
+		ret = usb_submit_urb(dln2->rx_urb[i], GFP_KERNEL);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
 static struct usb_driver dln2_driver = {
 	.name = "dln2",
 	.probe = dln2_probe,
 	.disconnect = dln2_disconnect,
 	.id_table = dln2_table,
+	.suspend = dln2_suspend,
+	.resume = dln2_resume,
 };
 
 module_usb_driver(dln2_driver);
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/