lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Fri, 12 Dec 2014 10:27:32 +0800
From:	Dudley Du <dudley.dulixin@...il.com>
To:	dmitry.torokhov@...il.com, rydberg@...omail.se
Cc:	Dudley Du <dudley.dulixin@...il.com>, bleung@...gle.com,
	linux-input@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v14 02/12] input: cyapa: add gen5 trackpad device basic functions support

Based on the cyapa core, add the gen5 trackpad device's basic functions
supported, so gen5 trackpad device can work with kernel input system.
And also based on the state parse interface, the cyapa driver can
automatically determine the attached is gen3 or gen5 protocol trackpad
device, then set the correct protocol to work with the attached
trackpad device.
TEST=test on Chromebooks.

Signed-off-by: Dudley Du <dudley.dulixin@...il.com>
---
 drivers/input/mouse/Makefile     |    2 +-
 drivers/input/mouse/cyapa.c      |   13 +
 drivers/input/mouse/cyapa.h      |    1 +
 drivers/input/mouse/cyapa_gen5.c | 1660 ++++++++++++++++++++++++++++++++++++++
 4 files changed, 1675 insertions(+), 1 deletion(-)
 create mode 100644 drivers/input/mouse/cyapa_gen5.c

diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 8bd950d..8a9c98e 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -24,7 +24,7 @@ obj-$(CONFIG_MOUSE_SYNAPTICS_I2C)	+= synaptics_i2c.o
 obj-$(CONFIG_MOUSE_SYNAPTICS_USB)	+= synaptics_usb.o
 obj-$(CONFIG_MOUSE_VSXXXAA)		+= vsxxxaa.o
 
-cyapatp-objs := cyapa.o cyapa_gen3.o
+cyapatp-objs := cyapa.o cyapa_gen3.o cyapa_gen5.o
 psmouse-objs := psmouse-base.o synaptics.o focaltech.o
 
 psmouse-$(CONFIG_MOUSE_PS2_ALPS)	+= alps.o
diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
index ec25445..72eb44a 100644
--- a/drivers/input/mouse/cyapa.c
+++ b/drivers/input/mouse/cyapa.c
@@ -164,6 +164,14 @@ static int cyapa_get_state(struct cyapa *cyapa)
 			if (!error)
 				goto out_detected;
 		}
+		if ((cyapa->gen == CYAPA_GEN_UNKNOWN ||
+				cyapa->gen == CYAPA_GEN5) &&
+			!smbus && even_addr) {
+			error = cyapa_gen5_ops.state_parse(cyapa,
+					status, BL_STATUS_SIZE);
+			if (!error)
+				goto out_detected;
+		}
 
 		/*
 		 * Write 0x00 0x00 to trackpad device to force update its
@@ -247,6 +255,9 @@ static int cyapa_check_is_operational(struct cyapa *cyapa)
 		return error;
 
 	switch (cyapa->gen) {
+	case CYAPA_GEN5:
+		cyapa->ops = &cyapa_gen5_ops;
+		break;
 	case CYAPA_GEN3:
 		cyapa->ops = &cyapa_gen3_ops;
 		break;
@@ -483,6 +494,8 @@ static int cyapa_initialize(struct cyapa *cyapa)
 
 	if (cyapa_gen3_ops.initialize)
 		error = cyapa_gen3_ops.initialize(cyapa);
+	if (!error && cyapa_gen5_ops.initialize)
+		error = cyapa_gen5_ops.initialize(cyapa);
 	if (error)
 		return error;
 
diff --git a/drivers/input/mouse/cyapa.h b/drivers/input/mouse/cyapa.h
index d79eeb1..4a73081 100644
--- a/drivers/input/mouse/cyapa.h
+++ b/drivers/input/mouse/cyapa.h
@@ -312,5 +312,6 @@ u16 cyapa_pwr_cmd_to_sleep_time(u8 pwr_mode);
 
 extern const char unique_str[];
 extern const struct cyapa_dev_ops cyapa_gen3_ops;
+extern const struct cyapa_dev_ops cyapa_gen5_ops;
 
 #endif
diff --git a/drivers/input/mouse/cyapa_gen5.c b/drivers/input/mouse/cyapa_gen5.c
new file mode 100644
index 0000000..c2340ae
--- /dev/null
+++ b/drivers/input/mouse/cyapa_gen5.c
@@ -0,0 +1,1660 @@
+/*
+ * Cypress APA trackpad with I2C interface
+ *
+ * Author: Dudley Du <dudl@...ress.com>
+ *
+ * Copyright (C) 2014 Cypress Semiconductor, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/mutex.h>
+#include <linux/completion.h>
+#include <linux/slab.h>
+#include <linux/unaligned/access_ok.h>
+#include "cyapa.h"
+
+
+/* Macro of Gen5 */
+#define RECORD_EVENT_NONE        0
+#define RECORD_EVENT_TOUCHDOWN	 1
+#define RECORD_EVENT_DISPLACE    2
+#define RECORD_EVENT_LIFTOFF     3
+
+#define CYAPA_TSG_FLASH_MAP_BLOCK_SIZE      0x80
+#define CYAPA_TSG_IMG_FW_HDR_SIZE           13
+#define CYAPA_TSG_FW_ROW_SIZE               (CYAPA_TSG_FLASH_MAP_BLOCK_SIZE)
+#define CYAPA_TSG_IMG_START_ROW_NUM         0x002e
+#define CYAPA_TSG_IMG_END_ROW_NUM           0x01fe
+#define CYAPA_TSG_IMG_APP_INTEGRITY_ROW_NUM 0x01ff
+#define CYAPA_TSG_IMG_MAX_RECORDS           (CYAPA_TSG_IMG_END_ROW_NUM - \
+				CYAPA_TSG_IMG_START_ROW_NUM + 1 + 1)
+#define CYAPA_TSG_IMG_READ_SIZE             (CYAPA_TSG_FLASH_MAP_BLOCK_SIZE / 2)
+#define CYAPA_TSG_START_OF_APPLICATION      0x1700
+#define CYAPA_TSG_APP_INTEGRITY_SIZE        60
+#define CYAPA_TSG_FLASH_MAP_METADATA_SIZE   60
+#define CYAPA_TSG_BL_KEY_SIZE               8
+
+/* Macro definitions for Gen5 trackpad device. */
+#define GEN5_TOUCH_REPORT_HEAD_SIZE     7
+#define GEN5_TOUCH_REPORT_MAX_SIZE      127
+#define GEN5_BTN_REPORT_HEAD_SIZE       6
+#define GEN5_BTN_REPORT_MAX_SIZE        14
+#define GEN5_WAKEUP_EVENT_SIZE          4
+#define GEN5_RAW_DATA_HEAD_SIZE         24
+
+#define GEN5_BL_CMD_REPORT_ID           0x40
+#define GEN5_BL_RESP_REPORT_ID          0x30
+#define GEN5_APP_CMD_REPORT_ID          0x2f
+#define GEN5_APP_RESP_REPORT_ID         0x1f
+
+#define GEN5_APP_DEEP_SLEEP_REPORT_ID   0xf0
+#define GEN5_DEEP_SLEEP_RESP_LENGTH     5
+
+#define GEN5_PARAMETER_ACT_INTERVL_ID        0x4d
+#define GEN5_PARAMETER_ACT_INTERVL_SIZE      1
+#define GEN5_PARAMETER_ACT_LFT_INTERVL_ID    0x4f
+#define GEN5_PARAMETER_ACT_LFT_INTERVL_SIZE  2
+#define GEN5_PARAMETER_LP_INTRVL_ID          0x4c
+#define GEN5_PARAMETER_LP_INTRVL_SIZE        2
+
+#define GEN5_PARAMETER_DISABLE_PIP_REPORT    0x08
+
+#define GEN5_POWER_STATE_ACTIVE              0x01
+#define GEN5_POWER_STATE_LOOK_FOR_TOUCH      0x02
+#define GEN5_POWER_STATE_READY               0x03
+#define GEN5_POWER_STATE_IDLE                0x04
+#define GEN5_POWER_STATE_BTN_ONLY            0x05
+#define GEN5_POWER_STATE_OFF                 0x06
+
+#define GEN5_DEEP_SLEEP_STATE_MASK  0x03
+#define GEN5_DEEP_SLEEP_STATE_ON    0x00
+#define GEN5_DEEP_SLEEP_STATE_OFF   0x01
+
+#define GEN5_DEEP_SLEEP_OPCODE      0x08
+#define GEN5_DEEP_SLEEP_OPCODE_MASK 0x0f
+
+#define GEN5_POWER_READY_MAX_INTRVL_TIME  50   /* Unit: ms */
+#define GEN5_POWER_IDLE_MAX_INTRVL_TIME   250  /* Unit: ms */
+
+#define GEN5_CMD_REPORT_ID_OFFSET       4
+
+#define GEN5_RESP_REPORT_ID_OFFSET      2
+#define GEN5_RESP_RSVD_OFFSET           3
+#define     GEN5_RESP_RSVD_KEY          0x00
+#define GEN5_RESP_BL_SOP_OFFSET         4
+#define     GEN5_SOP_KEY                0x01  /* Start of Packet */
+#define     GEN5_EOP_KEY                0x17  /* End of Packet */
+#define GEN5_RESP_APP_CMD_OFFSET        4
+#define     GET_GEN5_CMD_CODE(reg)      ((reg) & 0x7f)
+
+#define VALID_CMD_RESP_HEADER(resp, cmd)				    \
+	(((resp)[GEN5_RESP_REPORT_ID_OFFSET] == GEN5_APP_RESP_REPORT_ID) && \
+	((resp)[GEN5_RESP_RSVD_OFFSET] == GEN5_RESP_RSVD_KEY) &&	    \
+	(GET_GEN5_CMD_CODE((resp)[GEN5_RESP_APP_CMD_OFFSET]) == (cmd)))
+
+#define GEN5_MIN_BL_CMD_LENGTH           13
+#define GEN5_MIN_BL_RESP_LENGTH          11
+#define GEN5_MIN_APP_CMD_LENGTH          7
+#define GEN5_MIN_APP_RESP_LENGTH         5
+#define GEN5_UNSUPPORTED_CMD_RESP_LENGTH 6
+
+#define GEN5_RESP_LENGTH_OFFSET  0x00
+#define GEN5_RESP_LENGTH_SIZE    2
+
+#define GEN5_HID_DESCRIPTOR_SIZE      32
+#define GEN5_BL_HID_REPORT_ID         0xff
+#define GEN5_APP_HID_REPORT_ID        0xf7
+#define GEN5_BL_MAX_OUTPUT_LENGTH     0x0100
+#define GEN5_APP_MAX_OUTPUT_LENGTH    0x00fe
+
+#define GEN5_BL_REPORT_DESCRIPTOR_SIZE            0x1d
+#define GEN5_BL_REPORT_DESCRIPTOR_ID              0xfe
+#define GEN5_APP_REPORT_DESCRIPTOR_SIZE           0xee
+#define GEN5_APP_CONTRACT_REPORT_DESCRIPTOR_SIZE  0xfa
+#define GEN5_APP_REPORT_DESCRIPTOR_ID             0xf6
+
+#define GEN5_TOUCH_REPORT_ID         0x01
+#define GEN5_BTN_REPORT_ID           0x03
+#define GEN5_WAKEUP_EVENT_REPORT_ID  0x04
+#define GEN5_OLD_PUSH_BTN_REPORT_ID  0x05
+#define GEN5_PUSH_BTN_REPORT_ID      0x06
+
+#define GEN5_CMD_COMPLETE_SUCCESS(status) ((status) == 0x00)
+
+#define GEN5_BL_INITIATE_RESP_LEN            11
+#define GEN5_BL_FAIL_EXIT_RESP_LEN           11
+#define GEN5_BL_FAIL_EXIT_STATUS_CODE        0x0c
+#define GEN5_BL_VERIFY_INTEGRITY_RESP_LEN    12
+#define GEN5_BL_INTEGRITY_CHEKC_PASS         0x00
+#define GEN5_BL_BLOCK_WRITE_RESP_LEN         11
+#define GEN5_BL_READ_APP_INFO_RESP_LEN       31
+#define GEN5_CMD_CALIBRATE                   0x28
+#define CYAPA_SENSING_MODE_MUTUAL_CAP_FINE   0x00
+#define CYAPA_SENSING_MODE_SELF_CAP          0x02
+
+#define GEN5_CMD_RETRIEVE_DATA_STRUCTURE     0x24
+#define GEN5_RETRIEVE_MUTUAL_PWC_DATA        0x00
+#define GEN5_RETRIEVE_SELF_CAP_PWC_DATA      0x01
+
+#define GEN5_RETRIEVE_DATA_ELEMENT_SIZE_MASK 0x07
+
+#define GEN5_CMD_EXECUTE_PANEL_SCAN          0x2a
+#define GEN5_CMD_RETRIEVE_PANEL_SCAN         0x2b
+#define GEN5_PANEL_SCAN_MUTUAL_RAW_DATA      0x00
+#define GEN5_PANEL_SCAN_MUTUAL_BASELINE      0x01
+#define GEN5_PANEL_SCAN_MUTUAL_DIFFCOUNT     0x02
+#define GEN5_PANEL_SCAN_SELF_RAW_DATA        0x03
+#define GEN5_PANEL_SCAN_SELF_BASELINE        0x04
+#define GEN5_PANEL_SCAN_SELF_DIFFCOUNT       0x05
+
+#define GEN5_PWC_DATA_ELEMENT_SIZE_MASK      0x07
+
+#define	GEN5_NUMBER_OF_TOUCH_OFFSET  5
+#define GEN5_NUMBER_OF_TOUCH_MASK    0x1f
+#define GEN5_BUTTONS_OFFSET          5
+#define GEN5_BUTTONS_MASK            0x0f
+#define GEN5_GET_EVENT_ID(reg)       (((reg) >> 5) & 0x03)
+#define GEN5_GET_TOUCH_ID(reg)       ((reg) & 0x1f)
+
+#define GEN5_PRODUCT_FAMILY_MASK        0xf000
+#define GEN5_PRODUCT_FAMILY_TRACKPAD    0x1000
+
+#define TSG_INVALID_CMD   0xff
+
+struct cyapa_gen5_touch_record {
+	/*
+	 * Bit 7 - 3: reserved
+	 * Bit 2 - 0: touch type;
+	 *            0 : standard finger;
+	 *            1 - 15 : reserved.
+	 */
+	u8 touch_type;
+
+	/*
+	 * Bit 7: indicates touch liftoff status.
+	 *		0 : touch is currently on the panel.
+	 *		1 : touch record indicates a liftoff.
+	 * Bit 6 - 5: indicates an event associated with this touch instance
+	 *		0 : no event
+	 *		1 : touchdown
+	 *		2 : significant displacement (> active distance)
+	 *		3 : liftoff (record reports last known coordinates)
+	 * Bit 4 - 0: An arbitrary ID tag associated with a finger
+	 *		to allow tracking a touch as it moves around the panel.
+	 */
+	u8 touch_tip_event_id;
+
+	/* Bit 7 - 0 of X-axis corrinate of the touch in pixel. */
+	u8 x_lo;
+
+	/* Bit 15 - 8 of X-axis corrinate of the touch in pixel. */
+	u8 x_hi;
+
+	/* Bit 7 - 0 of Y-axis corrinate of the touch in pixel. */
+	u8 y_lo;
+
+	/* Bit 15 - 8 of Y-axis corrinate of the touch in pixel. */
+	u8 y_hi;
+
+	/* Touch intensity in counts, pressure value. */
+	u8 z;
+
+	/*
+	 * The length of the major axis of the ellipse of contact between
+	 * the finger and the panel (ABS_MT_TOUCH_MAJOR).
+	 */
+	u8 major_axis_len;
+
+	/*
+	 * The length of the minor axis of the ellipse of contact between
+	 * the finger and the panel (ABS_MT_TOUCH_MINOR).
+	 */
+	u8 minor_axis_len;
+
+	/*
+	 * The length of the major axis of the approaching tool.
+	 * (ABS_MT_WIDTH_MAJOR)
+	 */
+	u8 major_tool_len;
+
+	/*
+	 * The length of the minor axis of the approaching tool.
+	 * (ABS_MT_WIDTH_MINOR)
+	 */
+	u8 minor_tool_len;
+
+	/*
+	 * The angle between the panel vertical axis and
+	 * the major axis of the contact ellipse. This value is an 8-bit
+	 * signed integer. The range is -127 to +127 (corresponding to
+	 * -90 degree and +90 degree respectively).
+	 * The positive direction is clockwise from the vertical axis.
+	 * If the ellipse of contact degenerates into a circle,
+	 * orientation is reported as 0.
+	 */
+	u8 orientation;
+} __packed;
+
+struct cyapa_gen5_report_data {
+	u8 report_head[GEN5_TOUCH_REPORT_HEAD_SIZE];
+	struct cyapa_gen5_touch_record touch_records[10];
+} __packed;
+
+struct cyapa_tsg_bin_image_data_record {
+	u8 flash_array_id;
+	__be16 row_number;
+	/* The number of bytes of flash data contained in this record. */
+	__be16 record_len;
+	/* The flash program data. */
+	u8 record_data[CYAPA_TSG_FW_ROW_SIZE];
+} __packed;
+
+struct cyapa_tsg_bin_image {
+	struct cyapa_tsg_bin_image_head image_head;
+	struct cyapa_tsg_bin_image_data_record records[0];
+} __packed;
+
+/* Variables to record latest gen5 trackpad power states. */
+#define GEN5_DEV_SET_PWR_STATE(cyapa, s)	((cyapa)->dev_pwr_mode = (s))
+#define GEN5_DEV_GET_PWR_STATE(cyapa)		((cyapa)->dev_pwr_mode)
+#define GEN5_DEV_SET_SLEEP_TIME(cyapa, t)	((cyapa)->dev_sleep_time = (t))
+#define GEN5_DEV_GET_SLEEP_TIME(cyapa)		((cyapa)->dev_sleep_time)
+#define GEN5_DEV_UNINIT_SLEEP_TIME(cyapa)	\
+		(((cyapa)->dev_sleep_time) == UNINIT_SLEEP_TIME)
+
+
+static int cyapa_gen5_initialize(struct cyapa *cyapa)
+{
+	struct cyapa_gen5_cmd_states *gen5_pip = &cyapa->cmd_states.gen5;
+
+	init_completion(&gen5_pip->cmd_ready);
+	atomic_set(&gen5_pip->cmd_issued, 0);
+	mutex_init(&gen5_pip->cmd_lock);
+
+	gen5_pip->resp_sort_func = NULL;
+	gen5_pip->in_progress_cmd = TSG_INVALID_CMD;
+	gen5_pip->resp_data = NULL;
+	gen5_pip->resp_len = NULL;
+
+	cyapa->dev_pwr_mode = UNINIT_PWR_MODE;
+	cyapa->dev_sleep_time = UNINIT_SLEEP_TIME;
+
+	return 0;
+}
+
+/* Return negative errno, or else the number of bytes read. */
+static ssize_t cyapa_i2c_pip_read(struct cyapa *cyapa, u8 *buf, size_t size)
+{
+	int ret;
+
+	if (size == 0)
+		return 0;
+
+	if (!buf || size > CYAPA_REG_MAP_SIZE)
+		return -EINVAL;
+
+	ret = i2c_master_recv(cyapa->client, buf, size);
+
+	if (ret != size)
+		return (ret < 0) ? ret : -EIO;
+
+	return size;
+}
+
+/**
+ * Return a negative errno code else zero on success.
+ */
+static ssize_t cyapa_i2c_pip_write(struct cyapa *cyapa, u8 *buf, size_t size)
+{
+	int ret;
+
+	if (!buf || !size)
+		return -EINVAL;
+
+	ret = i2c_master_send(cyapa->client, buf, size);
+
+	if (ret != size)
+		return (ret < 0) ? ret : -EIO;
+
+	return 0;
+}
+
+/**
+ * This function is aimed to dump all not read data in Gen5 trackpad
+ * before send any command, otherwise, the interrupt line will be blocked.
+ */
+int cyapa_empty_pip_output_data(struct cyapa *cyapa,
+		u8 *buf, int *len, cb_sort func)
+{
+	struct cyapa_gen5_cmd_states *gen5_pip = &cyapa->cmd_states.gen5;
+	int length;
+	int report_count;
+	int empty_count;
+	int buf_len;
+	int error;
+
+	buf_len = 0;
+	if (len) {
+		buf_len = (*len < CYAPA_REG_MAP_SIZE) ?
+				*len : CYAPA_REG_MAP_SIZE;
+		*len = 0;
+	}
+
+	report_count = 8;  /* max 7 pending data before command response data */
+	empty_count = 0;
+	do {
+		/*
+		 * Depnding on testing in cyapa driver, there are max 5 "02 00"
+		 * packets between two valid buffered data report in firmware.
+		 * So in order to dump all buffered data out and
+		 * make interrupt line release for reassert again,
+		 * we must set the empty_count check value bigger than 5 to
+		 * make it work. Otherwise, in some situation,
+		 * the interrupt line may unable to reactive again,
+		 * which will cause trackpad device unable to
+		 * report data any more.
+		 * for example, it may happen in EFT and ESD testing.
+		 */
+		if (empty_count > 5)
+			return 0;
+
+		error = cyapa_i2c_pip_read(cyapa, gen5_pip->empty_buf,
+				GEN5_RESP_LENGTH_SIZE);
+		if (error < 0)
+			return error;
+
+		length = get_unaligned_le16(gen5_pip->empty_buf);
+		if (length == GEN5_RESP_LENGTH_SIZE) {
+			empty_count++;
+			continue;
+		} else if (length > CYAPA_REG_MAP_SIZE) {
+			/* Should not happen */
+			return -EINVAL;
+		} else if (length == 0) {
+			/* Application or bootloader launch data polled out. */
+			length = GEN5_RESP_LENGTH_SIZE;
+			if (buf && buf_len && func &&
+				func(cyapa, gen5_pip->empty_buf, length)) {
+				length = min(buf_len, length);
+				memcpy(buf, gen5_pip->empty_buf, length);
+				*len = length;
+				/* Response found, success. */
+				return 0;
+			}
+			continue;
+		}
+
+		error = cyapa_i2c_pip_read(cyapa, gen5_pip->empty_buf, length);
+		if (error < 0)
+			return error;
+
+		report_count--;
+		empty_count = 0;
+		length = get_unaligned_le16(gen5_pip->empty_buf);
+		if (length <= GEN5_RESP_LENGTH_SIZE) {
+			empty_count++;
+		} else if (buf && buf_len && func &&
+			func(cyapa, gen5_pip->empty_buf, length)) {
+			length = min(buf_len, length);
+			memcpy(buf, gen5_pip->empty_buf, length);
+			*len = length;
+			/* Response found, success. */
+			return 0;
+		}
+
+		error = -EINVAL;
+	} while (report_count);
+
+	return error;
+}
+
+static int cyapa_do_i2c_pip_cmd_irq_sync(
+		struct cyapa *cyapa,
+		u8 *cmd, size_t cmd_len,
+		unsigned long timeout)
+{
+	int error;
+	struct cyapa_gen5_cmd_states *gen5_pip = &cyapa->cmd_states.gen5;
+
+	/* Wait for interrupt to set ready completion */
+	init_completion(&gen5_pip->cmd_ready);
+
+	atomic_inc(&gen5_pip->cmd_issued);
+	error = cyapa_i2c_pip_write(cyapa, cmd, cmd_len);
+	if (error) {
+		atomic_dec(&gen5_pip->cmd_issued);
+		return (error < 0) ? error : -EIO;
+	}
+
+	/* Wait for interrupt to indicate command is completed. */
+	timeout = wait_for_completion_timeout(&gen5_pip->cmd_ready,
+				msecs_to_jiffies(timeout));
+	if (timeout == 0) {
+		atomic_dec(&gen5_pip->cmd_issued);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int cyapa_do_i2c_pip_cmd_polling(
+		struct cyapa *cyapa,
+		u8 *cmd, size_t cmd_len,
+		u8 *resp_data, int *resp_len,
+		unsigned long timeout,
+		cb_sort func)
+{
+	int error;
+	int tries;
+	int length;
+	struct cyapa_gen5_cmd_states *gen5_pip = &cyapa->cmd_states.gen5;
+
+	atomic_inc(&gen5_pip->cmd_issued);
+	error = cyapa_i2c_pip_write(cyapa, cmd, cmd_len);
+	if (error) {
+		atomic_dec(&gen5_pip->cmd_issued);
+		return error < 0 ? error : -EIO;
+	}
+
+	tries = timeout / 5;
+	length = resp_len ? *resp_len : 0;
+	if (resp_data && resp_len && length != 0 && func) {
+		do {
+			usleep_range(3000, 5000);
+			*resp_len = length;
+			error = cyapa_empty_pip_output_data(cyapa,
+					resp_data, resp_len, func);
+			if (error || *resp_len == 0)
+				continue;
+			else
+				break;
+		} while (--tries > 0);
+		if ((error || *resp_len == 0) || tries <= 0)
+			error = error ? error : -ETIMEDOUT;
+	}
+
+	atomic_dec(&gen5_pip->cmd_issued);
+	return error;
+}
+
+static int cyapa_i2c_pip_cmd_irq_sync(
+		struct cyapa *cyapa,
+		u8 *cmd, int cmd_len,
+		u8 *resp_data, int *resp_len,
+		unsigned long timeout,
+		cb_sort func,
+		bool irq_mode)
+{
+	int error;
+	struct cyapa_gen5_cmd_states *gen5_pip = &cyapa->cmd_states.gen5;
+
+	if (!cmd || !cmd_len)
+		return -EINVAL;
+
+	/* Commands must be serialized. */
+	error = mutex_lock_interruptible(&gen5_pip->cmd_lock);
+	if (error)
+		return error;
+
+	gen5_pip->resp_sort_func = func;
+	gen5_pip->resp_data = resp_data;
+	gen5_pip->resp_len = resp_len;
+
+	if (cmd_len >= GEN5_MIN_APP_CMD_LENGTH &&
+			cmd[4] == GEN5_APP_CMD_REPORT_ID) {
+		/* Application command */
+		gen5_pip->in_progress_cmd = cmd[6] & 0x7f;
+	} else if (cmd_len >= GEN5_MIN_BL_CMD_LENGTH &&
+			cmd[4] == GEN5_BL_CMD_REPORT_ID) {
+		/* Bootloader command */
+		gen5_pip->in_progress_cmd = cmd[7];
+	}
+
+	/* Send command data, wait and read output response data's length. */
+	if (irq_mode) {
+		gen5_pip->is_irq_mode = true;
+		error = cyapa_do_i2c_pip_cmd_irq_sync(cyapa, cmd, cmd_len,
+							timeout);
+		if (error == -ETIMEDOUT && resp_data &&
+				resp_len && *resp_len != 0 && func) {
+			/*
+			 * For some old version, there was no interrupt for
+			 * the command response data, so need to poll here
+			 * to try to get the response data.
+			 */
+			error = cyapa_empty_pip_output_data(cyapa,
+					resp_data, resp_len, func);
+			if (error || *resp_len == 0)
+				error = error ? error : -ETIMEDOUT;
+		}
+	} else {
+		gen5_pip->is_irq_mode = false;
+		error = cyapa_do_i2c_pip_cmd_polling(cyapa, cmd, cmd_len,
+				resp_data, resp_len, timeout, func);
+	}
+
+	gen5_pip->resp_sort_func = NULL;
+	gen5_pip->resp_data = NULL;
+	gen5_pip->resp_len = NULL;
+	gen5_pip->in_progress_cmd = TSG_INVALID_CMD;
+
+	mutex_unlock(&gen5_pip->cmd_lock);
+	return error;
+}
+
+bool cyapa_gen5_sort_tsg_pip_bl_resp_data(struct cyapa *cyapa,
+		u8 *data, int len)
+{
+	if (!data || len < GEN5_MIN_BL_RESP_LENGTH)
+		return false;
+
+	/* Bootloader input report id 30h */
+	if (data[GEN5_RESP_REPORT_ID_OFFSET] == GEN5_BL_RESP_REPORT_ID &&
+			data[GEN5_RESP_RSVD_OFFSET] == GEN5_RESP_RSVD_KEY &&
+			data[GEN5_RESP_BL_SOP_OFFSET] == GEN5_SOP_KEY)
+		return true;
+
+	return false;
+}
+
+bool cyapa_gen5_sort_tsg_pip_app_resp_data(struct cyapa *cyapa,
+		u8 *data, int len)
+{
+	int resp_len;
+	struct cyapa_gen5_cmd_states *gen5_pip = &cyapa->cmd_states.gen5;
+
+	if (!data || len < GEN5_MIN_APP_RESP_LENGTH)
+		return false;
+
+	if (data[GEN5_RESP_REPORT_ID_OFFSET] == GEN5_APP_RESP_REPORT_ID &&
+			data[GEN5_RESP_RSVD_OFFSET] == GEN5_RESP_RSVD_KEY) {
+		resp_len = get_unaligned_le16(&data[GEN5_RESP_LENGTH_OFFSET]);
+		if (GET_GEN5_CMD_CODE(data[GEN5_RESP_APP_CMD_OFFSET]) == 0x00 &&
+			resp_len == GEN5_UNSUPPORTED_CMD_RESP_LENGTH &&
+			data[5] == gen5_pip->in_progress_cmd) {
+			/* Unsupported command code */
+			return false;
+		} else if (GET_GEN5_CMD_CODE(data[GEN5_RESP_APP_CMD_OFFSET]) ==
+				gen5_pip->in_progress_cmd) {
+			/* Correct command response received */
+			return true;
+		}
+	}
+
+	return false;
+}
+
+bool cyapa_gen5_sort_application_launch_data(struct cyapa *cyapa,
+		u8 *buf, int len)
+{
+	if (buf == NULL || len < GEN5_RESP_LENGTH_SIZE)
+		return false;
+
+	/*
+	 * After reset or power on, trackpad device always sets to 0x00 0x00
+	 * to indicate a reset or power on event.
+	 */
+	if (buf[0] == 0 && buf[1] == 0)
+		return true;
+
+	return false;
+}
+
+static bool cyapa_gen5_sort_hid_descriptor_data(struct cyapa *cyapa,
+		u8 *buf, int len)
+{
+	int resp_len;
+	int max_output_len;
+
+	/* Check hid descriptor. */
+	if (len != GEN5_HID_DESCRIPTOR_SIZE)
+		return false;
+
+	resp_len = get_unaligned_le16(&buf[GEN5_RESP_LENGTH_OFFSET]);
+	max_output_len = get_unaligned_le16(&buf[16]);
+	if (resp_len == GEN5_HID_DESCRIPTOR_SIZE) {
+		if (buf[GEN5_RESP_REPORT_ID_OFFSET] == GEN5_BL_HID_REPORT_ID &&
+				max_output_len == GEN5_BL_MAX_OUTPUT_LENGTH) {
+			/* BL mode HID Descriptor */
+			return true;
+		} else if (buf[2] == GEN5_APP_HID_REPORT_ID &&
+				max_output_len == GEN5_APP_MAX_OUTPUT_LENGTH) {
+			/* APP mode HID Descriptor */
+			return true;
+		}
+	}
+
+	return false;
+}
+
+static bool cyapa_gen5_sort_deep_sleep_data(struct cyapa *cyapa,
+		u8 *buf, int len)
+{
+	if (len == GEN5_DEEP_SLEEP_RESP_LENGTH &&
+		buf[GEN5_RESP_REPORT_ID_OFFSET] ==
+			GEN5_APP_DEEP_SLEEP_REPORT_ID &&
+		(buf[4] & GEN5_DEEP_SLEEP_OPCODE_MASK) ==
+			GEN5_DEEP_SLEEP_OPCODE)
+		return true;
+	return false;
+}
+
+static int gen5_idle_state_parse(struct cyapa *cyapa)
+{
+	int ret;
+	int error;
+	int length;
+	u8 cmd[2];
+	u8 resp_data[GEN5_HID_DESCRIPTOR_SIZE];
+	int max_output_len;
+
+	/*
+	 * Dump all buffered data firstly for the situation
+	 * when the trackpad is just power on the cyapa go here.
+	 */
+	cyapa_empty_pip_output_data(cyapa, NULL, NULL, NULL);
+
+	memset(resp_data, 0, sizeof(resp_data));
+	ret = cyapa_i2c_pip_read(cyapa, resp_data, 3);
+	if (ret != 3)
+		return ret < 0 ? ret : -EIO;
+
+	length = get_unaligned_le16(&resp_data[GEN5_RESP_LENGTH_OFFSET]);
+	if (length == GEN5_RESP_LENGTH_SIZE) {
+		/* Normal state of Gen5 with no data to respose */
+		cyapa->gen = CYAPA_GEN5;
+
+		cyapa_empty_pip_output_data(cyapa, NULL, NULL, NULL);
+
+		/* Read description from trackpad device */
+		cmd[0] = 0x01;
+		cmd[1] = 0x00;
+		length = GEN5_HID_DESCRIPTOR_SIZE;
+		error = cyapa_i2c_pip_cmd_irq_sync(cyapa,
+				cmd, GEN5_RESP_LENGTH_SIZE,
+				resp_data, &length,
+				300,
+				cyapa_gen5_sort_hid_descriptor_data,
+				false);
+		if (error)
+			return error;
+
+		length = get_unaligned_le16(
+				&resp_data[GEN5_RESP_LENGTH_OFFSET]);
+		max_output_len = get_unaligned_le16(&resp_data[16]);
+		if ((length == GEN5_HID_DESCRIPTOR_SIZE ||
+				length == GEN5_RESP_LENGTH_SIZE) &&
+			(resp_data[GEN5_RESP_REPORT_ID_OFFSET] ==
+				GEN5_BL_HID_REPORT_ID) &&
+			max_output_len == GEN5_BL_MAX_OUTPUT_LENGTH) {
+			/* BL mode HID Description read */
+			cyapa->state = CYAPA_STATE_GEN5_BL;
+		} else if ((length == GEN5_HID_DESCRIPTOR_SIZE ||
+				length == GEN5_RESP_LENGTH_SIZE) &&
+			(resp_data[GEN5_RESP_REPORT_ID_OFFSET] ==
+				GEN5_APP_HID_REPORT_ID) &&
+			max_output_len == GEN5_APP_MAX_OUTPUT_LENGTH) {
+			/* APP mode HID Description read */
+			cyapa->state = CYAPA_STATE_GEN5_APP;
+		} else {
+			/* Should not happen!!! */
+			cyapa->state = CYAPA_STATE_NO_DEVICE;
+		}
+	}
+
+	return 0;
+}
+
+static int gen5_hid_description_header_parse(struct cyapa *cyapa, u8 *reg_data)
+{
+	int ret;
+	int length;
+	u8 resp_data[32];
+	int max_output_len;
+
+	/* 0x20 0x00 0xF7 is Gen5 Application HID Description Header;
+	 * 0x20 0x00 0xFF is Gen5 Booloader HID Description Header.
+	 *
+	 * Must read HID Description content through out,
+	 * otherwise Gen5 trackpad cannot response next command
+	 * or report any touch or button data.
+	 */
+	ret = cyapa_i2c_pip_read(cyapa, resp_data,
+			GEN5_HID_DESCRIPTOR_SIZE);
+	if (ret != GEN5_HID_DESCRIPTOR_SIZE)
+		return ret < 0 ? ret : -EIO;
+	length = get_unaligned_le16(&resp_data[GEN5_RESP_LENGTH_OFFSET]);
+	max_output_len = get_unaligned_le16(&resp_data[16]);
+	if (length == GEN5_RESP_LENGTH_SIZE) {
+		if (reg_data[GEN5_RESP_REPORT_ID_OFFSET] ==
+				GEN5_BL_HID_REPORT_ID) {
+			/*
+			 * BL mode HID Description has been previously
+			 * read out.
+			 */
+			cyapa->gen = CYAPA_GEN5;
+			cyapa->state = CYAPA_STATE_GEN5_BL;
+		} else {
+			/*
+			 * APP mode HID Description has been previously
+			 * read out.
+			 */
+			cyapa->gen = CYAPA_GEN5;
+			cyapa->state = CYAPA_STATE_GEN5_APP;
+		}
+	} else if (length == GEN5_HID_DESCRIPTOR_SIZE &&
+			resp_data[2] == GEN5_BL_HID_REPORT_ID &&
+			max_output_len == GEN5_BL_MAX_OUTPUT_LENGTH) {
+		/* BL mode HID Description read. */
+		cyapa->gen = CYAPA_GEN5;
+		cyapa->state = CYAPA_STATE_GEN5_BL;
+	} else if (length == GEN5_HID_DESCRIPTOR_SIZE &&
+			(resp_data[GEN5_RESP_REPORT_ID_OFFSET] ==
+				GEN5_APP_HID_REPORT_ID) &&
+			max_output_len == GEN5_APP_MAX_OUTPUT_LENGTH) {
+		/* APP mode HID Description read. */
+		cyapa->gen = CYAPA_GEN5;
+		cyapa->state = CYAPA_STATE_GEN5_APP;
+	} else {
+		/* Should not happen!!! */
+		cyapa->state = CYAPA_STATE_NO_DEVICE;
+	}
+
+	return 0;
+}
+
+static int gen5_report_data_header_parse(struct cyapa *cyapa, u8 *reg_data)
+{
+	int length;
+
+	length = get_unaligned_le16(&reg_data[GEN5_RESP_LENGTH_OFFSET]);
+	switch (reg_data[GEN5_RESP_REPORT_ID_OFFSET]) {
+	case GEN5_TOUCH_REPORT_ID:
+		if (length < GEN5_TOUCH_REPORT_HEAD_SIZE ||
+			length > GEN5_TOUCH_REPORT_MAX_SIZE)
+			return -EINVAL;
+		break;
+	case GEN5_BTN_REPORT_ID:
+	case GEN5_OLD_PUSH_BTN_REPORT_ID:
+	case GEN5_PUSH_BTN_REPORT_ID:
+		if (length < GEN5_BTN_REPORT_HEAD_SIZE ||
+			length > GEN5_BTN_REPORT_MAX_SIZE)
+			return -EINVAL;
+		break;
+	case GEN5_WAKEUP_EVENT_REPORT_ID:
+		if (length != GEN5_WAKEUP_EVENT_SIZE)
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	cyapa->gen = CYAPA_GEN5;
+	cyapa->state = CYAPA_STATE_GEN5_APP;
+	return 0;
+}
+
+static int gen5_cmd_resp_header_parse(struct cyapa *cyapa, u8 *reg_data)
+{
+	int ret;
+	int length;
+	struct cyapa_gen5_cmd_states *gen5_pip = &cyapa->cmd_states.gen5;
+
+	/*
+	 * Must read report data through out,
+	 * otherwise Gen5 trackpad cannot response next command
+	 * or report any touch or button data.
+	 */
+	length = get_unaligned_le16(&reg_data[GEN5_RESP_LENGTH_OFFSET]);
+	ret = cyapa_i2c_pip_read(cyapa, gen5_pip->empty_buf, length);
+	if (ret != length)
+		return ret < 0 ? ret : -EIO;
+
+	if (length == GEN5_RESP_LENGTH_SIZE) {
+		/* Previous command has read the data through out. */
+		if (reg_data[GEN5_RESP_REPORT_ID_OFFSET] ==
+				GEN5_BL_RESP_REPORT_ID) {
+			/* Gen5 BL command response data detected */
+			cyapa->gen = CYAPA_GEN5;
+			cyapa->state = CYAPA_STATE_GEN5_BL;
+		} else {
+			/* Gen5 APP command response data detected */
+			cyapa->gen = CYAPA_GEN5;
+			cyapa->state = CYAPA_STATE_GEN5_APP;
+		}
+	} else if ((gen5_pip->empty_buf[GEN5_RESP_REPORT_ID_OFFSET] ==
+				GEN5_BL_RESP_REPORT_ID) &&
+			(gen5_pip->empty_buf[GEN5_RESP_RSVD_OFFSET] ==
+				GEN5_RESP_RSVD_KEY) &&
+			(gen5_pip->empty_buf[GEN5_RESP_BL_SOP_OFFSET] ==
+				GEN5_SOP_KEY) &&
+			(gen5_pip->empty_buf[length - 1] ==
+				GEN5_EOP_KEY)) {
+		/* Gen5 BL command response data detected */
+		cyapa->gen = CYAPA_GEN5;
+		cyapa->state = CYAPA_STATE_GEN5_BL;
+	} else if (gen5_pip->empty_buf[GEN5_RESP_REPORT_ID_OFFSET] ==
+				GEN5_APP_RESP_REPORT_ID &&
+			gen5_pip->empty_buf[GEN5_RESP_RSVD_OFFSET] ==
+				GEN5_RESP_RSVD_KEY) {
+		/* Gen5 APP command response data detected */
+		cyapa->gen = CYAPA_GEN5;
+		cyapa->state = CYAPA_STATE_GEN5_APP;
+	} else {
+		/* Should not happen!!! */
+		cyapa->state = CYAPA_STATE_NO_DEVICE;
+	}
+
+	return 0;
+}
+
+static int cyapa_gen5_state_parse(struct cyapa *cyapa, u8 *reg_data, int len)
+{
+	int length;
+
+	if (!reg_data || len < 3)
+		return -EINVAL;
+
+	cyapa->state = CYAPA_STATE_NO_DEVICE;
+
+	/* Parse based on Gen5 characteristic registers and bits */
+	length = get_unaligned_le16(&reg_data[GEN5_RESP_LENGTH_OFFSET]);
+	if (length == 0 || length == GEN5_RESP_LENGTH_SIZE) {
+		gen5_idle_state_parse(cyapa);
+	} else if (length == GEN5_HID_DESCRIPTOR_SIZE &&
+			(reg_data[2] == GEN5_BL_HID_REPORT_ID ||
+				reg_data[2] == GEN5_APP_HID_REPORT_ID)) {
+		gen5_hid_description_header_parse(cyapa, reg_data);
+	} else if ((length == GEN5_APP_REPORT_DESCRIPTOR_SIZE ||
+			length == GEN5_APP_CONTRACT_REPORT_DESCRIPTOR_SIZE) &&
+			reg_data[2] == GEN5_APP_REPORT_DESCRIPTOR_ID) {
+		/* 0xEE 0x00 0xF6 is Gen5 APP Report Description header. */
+		cyapa->gen = CYAPA_GEN5;
+		cyapa->state = CYAPA_STATE_GEN5_APP;
+	} else if (length == GEN5_BL_REPORT_DESCRIPTOR_SIZE &&
+			reg_data[2] == GEN5_BL_REPORT_DESCRIPTOR_ID) {
+		/* 0x1D 0x00 0xFE is Gen5 BL Report Descriptior header. */
+		cyapa->gen = CYAPA_GEN5;
+		cyapa->state = CYAPA_STATE_GEN5_BL;
+	} else if (reg_data[2] == GEN5_TOUCH_REPORT_ID ||
+			reg_data[2] == GEN5_BTN_REPORT_ID ||
+			reg_data[2] == GEN5_OLD_PUSH_BTN_REPORT_ID ||
+			reg_data[2] == GEN5_PUSH_BTN_REPORT_ID ||
+			reg_data[2] == GEN5_WAKEUP_EVENT_REPORT_ID) {
+		gen5_report_data_header_parse(cyapa, reg_data);
+	} else if (reg_data[2] == GEN5_BL_RESP_REPORT_ID ||
+			reg_data[2] == GEN5_APP_RESP_REPORT_ID) {
+		gen5_cmd_resp_header_parse(cyapa, reg_data);
+	}
+
+	if (cyapa->gen == CYAPA_GEN5) {
+		/*
+		 * Must read the content (e.g.: Report Description and so on)
+		 * from trackpad device through out. Otherwise,
+		 * Gen5 trackpad cannot response to next command or
+		 * report any touch or button data later.
+		 */
+		cyapa_empty_pip_output_data(cyapa, NULL, NULL, NULL);
+
+		if (cyapa->state == CYAPA_STATE_GEN5_APP ||
+			cyapa->state == CYAPA_STATE_GEN5_BL)
+			return 0;
+	}
+
+	return -EAGAIN;
+}
+
+bool cyapa_gen5_sort_bl_exit_data(struct cyapa *cyapa, u8 *buf, int len)
+{
+	if (buf == NULL || len < GEN5_RESP_LENGTH_SIZE)
+		return false;
+
+	if (buf[0] == 0 && buf[1] == 0)
+		return true;
+
+	/* Exit bootloader failed for some reason. */
+	if (len == GEN5_BL_FAIL_EXIT_RESP_LEN &&
+			buf[GEN5_RESP_REPORT_ID_OFFSET] ==
+				GEN5_BL_RESP_REPORT_ID &&
+			buf[GEN5_RESP_RSVD_OFFSET] == GEN5_RESP_RSVD_KEY &&
+			buf[GEN5_RESP_BL_SOP_OFFSET] == GEN5_SOP_KEY &&
+			buf[10] == GEN5_EOP_KEY)
+		return true;
+
+	return false;
+}
+
+static int cyapa_gen5_bl_exit(struct cyapa *cyapa)
+{
+	int error;
+	u8 resp_data[11];
+	int resp_len;
+	u8 bl_gen5_bl_exit[] = { 0x04, 0x00,
+		0x0B, 0x00, 0x40, 0x00, 0x01, 0x3b, 0x00, 0x00,
+		0x20, 0xc7, 0x17
+	};
+
+	resp_len = sizeof(resp_data);
+	error = cyapa_i2c_pip_cmd_irq_sync(cyapa,
+			bl_gen5_bl_exit, sizeof(bl_gen5_bl_exit),
+			resp_data, &resp_len,
+			5000, cyapa_gen5_sort_bl_exit_data, false);
+	if (error)
+		return error;
+
+	if (resp_len == GEN5_BL_FAIL_EXIT_RESP_LEN ||
+			resp_data[GEN5_RESP_REPORT_ID_OFFSET] ==
+				GEN5_BL_RESP_REPORT_ID)
+		return -EAGAIN;
+
+	if (resp_data[0] == 0x00 && resp_data[1] == 0x00)
+		return 0;
+
+	return -ENODEV;
+}
+
+static int cyapa_gen5_change_power_state(struct cyapa *cyapa, u8 power_state)
+{
+	u8 cmd[8] = { 0x04, 0x00, 0x06, 0x00, 0x2f, 0x00, 0x08, 0x01 };
+	u8 resp_data[6];
+	int resp_len;
+	int error;
+
+	cmd[7] = power_state;
+	resp_len = sizeof(resp_data);
+	error = cyapa_i2c_pip_cmd_irq_sync(cyapa, cmd, sizeof(cmd),
+			resp_data, &resp_len,
+			500, cyapa_gen5_sort_tsg_pip_app_resp_data, false);
+	if (error || !VALID_CMD_RESP_HEADER(resp_data, 0x08) ||
+			!GEN5_CMD_COMPLETE_SUCCESS(resp_data[5]))
+		return error < 0 ? error : -EINVAL;
+
+	return 0;
+}
+
+static int cyapa_gen5_set_interval_time(struct cyapa *cyapa,
+		u8 parameter_id, u16 interval_time)
+{
+	u8 cmd[13];
+	int cmd_len;
+	u8 resp_data[7];
+	int resp_len;
+	u8 parameter_size;
+	int error;
+
+	switch (parameter_id) {
+	case GEN5_PARAMETER_ACT_INTERVL_ID:
+		parameter_size = GEN5_PARAMETER_ACT_INTERVL_SIZE;
+		break;
+	case GEN5_PARAMETER_ACT_LFT_INTERVL_ID:
+		parameter_size = GEN5_PARAMETER_ACT_LFT_INTERVL_SIZE;
+		break;
+	case GEN5_PARAMETER_LP_INTRVL_ID:
+		parameter_size = GEN5_PARAMETER_LP_INTRVL_SIZE;
+		break;
+	default:
+		return -EINVAL;
+	}
+	cmd_len = 7 + parameter_size;  /* Not incuding 2 bytes address */
+	cmd[0] = 0x04;
+	cmd[1] = 0x00;
+	put_unaligned_le16(cmd_len, &cmd[2]);
+	cmd[4] = 0x2f;
+	cmd[5] = 0x00;
+	cmd[6] = 0x06; /* Set parameter command code */
+	cmd[7] = parameter_id;
+	cmd[8] = parameter_size;
+	put_unaligned_le16(interval_time, &cmd[9]);
+	resp_len = sizeof(resp_data);
+	error = cyapa_i2c_pip_cmd_irq_sync(cyapa, cmd, cmd_len + 2,
+			resp_data, &resp_len,
+			500, cyapa_gen5_sort_tsg_pip_app_resp_data, false);
+	if (error || !VALID_CMD_RESP_HEADER(resp_data, 0x06) ||
+			resp_data[5] != parameter_id ||
+			resp_data[6] != parameter_size)
+		return error < 0 ? error : -EINVAL;
+
+	return 0;
+}
+
+static int cyapa_gen5_get_interval_time(struct cyapa *cyapa,
+		u8 parameter_id, u16 *interval_time)
+{
+	u8 cmd[8];
+	u8 resp_data[11];
+	int resp_len;
+	u8 parameter_size;
+	u16 mask, i;
+	int error;
+
+	*interval_time = 0;
+	switch (parameter_id) {
+	case GEN5_PARAMETER_ACT_INTERVL_ID:
+		parameter_size = GEN5_PARAMETER_ACT_INTERVL_SIZE;
+		break;
+	case GEN5_PARAMETER_ACT_LFT_INTERVL_ID:
+		parameter_size = GEN5_PARAMETER_ACT_LFT_INTERVL_SIZE;
+		break;
+	case GEN5_PARAMETER_LP_INTRVL_ID:
+		parameter_size = GEN5_PARAMETER_LP_INTRVL_SIZE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	cmd[0] = 0x04;
+	cmd[1] = 0x00;
+	cmd[2] = 0x06;
+	cmd[3] = 0x00;
+	cmd[4] = 0x2f;
+	cmd[5] = 0x00;
+	cmd[6] = 0x05; /* Get parameter command code */
+	cmd[7] = parameter_id;
+	resp_len = sizeof(resp_data);
+	error = cyapa_i2c_pip_cmd_irq_sync(cyapa, cmd, sizeof(cmd),
+			resp_data, &resp_len,
+			500, cyapa_gen5_sort_tsg_pip_app_resp_data, false);
+	if (error || !VALID_CMD_RESP_HEADER(resp_data, 0x05) ||
+			resp_data[5] != parameter_id ||
+			resp_data[6] == 0)
+		return error < 0 ? error : -EINVAL;
+
+	mask = 0;
+	for (i = 0; i < parameter_size; i++)
+		mask |= (0xff << (i * 8));
+	*interval_time = get_unaligned_le16(&resp_data[7]) & mask;
+
+	return 0;
+}
+
+static int cyapa_gen5_disable_pip_report(struct cyapa *cyapa)
+{
+	u8 cmd[10];
+	u8 resp_data[7];
+	int resp_len;
+	int error;
+
+	cmd[0] = 0x04;
+	cmd[1] = 0x00;
+	put_unaligned_le16(8, &cmd[2]);
+	cmd[4] = 0x2f;
+	cmd[5] = 0x00;
+	cmd[6] = 0x06; /* Set parameter command code */
+	cmd[7] = GEN5_PARAMETER_DISABLE_PIP_REPORT;
+	cmd[8] = 0x01;
+	cmd[9] = 0x01;
+	resp_len = sizeof(resp_data);
+	error = cyapa_i2c_pip_cmd_irq_sync(cyapa, cmd, 10,
+			resp_data, &resp_len,
+			500, cyapa_gen5_sort_tsg_pip_app_resp_data, false);
+	if (error || !VALID_CMD_RESP_HEADER(resp_data, 0x06) ||
+			resp_data[5] != GEN5_PARAMETER_DISABLE_PIP_REPORT ||
+			resp_data[6] != 0x01)
+		return error < 0 ? error : -EINVAL;
+
+	return 0;
+}
+
+static int cyapa_gen5_deep_sleep(struct cyapa *cyapa, u8 state)
+{
+	u8 cmd[4] = { 0x05, 0x00, 0x00, 0x08};
+	u8 resp_data[5];
+	int resp_len;
+	int error;
+
+	cmd[0] = 0x05;
+	cmd[1] = 0x00;
+	cmd[2] = state & GEN5_DEEP_SLEEP_STATE_MASK;
+	cmd[3] = 0x08;
+	resp_len = sizeof(resp_data);
+	error = cyapa_i2c_pip_cmd_irq_sync(cyapa, cmd, sizeof(cmd),
+			resp_data, &resp_len,
+			500, cyapa_gen5_sort_deep_sleep_data, false);
+	if (error || ((resp_data[3] & GEN5_DEEP_SLEEP_STATE_MASK) != state))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int cyapa_gen5_set_power_mode(struct cyapa *cyapa,
+		u8 power_mode, u16 sleep_time)
+{
+	struct device *dev = &cyapa->client->dev;
+	u8 power_state;
+	int error;
+
+	if (cyapa->state != CYAPA_STATE_GEN5_APP)
+		return 0;
+
+	/* Dump all the report data before do power mode commmands. */
+	cyapa_empty_pip_output_data(cyapa, NULL, NULL, NULL);
+
+	if (GEN5_DEV_GET_PWR_STATE(cyapa) == UNINIT_PWR_MODE) {
+		/*
+		 * Assume TP in deep sleep mode when driver is loaded,
+		 * avoid driver unload and reload command IO issue caused by TP
+		 * has been set into deep sleep mode when unloading.
+		 */
+		GEN5_DEV_SET_PWR_STATE(cyapa, PWR_MODE_OFF);
+	}
+
+	if (GEN5_DEV_UNINIT_SLEEP_TIME(cyapa) &&
+			GEN5_DEV_GET_PWR_STATE(cyapa) != PWR_MODE_OFF)
+		if (cyapa_gen5_get_interval_time(cyapa,
+				GEN5_PARAMETER_LP_INTRVL_ID,
+				&cyapa->dev_sleep_time) != 0)
+			GEN5_DEV_SET_SLEEP_TIME(cyapa, UNINIT_SLEEP_TIME);
+
+	if (GEN5_DEV_GET_PWR_STATE(cyapa) == power_mode) {
+		if (power_mode == PWR_MODE_OFF ||
+			power_mode == PWR_MODE_FULL_ACTIVE ||
+			power_mode == PWR_MODE_BTN_ONLY ||
+			GEN5_DEV_GET_SLEEP_TIME(cyapa) == sleep_time) {
+			/* Has in correct power mode state, early return. */
+			return 0;
+		}
+	}
+
+	if (power_mode == PWR_MODE_OFF) {
+		error = cyapa_gen5_deep_sleep(cyapa, GEN5_DEEP_SLEEP_STATE_OFF);
+		if (error) {
+			dev_err(dev, "enter deep sleep fail: %d\n", error);
+			return error;
+		}
+
+		GEN5_DEV_SET_PWR_STATE(cyapa, PWR_MODE_OFF);
+		return 0;
+	}
+
+	/*
+	 * When trackpad in power off mode, it cannot change to other power
+	 * state directly, must be wake up from sleep firstly, then
+	 * continue to do next power sate change.
+	 */
+	if (GEN5_DEV_GET_PWR_STATE(cyapa) == PWR_MODE_OFF) {
+		error = cyapa_gen5_deep_sleep(cyapa, GEN5_DEEP_SLEEP_STATE_ON);
+		if (error) {
+			dev_err(dev, "deep sleep wake fail: %d\n", error);
+			return error;
+		}
+	}
+
+	if (power_mode == PWR_MODE_FULL_ACTIVE) {
+		error = cyapa_gen5_change_power_state(cyapa,
+				GEN5_POWER_STATE_ACTIVE);
+		if (error) {
+			dev_err(dev, "change to active fail: %d\n", error);
+			return error;
+		}
+
+		GEN5_DEV_SET_PWR_STATE(cyapa, PWR_MODE_FULL_ACTIVE);
+	} else if (power_mode == PWR_MODE_BTN_ONLY) {
+		error = cyapa_gen5_change_power_state(cyapa,
+				GEN5_POWER_STATE_BTN_ONLY);
+		if (error) {
+			dev_err(dev, "fail to button only mode: %d\n", error);
+			return error;
+		}
+
+		GEN5_DEV_SET_PWR_STATE(cyapa, PWR_MODE_BTN_ONLY);
+	} else {
+		/*
+		 * Continue to change power mode even failed to set
+		 * interval time, it won't affect the power mode change.
+		 * except the sleep interval time is not correct.
+		 */
+		if (GEN5_DEV_UNINIT_SLEEP_TIME(cyapa) ||
+				sleep_time != GEN5_DEV_GET_SLEEP_TIME(cyapa))
+			if (cyapa_gen5_set_interval_time(cyapa,
+					GEN5_PARAMETER_LP_INTRVL_ID,
+					sleep_time) == 0)
+				GEN5_DEV_SET_SLEEP_TIME(cyapa, sleep_time);
+
+		if (sleep_time <= GEN5_POWER_READY_MAX_INTRVL_TIME)
+			power_state = GEN5_POWER_STATE_READY;
+		else
+			power_state = GEN5_POWER_STATE_IDLE;
+		error = cyapa_gen5_change_power_state(cyapa, power_state);
+		if (error) {
+			dev_err(dev, "set power state to 0x%02x failed: %d\n",
+				power_state, error);
+			return error;
+		}
+
+		/*
+		 * Disable pip report for a little time, firmware will
+		 * re-enable it automatically. It's used to fix the issue
+		 * that trackpad unable to report signal to wake system up
+		 * in the special situation that system is in suspending, and
+		 * at the same time, user touch trackpad to wake system up.
+		 * This function can avoid the data to be buffured when system
+		 * is suspending which may cause interrput line unable to be
+		 * asserted again.
+		 */
+		cyapa_empty_pip_output_data(cyapa, NULL, NULL, NULL);
+		cyapa_gen5_disable_pip_report(cyapa);
+
+		GEN5_DEV_SET_PWR_STATE(cyapa,
+			cyapa_sleep_time_to_pwr_cmd(sleep_time));
+	}
+
+	return 0;
+}
+
+static bool cyapa_gen5_sort_system_info_data(struct cyapa *cyapa,
+		u8 *buf, int len)
+{
+	/* Check the report id and command code */
+	if (VALID_CMD_RESP_HEADER(buf, 0x02))
+		return true;
+
+	return false;
+}
+
+static int cyapa_gen5_bl_query_data(struct cyapa *cyapa)
+{
+	u8 cmd[16];
+	int cmd_len;
+	u8 resp_data[GEN5_BL_READ_APP_INFO_RESP_LEN];
+	int resp_len;
+	int error;
+
+	/* Read application information. */
+	cmd[0] = 0x04;
+	cmd[1] = 0x00;
+	cmd[2] = 0x0b;
+	cmd[3] = 0x00;
+	cmd[4] = 0x40;
+	cmd[5] = 0x00;
+	cmd[6] = GEN5_SOP_KEY;
+	cmd[7] = 0x3c;  /* Read application information command code */
+	cmd[8] = 0x00;
+	cmd[9] = 0x00;
+	cmd[10] = 0xb0;
+	cmd[11] = 0x42;
+	cmd[12] = GEN5_EOP_KEY;
+	cmd_len = 13;
+	resp_len = GEN5_BL_READ_APP_INFO_RESP_LEN;
+	error = cyapa_i2c_pip_cmd_irq_sync(cyapa,
+			cmd, cmd_len,
+			resp_data, &resp_len,
+			500, cyapa_gen5_sort_tsg_pip_bl_resp_data, false);
+	if (error || resp_len != GEN5_BL_READ_APP_INFO_RESP_LEN ||
+		!GEN5_CMD_COMPLETE_SUCCESS(resp_data[5]))
+		return error ? error : -EIO;
+
+	memcpy(&cyapa->product_id[0], &resp_data[8], 5);
+	cyapa->product_id[5] = '-';
+	memcpy(&cyapa->product_id[6], &resp_data[13], 6);
+	cyapa->product_id[12] = '-';
+	memcpy(&cyapa->product_id[13], &resp_data[19], 2);
+	cyapa->product_id[15] = '\0';
+
+	cyapa->fw_maj_ver = resp_data[22];
+	cyapa->fw_min_ver = resp_data[23];
+
+	return 0;
+}
+
+static int cyapa_gen5_get_query_data(struct cyapa *cyapa)
+{
+	u8 resp_data[71];
+	int resp_len;
+	u8 get_system_information[] = {
+		0x04, 0x00, 0x05, 0x00, 0x2f, 0x00, 0x02
+	};
+	u16 product_family;
+	int error;
+
+	resp_len = sizeof(resp_data);
+	error = cyapa_i2c_pip_cmd_irq_sync(cyapa,
+			get_system_information, sizeof(get_system_information),
+			resp_data, &resp_len,
+			2000, cyapa_gen5_sort_system_info_data, false);
+	if (error || resp_len < sizeof(resp_data))
+		return error ? error : -EIO;
+
+	product_family = get_unaligned_le16(&resp_data[7]);
+	if ((product_family & GEN5_PRODUCT_FAMILY_MASK) !=
+		GEN5_PRODUCT_FAMILY_TRACKPAD)
+		return -EINVAL;
+
+	cyapa->fw_maj_ver = resp_data[15];
+	cyapa->fw_min_ver = resp_data[16];
+
+	cyapa->electrodes_x = resp_data[52];
+	cyapa->electrodes_y = resp_data[53];
+
+	cyapa->physical_size_x =  get_unaligned_le16(&resp_data[54]) / 100;
+	cyapa->physical_size_y = get_unaligned_le16(&resp_data[56]) / 100;
+
+	cyapa->max_abs_x = get_unaligned_le16(&resp_data[58]);
+	cyapa->max_abs_y = get_unaligned_le16(&resp_data[60]);
+
+	cyapa->max_z = get_unaligned_le16(&resp_data[62]);
+
+	cyapa->x_origin = resp_data[64] & 0x01;
+	cyapa->y_origin = resp_data[65] & 0x01;
+
+	cyapa->btn_capability = (resp_data[70] << 3) & CAPABILITY_BTN_MASK;
+
+	memcpy(&cyapa->product_id[0], &resp_data[33], 5);
+	cyapa->product_id[5] = '-';
+	memcpy(&cyapa->product_id[6], &resp_data[38], 6);
+	cyapa->product_id[12] = '-';
+	memcpy(&cyapa->product_id[13], &resp_data[44], 2);
+	cyapa->product_id[15] = '\0';
+
+	if (!cyapa->electrodes_x || !cyapa->electrodes_y ||
+		!cyapa->physical_size_x || !cyapa->physical_size_y ||
+		!cyapa->max_abs_x || !cyapa->max_abs_y || !cyapa->max_z)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int cyapa_gen5_do_operational_check(struct cyapa *cyapa)
+{
+	struct device *dev = &cyapa->client->dev;
+	int error;
+
+	if (cyapa->gen != CYAPA_GEN5)
+		return -ENODEV;
+
+	switch (cyapa->state) {
+	case CYAPA_STATE_GEN5_BL:
+		error = cyapa_gen5_bl_exit(cyapa);
+		if (error) {
+			/* Rry to update trackpad product information. */
+			cyapa_gen5_bl_query_data(cyapa);
+			goto out;
+		}
+
+		cyapa->state = CYAPA_STATE_GEN5_APP;
+
+	case CYAPA_STATE_GEN5_APP:
+		/*
+		 * If trackpad device in deep sleep mode,
+		 * the app command will fail.
+		 * So always try to reset trackpad device to full active when
+		 * the device state is requeried.
+		 */
+		error = cyapa_gen5_set_power_mode(cyapa,
+				PWR_MODE_FULL_ACTIVE, 0);
+		if (error)
+			dev_warn(dev, "%s: failed to set power active mode.\n",
+				__func__);
+
+		/* Get trackpad product information. */
+		error = cyapa_gen5_get_query_data(cyapa);
+		if (error)
+			goto out;
+		/* Only support product ID starting with CYTRA */
+		if (memcmp(cyapa->product_id, unique_str,
+				strlen(unique_str)) != 0) {
+			dev_err(dev, "%s: unknown product ID (%s)\n",
+				__func__, cyapa->product_id);
+			error = -EINVAL;
+		}
+		break;
+	default:
+		error = -EINVAL;
+	}
+
+out:
+	return error;
+}
+
+/*
+ * Return false, do not continue process
+ * Return true, continue process.
+ */
+static bool cyapa_gen5_irq_cmd_handler(struct cyapa *cyapa)
+{
+	int length;
+	struct cyapa_gen5_cmd_states *gen5_pip = &cyapa->cmd_states.gen5;
+
+	if (atomic_read(&gen5_pip->cmd_issued)) {
+		/* Polling command response data. */
+		if (gen5_pip->is_irq_mode == false)
+			return false;
+
+		/*
+		 * Read out all none command response data.
+		 * these output data may caused by user put finger on
+		 * trackpad when host waiting the command response.
+		 */
+		cyapa_i2c_pip_read(cyapa, gen5_pip->irq_cmd_buf,
+			GEN5_RESP_LENGTH_SIZE);
+		length = get_unaligned_le16(gen5_pip->irq_cmd_buf);
+		length = (length <= GEN5_RESP_LENGTH_SIZE) ?
+				GEN5_RESP_LENGTH_SIZE : length;
+		if (length > GEN5_RESP_LENGTH_SIZE)
+			cyapa_i2c_pip_read(cyapa,
+				gen5_pip->irq_cmd_buf, length);
+
+		if (!(gen5_pip->resp_sort_func &&
+			gen5_pip->resp_sort_func(cyapa,
+				gen5_pip->irq_cmd_buf, length))) {
+			/*
+			 * Cover the Gen5 V1 firmware issue.
+			 * The issue is there is no interrut will be
+			 * asserted to notityf host to read a command
+			 * data out when always has finger touch on
+			 * trackpad during the command is issued to
+			 * trackad device.
+			 * This issue has the scenario is that,
+			 * user always has his fingers touched on
+			 * trackpad device when booting/rebooting
+			 * their chrome book.
+			 */
+			length = *gen5_pip->resp_len;
+			cyapa_empty_pip_output_data(cyapa,
+					gen5_pip->resp_data,
+					&length,
+					gen5_pip->resp_sort_func);
+			if (gen5_pip->resp_len && length != 0) {
+				*gen5_pip->resp_len = length;
+				atomic_dec(&gen5_pip->cmd_issued);
+				complete(&gen5_pip->cmd_ready);
+			}
+			return false;
+		}
+
+		if (gen5_pip->resp_data && gen5_pip->resp_len) {
+			*gen5_pip->resp_len = (*gen5_pip->resp_len < length) ?
+				*gen5_pip->resp_len : length;
+			memcpy(gen5_pip->resp_data, gen5_pip->irq_cmd_buf,
+				*gen5_pip->resp_len);
+		}
+		atomic_dec(&gen5_pip->cmd_issued);
+		complete(&gen5_pip->cmd_ready);
+		return false;
+	}
+
+	return true;
+}
+
+static void cyapa_gen5_report_buttons(struct cyapa *cyapa,
+		const struct cyapa_gen5_report_data *report_data)
+{
+	struct input_dev *input = cyapa->input;
+	u8 buttons = report_data->report_head[GEN5_BUTTONS_OFFSET];
+
+	buttons = (buttons << CAPABILITY_BTN_SHIFT) & CAPABILITY_BTN_MASK;
+
+	if (cyapa->btn_capability & CAPABILITY_LEFT_BTN_MASK) {
+		input_report_key(input, BTN_LEFT,
+			!!(buttons & CAPABILITY_LEFT_BTN_MASK));
+	}
+	if (cyapa->btn_capability & CAPABILITY_MIDDLE_BTN_MASK) {
+		input_report_key(input, BTN_MIDDLE,
+			!!(buttons & CAPABILITY_MIDDLE_BTN_MASK));
+	}
+	if (cyapa->btn_capability & CAPABILITY_RIGHT_BTN_MASK) {
+		input_report_key(input, BTN_RIGHT,
+			!!(buttons & CAPABILITY_RIGHT_BTN_MASK));
+	}
+
+	input_sync(input);
+}
+
+static void cyapa_gen5_report_slot_data(struct cyapa *cyapa,
+		const struct cyapa_gen5_touch_record *touch)
+{
+	struct input_dev *input = cyapa->input;
+	u8 event_id = GEN5_GET_EVENT_ID(touch->touch_tip_event_id);
+	int slot = GEN5_GET_TOUCH_ID(touch->touch_tip_event_id);
+	int x, y;
+
+	if (event_id == RECORD_EVENT_LIFTOFF)
+		return;
+
+	input_mt_slot(input, slot);
+	input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+	x = (touch->x_hi << 8) | touch->x_lo;
+	if (cyapa->x_origin)
+		x = cyapa->max_abs_x - x;
+	input_report_abs(input, ABS_MT_POSITION_X, x);
+	y = (touch->y_hi << 8) | touch->y_lo;
+	if (cyapa->y_origin)
+		y = cyapa->max_abs_y - y;
+	input_report_abs(input, ABS_MT_POSITION_Y, y);
+	input_report_abs(input, ABS_MT_PRESSURE,
+		touch->z);
+	input_report_abs(input, ABS_MT_TOUCH_MAJOR,
+		touch->major_axis_len);
+	input_report_abs(input, ABS_MT_TOUCH_MINOR,
+		touch->minor_axis_len);
+
+	input_report_abs(input, ABS_MT_WIDTH_MAJOR,
+		touch->major_tool_len);
+	input_report_abs(input, ABS_MT_WIDTH_MINOR,
+		touch->minor_tool_len);
+
+	input_report_abs(input, ABS_MT_ORIENTATION,
+		touch->orientation);
+}
+
+static void cyapa_gen5_report_touches(struct cyapa *cyapa,
+		const struct cyapa_gen5_report_data *report_data)
+{
+	struct input_dev *input = cyapa->input;
+	unsigned int touch_num;
+	int i;
+
+	touch_num = report_data->report_head[GEN5_NUMBER_OF_TOUCH_OFFSET] &
+			GEN5_NUMBER_OF_TOUCH_MASK;
+
+	for (i = 0; i < touch_num; i++)
+		cyapa_gen5_report_slot_data(cyapa,
+			&report_data->touch_records[i]);
+
+	input_mt_sync_frame(input);
+	input_sync(input);
+}
+
+static int cyapa_gen5_irq_handler(struct cyapa *cyapa)
+{
+	struct device *dev = &cyapa->client->dev;
+	struct cyapa_gen5_report_data report_data;
+	int ret;
+	u8 report_id;
+	unsigned int report_len;
+
+	if (cyapa->gen != CYAPA_GEN5 ||
+		cyapa->state != CYAPA_STATE_GEN5_APP) {
+		dev_err(dev, "invalid device state, gen=%d, state=0x%02x\n",
+			cyapa->gen, cyapa->state);
+		return -EINVAL;
+	}
+
+	ret = cyapa_i2c_pip_read(cyapa, (u8 *)&report_data,
+			GEN5_RESP_LENGTH_SIZE);
+	if (ret != GEN5_RESP_LENGTH_SIZE) {
+		dev_err(dev, "failed to read length bytes, (%d)\n", ret);
+		return -EINVAL;
+	}
+
+	report_len = get_unaligned_le16(
+			&report_data.report_head[GEN5_RESP_LENGTH_OFFSET]);
+	if (report_len < GEN5_RESP_LENGTH_SIZE) {
+		/* Invliad length or internal reset happened. */
+		dev_err(dev, "invalid report_len=%d. bytes: %02x %02x\n",
+			report_len, report_data.report_head[0],
+			report_data.report_head[1]);
+		return -EINVAL;
+	}
+
+	/* Idle, no data for report. */
+	if (report_len == GEN5_RESP_LENGTH_SIZE)
+		return 0;
+
+	ret = cyapa_i2c_pip_read(cyapa, (u8 *)&report_data, report_len);
+	if (ret != report_len) {
+		dev_err(dev, "failed to read %d bytes report data, (%d)\n",
+			report_len, ret);
+		return -EINVAL;
+	}
+
+	report_id = report_data.report_head[GEN5_RESP_REPORT_ID_OFFSET];
+	if (report_id == GEN5_WAKEUP_EVENT_REPORT_ID &&
+			report_len == GEN5_WAKEUP_EVENT_SIZE) {
+		/*
+		 * Device wake event from deep sleep mode for touch.
+		 * This interrupt event is used to wake system up.
+		 */
+		return 0;
+	} else if (report_id != GEN5_TOUCH_REPORT_ID &&
+			report_id != GEN5_BTN_REPORT_ID &&
+			report_id != GEN5_OLD_PUSH_BTN_REPORT_ID &&
+			report_id != GEN5_PUSH_BTN_REPORT_ID) {
+		/* Running in BL mode or unknown response data read. */
+		dev_err(dev, "invalid report_id=0x%02x\n", report_id);
+		return -EINVAL;
+	}
+
+	if (report_id == GEN5_TOUCH_REPORT_ID &&
+		(report_len < GEN5_TOUCH_REPORT_HEAD_SIZE ||
+			report_len > GEN5_TOUCH_REPORT_MAX_SIZE)) {
+		/* Invalid report data length for finger packet. */
+		dev_err(dev, "invalid touch packet length=%d\n", report_len);
+		return 0;
+	}
+
+	if ((report_id == GEN5_BTN_REPORT_ID ||
+			report_id == GEN5_OLD_PUSH_BTN_REPORT_ID ||
+			report_id == GEN5_PUSH_BTN_REPORT_ID) &&
+		(report_len < GEN5_BTN_REPORT_HEAD_SIZE ||
+			report_len > GEN5_BTN_REPORT_MAX_SIZE)) {
+		/* Invalid report data length of button packet. */
+		dev_err(dev, "invalid button packet length=%d\n", report_len);
+		return 0;
+	}
+
+	if (report_id == GEN5_TOUCH_REPORT_ID)
+		cyapa_gen5_report_touches(cyapa, &report_data);
+	else
+		cyapa_gen5_report_buttons(cyapa, &report_data);
+
+	return 0;
+}
+
+const struct cyapa_dev_ops cyapa_gen5_ops = {
+	.initialize = cyapa_gen5_initialize,
+
+	.state_parse = cyapa_gen5_state_parse,
+	.operational_check = cyapa_gen5_do_operational_check,
+
+	.irq_handler = cyapa_gen5_irq_handler,
+	.irq_cmd_handler = cyapa_gen5_irq_cmd_handler,
+	.sort_empty_output_data = cyapa_empty_pip_output_data,
+	.set_power_mode = cyapa_gen5_set_power_mode,
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists