| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 12 Dec 2014 09:25:02 +0000
From: Andrew Jackson <andrew.jackson@....com>
To: Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.de>
Cc: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Rajeev Kumar <rajeevkumar.linux@...il.com>,
Andrew Jackson <Andrew.Jackson@....com>,
Liviu Dudau <Liviu.Dudau@....com>,
Lars-Peter Clausen <lars@...afoo.de>,
Arnd Bergmann <arnd@...db.de>,
linux-arm-kernel@...ts.infradead.org, alsa-devel@...a-project.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 3/6] ASoC: dwc: Iterate over all channels
From: Andrew Jackson <Andrew.Jackson@....com>
The Designware core can be configured with up to four stereo channels.
Each stereo channel is individually configured so, when the driver's
hw_params call is made, each requested stereo channel has to be
programmed.
Signed-off-by: Andrew Jackson <Andrew.Jackson@....com>
---
sound/soc/dwc/designware_i2s.c | 39 ++++++++++++++++++---------------------
1 files changed, 18 insertions(+), 21 deletions(-)
diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
index b9d6a25..1d26ded 100644
--- a/sound/soc/dwc/designware_i2s.c
+++ b/sound/soc/dwc/designware_i2s.c
@@ -209,16 +209,9 @@ static int dw_i2s_hw_params(struct snd_pcm_substream *substream,
switch (config->chan_nr) {
case EIGHT_CHANNEL_SUPPORT:
- ch_reg = 3;
- break;
case SIX_CHANNEL_SUPPORT:
- ch_reg = 2;
- break;
case FOUR_CHANNEL_SUPPORT:
- ch_reg = 1;
- break;
case TWO_CHANNEL_SUPPORT:
- ch_reg = 0;
break;
default:
dev_err(dev->dev, "channel not supported\n");
@@ -227,20 +220,24 @@ static int dw_i2s_hw_params(struct snd_pcm_substream *substream,
i2s_disable_channels(dev, substream->stream);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- i2s_write_reg(dev->i2s_base, TXFFR, 1);
- i2s_write_reg(dev->i2s_base, TCR(ch_reg), xfer_resolution);
- i2s_write_reg(dev->i2s_base, TFCR(ch_reg), 0x02);
- irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
- i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x30);
- i2s_write_reg(dev->i2s_base, TER(ch_reg), 1);
- } else {
- i2s_write_reg(dev->i2s_base, RXFFR, 1);
- i2s_write_reg(dev->i2s_base, RCR(ch_reg), xfer_resolution);
- i2s_write_reg(dev->i2s_base, RFCR(ch_reg), 0x07);
- irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
- i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x03);
- i2s_write_reg(dev->i2s_base, RER(ch_reg), 1);
+ for (ch_reg = 0; ch_reg < (config->chan_nr / 2); ch_reg++) {
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ i2s_write_reg(dev->i2s_base, TXFFR, 1);
+ i2s_write_reg(dev->i2s_base, TCR(ch_reg),
+ xfer_resolution);
+ i2s_write_reg(dev->i2s_base, TFCR(ch_reg), 0x02);
+ irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
+ i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x30);
+ i2s_write_reg(dev->i2s_base, TER(ch_reg), 1);
+ } else {
+ i2s_write_reg(dev->i2s_base, RXFFR, 1);
+ i2s_write_reg(dev->i2s_base, RCR(ch_reg),
+ xfer_resolution);
+ i2s_write_reg(dev->i2s_base, RFCR(ch_reg), 0x07);
+ irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
+ i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x03);
+ i2s_write_reg(dev->i2s_base, RER(ch_reg), 1);
+ }
}
i2s_write_reg(dev->i2s_base, CCR, ccr);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists