[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1418594998-2361-1-git-send-email-stefan@agner.ch>
Date: Sun, 14 Dec 2014 23:09:55 +0100
From: Stefan Agner <stefan@...er.ch>
To: tglx@...utronix.de, jason@...edaemon.net, marc.zyngier@....com
Cc: u.kleine-koenig@...gutronix.de, shawn.guo@...aro.org,
kernel@...gutronix.de, arnd@...db.de, robh+dt@...nel.org,
pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
linux@....linux.org.uk, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
stefan@...er.ch
Subject: [PATCH v2 0/3] irqchip: vf610-mscm: add support for MSCM interrupt router
Splitted out version of the MSCM driver. My first driver based on the
routeable domain support and was part of the Vybrid Cortex-M4 support
patchset.
So far the MSCM interrupt router was initialized by the boot loader
and configured all interrupts for the Cortex-A5 CPU. There are two
use cases where a proper driver is necessary:
- To run Linux on the Cortex-M4. When the kernel is running on the
non-preconfigured CPU, the interrupt router need to be configured
properly.
- To support deeper sleep modes: LPSTOP clears the interrupt router
configuration, hence a driver needs to restore the configuration
on resume.
I created a seperate patchset for that driver which hopefully makes
it easier to get it into mergeable state.
The patchset is based on the master branch of Linus with the branch
irq-irqdomain-arm-for-linus from tip merged. I guess this will apply
flawless on 3.19-rc1 once it's out.
Changes since v1 (part of Vybrid Cortex-M4 support)
- Rewrite with irqdomain hierarchy
- Implemented as proper irqchip and move to driver/irqchip/
- Doesn't work on Cortex-M4 anymore (NVIC as parent is not yet
implemented)
Stefan Agner (3):
irqchip: vf610-mscm: add support for MSCM interrupt router
irqchip: vf610-mscm: dt-bindings: add MSCM bindings
ARM: dts: vf610: add Miscellaneous System Control Module (MSCM)
Stefan Agner (3):
irqchip: vf610-mscm: add support for MSCM interrupt router
irqchip: vf610-mscm: dt-bindings: add MSCM bindings
ARM: dts: vf610: add Miscellaneous System Control Module (MSCM)
.../bindings/arm/freescale/fsl,vf610-mscm.txt | 21 +++
arch/arm/boot/dts/vf500.dtsi | 9 +-
arch/arm/boot/dts/vfxxx.dtsi | 7 +
arch/arm/mach-imx/Kconfig | 1 +
drivers/irqchip/Kconfig | 11 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-vf610-mscm.c | 198 +++++++++++++++++++++
7 files changed, 246 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm.txt
create mode 100644 drivers/irqchip/irq-vf610-mscm.c
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists