early console in setup code [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.18.0-g5fbea33 (kbuild@lkp-ib04) (gcc version 4.9.1 (Debian 4.9.1-19) ) #102 SMP Fri Dec 12 10:53:23 CST 2014 [ 0.000000] Command line: user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-2/rand_boot-1-yocto-minimal-x86_64.cgz-x86_64-randconfig-ib0-12112357-5fbea33740aeb948422d7b7e8aafbeac362264b2-1.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-randconfig-ib0-12112357/5fbea33740aeb948422d7b7e8aafbeac362264b2/vmlinuz-3.18.0-g5fbea33 kconfig=x86_64-randconfig-ib0-12112357 commit=5fbea33740aeb948422d7b7e8aafbeac362264b2 branch=net/master root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/vm-kbuild-yocto-x86_64/boot/1/yocto-minimal-x86_64.cgz/x86_64-randconfig-ib0-12112357/5fbea33740aeb948422d7b7e8aafbeac362264b2/0 ip=::::vm-kbuild-yocto-x86_64-2::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC UC UC UC UC [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdaf0-0x000fdaff] mapped at [ffff8800000fdaf0] [ 0.000000] mpc: fdb00-fdbe8 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x04101000, 0x04101fff] PGTABLE [ 0.000000] BRK [0x04102000, 0x04102fff] PGTABLE [ 0.000000] BRK [0x04103000, 0x04103fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13a00000-0x13bfffff] [ 0.000000] [mem 0x13a00000-0x13bfffff] page 4k [ 0.000000] BRK [0x04104000, 0x04104fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x10000000-0x139fffff] [ 0.000000] [mem 0x10000000-0x139fffff] page 4k [ 0.000000] BRK [0x04105000, 0x04105fff] PGTABLE [ 0.000000] BRK [0x04106000, 0x04106fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x0fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x13c00000-0x13ffdfff] [ 0.000000] [mem 0x13c00000-0x13ffdfff] page 4k [ 0.000000] RAMDISK: [mem 0x13c33000-0x13feffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FD990 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x0000000013FFE4B0 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x0000000013FFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x0000000013FFE4F0 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0x0000000013FFFF40 000040 [ 0.000000] ACPI: SSDT 0x0000000013FFF800 000735 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x0000000013FFF6E0 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x0000000013FFF6A0 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff7fc000 ( fee00000) [ 0.000000] cma: dma_contiguous_reserve(limit 13ffe000) [ 0.000000] cma: dma_contiguous_reserve: reserving 31 MiB for global area [ 0.000000] cma: cma_declare_contiguous(size 0x0000000001ff6000, base 0x0000000000000000, limit 0x0000000013ffe000 alignment 0x0000000000000000) [ 0.000000] cma: Reserved 32 MiB at 0x0000000011800000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13ffc001, primary cpu clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1216 pages used for memmap [ 0.000000] DMA32 zone: 77822 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff7fc000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff7fb000 (fec00000) [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880013800000 s83072 r0 d31616 u2097152 [ 0.000000] pcpu-alloc: s83072 r0 d31616 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1380d300 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 80519 [ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-2/rand_boot-1-yocto-minimal-x86_64.cgz-x86_64-randconfig-ib0-12112357-5fbea33740aeb948422d7b7e8aafbeac362264b2-1.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-randconfig-ib0-12112357/5fbea33740aeb948422d7b7e8aafbeac362264b2/vmlinuz-3.18.0-g5fbea33 kconfig=x86_64-randconfig-ib0-12112357 commit=5fbea33740aeb948422d7b7e8aafbeac362264b2 branch=net/master root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/vm-kbuild-yocto-x86_64/boot/1/yocto-minimal-x86_64.cgz/x86_64-randconfig-ib0-12112357/5fbea33740aeb948422d7b7e8aafbeac362264b2/0 ip=::::vm-kbuild-yocto-x86_64-2::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Memory: 232124K/327280K available (17454K kernel code, 8779K rwdata, 9456K rodata, 1664K init, 11028K bss, 95156K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:4352 nr_irqs:256 0 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] memory used by lock dependency info: 8127 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] ------------------------ [ 0.000000] | Locking API testsuite: [ 0.000000] ---------------------------------------------------------------------------- [ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] A-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.000000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] recursive read-lock: | ok | |failed| [ 0.000000] recursive read-lock #2: | ok | |failed| [ 0.000000] mixed read-write-lock: |failed| |failed| [ 0.000000] mixed write-read-lock: |failed| |failed| [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] hard-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.000000] soft-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.000000] hard-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.000000] soft-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.000000] sirq-safe-A => hirqs-on/12:failed|failed| ok | [ 0.000000] sirq-safe-A => hirqs-on/21:failed|failed| ok | [ 0.000000] hard-safe-A + irqs-on/12:failed|failed| ok | [ 0.000000] soft-safe-A + irqs-on/12:failed|failed| ok | [ 0.000000] hard-safe-A + irqs-on/21:failed|failed| ok | [ 0.000000] soft-safe-A + irqs-on/21:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/123:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/123:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/132:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/132:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/213:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/213:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/231:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/231:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/312:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/312:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/321:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/321:failed|failed| ok | [ 0.000000] hard-irq read-recursion/123: ok | [ 0.000000] soft-irq read-recursion/123: ok | [ 0.000000] hard-irq read-recursion/132: ok | [ 0.000000] soft-irq read-recursion/132: ok | [ 0.000000] hard-irq read-recursion/213: ok | [ 0.000000] soft-irq read-recursion/213: ok | [ 0.000000] hard-irq read-recursion/231: ok | [ 0.000000] soft-irq read-recursion/231: ok | [ 0.000000] hard-irq read-recursion/312: ok | [ 0.000000] soft-irq read-recursion/312: ok | [ 0.000000] hard-irq read-recursion/321: ok | [ 0.000000] soft-irq read-recursion/321: ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] | Wound/wait tests | [ 0.000000] --------------------- [ 0.000000] ww api failures: ok | ok | ok | [ 0.000000] ww contexts mixing:failed| ok | [ 0.000000] finishing ww context: ok | ok | ok | ok | [ 0.000000] locking mismatches: ok | ok | ok | [ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | [ 0.000000] spinlock nest unlocked: ok | [ 0.000000] ----------------------------------------------------- [ 0.000000] |block | try |context| [ 0.000000] ----------------------------------------------------- [ 0.000000] context:failed| ok | ok | [ 0.000000] try:failed| ok |failed| [ 0.000000] block:failed| ok |failed| [ 0.000000] spinlock:failed| ok |failed| [ 0.000000] -------------------------------------------------------- [ 0.000000] 141 out of 253 testcases failed, as expected. | [ 0.000000] ---------------------------------------------------- [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2693.528 MHz processor [ 0.006666] Calibrating delay loop (skipped) preset value.. 5389.51 BogoMIPS (lpj=8978426) [ 0.006666] pid_max: default: 32768 minimum: 301 [ 0.006666] ACPI: Core revision 20141107 [ 0.009230] ACPI: All ACPI Tables successfully acquired [ 0.010149] Security Framework initialized [ 0.011071] Yama: becoming mindful. [ 0.011595] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.012751] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.013882] Initializing cgroup subsys devices [ 0.014716] Initializing cgroup subsys freezer [ 0.015453] Initializing cgroup subsys perf_event [ 0.016686] Initializing cgroup subsys net_prio [ 0.017562] mce: CPU supports 10 MCE banks [ 0.018430] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.018430] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.040911] debug: unmapping init [mem 0xffffffff83634000-0xffffffff8363afff] [ 0.046205] ftrace: allocating 42074 entries in 165 pages [ 0.063750] Getting VERSION: 1050014 [ 0.064420] Getting VERSION: 1050014 [ 0.066685] Getting ID: 0 [ 0.067072] Getting ID: ff000000 [ 0.067575] Getting LVT0: 8700 [ 0.068017] Getting LVT1: 8400 [ 0.068536] enabled ExtINT on CPU#0 [ 0.070702] ENABLING IO-APIC IRQs [ 0.071198] init IO_APIC IRQs [ 0.071619] apic 0 pin 0 not connected [ 0.072220] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.073435] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.074681] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.076052] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.076697] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.077790] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.078876] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.080030] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.081132] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.082221] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.083363] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.084479] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.085600] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.086697] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.087807] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.088921] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.090026] apic 0 pin 16 not connected [ 0.090572] apic 0 pin 17 not connected [ 0.091115] apic 0 pin 18 not connected [ 0.091654] apic 0 pin 19 not connected [ 0.092206] apic 0 pin 20 not connected [ 0.093341] apic 0 pin 21 not connected [ 0.093890] apic 0 pin 22 not connected [ 0.094427] apic 0 pin 23 not connected [ 0.095123] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.095932] smpboot: CPU0: Intel Xeon E312xx (Sandy Bridge) (fam: 06, model: 2a, stepping: 01) [ 0.097597] TSC deadline timer enabled [ 0.098356] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. [ 0.099999] x86: Booted up 1 node, 1 CPUs [ 0.099999] ---------------- [ 0.100014] | NMI testsuite: [ 0.100423] -------------------- [ 0.100969] remote IPI: ok | [ 0.101461] local IPI: ok | [ 0.101985] -------------------- [ 0.102431] Good, all 2 testcases passed! | [ 0.103045] --------------------------------- [ 0.103344] smpboot: Total of 1 processors activated (5389.51 BogoMIPS) [ 0.105225] devtmpfs: initialized [ 0.116435] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.116682] pinctrl core: initialized pinctrl subsystem [ 0.117625] RTC time: 10:53:28, date: 12/12/14 [ 0.118536] NET: Registered protocol family 16 [ 0.120620] ACPI: bus type PCI registered [ 0.121307] PCI: Using configuration type 1 for base access [ 0.140827] Running resizable hashtable tests... [ 0.141545] Adding 2048 keys [ 0.143328] Traversal complete: counted=2048, nelems=2048, entries=2048 [ 0.143544] Table expansion iteration 0... [ 0.144628] Verifying lookups... [ 0.145404] Table expansion iteration 1... [ 0.146622] Verifying lookups... [ 0.146865] Table expansion iteration 2... [ 0.148142] Verifying lookups... [ 0.148898] Table expansion iteration 3... [ 0.151362] Verifying lookups... [ 0.152156] Table shrinkage iteration 0... [ 0.153015] Verifying lookups... [ 0.153527] Table shrinkage iteration 1... [ 0.154293] Verifying lookups... [ 0.154936] Table shrinkage iteration 2... [ 0.155637] Verifying lookups... [ 0.156413] Table shrinkage iteration 3... [ 0.156705] Verifying lookups... [ 0.157454] Traversal complete: counted=2048, nelems=2048, entries=2048 [ 0.158327] Deleting 2048 keys [ 0.159775] gpio-f7188x: Not a Fintek device at 0x0000002e [ 0.160060] gpio-f7188x: Not a Fintek device at 0x0000004e [ 0.161228] ACPI: Added _OSI(Module Device) [ 0.161798] ACPI: Added _OSI(Processor Device) [ 0.162431] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.163073] ACPI: Added _OSI(Processor Aggregator Device) [ 0.169303] ACPI: Interpreter enabled [ 0.169979] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580) [ 0.170731] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 0.172083] ACPI: (supports S0 S3 S5) [ 0.172581] ACPI: Using IOAPIC for interrupt routing [ 0.173399] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.185664] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.186524] acpi PNP0A03:00: _OSC: OS supports [Segments] [ 0.186709] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.188274] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.191368] PCI host bridge to bus 0000:00 [ 0.192085] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.193128] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.193348] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.194477] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.195723] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.196762] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.198645] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.200540] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.204659] pci 0000:00:01.1: reg 0x20: [io 0xc080-0xc08f] [ 0.206723] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.207930] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.208915] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.209886] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.210429] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.211889] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.213086] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.213874] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.217592] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.220190] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.229335] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.231434] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.233350] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [ 0.235445] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.241874] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 0.243460] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.245840] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f] [ 0.247299] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff] [ 0.254593] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000 [ 0.256196] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f] [ 0.260971] pci_bus 0000:00: on NUMA node 0 [ 0.263120] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.263925] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.265199] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.266200] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.266938] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.268480] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.269084] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.270016] vgaarb: loaded [ 0.270376] vgaarb: bridge control possible 0000:00:02.0 [ 0.271973] Linux video capture interface: v2.00 [ 0.272637] pps_core: LinuxPPS API ver. 1 registered [ 0.273141] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.273365] PTP clock support registered [ 0.274216] wmi: Mapper loaded [ 0.274772] PCI: Using ACPI for IRQ routing [ 0.275212] PCI: pci_cache_line_size set to 64 bytes [ 0.275872] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.276498] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff] [ 0.277402] NET: Registered protocol family 23 [ 0.277915] Bluetooth: Core ver 2.20 [ 0.278332] NET: Registered protocol family 31 [ 0.278791] Bluetooth: HCI device and connection manager initialized [ 0.279464] Bluetooth: HCI socket layer initialized [ 0.279985] Bluetooth: L2CAP socket layer initialized [ 0.280053] Bluetooth: SCO socket layer initialized [ 0.280935] cfg80211: Calling CRDA to update world regulatory domain [ 0.282081] nfc: nfc_init: NFC Core ver 0.1 [ 0.282591] NET: Registered protocol family 39 [ 0.283884] Switched to clocksource kvm-clock [ 0.284942] Warning: could not register all branches stats [ 0.285525] Warning: could not register annotated branches stats [ 0.314854] pnp: PnP ACPI init [ 0.315389] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.316312] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.317077] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.317951] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.318674] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.319573] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.320334] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.321166] pnp 00:03: [dma 2] [ 0.321542] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.322298] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.323287] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.324382] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.325578] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.326456] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.327342] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.328345] pnp: PnP ACPI: found 7 devices [ 0.334471] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.335058] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.335623] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.336264] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.336972] NET: Registered protocol family 1 [ 0.337439] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.338064] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.338663] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.339322] pci 0000:00:02.0: Video device with shadowed ROM [ 0.339945] PCI: CLS 0 bytes, default 64 [ 0.340575] Unpacking initramfs... [ 0.616338] debug: unmapping init [mem 0xffff880013c33000-0xffff880013feffff] [ 0.617737] kvm: no hardware support [ 0.618146] has_svm: not amd [ 0.618448] kvm: no hardware support [ 0.625289] Machine check injector initialized [ 0.629278] AVX version of gcm_enc/dec engaged. [ 0.629756] AES CTR mode by8 optimization enabled [ 0.631516] sha1_ssse3: Using AVX optimized SHA-1 implementation [ 0.632565] sha256_ssse3: Using AVX optimized SHA-256 implementation [ 0.633816] sha512_ssse3: Using AVX optimized SHA-512 implementation [ 0.638040] AVX2 or AES-NI instructions are not detected. [ 0.638668] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0 [ 0.640746] spin_lock-torture: Creating torture_shuffle task [ 0.641730] spin_lock-torture: Creating torture_stutter task [ 0.642683] spin_lock-torture: torture_shuffle task started [ 0.644078] spin_lock-torture: Creating lock_torture_writer task [ 0.645125] spin_lock-torture: torture_stutter task started [ 0.646036] spin_lock-torture: Creating lock_torture_writer task [ 0.647109] spin_lock-torture: lock_torture_writer task started [ 0.648160] spin_lock-torture: Creating lock_torture_stats task [ 0.649117] spin_lock-torture: lock_torture_writer task started [ 0.649779] torture_init_begin: refusing rcu init: spin_lock running [ 0.651063] futex hash table entries: 256 (order: 3, 32768 bytes) [ 0.651762] Initialise system trusted keyring [ 0.652409] audit: initializing netlink subsys (disabled) [ 0.653259] audit: type=2000 audit(1418352808.710:1): initialized [ 0.654804] spin_lock-torture: lock_torture_stats task started [ 0.655829] zbud: loaded [ 0.656329] VFS: Disk quotas dquot_6.5.2 [ 0.656784] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.657793] msgmni has been set to 517 [ 0.663453] NET: Registered protocol family 38 [ 0.663960] test_string_helpers: Running tests... [ 0.664716] test_firmware: interface ready [ 0.666092] cr_bllcd: INTEL CARILLO RANCH LPC not found. [ 0.666654] cr_bllcd: Carillo Ranch Backlight Driver Initialized. [ 0.667683] VIA Graphics Integration Chipset framebuffer 2.4 initializing [ 0.668537] vmlfb: initializing [ 0.668951] no IO addresses supplied [ 0.669448] hgafb: HGA card not detected. [ 0.669873] hgafb: probe of hgafb.0 failed with error -22 [ 0.670797] cirrusfb 0000:00:02.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0xfc000000 [ 0.672560] hv_vmbus: registering driver hyperv_fb [ 0.673416] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.674177] ACPI: Power Button [PWRF] [ 0.674941] button: probe of LNXPWRBN:00 failed with error -22 [ 0.676488] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.677115] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.717380] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 0.717993] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.744832] platform serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.748185] serial: Freescale lpuart driver [ 0.749519] lp: driver loaded but no devices found [ 0.750435] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 0.751731] ac.o: No PCI boards found. [ 0.752430] ac.o: For an ISA board you must supply memory and irq parameters. [ 0.753951] Non-volatile memory driver v1.3 [ 0.754882] ppdev: user-space parallel port driver [ 0.755780] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 0.756776] smapi::smapi_init, ERROR invalid usSmapiID [ 0.757715] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 0.759298] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 0.760600] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 0.761557] SyncLink PC Card driver $Revision: 4.34 $, tty major#245 [ 0.763039] [drm] Initialized drm 1.1.0 20060810 [ 0.764021] [drm] radeon kernel modesetting enabled. [ 0.766721] parport_pc 00:04: reported by Plug and Play ACPI [ 0.767866] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] [ 0.769621] lp0: using parport0 (interrupt-driven). [ 0.771581] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 0.772889] dummy-irq: no IRQ given. Use irq=N [ 0.773433] Phantom Linux Driver, version n0.9.8, init OK [ 0.774204] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 0.775151] Guest personality initialized and is inactive [ 0.775781] VMCI host device registered (name=vmci, major=10, minor=60) [ 0.776456] Initialized host personality [ 0.776967] mic_init not running on X100 ret -19 [ 0.778308] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue [ 0.779097] device id = 2440 [ 0.779399] device id = 2480 [ 0.779699] device id = 24c0 [ 0.780022] device id = 24d0 [ 0.780323] device id = 25a1 [ 0.780621] device id = 2670 [ 0.781014] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks. [ 0.781763] pmc551: not detected [ 0.788246] parport0: powerup/reset Butterfly [ 0.900193] parport_pc 00:04: registered master spi42 [ 0.901053] spi spi42.1: spi_bitbang_setup, 66 nsec/bit [ 0.901759] spi spi42.1: setup mode 0, 8 bits/w, 15000000 Hz max --> 0 [ 0.903748] parport_pc 00:04: registered child spi42.1 [ 0.904432] parport0: dataflash at spi42.1 [ 0.904969] parport0: AVR Butterfly [ 0.905529] parport0: cannot grant exclusive access for device spi-lm70llp [ 0.906423] spi-lm70llp: spi_lm70llp probe fail, status -12 [ 0.908724] libphy: Fixed MDIO Bus: probed [ 0.909818] arcnet loaded. [ 0.910233] arcnet: RFC1201 "standard" (`a') encapsulation support loaded. [ 0.911126] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. [ 0.912088] arcnet: cap mode (`c') encapsulation support loaded. [ 0.912892] arcnet: RIM I (entirely mem-mapped) support [ 0.913608] E-mail me if you actually test the RIM I driver, please! [ 0.914432] Given: node 00h, shmem 0h, irq 0 [ 0.915016] No autoprobe for RIM I; you must specify the shmem and irq! [ 0.915923] vcan: Virtual CAN interface driver [ 0.916513] CAN device driver interface [ 0.917076] sja1000 CAN netdevice driver [ 0.917599] sja1000_isa: insufficient parameters supplied [ 0.918528] cc770: CAN netdevice driver [ 0.919045] cc770_isa: insufficient parameters supplied [ 0.920474] PPP generic driver version 2.4.2 [ 0.921258] PPP BSD Compression module registered [ 0.921883] PPP Deflate Compression module registered [ 0.922575] PPP MPPE Compression module registered [ 0.923227] NET: Registered protocol family 24 [ 0.923859] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 0.925095] SLIP linefill/keepalive option. [ 0.925731] DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org. [ 0.926544] LAPB Ethernet driver version 0.02 [ 0.927143] hv_vmbus: registering driver hv_netvsc [ 0.927984] parport0: cannot grant exclusive access for device ks0108 [ 0.928818] ks0108: ERROR: parport didn't register new device [ 0.929577] cfag12864b: ERROR: ks0108 is not initialized [ 0.930300] cfag12864bfb: ERROR: cfag12864b is not initialized [ 0.931452] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.933520] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.934211] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.934895] parport0: cannot grant exclusive access for device parkbd [ 0.935919] hv_vmbus: registering driver hyperv_keyboard [ 0.937109] mousedev: PS/2 mouse device common for all mice [ 0.938849] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.939985] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 0.941924] mk712: device not present [ 0.942744] i2c /dev entries driver [ 0.943558] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 0.948645] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 0.950215] evbug: Connected device: input3 (ImExPS/2 Generic Explorer Mouse at isa0060/serio1/input0) [ 1.030356] i2c-parport: adapter type unspecified [ 1.030994] i2c-parport-light: adapter type unspecified [ 1.033125] smssdio: Siano SMS1xxx SDIO driver [ 1.033726] smssdio: Copyright Pierre Ossman [ 1.034568] pps pps0: new PPS source ktimer [ 1.035138] pps pps0: ktimer PPS source registered [ 1.035760] pps_ldisc: PPS line discipline registered [ 1.036424] pps_parport: parallel port PPS client [ 1.037069] parport0: cannot grant exclusive access for device pps_parport [ 1.037954] pps_parport: couldn't register with parport0 [ 1.038683] Driver for 1-wire Dallas network protocol. [ 1.039507] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 1.040399] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 1.041707] power_supply test_ac: uevent [ 1.042235] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 1.042979] power_supply test_ac: prop ONLINE=1 [ 1.043659] power_supply test_ac: power_supply_changed [ 1.044512] power_supply test_battery: uevent [ 1.045087] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 1.045924] power_supply test_battery: prop STATUS=Discharging [ 1.046701] power_supply test_battery: prop CHARGE_TYPE=Fast [ 1.047445] power_supply test_battery: prop HEALTH=Good [ 1.048128] power_supply test_battery: prop PRESENT=1 [ 1.048779] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 1.049529] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 1.050352] power_supply test_battery: prop CHARGE_FULL=100 [ 1.051091] power_supply test_battery: prop CHARGE_NOW=50 [ 1.051972] power_supply test_battery: prop CAPACITY=50 [ 1.052888] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 1.053759] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 1.054584] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 1.055434] power_supply test_battery: prop MODEL_NAME=Test battery [ 1.056253] power_supply test_battery: prop MANUFACTURER=Linux [ 1.057029] power_supply test_battery: prop SERIAL_NUMBER=3.18.0-g5fbea33 [ 1.057911] power_supply test_battery: prop TEMP=26 [ 1.058588] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 1.059666] power_supply test_battery: power_supply_changed [ 1.060526] power_supply test_usb: uevent [ 1.061062] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 1.061816] power_supply test_usb: prop ONLINE=1 [ 1.062462] power_supply test_usb: power_supply_changed [ 1.063709] power_supply test_ac: power_supply_changed_work [ 1.064450] power_supply test_ac: power_supply_update_gen_leds 1 [ 1.065258] power_supply test_ac: uevent [ 1.065772] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 1.066516] power_supply test_ac: prop ONLINE=1 [ 1.067148] power_supply test_battery: power_supply_changed_work [ 1.067927] power_supply test_battery: power_supply_update_bat_leds 2 [ 1.068762] power_supply test_battery: uevent [ 1.069340] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 1.070207] power_supply test_battery: prop STATUS=Discharging [ 1.070967] power_supply test_battery: prop CHARGE_TYPE=Fast [ 1.071698] power_supply test_battery: prop HEALTH=Good [ 1.072389] power_supply test_battery: prop PRESENT=1 [ 1.073056] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 1.073824] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 1.074636] power_supply test_battery: prop CHARGE_FULL=100 [ 1.075364] power_supply test_battery: prop CHARGE_NOW=50 [ 1.076065] power_supply test_battery: prop CAPACITY=50 [ 1.076764] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 1.077561] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 1.078367] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 1.079162] power_supply test_battery: prop MODEL_NAME=Test battery [ 1.079971] power_supply test_battery: prop MANUFACTURER=Linux [ 1.080746] power_supply test_battery: prop SERIAL_NUMBER=3.18.0-g5fbea33 [ 1.081629] power_supply test_battery: prop TEMP=26 [ 1.082274] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 1.083107] power_supply test_usb: power_supply_changed_work [ 1.083867] power_supply test_usb: power_supply_update_gen_leds 1 [ 1.084666] power_supply test_usb: uevent [ 1.085201] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 1.085955] power_supply test_usb: prop ONLINE=1 [ 1.093415] w83793: Detection failed at check vendor id [ 1.113422] w83793: Detection failed at check vendor id [ 1.133426] w83793: Detection failed at check vendor id [ 1.153411] w83793: Detection failed at check vendor id [ 1.166781] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 1.180162] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 1.193423] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 1.206748] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 1.220076] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 1.233455] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 1.246771] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 1.260163] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 1.446811] i2c i2c-0: ADM1025 detection failed at 0x2c [ 1.460235] i2c i2c-0: ADM1025 detection failed at 0x2d [ 1.473444] i2c i2c-0: ADM1025 detection failed at 0x2e [ 1.493497] i2c i2c-0: Detecting device at 0,0x2c with COMPANY: 0xff and VERSTEP: 0xff [ 1.494777] i2c i2c-0: Autodetecting device at 0,0x2c... [ 1.495655] i2c i2c-0: Autodetection failed [ 1.513450] i2c i2c-0: Detecting device at 0,0x2d with COMPANY: 0xff and VERSTEP: 0xff [ 1.514719] i2c i2c-0: Autodetecting device at 0,0x2d... [ 1.515570] i2c i2c-0: Autodetection failed [ 1.533448] i2c i2c-0: Detecting device at 0,0x2e with COMPANY: 0xff and VERSTEP: 0xff [ 1.534706] i2c i2c-0: Autodetecting device at 0,0x2e... [ 1.535562] i2c i2c-0: Autodetection failed [ 1.626877] tsc: Refined TSC clocksource calibration: 2693.506 MHz [ 1.926764] applesmc: supported laptop not found! [ 1.927426] applesmc: driver init failed (ret=-19)! [ 2.193528] f71882fg: Not a Fintek device [ 2.194141] f71882fg: Not a Fintek device [ 2.233427] (null): Unknown chip type, skipping [ 2.246747] (null): Unknown chip type, skipping [ 2.560087] i2c i2c-0: Unsupported chip (man_id=0xFF, chip_id=0xFF) [ 2.606740] i2c i2c-0: Unsupported chip (man_id=0xFF, chip_id=0xFF) [ 2.653416] i2c i2c-0: Unsupported chip (man_id=0xFF, chip_id=0xFF) [ 7.340087] i2c i2c-0: Unsupported chip at 0x18 (man_id=0xFF, chip_id=0xFF) [ 7.373424] i2c i2c-0: Unsupported chip at 0x19 (man_id=0xFF, chip_id=0xFF) [ 7.406741] i2c i2c-0: Unsupported chip at 0x1a (man_id=0xFF, chip_id=0xFF) [ 7.440083] i2c i2c-0: Unsupported chip at 0x29 (man_id=0xFF, chip_id=0xFF) [ 7.473424] i2c i2c-0: Unsupported chip at 0x2a (man_id=0xFF, chip_id=0xFF) [ 7.506754] i2c i2c-0: Unsupported chip at 0x2b (man_id=0xFF, chip_id=0xFF) [ 7.540086] i2c i2c-0: Unsupported chip at 0x48 (man_id=0xFF, chip_id=0xFF) [ 7.573453] i2c i2c-0: Unsupported chip at 0x49 (man_id=0xFF, chip_id=0xFF) [ 7.606749] i2c i2c-0: Unsupported chip at 0x4a (man_id=0xFF, chip_id=0xFF) [ 7.640081] i2c i2c-0: Unsupported chip at 0x4b (man_id=0xFF, chip_id=0xFF) [ 7.673424] i2c i2c-0: Unsupported chip at 0x4c (man_id=0xFF, chip_id=0xFF) [ 7.706742] i2c i2c-0: Unsupported chip at 0x4d (man_id=0xFF, chip_id=0xFF) [ 7.740099] i2c i2c-0: Unsupported chip at 0x4e (man_id=0xFF, chip_id=0xFF) [ 7.773454] i2c i2c-0: Unsupported chip at 0x4f (man_id=0xFF, chip_id=0xFF) [ 7.973443] i2c i2c-0: detect failed, bad manufacturer id 0xff! [ 7.986754] i2c i2c-0: detect failed, bad manufacturer id 0xff! [ 8.000087] i2c i2c-0: detect failed, bad manufacturer id 0xff! [ 8.340357] sch56xx_common: Unsupported device id: 0xff [ 8.341239] sch56xx_common: Unsupported device id: 0xff [ 8.360091] i2c i2c-0: SMSC47M192 detection failed at 0x2c [ 8.380100] i2c i2c-0: SMSC47M192 detection failed at 0x2d [ 8.386783] i2c i2c-0: amc6821_detect called. [ 8.400112] i2c i2c-0: amc6821: detection failed at 0x18. [ 8.406775] i2c i2c-0: amc6821_detect called. [ 8.420089] i2c i2c-0: amc6821: detection failed at 0x19. [ 8.426770] i2c i2c-0: amc6821_detect called. [ 8.440088] i2c i2c-0: amc6821: detection failed at 0x1a. [ 8.446767] i2c i2c-0: amc6821_detect called. [ 8.460091] i2c i2c-0: amc6821: detection failed at 0x2c. [ 8.466756] i2c i2c-0: amc6821_detect called. [ 8.480100] i2c i2c-0: amc6821: detection failed at 0x2d. [ 8.486748] i2c i2c-0: amc6821_detect called. [ 8.500096] i2c i2c-0: amc6821: detection failed at 0x2e. [ 8.506750] i2c i2c-0: amc6821_detect called. [ 8.520075] i2c i2c-0: amc6821: detection failed at 0x4c. [ 8.526735] i2c i2c-0: amc6821_detect called. [ 8.540086] i2c i2c-0: amc6821: detection failed at 0x4d. [ 8.546760] i2c i2c-0: amc6821_detect called. [ 8.560082] i2c i2c-0: amc6821: detection failed at 0x4e. [ 8.627397] advantechwdt: WDT driver for Advantech single board computer initialising [ 8.629049] advantechwdt: initialized. timeout=60 sec (nowayout=0) [ 8.630123] alim7101_wdt: Steve Hill [ 8.630959] alim7101_wdt: ALi M7101 PMU not present - WDT not set [ 8.631995] ib700wdt: WDT driver for IB700 single board computer initialising [ 8.633289] ib700wdt: START method I/O 443 is not available [ 8.634172] ib700wdt: probe of ib700wdt failed with error -5 [ 8.635124] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising [ 8.636522] wafer5823wdt: I/O address 0x0443 already in use [ 8.637557] it87_wdt: no device [ 8.638036] pc87413_wdt: Version 1.1 at io 0x2E [ 8.638860] pc87413_wdt: cannot register miscdev on minor=130 (err=-16) [ 8.639921] sbc60xxwdt: I/O address 0x0443 already in use [ 8.640816] cpu5wdt: misc_register failed [ 8.641539] w83877f_wdt: I/O address 0x0443 already in use [ 8.642400] w83977f_wdt: driver v1.00 [ 8.643119] w83977f_wdt: cannot register miscdev on minor=130 (err=-16) [ 8.644230] machzwd: MachZ ZF-Logic Watchdog driver initializing [ 8.645172] machzwd: no ZF-Logic found [ 8.646128] Bluetooth: HCI UART driver ver 2.2 [ 8.646825] Bluetooth: HCI H4 protocol initialized [ 8.647581] Bluetooth: HCI BCSP protocol initialized [ 8.648438] Bluetooth: HCIATH3K protocol initialized [ 8.649284] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 8.657921] ISDN subsystem Rev: 1.1.2.3/1.1.2.2/none/none/1.1.2.2 [ 8.659361] CAPI 2.0 started up with major 68 (middleware) [ 8.660269] Modular ISDN core version 1.1.29 [ 8.661321] NET: Registered protocol family 34 [ 8.662023] DSP module 2.0 [ 8.662498] mISDN_dsp: DSP clocks every 80 samples. This equals 3 jiffies. [ 8.668022] mISDN: Layer-1-over-IP driver Rev. 2.00 [ 8.669147] 0 virtual devices registered [ 8.669803] mISDN: HFC-multi driver 2.03 [ 8.670530] AVM Fritz PCI driver Rev. 2.3 [ 8.671185] Sedlbauer Speedfax+ Driver Rev. 2.0 [ 8.672079] Infineon ISDN Driver Rev. 1.0 [ 8.672752] Winbond W6692 PCI driver Rev. 2.0 [ 8.673458] Netjet PCI driver Rev. 2.0 [ 8.674032] mISDNipac module version 2.0 [ 8.674564] mISDN: ISAR driver Rev. 2.1 [ 8.675127] dss1_divert module successfully installed [ 8.675803] gigaset: Driver for Gigaset 307x [ 8.676381] gigaset: ISDN4Linux interface [ 8.677190] Driver 'mmc_test' needs updating - please use bus_type methods [ 8.678149] sdhci: Secure Digital Host Controller Interface driver [ 8.678977] sdhci: Copyright(c) Pierre Ossman [ 8.679639] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 8.680453] wbsd: Copyright(c) Pierre Ossman [ 8.681236] sdhci-pltfm: SDHCI platform and OF driver helper [ 8.682311] leds_ss4200: no LED devices found [ 8.683050] ledtrig-cpu: registered to indicate activity on CPUs [ 8.684089] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 8.685322] hv_vmbus: registering driver hid_hyperv [ 8.686911] panel: could not claim access to parport0. Aborting. [ 8.687742] panel: driver version 0.9.5 not yet registered [ 8.688669] FPGA DOWNLOAD ---> [ 8.689100] FPGA image file name: xlinx_fpga_firmware.bit [ 8.689926] GPIO INIT FAIL!! [ 8.690531] msi_laptop: Brightness ignored, must be controlled by ACPI video driver [ 8.691953] dell_wmi: No known WMI GUID found [ 8.692544] dell_wmi_aio: No known WMI GUID found [ 8.693194] acerhdf: Acer Aspire One Fan driver, v.0.5.26 [ 8.693942] acerhdf: unknown (unsupported) BIOS version Bochs/Bochs/Bochs, please report, aborting! [ 8.695720] FUJ02B1: call_fext_func: FUNC interface is not present [ 8.696550] fujitsu_laptop: driver 0.6.0 successfully loaded [ 8.697338] fujitsu_tablet: Unknown (using defaults) [ 8.698049] msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI [ 8.699328] intel_oaktrail: Platform not recognized (You could try the module's force-parameter) [ 8.700612] alienware_wmi: alienware-wmi: No known WMI GUID found [ 8.701600] hv_utils: Registering HyperV Utility Driver [ 8.702300] hv_vmbus: registering driver hv_util [ 8.702932] hv_vmbus: registering driver hv_balloon [ 8.703869] fake-fmc-carrier: mezzanine 0 [ 8.704434] Manufacturer: fake-vendor [ 8.704999] Product name: fake-design-for-testing [ 8.705769] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 8.706729] fmc_write_eeprom fake-design-for-testing-f001: fmc_write_eeprom: no busid passed, refusing all cards [ 8.708107] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 8.709197] fmc_chardev fake-design-for-testing-f001: Created misc device "fake-design-for-testing-f001" [ 8.711081] Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98 [ 8.712098] aedsp16: I/O, IRQ and DMA are mandatory [ 8.712756] pss: mss_io, mss_dma, mss_irq and pss_io must be set. [ 8.713597] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996 [ 8.714597] ad1848: No ISAPnP cards found, trying standard ones... [ 8.715431] MediaTrix audio driver Copyright (C) by Hannu Savolainen 1993-1996 [ 8.716386] I/O, IRQ, DMA and type are mandatory [ 8.717044] Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996 [ 8.718030] I/O, IRQ, DMA and type are mandatory [ 8.718645] sb: Init: Starting Probe... [ 8.719201] sb: Init: Done [ 8.719594] YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 [ 8.720710] MIDI Loopback device driver [ 8.721531] oprofile: using timer interrupt. [ 8.722180] NET: Registered protocol family 26 [ 8.722841] NET: Registered protocol family 17 [ 8.723521] NET: Registered protocol family 15 [ 8.724223] NET: Registered protocol family 4 [ 8.724859] NET: Registered protocol family 5 [ 8.725497] NET: Registered protocol family 9 [ 8.726098] X25: Linux Version 0.2 [ 8.726579] can: controller area network core (rev 20120528 abi 9) [ 8.727479] NET: Registered protocol family 29 [ 8.728093] can: raw protocol (rev 20120528) [ 8.728694] can: broadcast manager protocol (rev 20120528 t) [ 8.730061] IrCOMM protocol (Dag Brattli) [ 8.733726] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.734459] Bluetooth: BNEP socket layer initialized [ 8.735140] Bluetooth: CMTP (CAPI Emulation) ver 1.0 [ 8.735803] Bluetooth: CMTP socket layer initialized [ 8.736473] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 8.737295] Bluetooth: HIDP socket layer initialized [ 8.737989] NET: Registered protocol family 35 [ 8.738638] 8021q: 802.1Q VLAN Support v1.8 [ 8.739291] 9pnet: Installing 9P2000 support [ 8.739943] NET: Registered protocol family 36 [ 8.740810] batman_adv: B.A.T.M.A.N. advanced 2014.4.0 (compatibility version 15) loaded [ 8.742113] NET: Registered protocol family 40 [ 8.743752] [ 8.743752] printing PIC contents [ 8.744414] ... PIC IMR: ffff [ 8.744830] ... PIC IRR: 1013 [ 8.745259] ... PIC ISR: 0000 [ 8.745673] ... PIC ELCR: 0c00 [ 8.746103] printing local APIC contents on CPU#0/0: [ 8.746677] ... APIC ID: 00000000 (0) [ 8.746677] ... APIC VERSION: 01050014 [ 8.746677] ... APIC TASKPRI: 00000000 (00) [ 8.746677] ... APIC PROCPRI: 00000000 [ 8.746677] ... APIC LDR: 01000000 [ 8.746677] ... APIC DFR: ffffffff [ 8.746677] ... APIC SPIV: 000001ff [ 8.746677] ... APIC ISR field: [ 8.746677] 0000000000000000000000000000000000000000000000000000000000000000 [ 8.746677] ... APIC TMR field: [ 8.746677] 0000000000000000000000000000000000000000000000000000000000000000 [ 8.746677] ... APIC IRR field: [ 8.746677] 0000000000000000000000000000000000000000000000000000000000008000 [ 8.746677] ... APIC ESR: 00000000 [ 8.746677] ... APIC ICR: 00000831 [ 8.746677] ... APIC ICR2: 01000000 [ 8.746677] ... APIC LVTT: 000400ef [ 8.746677] ... APIC LVTPC: 00010000 [ 8.746677] ... APIC LVT0: 00010700 [ 8.746677] ... APIC LVT1: 00000400 [ 8.746677] ... APIC LVTERR: 000000fe [ 8.746677] ... APIC TMICT: 00000000 [ 8.746677] ... APIC TMCCT: 00000000 [ 8.746677] ... APIC TDCR: 00000000 [ 8.746677] [ 8.760531] number of MP IRQ sources: 15. [ 8.761077] number of IO-APIC #0 registers: 24. [ 8.761675] testing the IO APIC....................... [ 8.762372] IO APIC #0...... [ 8.762760] .... register #00: 00000000 [ 8.763291] ....... : physical APIC id: 00 [ 8.763886] ....... : Delivery Type: 0 [ 8.764430] ....... : LTS : 0 [ 8.764970] .... register #01: 00170011 [ 8.765480] ....... : max redirection entries: 17 [ 8.766149] ....... : PRQ implemented: 0 [ 8.766729] ....... : IO APIC version: 11 [ 8.767321] .... register #02: 00000000 [ 8.767830] ....... : arbitration: 00 [ 8.768367] .... IRQ redirection table: [ 8.768888] 1 0 0 0 0 0 0 00 [ 8.769507] 0 0 0 0 0 1 1 31 [ 8.770143] 0 0 0 0 0 1 1 30 [ 8.770756] 0 0 0 0 0 1 1 33 [ 8.771380] 1 0 0 0 0 1 1 34 [ 8.771999] 1 1 0 0 0 1 1 35 [ 8.772612] 0 0 0 0 0 1 1 36 [ 8.773240] 0 0 0 0 0 1 1 37 [ 8.773871] 0 0 0 0 0 1 1 38 [ 8.774493] 1 1 0 0 0 1 1 39 [ 8.775118] 1 1 0 0 0 1 1 3A [ 8.775728] 1 1 0 0 0 1 1 3B [ 8.776347] 0 0 0 0 0 1 1 3C [ 8.776984] 0 0 0 0 0 1 1 3D [ 8.777597] 0 0 0 0 0 1 1 3E [ 8.778218] 0 0 0 0 0 1 1 3F [ 8.778829] 1 0 0 0 0 0 0 00 [ 8.779452] 1 0 0 0 0 0 0 00 [ 8.780089] 1 0 0 0 0 0 0 00 [ 8.780703] 1 0 0 0 0 0 0 00 [ 8.781323] 1 0 0 0 0 0 0 00 [ 8.781938] 1 0 0 0 0 0 0 00 [ 8.782549] 1 0 0 0 0 0 0 00 [ 8.783182] 1 0 0 0 0 0 0 00 [ 8.783803] IRQ to pin mappings: [ 8.784251] IRQ0 -> 0:2 [ 8.784628] IRQ1 -> 0:1 [ 8.785014] IRQ3 -> 0:3 [ 8.785391] IRQ4 -> 0:4 [ 8.785768] IRQ5 -> 0:5 [ 8.786152] IRQ6 -> 0:6 [ 8.786529] IRQ7 -> 0:7 [ 8.786937] IRQ8 -> 0:8 [ 8.787311] IRQ9 -> 0:9 [ 8.787687] IRQ10 -> 0:10 [ 8.788093] IRQ11 -> 0:11 [ 8.788492] IRQ12 -> 0:12 [ 8.788890] IRQ13 -> 0:13 [ 8.789297] IRQ14 -> 0:14 [ 8.789697] IRQ15 -> 0:15 [ 8.790128] .................................... done. [ 8.791334] Loading compiled-in X.509 certificates [ 8.792027] Problem loading in-kernel X.509 certificate (-19) [ 8.792801] registered taskstats version 1 [ 8.793392] Running ring buffer tests... [ 18.793436] finished [ 18.793696] CPU 0: [ 18.793916] events: 11241 [ 18.794334] dropped bytes: 0 [ 18.794721] alloced bytes: 875480 [ 18.795155] written bytes: 858850 [ 18.795583] biggest event: 65 [ 18.795981] smallest event: 0 [ 18.801296] read events: 11241 [ 18.801711] lost events: 0 [ 18.802093] total events: 11241 [ 18.802501] recorded len bytes: 875480 [ 18.802932] recorded size bytes: 858850 [ 18.803366] Ring buffer PASSED! [ 18.804655] Key type trusted registered [ 18.805359] RIO: rio_register_scan for mport_id=-1 [ 18.806142] Magic number: 10:337:881 [ 18.806631] tty ptyx5: hash matches [ 18.807292] console [netcon0] enabled [ 18.807677] netconsole: network logging started [ 18.808901] debug: unmapping init [mem 0xffffffff83494000-0xffffffff83633fff] [ 18.809725] Write protecting the kernel read-only data: 28672k [ 18.811244] debug: unmapping init [mem 0xffff88000210d000-0xffff8800021fffff] [ 18.812049] debug: unmapping init [mem 0xffff880002b3c000-0xffff880002bfffff] /etc/rcS.d/S00fbsetup: line 3: /sbin/modprobe: not found Please wait: booting... Starting udev mount: mounting none on /dev failed: Invalid argument /etc/rcS.d/S03udev: line 72: can't create /proc/sys/kernel/hotplug: nonexistent directory error getting signalfd [ 18.850452] udevd[195]: segfault at ffffffffff600400 ip ffffffffff600400 sp 00007fffdfeaab88 error 15 Segmentation fault error sending message: Connection refused [ 18.853619] udevadm[196]: segfault at ffffffffff600400 ip ffffffffff600400 sp 00007fff06ff2a08 error 15 Segmentation fault [ 18.906780] power_supply test_ac: uevent [ 18.907213] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 18.907793] power_supply test_ac: prop ONLINE=1 [ 18.908305] power_supply test_battery: uevent [ 18.908756] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 18.909423] power_supply test_battery: prop STATUS=Discharging [ 18.910043] power_supply test_battery: prop CHARGE_TYPE=Fast [ 18.910626] power_supply test_battery: prop HEALTH=Good [ 18.911167] power_supply test_battery: prop PRESENT=1 [ 18.911678] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 18.912270] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 18.912909] power_supply test_battery: prop CHARGE_FULL=100 [ 18.913500] power_supply test_battery: prop CHARGE_NOW=50 [ 18.914060] power_supply test_battery: prop CAPACITY=50 [ 18.914595] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 18.915220] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 18.915848] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 18.916474] power_supply test_battery: prop MODEL_NAME=Test battery [ 18.917132] power_supply test_battery: prop MANUFACTURER=Linux [ 18.917728] power_supply test_battery: prop SERIAL_NUMBER=3.18.0-g5fbea33 [ 18.918429] power_supply test_battery: prop TEMP=26 [ 18.918938] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 18.919596] power_supply test_usb: uevent [ 18.920037] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 18.920634] power_supply test_usb: prop ONLINE=1 error sending message: Connection refused [ 18.938407] udevadm[198]: segfault at ffffffffff600400 ip ffffffffff600400 sp 00007fff0ceb80e8 error 15 Segmentation fault Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory bootlogd. [ 18.959051] init[1]: segfault at ffffffffff600400 ip ffffffffff600400 sp 00007fffa5199598 error 15 [ 18.960174] init[1]: segfault at ffffffffff600400 ip ffffffffff600400 sp 00007fffa5198a78 error 15 [ 18.961242] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 18.961242] [ 18.962183] CPU: 0 PID: 1 Comm: init Not tainted 3.18.0-g5fbea33 #102 [ 18.962834] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 18.963339] 0000000000000001 ffff88001146fc38 ffffffff820e3f19 0000000000000001 [ 18.963339] ffffffff82a10f58 ffff88001146fcb8 ffffffff820df795 ffffffff8116cf66 [ 18.963339] 0000000000000010 ffff88001146fcc8 ffff88001146fc68 ffff88001146fc98 [ 18.963339] Call Trace: [ 18.963339] [] dump_stack+0x7c/0xa9 [ 18.963339] [] panic+0x107/0x2b3 [ 18.963339] [] ? do_exit+0xd86/0x1100 [ 18.963339] [] do_exit+0x1098/0x1100 [ 18.963339] [] ? __sigqueue_free+0x52/0x60 [ 18.963339] [] do_group_exit+0x7f/0x140 [ 18.963339] [] get_signal+0xb85/0xd00 [ 18.963339] [] ? sched_clock_cpu+0x159/0x190 [ 18.963339] [] do_signal+0x24/0x1b0 [ 18.963339] [] ? do_raw_spin_unlock+0xf8/0x150 [ 18.963339] [] ? state_store+0xe0/0x120 [ 18.963339] [] ? printk+0x4d/0x56 [ 18.963339] [] ? vtime_account_user+0x91/0xa0 [ 18.963339] [] ? context_tracking_user_exit+0x13e/0x200 [ 18.963339] [] do_notify_resume+0x1b8/0x200 [ 18.963339] [] retint_signal+0x48/0x8c [ 18.963339] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Elapsed time: 25 qemu-system-x86_64 -enable-kvm -cpu SandyBridge -kernel /kernel/x86_64-randconfig-ib0-12112357/5fbea33740aeb948422d7b7e8aafbeac362264b2/vmlinuz-3.18.0-g5fbea33 -append 'user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-2/rand_boot-1-yocto-minimal-x86_64.cgz-x86_64-randconfig-ib0-12112357-5fbea33740aeb948422d7b7e8aafbeac362264b2-1.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-randconfig-ib0-12112357/5fbea33740aeb948422d7b7e8aafbeac362264b2/vmlinuz-3.18.0-g5fbea33 kconfig=x86_64-randconfig-ib0-12112357 commit=5fbea33740aeb948422d7b7e8aafbeac362264b2 branch=net/master root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/vm-kbuild-yocto-x86_64/boot/1/yocto-minimal-x86_64.cgz/x86_64-randconfig-ib0-12112357/5fbea33740aeb948422d7b7e8aafbeac362264b2/0 ip=::::vm-kbuild-yocto-x86_64-2::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8' -initrd /fs/sdf1/initrd-vm-kbuild-yocto-x86_64-2 -m 320 -smp 1 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/sdf1/disk0-vm-kbuild-yocto-x86_64-2,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-kbuild-yocto-x86_64-2 -serial file:/dev/shm/kboot/serial-vm-kbuild-yocto-x86_64-2 -daemonize -display none -monitor null