lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <548E9DE0.7050502@arm.com>
Date:	Mon, 15 Dec 2014 08:37:52 +0000
From:	Andrew Jackson <Andrew.Jackson@....com>
To:	Lars-Peter Clausen <lars@...afoo.de>,
	Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.de>
CC:	Liam Girdwood <lgirdwood@...il.com>,
	Mark Brown <broonie@...nel.org>,
	Rajeev Kumar <rajeevkumar.linux@...il.com>,
	Liviu Dudau <Liviu.Dudau@....com>,
	Arnd Bergmann <arnd@...db.de>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	"alsa-devel@...a-project.org" <alsa-devel@...a-project.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 2/6] ASoC: dwc: Ensure FIFOs are flushed to prevent
 channel swap

On 12/12/14 09:37, Lars-Peter Clausen wrote:
> On 12/12/2014 10:25 AM, Andrew Jackson wrote:
>> From: Andrew Jackson <Andrew.Jackson@....com>
>>
>> If the FIFOs aren't flushed, the left/right channels may be swapped:
>> this may occur if the FIFOs are not empty when the streams start.
>>
>> Signed-off-by: Andrew Jackson <Andrew.Jackson@....com>
>> ---
>>   sound/soc/dwc/designware_i2s.c |    2 ++
>>   1 files changed, 2 insertions(+), 0 deletions(-)
>>
>> diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
>> index ef771ea..b9d6a25 100644
>> --- a/sound/soc/dwc/designware_i2s.c
>> +++ b/sound/soc/dwc/designware_i2s.c
>> @@ -228,12 +228,14 @@ static int dw_i2s_hw_params(struct snd_pcm_substream *substream,
>>   	i2s_disable_channels(dev, substream->stream);
>>
>>   	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
>> +		i2s_write_reg(dev->i2s_base, TXFFR, 1);
>>   		i2s_write_reg(dev->i2s_base, TCR(ch_reg), xfer_resolution);
>>   		i2s_write_reg(dev->i2s_base, TFCR(ch_reg), 0x02);
>>   		irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
>>   		i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x30);
>>   		i2s_write_reg(dev->i2s_base, TER(ch_reg), 1);
>>   	} else {
>> +		i2s_write_reg(dev->i2s_base, RXFFR, 1);
>>   		i2s_write_reg(dev->i2s_base, RCR(ch_reg), xfer_resolution);
>>   		i2s_write_reg(dev->i2s_base, RFCR(ch_reg), 0x07);
>>   		irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
>>
> 
> This should probably go into the prepare callback. prepare is for example 
> also called when recovering from a underrun/overrun. Whereas hwparams is 
> only called during initial setup of the stream.

That's a good idea: thank you.  I'll rework the patch with this in mind.

	Andrew

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ