[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <549095CA.7090505@broadcom.com>
Date: Tue, 16 Dec 2014 12:27:54 -0800
From: Ray Jui <rjui@...adcom.com>
To: Arnd Bergmann <arnd@...db.de>,
<linux-arm-kernel@...ts.infradead.org>
CC: Arun Ramamurthy <arun.ramamurthy@...adcom.com>,
<mark.rutland@....com>, <a.zummo@...ertech.it>,
<sbranden@...adcom.com>, <pawel.moll@....com>,
<devicetree@...r.kernel.org>, <ijc+devicetree@...lion.org.uk>,
"Arun Ramamurthy" <arunrama@...adcom.com>,
<linux-kernel@...r.kernel.org>, <grant.likely@...aro.org>,
<robh+dt@...nel.org>, <bcm-kernel-feedback-list@...adcom.com>,
<galak@...eaurora.org>, <rtc-linux@...glegroups.com>
Subject: Re: [PATCHv1] rtc: bcm-iproc: Add support for Broadcom iproc rtc
On 12/16/2014 12:19 PM, Arnd Bergmann wrote:
> On Tuesday 16 December 2014 12:05:08 Arun Ramamurthy wrote:
>> On 14-12-16 11:42 AM, Arnd Bergmann wrote:
>>> On Tuesday 16 December 2014 11:22:30 arun.ramamurthy@...adcom.com wrote:
>>>> + rtc: iproc_rtc@...3026000 {
>>>> + compatible = "brcm,iproc-rtc";
>>>> + reg = spru_bbl: <0x03026000 0xC>,
>>>> + crmu_pwr_good_status: <0x0301C02C 0x14>,
>>>> + crmu_bbl_auth: <0x03024C74 0x8>;
>>>> + interrupts = spru_rtc_periodic: <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
>>>> + spru_alarm: <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
>>>
>>> The reg properties look really random, could it be that the registers
>>> are really part of some other device that contains multiple functions?
>>>
>> This RTC block is on a battery backed logic island and is accessed
>> indirectly using the spru_bbl registers. The CRMU registers are required
>> to read the power status and write to some authentication registers.
>> Without writing to these authentication
>> registers, we cannot access any of the spru_bbl registers. In conclusion
>> I don't think the CRMU register accesses can be considered as another
>> device access. Do you agree Arnd?
>
> It sounds like CRMU is some other unit aside from the RTC. Could this
> be something like a generic system controller? I think it should
> either have its own driver or use the syscon logic if that is what
> this is.
>
Giving that CRMU has scattered, miscellaneous control logic for multiple
different peripherals, it probably makes more sense to use the syscon
logic here.
>>> Also, what do you use the labels for?
>>>
>> The labels are purely to improve readability of the device tree entry
>
> Please remove them then, they don't help at all.
>
> Arnd
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists