[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1418834727-1602-6-git-send-email-lee.jones@linaro.org>
Date: Wed, 17 Dec 2014 16:45:24 +0000
From: Lee Jones <lee.jones@...aro.org>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: lee.jones@...aro.org, kernel@...inux.com, a.zummo@...ertech.it,
rtc-linux@...glegroups.com, wim@...ana.be,
linux-watchdog@...r.kernel.org, devicetree@...r.kernel.org,
linux@...ck-us.net, arnd@...db.de
Subject: [PATCH 5/8] watchdog: bindings: Provide ST bindings for ST's LPC Watchdog device
On current ST platforms the LPC controls a number of functions including
Watchdog and Real Time Clock. This patch provides the bindings used to
configure LPC in Watchdog mode.
Signed-off-by: Lee Jones <lee.jones@...aro.org>
---
.../devicetree/bindings/watchdog/st_lpc_wdt.txt | 38 ++++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
new file mode 100644
index 0000000..1bdf023
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
@@ -0,0 +1,38 @@
+STMicroelectronics Low Power Controller (LPC) - Watchdog
+========================================================
+
+LPC currently supports Watchdog OR Real Time Clock functionality.
+
+[See: ../rtc/rtc-st-lpc.txt for RTC options]
+
+Required properties
+
+- compatible : Must be one of: "st,stih407-lpc" "st,stih416-lpc"
+ "st,stih415-lpc" "st,stid127-lpc"
+- reg : LPC registers base address + size
+- interrupts : LPC interrupt line number and associated flags
+- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt)
+- st,lpc-mode : The LPC can run either one of two modes ST_LPC_MODE_RTC [0] or
+ ST_LPC_MODE_WDT [1]. One (and only one) mode must be
+ selected.
+
+Required properties [watchdog mode]
+
+- st,syscfg : Phandle to syscfg node used to enable watchdog and configure
+ CPU reset type.
+- timeout-sec : Watchdog timeout in seconds
+
+Optional properties [watchdog mode]
+
+- st,warm-reset : If present reset type will be 'warm' - if not it will be cold
+
+Example:
+ lpc@...05000 {
+ compatible = "st,stih416-lpc-watchdog";
+ reg = <0xfde05000 0x1000>;
+ clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
+ st,syscfg = <&syscfg_core>;
+ timeout-sec = <120>;
+ st,lpc-mode = <ST_LPC_MODE_WDT>;
+ st,warm-reset;
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists