Message-ID: <5493477F.7090309@gmx.de>
Date:	Thu, 18 Dec 2014 22:30:39 +0100
From:	Hartmut Knaack <knaack.h@....de>
To:	Nikolaus Schulz <nikolaus.schulz@...onic-design.de>,
	linux-iio@...r.kernel.org, Jonathan Cameron <jic23@...nel.org>,
	Lars-Peter Clausen <lars@...afoo.de>,
	Peter Meerwald <pmeerw@...erw.net>,
	Grant Likely <grant.likely@...aro.org>,
	Rob Herring <robh+dt@...nel.org>,
	Michael Welling <mwelling@...e.org>,
	Philippe Reynes <tremyfr@...oo.fr>,
	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
CC:	Alban Bedel <alban.bedel@...onic-design.de>
Subject: Re: [PATCH v3 2/2] iio: add driver for the TI DAC8554

Nikolaus Schulz schrieb am 15.12.2014 um 12:39:
> The TI DAC8554 is a quad-channel Digital-to-Analog Converter with an SPI
> interface.
> 
> Changes in v3:
> * Small fixes in the documentation of struct dac8554_state
> * Replace some magic constants with macros
> * Replace memset on powerdown state arrays with explicit loop
> * If probing fails due to invalid DT data, return -EINVAL instead of
>   -ENODEV
> * Add driver dependency on regulator support
> * Move regulator_get_voltage call from probe time to dac8554_read_raw
> * Rename _(read|write)_raw argument "mask" to "info"
> * Make iio_chan_spec variable static
> * DT: add vendor prefix to device specific "address" property
> * Whitespace fixes
> 
> Changes in v2:
> * Use DMA-safe buffer for SPI transfer
> * Normalize powerdown_mode name "hi-z" to "three_state" as per
>   ABI/testing/sysfs-bus-iio
> * Register device late in probe function
> * Avoid powerdown broadcast update, which touches all DAC on the bus
> 
> Signed-off-by: Nikolaus Schulz <nikolaus.schulz@...onic-design.de>
Reviewed-by: Hartmut Knaack <knaack.h@....de>
> ---
>  drivers/iio/dac/Kconfig      |  11 ++
>  drivers/iio/dac/Makefile     |   1 +
>  drivers/iio/dac/ti-dac8554.c | 381 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 393 insertions(+)
>  create mode 100644 drivers/iio/dac/ti-dac8554.c
> 
> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
> index 2236ea2..d3b21c853b5 100644
> --- a/drivers/iio/dac/Kconfig
> +++ b/drivers/iio/dac/Kconfig
> @@ -181,4 +181,15 @@ config MCP4922
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called mcp4922.
>  
> +config TI_DAC8554
> +	tristate "TI DAC8554 driver"
> +	depends on SPI
> +	depends on OF
> +	depends on REGULATOR
> +	help
> +	  Say yes here to build the driver for the TI DAC8554.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called ti-dac8554.
> +
>  endmenu
> diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
> index 52be7e1..b98d79a 100644
> --- a/drivers/iio/dac/Makefile
> +++ b/drivers/iio/dac/Makefile
> @@ -20,3 +20,4 @@ obj-$(CONFIG_MAX517) += max517.o
>  obj-$(CONFIG_MAX5821) += max5821.o
>  obj-$(CONFIG_MCP4725) += mcp4725.o
>  obj-$(CONFIG_MCP4922) += mcp4922.o
> +obj-$(CONFIG_TI_DAC8554) += ti-dac8554.o
> diff --git a/drivers/iio/dac/ti-dac8554.c b/drivers/iio/dac/ti-dac8554.c
> new file mode 100644
> index 0000000..84b9f42
> --- /dev/null
> +++ b/drivers/iio/dac/ti-dac8554.c
> @@ -0,0 +1,381 @@
> +/*
> + * TI DAC8554 Digital to Analog Converter SPI driver
> + *
> + * Copyright (C) 2014 Avionic Design GmbH
> + *
> + * Based on ad5446r_spi.c
> + * Copyright (C) 2010,2011 Analog Devices Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/spi/spi.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/module.h>
> +#include <linux/iio/iio.h>
> +#include <linux/of.h>
> +
> +#define DAC8554_DRIVERNAME			"ti-dac8554"
> +#define DAC8554_DAC_CHANNELS			4
> +#define DAC8554_DATABITS			16
> +
> +/* Load commands */
> +#define DAC8554_CMD_STORE_DAC_N			0x0
> +#define DAC8554_CMD_UPDATE_DAC_N		0x1
> +#define DAC8554_CMD_STORE_DAC_N_UPDATE_ALL	0x2
> +#define DAC8554_CMD_UPDATE_BROADCAST		0x3
> +
> +#define DAC8554_BROADCAST_USE_SRDATA		0x2
> +
> +/* Powerdown modes (PD1 | PD2 bits) */
> +#define DAC8554_PWRDN_HIZ			0x0
> +#define DAC8554_PWRDN_1K			0x1
> +#define DAC8554_PWRDN_100K			0x2
> +
> +/* Input shift register composition */
> +#define DAC8554_ADDR_TO_SR(addr)		((addr) << 22)
> +#define DAC8554_CMD_TO_SR(cmd)			((cmd) << 20)
> +#define DAC8554_CHAN_TO_SR(chan)		((chan) << 17)
> +#define DAC8554_PWRDN_TO_SR(mode)		(BIT(16) | (mode) << 14)
> +
> +/**
> + * struct dac8554_state - driver instance specific data
> + * @spi:		SPI device
> + * @reg:		supply regulator
> + * @addr:		two-bit chip address
> + * @val:		channel data
> + * @powerdown:		channel powerdown flag
> + * @powerdown_mode:	channel powerdown mode
> + * @xfer:		SPI transfer buffer
> + */
> +struct dac8554_state {
> +	struct spi_device		*spi;
> +	struct regulator		*reg;
> +	unsigned			addr;
> +	u16				val[DAC8554_DAC_CHANNELS];
> +	bool				powerdown[DAC8554_DAC_CHANNELS];
> +	u8				powerdown_mode[DAC8554_DAC_CHANNELS];
> +
> +	/*
> +	 * DMA (thus cache coherency maintenance) requires the
> +	 * transfer buffers to live in their own cache lines.
> +	 */
> +	u8				xfer[3] ____cacheline_aligned;
> +};
> +
> +static int dac8554_spi_write(struct dac8554_state *st,
> +			     unsigned cmd,
> +			     unsigned chan_addr,
> +			     unsigned val)
> +{
> +	u32 data;
> +
> +	/*
> +	 * The input shift register is 24 bits wide. The 8 MSB are
> +	 * control bits, followed by 16 data bits.
> +	 * The first two bits A1 and A0 address a DAC8554 chip.
> +	 * The next two are the command bits, LD1 and LD0.
> +	 * After a don't-care-bit, the next two bits select the channel.
> +	 * The final control bit PD0 is a flag signalling if the data
> +	 * bits encode a powerdown mode. We merge PD0 with the adjacent
> +	 * data bits.
> +	 */
> +
> +	if (cmd > 3 || chan_addr > 3 ||
> +			(val > 0xffff && (val & ~DAC8554_PWRDN_TO_SR(3))))
> +		return -EINVAL;
> +
> +	data = DAC8554_ADDR_TO_SR(st->addr) | DAC8554_CMD_TO_SR(cmd) |
> +	       DAC8554_CHAN_TO_SR(chan_addr) | val;
> +
> +	st->xfer[0] = data >> 16;
> +	st->xfer[1] = data >> 8;
> +	st->xfer[2] = data;
> +
> +	return spi_write(st->spi, st->xfer, sizeof(st->xfer));
> +}
> +
> +static int dac8554_read_raw(struct iio_dev *indio_dev,
> +			    struct iio_chan_spec const *chan,
> +			    int *val,
> +			    int *val2,
> +			    long info)
> +{
> +	struct dac8554_state *st = iio_priv(indio_dev);
> +	int voltage_uv;
> +
> +	switch (info) {
> +	case IIO_CHAN_INFO_RAW:
> +		*val = st->val[chan->address];
> +		return IIO_VAL_INT;
> +	case IIO_CHAN_INFO_SCALE:
> +		voltage_uv = regulator_get_voltage(st->reg);
> +		if (voltage_uv < 0)
> +			return voltage_uv;
> +		*val = voltage_uv / 1000;
> +		*val2 = DAC8554_DATABITS;
> +		return IIO_VAL_FRACTIONAL_LOG2;
> +	}
> +	return -EINVAL;
> +}
> +
> +static int dac8554_write_raw(struct iio_dev *indio_dev,
> +			     struct iio_chan_spec const *chan,
> +			     int val,
> +			     int val2,
> +			     long info)
> +{
> +	struct dac8554_state *st = iio_priv(indio_dev);
> +	int err;
> +
> +	switch (info) {
> +	case IIO_CHAN_INFO_RAW:
> +		if (val > 0xffff || val < 0)
> +			return -EINVAL;
> +
> +		err = dac8554_spi_write(st, DAC8554_CMD_UPDATE_DAC_N,
> +					chan->address, val);
> +		if (err)
> +			return err;
> +
> +		st->val[chan->address] = val;
> +
> +		/* By hw design, DAC updates automatically trigger powerup. */
> +		st->powerdown[chan->address] = false;
> +
> +		return 0;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int dac8554_get_powerdown_mode(struct iio_dev *indio_dev,
> +				      const struct iio_chan_spec *chan)
> +{
> +	struct dac8554_state *st = iio_priv(indio_dev);
> +
> +	return st->powerdown_mode[chan->address];
> +}
> +
> +static int dac8554_set_powerdown_mode(struct iio_dev *indio_dev,
> +				      const struct iio_chan_spec *chan,
> +				      unsigned int mode)
> +{
> +	struct dac8554_state *st = iio_priv(indio_dev);
> +
> +	st->powerdown_mode[chan->address] = mode;
> +
> +	return 0;
> +}
> +
> +static ssize_t dac8554_read_dac_powerdown(struct iio_dev *indio_dev,
> +					  uintptr_t private,
> +					  const struct iio_chan_spec *chan,
> +					  char *buf)
> +{
> +	struct dac8554_state *st = iio_priv(indio_dev);
> +
> +	return sprintf(buf, "%d\n", st->powerdown[chan->address]);
> +}
> +
> +static ssize_t dac8554_write_dac_powerdown(struct iio_dev *indio_dev,
> +					   uintptr_t private,
> +					   const struct iio_chan_spec *chan,
> +					   const char *buf,
> +					   size_t len)
> +{
> +	bool powerdown;
> +	int ret;
> +	struct dac8554_state *st = iio_priv(indio_dev);
> +	u8 powerdown_mode;
> +
> +	ret = strtobool(buf, &powerdown);
> +	if (ret)
> +		return ret;
> +
> +	st->powerdown[chan->address] = powerdown;
> +
> +	if (powerdown) {
> +		powerdown_mode = st->powerdown_mode[chan->address];
> +		ret = dac8554_spi_write(st,
> +					DAC8554_CMD_UPDATE_DAC_N,
> +					chan->address,
> +					DAC8554_PWRDN_TO_SR(powerdown_mode));
> +	} else {
> +		/* Load DAC with cached value. This triggers a powerup. */
> +		ret = dac8554_spi_write(st,
> +					DAC8554_CMD_UPDATE_DAC_N,
> +					chan->address,
> +					st->val[chan->address]);
> +	}
> +
> +	if (ret)
> +		return ret;
> +
> +	return len;
> +}
> +
> +static int dac8554_powerdown(struct dac8554_state *st,
> +			     u8 powerdown_mode)
> +{
> +	int chan, cmd, ret;
> +
> +	for (chan = DAC8554_DAC_CHANNELS - 1; chan >= 0; --chan) {
> +		cmd = chan ? DAC8554_CMD_STORE_DAC_N
> +			   : DAC8554_CMD_STORE_DAC_N_UPDATE_ALL;
> +		ret = dac8554_spi_write(st, cmd, chan,
> +					DAC8554_PWRDN_TO_SR(powerdown_mode));
> +		if (ret)
> +			return ret;
> +	}
> +
> +	for (chan = 0; chan < DAC8554_DAC_CHANNELS; ++chan) {
> +		st->powerdown_mode[chan] = powerdown_mode;
> +		st->powerdown[chan] = true;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct iio_info dac8554_info = {
> +	.write_raw = dac8554_write_raw,
> +	.read_raw = dac8554_read_raw,
> +	.driver_module = THIS_MODULE,
> +};
> +
> +static const char * const dac8554_powerdown_modes[] = {
> +	"three_state",
> +	"1kohm_to_gnd",
> +	"100kohm_to_gnd"
> +};
> +
> +static const struct iio_enum dac8854_powerdown_mode_enum = {
> +	.items = dac8554_powerdown_modes,
> +	.num_items = ARRAY_SIZE(dac8554_powerdown_modes),
> +	.get = dac8554_get_powerdown_mode,
> +	.set = dac8554_set_powerdown_mode,
> +};
> +
> +static const struct iio_chan_spec_ext_info dac8554_ext_info[] = {
> +	{
> +		.name = "powerdown",
> +		.read = dac8554_read_dac_powerdown,
> +		.write = dac8554_write_dac_powerdown,
> +		.shared = IIO_SEPARATE,
> +	},
> +	IIO_ENUM("powerdown_mode", IIO_SEPARATE,
> +		 &dac8854_powerdown_mode_enum),
> +	IIO_ENUM_AVAILABLE("powerdown_mode", &dac8854_powerdown_mode_enum),
> +	{ },
> +};
> +
> +#define DAC8554_CHANNEL(chan) { \
> +	.type = IIO_VOLTAGE, \
> +	.indexed = 1, \
> +	.output = 1, \
> +	.channel = (chan), \
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> +	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> +	.address = (chan), \
> +	.ext_info = dac8554_ext_info, \
> +}
> +static const struct iio_chan_spec dac8554_channels[] = {
> +	DAC8554_CHANNEL(0),
> +	DAC8554_CHANNEL(1),
> +	DAC8554_CHANNEL(2),
> +	DAC8554_CHANNEL(3),
> +};
> +#undef DAC8554_CHANNEL
> +
> +static int dac8554_probe(struct spi_device *spi)
> +{
> +	struct dac8554_state *st;
> +	struct iio_dev *indio_dev;
> +	int ret;
> +	u32 addr;
> +
> +	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	indio_dev->dev.parent = &spi->dev;
> +	indio_dev->name = DAC8554_DRIVERNAME;
> +	indio_dev->info = &dac8554_info;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->channels = dac8554_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(dac8554_channels);
> +
> +	spi_set_drvdata(spi, indio_dev);
> +
> +	st = iio_priv(indio_dev);
> +
> +	if (!spi->dev.of_node) {
> +		dev_err(&spi->dev, "missing OF node");
> +		return -EINVAL;
> +	}
> +	ret = of_property_read_u32(spi->dev.of_node, "ti,address", &addr);
> +	if (ret || addr < 0 || addr > 2) {
> +		dev_err(&spi->dev, "no or invalid chip address");
> +		return -EINVAL;
> +	}
> +
> +	st->spi = spi;
> +	st->addr = addr;
> +
> +	st->reg = devm_regulator_get(&spi->dev, "vref");
> +	if (IS_ERR(st->reg))
> +		return PTR_ERR(st->reg);
> +
> +	ret = regulator_enable(st->reg);
> +	if (ret)
> +		return ret;
> +
> +	ret = dac8554_powerdown(st, DAC8554_PWRDN_100K);
> +	if (ret)
> +		goto error_disable_reg;
> +
> +	ret = iio_device_register(indio_dev);
> +	if (ret)
> +		goto error_disable_reg;
> +
> +	return 0;
> +
> +error_disable_reg:
> +	regulator_disable(st->reg);
> +	return ret;
> +}
> +
> +static int dac8554_remove(struct spi_device *spi)
> +{
> +	struct iio_dev *indio_dev = spi_get_drvdata(spi);
> +	struct dac8554_state *st = iio_priv(indio_dev);
> +
> +	iio_device_unregister(indio_dev);
> +	regulator_disable(st->reg);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id dac8554_of_match[] = {
> +	{ .compatible = "ti,dac8554" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, dac8554_of_match);
> +
> +static struct spi_driver dac8554_driver = {
> +	.driver = {
> +		.name = DAC8554_DRIVERNAME,
> +		.owner = THIS_MODULE,
> +		.of_match_table = dac8554_of_match,
> +	 },
> +	.probe = dac8554_probe,
> +	.remove = dac8554_remove,
> +};
> +module_spi_driver(dac8554_driver);
> +
> +MODULE_AUTHOR("Nikolaus Schulz <nikolaus.schulz@...onic-design.de>");
> +MODULE_DESCRIPTION("Texas Instruments DAC8554 SPI driver");
> +MODULE_LICENSE("GPL v2");
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists