[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1418940425-2017-3-git-send-email-m-karicheri2@ti.com>
Date: Thu, 18 Dec 2014 17:07:05 -0500
From: Murali Karicheri <m-karicheri2@...com>
To: <bhelgaas@...gle.com>, <linux-pci@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <grant.likely@...aro.org>,
<robh+dt@...nel.org>, <devicetree@...r.kernel.org>,
<arnd@...db.de>, <linux-arm-kernel@...ts.infradead.org>
CC: Murali Karicheri <m-karicheri2@...com>
Subject: [RFC v1 PATCH 2/2] PCI: update dma configuration from DT
if there is a DT node available for the root bridge's parent device,
use the dma configuration from that device node. For example, keystone
PCI devices would require dma_pfn_offset to be set correctly in the
device structure of the pci device in order to have the correct dma mask.
The DT node will have dma-ranges defined for this. This also support using
the DT property dma-coherent to allow coherent DMA operation by the
PCI device.
Signed-off-by: Murali Karicheri <m-karicheri2@...com>
---
drivers/pci/probe.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 23212f8..d7dcd6c 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -6,6 +6,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/of_pci.h>
#include <linux/pci_hotplug.h>
#include <linux/slab.h>
#include <linux/module.h>
@@ -1520,6 +1521,7 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
dev->dev.dma_mask = &dev->dma_mask;
dev->dev.dma_parms = &dev->dma_parms;
dev->dev.coherent_dma_mask = 0xffffffffull;
+ of_pci_dma_configure(dev);
pci_set_dma_max_seg_size(dev, 65536);
pci_set_dma_seg_boundary(dev, 0xffffffff);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists