linux-kernel - [PATCH V3 11/11] power: charger-manager: Support to change polling rate in runtime.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-id: <1418979323-7188-12-git-send-email-jonghwa3.lee@samsung.com>
Date:	Fri, 19 Dec 2014 17:55:23 +0900
From:	Jonghwa Lee <jonghwa3.lee@...sung.com>
To:	linux-kernel@...r.kernel.org
Cc:	linux-pm@...r.kernel.org, sre@...nel.org, dbaryshkov@...il.com,
	dwmw2@...radead.org, anton@...msg.org, pavel@....cz,
	myungjoo.ham@...sung.com, cw00.choi@...sung.com,
	Jonghwa Lee <jonghwa3.lee@...sung.com>
Subject: [PATCH V3 11/11] power: charger-manager: Support to change polling
 rate in runtime.

Add 'polling_ms' sysfs node to change charger-manager's monitoring rate
in runtime. It can set only bigger than 2 jiffies (for 200 HZ system it
is 10 msecs.) as it's allowed for minimum poling rate in previous.
It resets poller and re-configure polling rate based on new input if next
polling time is far enough. Otherwise, it just waits expiration of timer
and new polling rate will affects the next scheduling.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@...sung.com>
---
 drivers/power/charger-manager.c |   62 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c
index f5787bc..a8cabf09 100644
--- a/drivers/power/charger-manager.c
+++ b/drivers/power/charger-manager.c
@@ -1054,6 +1054,63 @@ static ssize_t charger_externally_control_store(struct device *dev,
 	return count;
 }
 
+static ssize_t show_polling_ms(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct charger_manager *cm;
+	ssize_t len;
+
+	list_for_each_entry(cm, &cm_list, entry)
+		if (cm->charger_psy.dev == dev)
+			break;
+
+	if (cm->charger_psy.dev != dev)
+		return -EINVAL;
+
+	len = sprintf(buf, "%d\n", cm->desc->polling_interval_ms);
+
+	return len;
+}
+
+static ssize_t store_polling_ms(struct device *dev,
+				struct device_attribute *attr, const char *buf,
+				size_t count)
+{
+	struct charger_manager *cm;
+	int polling_ms;
+	int ret;
+
+	ret = sscanf(buf, "%d", &polling_ms);
+	if (ret < 0 )
+		return -EINVAL;
+
+	if (polling_ms < CM_JIFFIES_SMALL * MSEC_PER_SEC / HZ)
+		return -EINVAL;
+
+	list_for_each_entry(cm, &cm_list, entry)
+		if (cm->charger_psy.dev == dev)
+			break;
+
+	if (cm->charger_psy.dev != dev)
+		return -ENODEV;
+
+	cm->desc->polling_interval_ms = polling_ms;
+
+	pr_info("Polling interval's changed to %u ms.\n",
+		cm->desc->polling_interval_ms);
+
+	if (next_polling - jiffies >
+		msecs_to_jiffies(cm->desc->polling_interval_ms)) {
+		pr_info("Reset poller now... \n");
+		cancel_delayed_work(&cm_monitor_work);
+		schedule_work(&setup_polling);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(polling_ms, 0644, show_polling_ms, store_polling_ms);
+
 /**
  * charger_manager_register_sysfs - Register sysfs entry for each charger
  * @cm: the Charger Manager representing the battery.
@@ -1077,6 +1134,11 @@ static int charger_manager_register_sysfs(struct charger_manager *cm)
 	int ret = 0;
 	int i;
 
+	/* Create polling_ms sysfs node */
+	ret = device_create_file(cm->charger_psy.dev, &dev_attr_polling_ms);
+	if (ret)
+		pr_err("Failed to create poling_ms sysfs node (%d)\n", ret);
+
 	/* Create sysfs entry to control charger(regulator) */
 	for (i = 0; i < desc->num_charger_regulators; i++) {
 		charger = &desc->charger_regulators[i];
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/