linux-kernel - [PATCH 0/2] phy: ti-pipe3: fixes for 3.19-rc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1418990720-3638-1-git-send-email-rogerq@ti.com>
Date:	Fri, 19 Dec 2014 14:05:18 +0200
From:	Roger Quadros <rogerq@...com>
To:	<kishon@...com>, <tony@...mide.com>
CC:	<nm@...com>, <balbi@...com>, <george.cherian@...com>,
	<nsekhar@...com>, <linux-omap@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, Roger Quadros <rogerq@...com>
Subject: [PATCH 0/2] phy: ti-pipe3: fixes for 3.19-rc

Hi,

During system suspend L3INIT_960M_GFCLK and L3INIT_480M_GFCLK clocks remain
active on the DRA7 platform. This is because the pipe3 driver doesn't shut
them off as part of .suspend(). Patch 1 addresses this issue.

SATA on both OMAP5 and DRA7 breaks when SATA drive is plugged in after a
system suspend/resume or if  AHCI_PLATFORM driver is used as module.
Patch 2 fixes it.

Hope to get these 2 patches in through the 3.19-rc cycle.

Tony, patch 2 touches dra7.dtsi and omap5.dts and will need your Ack.
Hopefully it can go in through Kishon's PHY tree.

cheers,
-roger

Roger Quadros (2):
  phy: ti-pipe3: Disable clocks on system suspend
  phy: ti-pipe3: Fix SATA across suspend/resume

 arch/arm/boot/dts/dra7.dtsi  |   4 +-
 arch/arm/boot/dts/omap5.dtsi |   4 +-
 drivers/phy/phy-ti-pipe3.c   | 138 +++++++++++++++++++++++++++++++++----------
 3 files changed, 111 insertions(+), 35 deletions(-)

-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/