lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1419019671-25377-2-git-send-email-bparrot@ti.com>
Date:	Fri, 19 Dec 2014 14:07:50 -0600
From:	Benoit Parrot <bparrot@...com>
To:	Linus Walleij <linus.walleij@...aro.org>
CC:	<linux-gpio@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<devicetree@...r.kernel.org>, Alexandre Courbot <gnurou@...il.com>,
	Maxime Ripard <maxime.ripard@...e-electrons.com>,
	Jiri Prchal <jiri.prchal@...ignal.cz>,
	Pantelis Antoniou <panto@...oniou-consulting.com>,
	Benoit Parrot <bparrot@...com>
Subject: [Patch v5 1/2] gpio: add GPIO hogging mechanism

Based on Boris Brezillion's work this is a reworked patch
of his initial GPIO hogging mechanism.
This patch provides a way to initially configure specific GPIO
when the GPIO controller is probed.

The actual DT scanning to collect the GPIO specific data is performed
as part of gpiochip_add().

The purpose of this is to allow specific GPIOs to be configured
without any driver specific code.
This is particularly useful because board design are getting
increasingly complex and given SoC pins can now have more
than 10 mux values, a lot of connections are now dependent on
external IO muxes to switch various modes.

Specific drivers should not necessarily need to be aware of
what accounts to a specific board implementation. This board level
"description" should be best kept as part of the dts file.

Signed-off-by: Benoit Parrot <bparrot@...com>
Reviewed-by: Alexandre Courbot <acourbot@...dia.com>
---
 drivers/gpio/gpiolib-of.c | 118 ++++++++++++++++++++++++++++++++++++++++++
 drivers/gpio/gpiolib.c    | 128 ++++++++++++++++++++++++++++++++++++++--------
 drivers/gpio/gpiolib.h    |   3 ++
 3 files changed, 229 insertions(+), 20 deletions(-)

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 604dbe6..cc33ba2 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -22,6 +22,7 @@
 #include <linux/of_gpio.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/slab.h>
+#include <linux/gpio/machine.h>
 
 #include "gpiolib.h"
 
@@ -111,6 +112,121 @@ int of_get_named_gpio_flags(struct device_node *np, const char *list_name,
 EXPORT_SYMBOL(of_get_named_gpio_flags);
 
 /**
+ * of_get_gpio_hog() - Get a GPIO hog descriptor, names and flags for GPIO API
+ * @np:		device node to get GPIO from
+ * @name:	GPIO line name
+ * @flags:	a flags pointer to fill in
+ *
+ * Returns GPIO descriptor to use with Linux GPIO API, or one of the errno
+ * value on the error condition.
+ */
+
+static struct gpio_desc *of_get_gpio_hog(struct device_node *np,
+				  const char **name,
+				  enum gpio_lookup_flags *lflags,
+				  enum gpiod_flags *dflags)
+{
+	struct device_node *chip_np;
+	enum of_gpio_flags xlate_flags;
+	struct gpio_desc *desc;
+	const char *dir_val;
+	struct gg_data gg_data = {
+		.flags = &xlate_flags,
+	};
+	u32 tmp;
+	int i, ret;
+
+	chip_np = np->parent;
+	if (!chip_np)
+		return ERR_PTR(-EINVAL);
+
+	xlate_flags = 0;
+	*lflags = 0;
+	*dflags = 0;
+
+	ret = of_property_read_u32(chip_np, "#gpio-cells", &tmp);
+	if (ret)
+		return ERR_PTR(ret);
+
+	if (tmp > MAX_PHANDLE_ARGS)
+		return ERR_PTR(-EINVAL);
+
+	gg_data.gpiospec.args_count = tmp;
+	gg_data.gpiospec.np = chip_np;
+	for (i = 0; i < tmp; i++) {
+		ret = of_property_read_u32_index(np, "gpios", i,
+					   &gg_data.gpiospec.args[i]);
+		if (ret)
+			return ERR_PTR(ret);
+	}
+
+	gpiochip_find(&gg_data, of_gpiochip_find_and_xlate);
+	if (!gg_data.out_gpio) {
+		if (np->parent == np)
+			return ERR_PTR(-ENXIO);
+		else
+			return ERR_PTR(-EPROBE_DEFER);
+	}
+
+	if (xlate_flags & OF_GPIO_ACTIVE_LOW)
+		*lflags |= GPIO_ACTIVE_LOW;
+
+	if (of_property_read_string(np, "state", &dir_val)) {
+		pr_warn("%s: GPIO:%d (%s): no hogging state specified, bailing out\n",
+			 __func__, desc_to_gpio(gg_data.out_gpio), np->name);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (!strcmp(dir_val, "input"))
+		*dflags |= GPIOD_IN;
+	else if (!strcmp(dir_val, "output-low"))
+		*dflags |= GPIOD_OUT_LOW;
+	else if (!strcmp(dir_val, "output-high"))
+		*dflags |= GPIOD_OUT_HIGH;
+	else {
+		pr_warn("%s: GPIO:%d (%s): invalid state '%s' requested, bailing out\n",
+			 __func__, desc_to_gpio(gg_data.out_gpio),
+			np->name, dir_val);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (name && of_property_read_string(np, "line-name", name))
+		*name = np->name;
+
+	desc = gg_data.out_gpio;
+
+	return desc;
+}
+
+/**
+ * of_gpiochip_scan_hogs - Scan gpio-controller and apply GPIO hog as requested
+ * @chip:	gpio chip to act on
+ *
+ * This is only used by of_gpiochip_add to request/set GPIO initial
+ * configuration.
+ */
+static void of_gpiochip_scan_hogs(struct gpio_chip *chip)
+{
+	struct gpio_desc *desc = NULL;
+	struct device_node *np;
+	const char *name;
+	enum gpio_lookup_flags lflags;
+	enum gpiod_flags dflags;
+
+	for_each_child_of_node(chip->of_node, np) {
+		if (!of_property_read_bool(np, "gpio-hog"))
+			continue;
+
+		desc = of_get_gpio_hog(np, &name, &lflags, &dflags);
+		if (IS_ERR(desc))
+			continue;
+
+		if (gpiod_hog(desc, name, lflags, dflags))
+			continue;
+	}
+}
+
+/**
  * of_gpio_simple_xlate - translate gpio_spec to the GPIO number and flags
  * @gc:		pointer to the gpio_chip structure
  * @np:		device node of the GPIO chip
@@ -302,6 +418,8 @@ void of_gpiochip_add(struct gpio_chip *chip)
 
 	of_gpiochip_add_pin_range(chip);
 	of_node_get(chip->of_node);
+
+	of_gpiochip_scan_hogs(chip);
 }
 
 void of_gpiochip_remove(struct gpio_chip *chip)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 487afe6..d79c265 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -313,6 +313,7 @@ EXPORT_SYMBOL_GPL(gpiochip_add);
 
 /* Forward-declaration */
 static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip);
+static void gpiochip_free_hogs(struct gpio_chip *chip);
 
 /**
  * gpiochip_remove() - unregister a gpio_chip
@@ -331,6 +332,7 @@ void gpiochip_remove(struct gpio_chip *chip)
 
 	gpiochip_irqchip_remove(chip);
 	gpiochip_remove_pin_ranges(chip);
+	gpiochip_free_hogs(chip);
 	of_gpiochip_remove(chip);
 
 	for (id = 0; id < chip->ngpio; id++) {
@@ -864,6 +866,7 @@ static bool __gpiod_free(struct gpio_desc *desc)
 		clear_bit(FLAG_REQUESTED, &desc->flags);
 		clear_bit(FLAG_OPEN_DRAIN, &desc->flags);
 		clear_bit(FLAG_OPEN_SOURCE, &desc->flags);
+		clear_bit(FLAG_IS_HOGGED, &desc->flags);
 		ret = true;
 	}
 
@@ -1836,6 +1839,47 @@ struct gpio_desc *__must_check __gpiod_get_optional(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(__gpiod_get_optional);
 
+
+/**
+ * __gpiod_set_helper - helper function to configure a given GPIO
+ * @desc:	gpio whose value will be assigned
+ * @con_id:	function within the GPIO consumer
+ * @lflags:	gpio_lookup_flags - returned from of_find_gpio() or
+ *		of_get_gpio_hog()
+ * @dflags:	gpiod_flags - optional GPIO initialization flags
+ *
+ * Return 0 on success, -ENOENT if no GPIO has been assigned to the
+ * requested function and/or index, or another IS_ERR() code if an error
+ * occurred while trying to acquire the GPIO.
+ */
+static int __gpiod_set_helper(struct gpio_desc *desc, const char *con_id,
+		unsigned long lflags, enum gpiod_flags dflags)
+{
+	int status;
+
+	if (lflags & GPIO_ACTIVE_LOW)
+		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
+	if (lflags & GPIO_OPEN_DRAIN)
+		set_bit(FLAG_OPEN_DRAIN, &desc->flags);
+	if (lflags & GPIO_OPEN_SOURCE)
+		set_bit(FLAG_OPEN_SOURCE, &desc->flags);
+
+	/* No particular flag request, return here... */
+	if (!(dflags & GPIOD_FLAGS_BIT_DIR_SET)) {
+		pr_debug("no flags found for %s\n", con_id);
+		return 0;
+	}
+
+	/* Process flags */
+	if (dflags & GPIOD_FLAGS_BIT_DIR_OUT)
+		status = gpiod_direction_output(desc,
+					      dflags & GPIOD_FLAGS_BIT_DIR_VAL);
+	else
+		status = gpiod_direction_input(desc);
+
+	return status;
+}
+
 /**
  * gpiod_get_index - obtain a GPIO from a multi-index GPIO function
  * @dev:	GPIO consumer, can be NULL for system-global GPIOs
@@ -1885,30 +1929,12 @@ struct gpio_desc *__must_check __gpiod_get_index(struct device *dev,
 	}
 
 	status = gpiod_request(desc, con_id);
-
 	if (status < 0)
 		return ERR_PTR(status);
 
-	if (lookupflags & GPIO_ACTIVE_LOW)
-		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
-	if (lookupflags & GPIO_OPEN_DRAIN)
-		set_bit(FLAG_OPEN_DRAIN, &desc->flags);
-	if (lookupflags & GPIO_OPEN_SOURCE)
-		set_bit(FLAG_OPEN_SOURCE, &desc->flags);
-
-	/* No particular flag request, return here... */
-	if (!(flags & GPIOD_FLAGS_BIT_DIR_SET))
-		return desc;
-
-	/* Process flags */
-	if (flags & GPIOD_FLAGS_BIT_DIR_OUT)
-		status = gpiod_direction_output(desc,
-					      flags & GPIOD_FLAGS_BIT_DIR_VAL);
-	else
-		status = gpiod_direction_input(desc);
-
+	status = __gpiod_set_helper(desc, con_id, lookupflags, flags);
 	if (status < 0) {
-		dev_dbg(dev, "setup of GPIO %s failed\n", con_id);
+		pr_debug("setup of GPIO %s failed\n", con_id);
 		gpiod_put(desc);
 		return ERR_PTR(status);
 	}
@@ -2002,6 +2028,68 @@ struct gpio_desc *__must_check __gpiod_get_index_optional(struct device *dev,
 EXPORT_SYMBOL_GPL(__gpiod_get_index_optional);
 
 /**
+ * gpiod_hog - Hog the specified GPIO desc given the provided flags
+ * @desc:	gpio whose value will be assigned
+ * @name:	gpio line name
+ * @lflags:	gpio_lookup_flags - returned from of_find_gpio() or
+ *		of_get_gpio_hog()
+ * @dflags:	gpiod_flags - optional GPIO initialization flags
+ *
+ */
+int gpiod_hog(struct gpio_desc *desc, const char *name,
+	      unsigned long lflags, enum gpiod_flags dflags)
+{
+	struct gpio_chip *chip;
+	struct gpio_desc *local_desc;
+	int hwnum;
+	int status;
+
+	chip = gpiod_to_chip(desc);
+	hwnum = gpio_chip_hwgpio(desc);
+
+	local_desc = gpiochip_request_own_desc(chip, hwnum, name);
+	if (IS_ERR(local_desc)) {
+		pr_debug("requesting own GPIO %s failed\n", name);
+		return PTR_ERR(local_desc);
+	}
+
+	status = __gpiod_set_helper(desc, name, lflags, dflags);
+	if (status < 0) {
+		pr_debug("setup of GPIO %s failed\n", name);
+		gpiochip_free_own_desc(desc);
+		return status;
+	}
+
+	/* Mark GPIO as hogged so it can be identified and removed later */
+	set_bit(FLAG_IS_HOGGED, &desc->flags);
+
+	pr_debug("%s: GPIO:%d (%s) as %s%s\n", __func__,
+		desc_to_gpio(desc), name,
+		(dflags&GPIOD_FLAGS_BIT_DIR_OUT) ? "output" : "input",
+		(dflags&GPIOD_FLAGS_BIT_DIR_OUT) ?
+		  (dflags&GPIOD_FLAGS_BIT_DIR_VAL) ? "/high" : "/low":"");
+
+	return 0;
+}
+
+/**
+ * gpiochip_free_hogs - Scan gpio-controller chip and release GPIO hog
+ * @chip:	gpio chip to act on
+ *
+ * This is only used by of_gpiochip_remove to free hogged gpios
+ *
+ */
+static void gpiochip_free_hogs(struct gpio_chip *chip)
+{
+	int id;
+
+	for (id = 0; id < chip->ngpio; id++) {
+		if (test_bit(FLAG_IS_HOGGED, &chip->desc[id].flags))
+			gpiochip_free_own_desc(&chip->desc[id]);
+	}
+}
+
+/**
  * gpiod_put - dispose of a GPIO descriptor
  * @desc:	GPIO descriptor to dispose of
  *
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index e3a5211..c62b489 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -77,6 +77,7 @@ struct gpio_desc {
 #define FLAG_OPEN_DRAIN	7	/* Gpio is open drain type */
 #define FLAG_OPEN_SOURCE 8	/* Gpio is open source type */
 #define FLAG_USED_AS_IRQ 9	/* GPIO is connected to an IRQ */
+#define FLAG_IS_HOGGED	10	/* GPIO is hogged */
 
 #define ID_SHIFT	16	/* add new flags before this one */
 
@@ -88,6 +89,8 @@ struct gpio_desc {
 
 int gpiod_request(struct gpio_desc *desc, const char *label);
 void gpiod_free(struct gpio_desc *desc);
+int gpiod_hog(struct gpio_desc *desc, const char *name,
+		unsigned long lflags, enum gpiod_flags dflags);
 
 /*
  * Return the GPIO number of the passed descriptor relative to its chip
-- 
1.8.5.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ