lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1418957250-6542-2-git-send-email-jonghwa3.lee@samsung.com>
Date:	Fri, 19 Dec 2014 11:47:21 +0900
From:	Jonghwa Lee <jonghwa3.lee@...sung.com>
To:	linux-kernel@...r.kernel.org
Cc:	linux-pm@...r.kernel.org, sre@...nel.org, dbaryshkov@...il.com,
	dwmw2@...radead.org, anton@...msg.org, pavel@....cz,
	myungjoo.ham@...sung.com, cw00.choi@...sung.com,
	Jonghwa Lee <jonghwa3.lee@...sung.com>
Subject: [PATCH RESEND v2 01/10] power: charger-manager: Use thermal subsystem
 interface only to get temperature.

It drops the way of using power_supply interface to reference battery's
temperature. Then it tries to use thermal subsystem's only. This makes driver
more simple and also can remove ifdeferies.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@...sung.com>
---
 drivers/power/Kconfig                 |    1 +
 drivers/power/charger-manager.c       |  113 ++++++++-------------------------
 include/linux/power/charger-manager.h |    3 +-
 3 files changed, 28 insertions(+), 89 deletions(-)

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 8ff2511..115d153 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -317,6 +317,7 @@ config CHARGER_MANAGER
 	bool "Battery charger manager for multiple chargers"
 	depends on REGULATOR
 	select EXTCON
+	select THERMAL
 	help
           Say Y to enable charger-manager support, which allows multiple
           chargers attached to a battery and multiple batteries attached to a
diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c
index 22246b9..b4b101c 100644
--- a/drivers/power/charger-manager.c
+++ b/drivers/power/charger-manager.c
@@ -28,13 +28,6 @@
 #include <linux/of.h>
 #include <linux/thermal.h>
 
-/*
- * Default termperature threshold for charging.
- * Every temperature units are in tenth of centigrade.
- */
-#define CM_DEFAULT_RECHARGE_TEMP_DIFF	50
-#define CM_DEFAULT_CHARGE_TEMP_MAX	500
-
 static const char * const default_event_names[] = {
 	[CM_EVENT_UNKNOWN] = "Unknown",
 	[CM_EVENT_BATT_FULL] = "Battery Full",
@@ -572,40 +565,18 @@ static int check_charging_duration(struct charger_manager *cm)
 	return ret;
 }
 
-static int cm_get_battery_temperature_by_psy(struct charger_manager *cm,
-					int *temp)
-{
-	struct power_supply *fuel_gauge;
-
-	fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
-	if (!fuel_gauge)
-		return -ENODEV;
-
-	return fuel_gauge->get_property(fuel_gauge,
-				POWER_SUPPLY_PROP_TEMP,
-				(union power_supply_propval *)temp);
-}
-
 static int cm_get_battery_temperature(struct charger_manager *cm,
 					int *temp)
 {
 	int ret;
 
-	if (!cm->desc->measure_battery_temp)
+	if (!cm->tzd_batt)
 		return -ENODEV;
 
-#ifdef CONFIG_THERMAL
-	if (cm->tzd_batt) {
-		ret = thermal_zone_get_temp(cm->tzd_batt, (unsigned long *)temp);
-		if (!ret)
-			/* Calibrate temperature unit */
-			*temp /= 100;
-	} else
-#endif
-	{
-		/* if-else continued from CONFIG_THERMAL */
-		ret = cm_get_battery_temperature_by_psy(cm, temp);
-	}
+	ret = thermal_zone_get_temp(cm->tzd_batt, (unsigned long *)temp);
+	if (!ret)
+		/* Calibrate temperature unit */
+		*temp /= 100;
 
 	return ret;
 }
@@ -623,7 +594,7 @@ static int cm_check_thermal_status(struct charger_manager *cm)
 		 * occur hazadous result. We have to handle it
 		 * depending on battery type.
 		 */
-		dev_err(cm->dev, "Failed to get battery temperature\n");
+		dev_dbg(cm->dev, "Failed to get battery temperature\n");
 		return 0;
 	}
 
@@ -1007,12 +978,11 @@ static enum power_supply_property default_charger_props[] = {
 	POWER_SUPPLY_PROP_CAPACITY,
 	POWER_SUPPLY_PROP_ONLINE,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_TEMP,
 	/*
 	 * Optional properties are:
 	 * POWER_SUPPLY_PROP_CHARGE_NOW,
 	 * POWER_SUPPLY_PROP_CURRENT_NOW,
-	 * POWER_SUPPLY_PROP_TEMP, and
-	 * POWER_SUPPLY_PROP_TEMP_AMBIENT,
 	 */
 };
 
@@ -1417,49 +1387,6 @@ err:
 	return ret;
 }
 
-static int cm_init_thermal_data(struct charger_manager *cm,
-		struct power_supply *fuel_gauge)
-{
-	struct charger_desc *desc = cm->desc;
-	union power_supply_propval val;
-	int ret;
-
-	/* Verify whether fuel gauge provides battery temperature */
-	ret = fuel_gauge->get_property(fuel_gauge,
-					POWER_SUPPLY_PROP_TEMP, &val);
-
-	if (!ret) {
-		cm->charger_psy.properties[cm->charger_psy.num_properties] =
-				POWER_SUPPLY_PROP_TEMP;
-		cm->charger_psy.num_properties++;
-		cm->desc->measure_battery_temp = true;
-	}
-#ifdef CONFIG_THERMAL
-	if (ret && desc->thermal_zone) {
-		cm->tzd_batt =
-			thermal_zone_get_zone_by_name(desc->thermal_zone);
-		if (IS_ERR(cm->tzd_batt))
-			return PTR_ERR(cm->tzd_batt);
-
-		/* Use external thermometer */
-		cm->charger_psy.properties[cm->charger_psy.num_properties] =
-				POWER_SUPPLY_PROP_TEMP_AMBIENT;
-		cm->charger_psy.num_properties++;
-		cm->desc->measure_battery_temp = true;
-		ret = 0;
-	}
-#endif
-	if (cm->desc->measure_battery_temp) {
-		/* NOTICE : Default allowable minimum charge temperature is 0 */
-		if (!desc->temp_max)
-			desc->temp_max = CM_DEFAULT_CHARGE_TEMP_MAX;
-		if (!desc->temp_diff)
-			desc->temp_diff = CM_DEFAULT_RECHARGE_TEMP_DIFF;
-	}
-
-	return ret;
-}
-
 static struct of_device_id charger_manager_match[] = {
 	{
 		.compatible = "charger-manager",
@@ -1474,6 +1401,7 @@ static struct charger_desc *of_cm_parse_desc(struct device *dev)
 	u32 poll_mode = CM_POLL_DISABLE;
 	u32 battery_stat = CM_NO_BATTERY;
 	int num_chgs = 0;
+	bool monitor_temp = false;
 
 	desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL);
 	if (!desc)
@@ -1517,14 +1445,16 @@ static struct charger_desc *of_cm_parse_desc(struct device *dev)
 
 	of_property_read_string(np, "cm-fuel-gauge", &desc->psy_fuel_gauge);
 
-	of_property_read_string(np, "cm-thermal-zone", &desc->thermal_zone);
-
-	of_property_read_u32(np, "cm-battery-cold", &desc->temp_min);
-	if (of_get_property(np, "cm-battery-cold-in-minus", NULL))
-		desc->temp_min *= -1;
-	of_property_read_u32(np, "cm-battery-hot", &desc->temp_max);
+	if (!of_property_read_u32(np, "cm-battery-cold", &desc->temp_min))
+		monitor_temp = true;
+	if (!of_property_read_u32(np, "cm-battery-hot", &desc->temp_max))
+		monitor_temp = true;
 	of_property_read_u32(np, "cm-battery-temp-diff", &desc->temp_diff);
 
+	if (monitor_temp && of_property_read_string(np,
+				"cm-thermal-zone", &desc->thermal_zone))
+		desc->thermal_zone = desc->psy_fuel_gauge;
+
 	of_property_read_u32(np, "cm-charging-max",
 				&desc->charging_max_duration_ms);
 	of_property_read_u32(np, "cm-discharging-max",
@@ -1733,7 +1663,16 @@ static int charger_manager_probe(struct platform_device *pdev)
 		cm->charger_psy.num_properties++;
 	}
 
-	ret = cm_init_thermal_data(cm, fuel_gauge);
+	if (desc->thermal_zone) {
+		cm->tzd_batt =
+			thermal_zone_get_zone_by_name(desc->thermal_zone);
+		if (!cm->tzd_batt) {
+			pr_err("Failed to get thermal zone (%s).\n",
+				desc->thermal_zone);
+			return -ENODEV;
+		}
+	}
+
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to initialize thermal data\n");
 		cm->desc->measure_battery_temp = false;
diff --git a/include/linux/power/charger-manager.h b/include/linux/power/charger-manager.h
index 416ebeb..29d9b19 100644
--- a/include/linux/power/charger-manager.h
+++ b/include/linux/power/charger-manager.h
@@ -231,9 +231,8 @@ struct charger_manager {
 	struct device *dev;
 	struct charger_desc *desc;
 
-#ifdef CONFIG_THERMAL
 	struct thermal_zone_device *tzd_batt;
-#endif
+
 	bool charger_enabled;
 
 	unsigned long fullbatt_vchk_jiffies_at;
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ