[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGVrzcbCCV_AL48R3iTGQqvdAM6NWuC1yDW5P+eh7rExE3fcow@mail.gmail.com>
Date: Sat, 20 Dec 2014 09:08:51 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: Lennart Sorensen <lsorense@...lub.uwaterloo.ca>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"David S. Miller" <davem@...emloft.net>,
netdev <netdev@...r.kernel.org>,
linuxppc-dev <linuxppc-dev@...ts.ozlabs.org>,
Li Yang <leoli@...escale.com>
Subject: Re: net: ucc: tbi phy detection broken by 058112c7efc9ef43bb511c137293dddbe6e42908
2014-12-18 19:49 GMT-08:00 Lennart Sorensen <lsorense@...lub.uwaterloo.ca>:
> I have been trying to move an 8360 based system from a 3.0 kernel to a
> 3.12 (on the way to 3.14 with ipipe/xenomai) kernel and encountered an
> oops in the ucc_geth driver when using RTBI mode on one of the ucc
> ports. I haven't managed to find any commits to of_mdio or ucc_geth or
> fsl_pq_mdio that would appear to address this problem, so I believe it
> is still present in the latest kernel, but have not confirmed that with
> testing yet.
>
> Commit 058112c7efc9ef43bb511c137293dddbe6e42908 appears to have broken
> ucc support for tbi phy detection.
>
> With the patch in place, I am unable to get the mdio bus to create phy
> devices for the tbi phy in the ucc on an 8360e, and the ucc_geth driver
> causes a kernel oops, while with the patch reverted, it does create them
> and the driver comes up and works.
>
> The tbi phy is needed when using a ucc in RTBI, TBI or SGMII mode.
>
> I am not convinced that the tbi phy really behaves quite like a real phy,
> which may be why get_phy_device does not work with it. Perhaps there
> is a better way to deal with the tbi phy on the ucc for this purpose.
There are some comments in ucc_geth that also lead me to believe this
is a just a hack instead of a real Ethernet PHY device. Part of what I
think got broken is because of this comment:
/* Initialize TBI PHY interface for communicating with the
* SERDES lynx PHY on the chip. We communicate with this PHY
* through the MDIO bus on each controller, treating it as a
* "normal" PHY at the address found in the UTBIPA register. We assume
* that the UTBIPA register is valid. Either the MDIO bus code will set
* it to a value that doesn't conflict with other PHYs on the bus, or the
* value doesn't matter, as there are no other PHYs on the bus.
*/
In particular this one:
"Either the MDIO bus code will set
* it to a value that doesn't conflict with other PHYs on the bus, or the
* value doesn't matter, as there are no other PHYs on the bus."
and what Sebastian removed did exactly that, we used the special MDIO
broadcast address 0 to provide this "whatever". If this is such a
requirement from the ucc_geth driver and TBI PHYs, maybe we should
have this hack somewhere in the actual MDIO driver used by the
ucc_geth driver instead, or set a flag/read the PHY connection mode
and do this in drivers/of/of_mdio.c
>
> Certainly as it is, this patch has caused a regression though, although
> probably not very many systems with ucc ports actually use one of the
> affected modes so the damage isn't that great.
>
> --
> Len Sorensen
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists