linux-kernel - [PATCH v8 1/2] drivers/gpio: Altera soft IP GPIO driver device tree binding

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1419409345-8297-2-git-send-email-thloh@altera.com>
Date:	Wed, 24 Dec 2014 00:22:24 -0800
From:	<thloh@...era.com>
To:	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	"Ian Campbell" <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Linus Walleij <linus.walleij@...aro.org>,
	Alexandre Courbot <gnurou@...il.com>,
	Grant Likely <grant.likely@...aro.org>,
	Andrew Morton <akpm@...ux-foundation.org>,
	"David S. Miller" <davem@...emloft.net>,
	"Greg Kroah-Hartman" <gregkh@...uxfoundation.org>,
	Joe Perches <joe@...ches.com>,
	Mauro Carvalho Chehab <mchehab@....samsung.com>,
	Antti Palosaari <crope@....fi>, <devicetree@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <linux-gpio@...r.kernel.org>
CC:	Dinh Nguyen <dinguyen@...era.com>, Tien Hock Loh <thloh@...era.com>
Subject: [PATCH v8 1/2] drivers/gpio: Altera soft IP GPIO driver device tree binding

From: Tien Hock Loh <thloh@...era.com>

Adds a new driver device tree binding for Altera soft GPIO IP

Signed-off-by: Tien Hock Loh <thloh@...era.com>
---
 .../devicetree/bindings/gpio/gpio-altera.txt       |   43 ++++++++++++++++++++
 1 files changed, 43 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-altera.txt

diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera.txt b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
new file mode 100644
index 0000000..649fa02
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
@@ -0,0 +1,43 @@
+Altera GPIO controller bindings
+
+Required properties:
+- compatible:
+  - "altr,pio-1.0"
+- reg: Physical base address and length of the controller's registers.
+- #gpio-cells : Should be 2
+  - The first cell is the gpio offset number.
+  - The second cell is reserved and is currently unused.
+- gpio-controller : Marks the device node as a GPIO controller.
+- interrupt-controller: Mark the device node as an interrupt controller
+- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
+  - The first cell is the GPIO offset number within the GPIO controller.
+- interrupts: Specify the interrupt.
+- altr,interrupt-trigger: Specifies the interrupt trigger type the GPIO
+  hardware is synthesized. This field is required if the Altera GPIO controller
+  used has IRQ enabled as the interrupt type is not software controlled,
+  but hardware synthesized. Required if GPIO is used as an interrupt
+  controller. The value is defined in <dt-bindings/interrupt-controller/irq.h>
+  Only the following flags are supported:
+    IRQ_TYPE_EDGE_RISING
+    IRQ_TYPE_EDGE_FALLING
+    IRQ_TYPE_EDGE_BOTH
+    IRQ_TYPE_LEVEL_HIGH
+
+Optional properties:
+- altr,ngpio: Width of the GPIO bank. This defines how many pins the
+  GPIO device has. Ranges between 1-32. Optional and defaults to 32 is not
+  specified.
+
+Example:
+
+gpio_altr: gpio@...f200000 {
+	compatible = "altr,pio-1.0";
+	reg = <0xff200000 0x10>;
+	interrupts = <0 45 4>;
+	altr,ngpio = <32>;
+	altr,interrupt_trigger = <IRQ_TYPE_EDGE_RISING>;
+	#gpio-cells = <1>;
+	gpio-controller;
+	#interrupt-cells = <1>;
+	interrupt-controller;
+};
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/