| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1419843140-21281-1-git-send-email-k.kozlowski@samsung.com>
Date: Mon, 29 Dec 2014 09:52:20 +0100
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Kukjin Kim <kgene@...nel.org>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
Kyungmin Park <kyungmin.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>
Subject: [PATCH] ARM: dts: exynos4412-trats2: Add suspend configuration for
max77686 regulators
Add suspend to RAM configuration for max77686 regulators. Some LDOs and
bucks are disabled. This reduces energy consumption during S2R,
approximately from 17 mA to 9 mA.
Additionally remove old and not supported bindings:
- regulator-mem-off
- regulator-mem-idle
- regulator-mem-on
The max77686 driver does not parse them and they are not documented
anywere.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@...labora.co.uk>
Reviewed-by: Chanwoo Choi <cw00.choi@...sung.com>
---
Previously this was part of [1] patchset. There were no changes in this
patch since last version (v6) of that patchset.
[1] https://lkml.org/lkml/2014/10/29/261
---
arch/arm/boot/dts/exynos4412-trats2.dts | 72 +++++++++++++++++++--------------
1 file changed, 42 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 29231b452643..c9b70b6fdaf2 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -225,7 +225,6 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
- regulator-mem-on;
};
ldo2_reg: ldo2 {
@@ -234,7 +233,9 @@
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
- regulator-mem-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo3_reg: ldo3 {
@@ -243,7 +244,6 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
- regulator-mem-on;
};
ldo4_reg: ldo4 {
@@ -252,7 +252,6 @@
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
- regulator-mem-on;
};
ldo5_reg: ldo5 {
@@ -261,7 +260,6 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
- regulator-mem-on;
};
ldo6_reg: ldo6 {
@@ -270,7 +268,9 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
- regulator-mem-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo7_reg: ldo7 {
@@ -279,7 +279,9 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
- regulator-mem-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo8_reg: ldo8 {
@@ -287,7 +289,9 @@
regulator-name = "VMIPI_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo9_reg: ldo9 {
@@ -295,7 +299,6 @@
regulator-name = "CAM_ISP_MIPI_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- regulator-mem-idle;
};
ldo10_reg: ldo10 {
@@ -303,7 +306,9 @@
regulator-name = "VMIPI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo11_reg: ldo11 {
@@ -312,7 +317,9 @@
regulator-min-microvolt = <1950000>;
regulator-max-microvolt = <1950000>;
regulator-always-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo12_reg: ldo12 {
@@ -320,7 +327,9 @@
regulator-name = "VUOTG_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo13_reg: ldo13 {
@@ -328,7 +337,6 @@
regulator-name = "NFC_AVDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-idle;
};
ldo14_reg: ldo14 {
@@ -337,7 +345,9 @@
regulator-min-microvolt = <1950000>;
regulator-max-microvolt = <1950000>;
regulator-always-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo15_reg: ldo15 {
@@ -345,7 +355,9 @@
regulator-name = "VHSIC_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo16_reg: ldo16 {
@@ -353,7 +365,9 @@
regulator-name = "VHSIC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo17_reg: ldo17 {
@@ -361,7 +375,6 @@
regulator-name = "CAM_SENSOR_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- regulator-mem-idle;
};
ldo18_reg: ldo18 {
@@ -369,7 +382,6 @@
regulator-name = "CAM_ISP_SEN_IO_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-idle;
};
ldo19_reg: ldo19 {
@@ -377,7 +389,6 @@
regulator-name = "VT_CAM_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-idle;
};
ldo20_reg: ldo20 {
@@ -385,7 +396,6 @@
regulator-name = "VDDQ_PRE_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-idle;
};
ldo21_reg: ldo21 {
@@ -393,7 +403,6 @@
regulator-name = "VTF_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-mem-idle;
};
ldo22_reg: ldo22 {
@@ -408,7 +417,6 @@
regulator-name = "TSP_AVDD_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-mem-idle;
};
ldo24_reg: ldo24 {
@@ -416,7 +424,6 @@
regulator-name = "TSP_VDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-idle;
};
ldo25_reg: ldo25 {
@@ -424,7 +431,6 @@
regulator-name = "LCD_VCC_3.3V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-mem-idle;
};
ldo26_reg: ldo26 {
@@ -432,7 +438,6 @@
regulator-name = "MOTOR_VCC_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- regulator-mem-idle;
};
buck1_reg: buck1 {
@@ -442,7 +447,9 @@
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck2_reg: buck2 {
@@ -452,7 +459,9 @@
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
buck3_reg: buck3 {
@@ -462,7 +471,9 @@
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck4_reg: buck4 {
@@ -471,7 +482,9 @@
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck5_reg: buck5 {
@@ -510,7 +523,6 @@
regulator-name = "CAM_ISP_CORE_1.2V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1200000>;
- regulator-mem-off;
};
};
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists