[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1419988621-2919-6-git-send-email-dudl@cypress.com>
Date: Wed, 31 Dec 2014 09:16:54 +0800
From: Dudley Du <dudl@...ress.com>
To: dmitry.torokhov@...il.com, jmmahler@...il.com, rydberg@...omail.se
Cc: Dudley Du <dudl@...ress.com>, bleung@...gle.com,
linux-input@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v17 05/12] input: cyapa: add sysfs interfaces support in the cyapa driver
Add device's basic control and features supported in cyapa driver through
sysfs file system interfaces. These interfaces are commonly used in
pre- and after production, for trackpad device state checking, managing
and firmware image updating.
These interfaces including mode, firmware_version and product_id interfaces
for reading firmware version and trackpad device product id values,
and including update_fw interface to command firmware image update
process. Also including baseline and calibrate interfaces for
reading and checking trackpad device's sensors states.
TEST=test on Chromebooks.
Signed-off-by: Dudley Du <dudl@...ress.com>
---
drivers/input/mouse/cyapa.c | 302 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 302 insertions(+)
diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
index 080b93f..e4d1a4d 100644
--- a/drivers/input/mouse/cyapa.c
+++ b/drivers/input/mouse/cyapa.c
@@ -32,6 +32,8 @@
#define CYAPA_ADAPTER_FUNC_SMBUS 2
#define CYAPA_ADAPTER_FUNC_BOTH 3
+#define CYAPA_FW_NAME "cyapa.bin"
+
const char product_id[] = "CYTRA";
static int cyapa_reinitialize(struct cyapa *cyapa);
@@ -475,6 +477,29 @@ static int cyapa_create_input_dev(struct cyapa *cyapa)
return 0;
}
+static void cyapa_enable_irq_for_cmd(struct cyapa *cyapa)
+{
+ struct input_dev *input = cyapa->input;
+
+ if (!input || !input->users) {
+ if (cyapa->operational)
+ cyapa->ops->set_power_mode(cyapa,
+ PWR_MODE_FULL_ACTIVE, 0);
+ enable_irq(cyapa->client->irq);
+ }
+}
+
+static void cyapa_disable_irq_for_cmd(struct cyapa *cyapa)
+{
+ struct input_dev *input = cyapa->input;
+
+ if (!input || !input->users) {
+ disable_irq(cyapa->client->irq);
+ if (cyapa->operational)
+ cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0);
+ }
+}
+
/*
* cyapa_sleep_time_to_pwr_cmd and cyapa_pwr_cmd_to_sleep_time
*
@@ -858,6 +883,270 @@ static int cyapa_start_runtime(struct cyapa *cyapa)
static inline int cyapa_start_runtime(struct cyapa *cyapa) { return 0; }
#endif /* CONFIG_PM_RUNTIME */
+static ssize_t cyapa_show_fm_ver(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int error;
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+
+ error = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (error)
+ return error;
+ error = scnprintf(buf, PAGE_SIZE, "%d.%d\n", cyapa->fw_maj_ver,
+ cyapa->fw_min_ver);
+ mutex_unlock(&cyapa->state_sync_lock);
+ return error;
+}
+
+static ssize_t cyapa_show_product_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+ int size;
+ int error;
+
+ error = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (error)
+ return error;
+ size = scnprintf(buf, PAGE_SIZE, "%s\n", cyapa->product_id);
+ mutex_unlock(&cyapa->state_sync_lock);
+ return size;
+}
+
+static int cyapa_firmware(struct cyapa *cyapa, const char *fw_name)
+{
+ struct device *dev = &cyapa->client->dev;
+ const struct firmware *fw;
+ int error;
+
+ error = request_firmware(&fw, fw_name, dev);
+ if (error) {
+ dev_err(dev, "Could not load firmware from %s: %d\n",
+ fw_name, error);
+ return error;
+ }
+
+ error = cyapa->ops->check_fw(cyapa, fw);
+ if (error) {
+ dev_err(dev, "Invalid CYAPA firmware image: %s\n",
+ fw_name);
+ goto done;
+ }
+
+ /*
+ * Resume the potentially suspended device because doing FW
+ * update on a device not in the FULL mode has a chance to
+ * fail.
+ */
+ pm_runtime_get_sync(dev);
+
+ /* Require IRQ support for firmware update commands. */
+ cyapa_enable_irq_for_cmd(cyapa);
+
+ error = cyapa->ops->bl_enter(cyapa);
+ if (error) {
+ dev_err(dev, "bl_enter failed, %d\n", error);
+ goto err_detect;
+ }
+
+ error = cyapa->ops->bl_activate(cyapa);
+ if (error) {
+ dev_err(dev, "bl_activate failed, %d\n", error);
+ goto err_detect;
+ }
+
+ error = cyapa->ops->bl_initiate(cyapa, fw);
+ if (error) {
+ dev_err(dev, "bl_initiate failed, %d\n", error);
+ goto err_detect;
+ }
+
+ error = cyapa->ops->update_fw(cyapa, fw);
+ if (error) {
+ dev_err(dev, "update_fw failed, %d\n", error);
+ goto err_detect;
+ }
+
+err_detect:
+ cyapa_disable_irq_for_cmd(cyapa);
+ pm_runtime_put_noidle(dev);
+
+done:
+ release_firmware(fw);
+ return error;
+}
+
+static ssize_t cyapa_update_fw_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+ char fw_name[NAME_MAX];
+ int ret, error;
+
+ if (count > NAME_MAX) {
+ dev_err(dev, "File name too long\n");
+ return -EINVAL;
+ }
+
+ memcpy(fw_name, buf, count);
+ if (fw_name[count - 1] == '\n')
+ fw_name[count - 1] = '\0';
+ else
+ fw_name[count] = '\0';
+
+ if (cyapa->input) {
+ /*
+ * Force the input device to be registered after the firmware
+ * image is updated, so if the corresponding parameters updated
+ * in the new firmware image can taken effect immediately.
+ */
+ input_unregister_device(cyapa->input);
+ cyapa->operational = false;
+ cyapa->input = NULL;
+ }
+
+ error = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (error) {
+ /*
+ * Whatever, do reinitialize to try to recover TP state to
+ * previous state just as it entered fw update entrance.
+ */
+ cyapa_reinitialize(cyapa);
+ return error;
+ }
+
+ error = cyapa_firmware(cyapa, fw_name);
+ if (error)
+ dev_err(dev, "firmware update failed: %d\n", error);
+ else
+ dev_dbg(dev, "firmware update successfully done.\n");
+
+ /*
+ * Redetect trackpad device states because firmware update process
+ * will reset trackpad device into bootloader mode.
+ */
+ ret = cyapa_reinitialize(cyapa);
+ if (ret) {
+ dev_err(dev, "failed to redetect after updated: %d\n", ret);
+ error = error ? error : ret;
+ }
+
+ mutex_unlock(&cyapa->state_sync_lock);
+
+ return error ? error : count;
+}
+
+static ssize_t cyapa_calibrate_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+ int error;
+
+ error = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (error)
+ return error;
+
+ if (cyapa->operational) {
+ cyapa_enable_irq_for_cmd(cyapa);
+ error = cyapa->ops->calibrate_store(dev, attr, buf, count);
+ cyapa_disable_irq_for_cmd(cyapa);
+ } else {
+ error = -EBUSY; /* Still running in bootloader mode. */
+ }
+
+ mutex_unlock(&cyapa->state_sync_lock);
+ return error < 0 ? error : count;
+}
+
+static ssize_t cyapa_show_baseline(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+ ssize_t error;
+
+ error = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (error)
+ return error;
+
+ if (cyapa->operational) {
+ cyapa_enable_irq_for_cmd(cyapa);
+ error = cyapa->ops->show_baseline(dev, attr, buf);
+ cyapa_disable_irq_for_cmd(cyapa);
+ } else {
+ error = -EBUSY; /* Still running in bootloader mode. */
+ }
+
+ mutex_unlock(&cyapa->state_sync_lock);
+ return error;
+}
+
+static char *cyapa_state_to_string(struct cyapa *cyapa)
+{
+ switch (cyapa->state) {
+ case CYAPA_STATE_BL_BUSY:
+ return "bootloader busy";
+ case CYAPA_STATE_BL_IDLE:
+ return "bootloader idle";
+ case CYAPA_STATE_BL_ACTIVE:
+ return "bootloader active";
+ case CYAPA_STATE_GEN5_BL:
+ return "bootloader";
+ case CYAPA_STATE_OP:
+ case CYAPA_STATE_GEN5_APP:
+ return "operational"; /* Normal valid state. */
+ default:
+ return "invalid mode";
+ }
+}
+
+static ssize_t cyapa_show_mode(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+ int size;
+ int error;
+
+ error = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (error)
+ return error;
+
+ size = scnprintf(buf, PAGE_SIZE, "gen%d %s\n",
+ cyapa->gen, cyapa_state_to_string(cyapa));
+
+ mutex_unlock(&cyapa->state_sync_lock);
+ return size;
+}
+
+static DEVICE_ATTR(firmware_version, S_IRUGO, cyapa_show_fm_ver, NULL);
+static DEVICE_ATTR(product_id, S_IRUGO, cyapa_show_product_id, NULL);
+static DEVICE_ATTR(update_fw, S_IWUSR, NULL, cyapa_update_fw_store);
+static DEVICE_ATTR(baseline, S_IRUGO, cyapa_show_baseline, NULL);
+static DEVICE_ATTR(calibrate, S_IWUSR, NULL, cyapa_calibrate_store);
+static DEVICE_ATTR(mode, S_IRUGO, cyapa_show_mode, NULL);
+
+static struct attribute *cyapa_sysfs_entries[] = {
+ &dev_attr_firmware_version.attr,
+ &dev_attr_product_id.attr,
+ &dev_attr_update_fw.attr,
+ &dev_attr_baseline.attr,
+ &dev_attr_calibrate.attr,
+ &dev_attr_mode.attr,
+ NULL,
+};
+
+static const struct attribute_group cyapa_sysfs_group = {
+ .attrs = cyapa_sysfs_entries,
+};
+
+static void cyapa_remove_sysfs_group(void *data)
+{
+ struct cyapa *cyapa = data;
+
+ sysfs_remove_group(&cyapa->client->dev.kobj, &cyapa_sysfs_group);
+}
+
static int cyapa_probe(struct i2c_client *client,
const struct i2c_device_id *dev_id)
{
@@ -897,6 +1186,19 @@ static int cyapa_probe(struct i2c_client *client,
return error;
}
+ error = sysfs_create_group(&client->dev.kobj, &cyapa_sysfs_group);
+ if (error) {
+ dev_err(dev, "failed to create sysfs entries: %d\n", error);
+ return error;
+ }
+
+ error = devm_add_action(dev, cyapa_remove_sysfs_group, cyapa);
+ if (error) {
+ cyapa_remove_sysfs_group(cyapa);
+ dev_err(dev, "failed to add sysfs cleanup action: %d\n", error);
+ return error;
+ }
+
error = cyapa_prepare_wakeup_controls(cyapa);
if (error) {
dev_err(dev, "failed to prepare wakeup controls: %d\n", error);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists